diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aic7xxx/aic7xxx.h | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx.h')
-rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx.h | 1352 |
1 files changed, 1352 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h new file mode 100644 index 0000000..8ff16fd --- /dev/null +++ b/drivers/scsi/aic7xxx/aic7xxx.h @@ -0,0 +1,1352 @@ +/* + * Core definitions and data structures shareable across OS platforms. + * + * Copyright (c) 1994-2001 Justin T. Gibbs. + * Copyright (c) 2000-2001 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#79 $ + * + * $FreeBSD$ + */ + +#ifndef _AIC7XXX_H_ +#define _AIC7XXX_H_ + +/* Register Definitions */ +#include "aic7xxx_reg.h" + +/************************* Forward Declarations *******************************/ +struct ahc_platform_data; +struct scb_platform_data; +struct seeprom_descriptor; + +/****************************** Useful Macros *********************************/ +#ifndef MAX +#define MAX(a,b) (((a) > (b)) ? (a) : (b)) +#endif + +#ifndef MIN +#define MIN(a,b) (((a) < (b)) ? (a) : (b)) +#endif + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array)) + +#define ALL_CHANNELS '\0' +#define ALL_TARGETS_MASK 0xFFFF +#define INITIATOR_WILDCARD (~0) + +#define SCSIID_TARGET(ahc, scsiid) \ + (((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \ + >> TID_SHIFT) +#define SCSIID_OUR_ID(scsiid) \ + ((scsiid) & OID) +#define SCSIID_CHANNEL(ahc, scsiid) \ + ((((ahc)->features & AHC_TWIN) != 0) \ + ? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \ + : 'A') +#define SCB_IS_SCSIBUS_B(ahc, scb) \ + (SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B') +#define SCB_GET_OUR_ID(scb) \ + SCSIID_OUR_ID((scb)->hscb->scsiid) +#define SCB_GET_TARGET(ahc, scb) \ + SCSIID_TARGET((ahc), (scb)->hscb->scsiid) +#define SCB_GET_CHANNEL(ahc, scb) \ + SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) +#define SCB_GET_LUN(scb) \ + ((scb)->hscb->lun & LID) +#define SCB_GET_TARGET_OFFSET(ahc, scb) \ + (SCB_GET_TARGET(ahc, scb) + (SCB_IS_SCSIBUS_B(ahc, scb) ? 8 : 0)) +#define SCB_GET_TARGET_MASK(ahc, scb) \ + (0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb))) +#ifdef AHC_DEBUG +#define SCB_IS_SILENT(scb) \ + ((ahc_debug & AHC_SHOW_MASKED_ERRORS) == 0 \ + && (((scb)->flags & SCB_SILENT) != 0)) +#else +#define SCB_IS_SILENT(scb) \ + (((scb)->flags & SCB_SILENT) != 0) +#endif +#define TCL_TARGET_OFFSET(tcl) \ + ((((tcl) >> 4) & TID) >> 4) +#define TCL_LUN(tcl) \ + (tcl & (AHC_NUM_LUNS - 1)) +#define BUILD_TCL(scsiid, lun) \ + ((lun) | (((scsiid) & TID) << 4)) + +#ifndef AHC_TARGET_MODE +#undef AHC_TMODE_ENABLE +#define AHC_TMODE_ENABLE 0 +#endif + +/**************************** Driver Constants ********************************/ +/* + * The maximum number of supported targets. + */ +#define AHC_NUM_TARGETS 16 + +/* + * The maximum number of supported luns. + * The identify message only supports 64 luns in SPI3. + * You can have 2^64 luns when information unit transfers are enabled, + * but it is doubtful this driver will ever support IUTs. + */ +#define AHC_NUM_LUNS 64 + +/* + * The maximum transfer per S/G segment. + */ +#define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */ + +/* + * The maximum amount of SCB storage in hardware on a controller. + * This value represents an upper bound. Controllers vary in the number + * they actually support. + */ +#define AHC_SCB_MAX 255 + +/* + * The maximum number of concurrent transactions supported per driver instance. + * Sequencer Control Blocks (SCBs) store per-transaction information. Although + * the space for SCBs on the host adapter varies by model, the driver will + * page the SCBs between host and controller memory as needed. We are limited + * to 253 because: + * 1) The 8bit nature of the RISC engine holds us to an 8bit value. + * 2) We reserve one value, 255, to represent the invalid element. + * 3) Our input queue scheme requires one SCB to always be reserved + * in advance of queuing any SCBs. This takes us down to 254. + * 4) To handle our output queue correctly on machines that only + * support 32bit stores, we must clear the array 4 bytes at a + * time. To avoid colliding with a DMA write from the sequencer, + * we must be sure that 4 slots are empty when we write to clear + * the queue. This reduces us to 253 SCBs: 1 that just completed + * and the known three additional empty slots in the queue that + * precede it. + */ +#define AHC_MAX_QUEUE 253 + +/* + * The maximum amount of SCB storage we allocate in host memory. This + * number should reflect the 1 additional SCB we require to handle our + * qinfifo mechanism. + */ +#define AHC_SCB_MAX_ALLOC (AHC_MAX_QUEUE+1) + +/* + * Ring Buffer of incoming target commands. + * We allocate 256 to simplify the logic in the sequencer + * by using the natural wrap point of an 8bit counter. + */ +#define AHC_TMODE_CMDS 256 + +/* Reset line assertion time in us */ +#define AHC_BUSRESET_DELAY 25 + +/******************* Chip Characteristics/Operating Settings *****************/ +/* + * Chip Type + * The chip order is from least sophisticated to most sophisticated. + */ +typedef enum { + AHC_NONE = 0x0000, + AHC_CHIPID_MASK = 0x00FF, + AHC_AIC7770 = 0x0001, + AHC_AIC7850 = 0x0002, + AHC_AIC7855 = 0x0003, + AHC_AIC7859 = 0x0004, + AHC_AIC7860 = 0x0005, + AHC_AIC7870 = 0x0006, + AHC_AIC7880 = 0x0007, + AHC_AIC7895 = 0x0008, + AHC_AIC7895C = 0x0009, + AHC_AIC7890 = 0x000a, + AHC_AIC7896 = 0x000b, + AHC_AIC7892 = 0x000c, + AHC_AIC7899 = 0x000d, + AHC_VL = 0x0100, /* Bus type VL */ + AHC_EISA = 0x0200, /* Bus type EISA */ + AHC_PCI = 0x0400, /* Bus type PCI */ + AHC_BUS_MASK = 0x0F00 +} ahc_chip; + +/* + * Features available in each chip type. + */ +typedef enum { + AHC_FENONE = 0x00000, + AHC_ULTRA = 0x00001, /* Supports 20MHz Transfers */ + AHC_ULTRA2 = 0x00002, /* Supports 40MHz Transfers */ + AHC_WIDE = 0x00004, /* Wide Channel */ + AHC_TWIN = 0x00008, /* Twin Channel */ + AHC_MORE_SRAM = 0x00010, /* 80 bytes instead of 64 */ + AHC_CMD_CHAN = 0x00020, /* Has a Command DMA Channel */ + AHC_QUEUE_REGS = 0x00040, /* Has Queue management registers */ + AHC_SG_PRELOAD = 0x00080, /* Can perform auto-SG preload */ + AHC_SPIOCAP = 0x00100, /* Has a Serial Port I/O Cap Register */ + AHC_MULTI_TID = 0x00200, /* Has bitmask of TIDs for select-in */ + AHC_HS_MAILBOX = 0x00400, /* Has HS_MAILBOX register */ + AHC_DT = 0x00800, /* Double Transition transfers */ + AHC_NEW_TERMCTL = 0x01000, /* Newer termination scheme */ + AHC_MULTI_FUNC = 0x02000, /* Multi-Function Twin Channel Device */ + AHC_LARGE_SCBS = 0x04000, /* 64byte SCBs */ + AHC_AUTORATE = 0x08000, /* Automatic update of SCSIRATE/OFFSET*/ + AHC_AUTOPAUSE = 0x10000, /* Automatic pause on register access */ + AHC_TARGETMODE = 0x20000, /* Has tested target mode support */ + AHC_MULTIROLE = 0x40000, /* Space for two roles at a time */ + AHC_REMOVABLE = 0x80000, /* Hot-Swap supported */ + AHC_AIC7770_FE = AHC_FENONE, + /* + * The real 7850 does not support Ultra modes, but there are + * several cards that use the generic 7850 PCI ID even though + * they are using an Ultra capable chip (7859/7860). We start + * out with the AHC_ULTRA feature set and then check the DEVSTATUS + * register to determine if the capability is really present. + */ + AHC_AIC7850_FE = AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA, + AHC_AIC7860_FE = AHC_AIC7850_FE, + AHC_AIC7870_FE = AHC_TARGETMODE, + AHC_AIC7880_FE = AHC_AIC7870_FE|AHC_ULTRA, + /* + * Although we have space for both the initiator and + * target roles on ULTRA2 chips, we currently disable + * the initiator role to allow multi-scsi-id target mode + * configurations. We can only respond on the same SCSI + * ID as our initiator role if we allow initiator operation. + * At some point, we should add a configuration knob to + * allow both roles to be loaded. + */ + AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2 + |AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_MULTI_TID + |AHC_HS_MAILBOX|AHC_NEW_TERMCTL|AHC_LARGE_SCBS + |AHC_TARGETMODE, + AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_DT|AHC_AUTORATE|AHC_AUTOPAUSE, + AHC_AIC7895_FE = AHC_AIC7880_FE|AHC_MORE_SRAM|AHC_AUTOPAUSE + |AHC_CMD_CHAN|AHC_MULTI_FUNC|AHC_LARGE_SCBS, + AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID, + AHC_AIC7896_FE = AHC_AIC7890_FE|AHC_MULTI_FUNC, + AHC_AIC7899_FE = AHC_AIC7892_FE|AHC_MULTI_FUNC +} ahc_feature; + +/* + * Bugs in the silicon that we work around in software. + */ +typedef enum { + AHC_BUGNONE = 0x00, + /* + * On all chips prior to the U2 product line, + * the WIDEODD S/G segment feature does not + * work during scsi->HostBus transfers. + */ + AHC_TMODE_WIDEODD_BUG = 0x01, + /* + * On the aic7890/91 Rev 0 chips, the autoflush + * feature does not work. A manual flush of + * the DMA FIFO is required. + */ + AHC_AUTOFLUSH_BUG = 0x02, + /* + * On many chips, cacheline streaming does not work. + */ + AHC_CACHETHEN_BUG = 0x04, + /* + * On the aic7896/97 chips, cacheline + * streaming must be enabled. + */ + AHC_CACHETHEN_DIS_BUG = 0x08, + /* + * PCI 2.1 Retry failure on non-empty data fifo. + */ + AHC_PCI_2_1_RETRY_BUG = 0x10, + /* + * Controller does not handle cacheline residuals + * properly on S/G segments if PCI MWI instructions + * are allowed. + */ + AHC_PCI_MWI_BUG = 0x20, + /* + * An SCB upload using the SCB channel's + * auto array entry copy feature may + * corrupt data. This appears to only + * occur on 66MHz systems. + */ + AHC_SCBCHAN_UPLOAD_BUG = 0x40 +} ahc_bug; + +/* + * Configuration specific settings. + * The driver determines these settings by probing the + * chip/controller's configuration. + */ +typedef enum { + AHC_FNONE = 0x000, + AHC_PRIMARY_CHANNEL = 0x003, /* + * The channel that should + * be probed first. + */ + AHC_USEDEFAULTS = 0x004, /* + * For cards without an seeprom + * or a BIOS to initialize the chip's + * SRAM, we use the default target + * settings. + */ + AHC_SEQUENCER_DEBUG = 0x008, + AHC_SHARED_SRAM = 0x010, + AHC_LARGE_SEEPROM = 0x020, /* Uses C56_66 not C46 */ + AHC_RESET_BUS_A = 0x040, + AHC_RESET_BUS_B = 0x080, + AHC_EXTENDED_TRANS_A = 0x100, + AHC_EXTENDED_TRANS_B = 0x200, + AHC_TERM_ENB_A = 0x400, + AHC_TERM_ENB_B = 0x800, + AHC_INITIATORROLE = 0x1000, /* + * Allow initiator operations on + * this controller. + */ + AHC_TARGETROLE = 0x2000, /* + * Allow target operations on this + * controller. + */ + AHC_NEWEEPROM_FMT = 0x4000, + AHC_RESOURCE_SHORTAGE = 0x8000, + AHC_TQINFIFO_BLOCKED = 0x10000, /* Blocked waiting for ATIOs */ + AHC_INT50_SPEEDFLEX = 0x20000, /* + * Internal 50pin connector + * sits behind an aic3860 + */ + AHC_SCB_BTT = 0x40000, /* + * The busy targets table is + * stored in SCB space rather + * than SRAM. + */ + AHC_BIOS_ENABLED = 0x80000, + AHC_ALL_INTERRUPTS = 0x100000, + AHC_PAGESCBS = 0x400000, /* Enable SCB paging */ + AHC_EDGE_INTERRUPT = 0x800000, /* Device uses edge triggered ints */ + AHC_39BIT_ADDRESSING = 0x1000000, /* Use 39 bit addressing scheme. */ + AHC_LSCBS_ENABLED = 0x2000000, /* 64Byte SCBs enabled */ + AHC_SCB_CONFIG_USED = 0x4000000, /* No SEEPROM but SCB2 had info. */ + AHC_NO_BIOS_INIT = 0x8000000, /* No BIOS left over settings. */ + AHC_DISABLE_PCI_PERR = 0x10000000, + AHC_HAS_TERM_LOGIC = 0x20000000 +} ahc_flag; + +/************************* Hardware SCB Definition ***************************/ + +/* + * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB + * consists of a "hardware SCB" mirroring the fields available on the card + * and additional information the kernel stores for each transaction. + * + * To minimize space utilization, a portion of the hardware scb stores + * different data during different portions of a SCSI transaction. + * As initialized by the host driver for the initiator role, this area + * contains the SCSI cdb (or a pointer to the cdb) to be executed. After + * the cdb has been presented to the target, this area serves to store + * residual transfer information and the SCSI status byte. + * For the target role, the contents of this area do not change, but + * still serve a different purpose than for the initiator role. See + * struct target_data for details. + */ + +/* + * Status information embedded in the shared poriton of + * an SCB after passing the cdb to the target. The kernel + * driver will only read this data for transactions that + * complete abnormally (non-zero status byte). + */ +struct status_pkt { + uint32_t residual_datacnt; /* Residual in the current S/G seg */ + uint32_t residual_sg_ptr; /* The next S/G for this transfer */ + uint8_t scsi_status; /* Standard SCSI status byte */ +}; + +/* + * Target mode version of the shared data SCB segment. + */ +struct target_data { + uint32_t residual_datacnt; /* Residual in the current S/G seg */ + uint32_t residual_sg_ptr; /* The next S/G for this transfer */ + uint8_t scsi_status; /* SCSI status to give to initiator */ + uint8_t target_phases; /* Bitmap of phases to execute */ + uint8_t data_phase; /* Data-In or Data-Out */ + uint8_t initiator_tag; /* Initiator's transaction tag */ +}; + +struct hardware_scb { +/*0*/ union { + /* + * If the cdb is 12 bytes or less, we embed it directly + * in the SCB. For longer cdbs, we embed the address + * of the cdb payload as seen by the chip and a DMA + * is used to pull it in. + */ + uint8_t cdb[12]; + uint32_t cdb_ptr; + struct status_pkt status; + struct target_data tdata; + } shared_data; +/* + * A word about residuals. + * The scb is presented to the sequencer with the dataptr and datacnt + * fields initialized to the contents of the first S/G element to + * transfer. The sgptr field is initialized to the bus address for + * the S/G element that follows the first in the in core S/G array + * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid + * S/G entry for this transfer (single S/G element transfer with the + * first elements address and length preloaded in the dataptr/datacnt + * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL. + * The SG_FULL_RESID flag ensures that the residual will be correctly + * noted even if no data transfers occur. Once the data phase is entered, + * the residual sgptr and datacnt are loaded from the sgptr and the + * datacnt fields. After each S/G element's dataptr and length are + * loaded into the hardware, the residual sgptr is advanced. After + * each S/G element is expired, its datacnt field is checked to see + * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the + * residual sg ptr and the transfer is considered complete. If the + * sequencer determines that there is a residual in the tranfer, it + * will set the SG_RESID_VALID flag in sgptr and dma the scb back into + * host memory. To sumarize: + * + * Sequencer: + * o A residual has occurred if SG_FULL_RESID is set in sgptr, + * or residual_sgptr does not have SG_LIST_NULL set. + * + * o We are transfering the last segment if residual_datacnt has + * the SG_LAST_SEG flag set. + * + * Host: + * o A residual has occurred if a completed scb has the + * SG_RESID_VALID flag set. + * + * o residual_sgptr and sgptr refer to the "next" sg entry + * and so may point beyond the last valid sg entry for the + * transfer. + */ +/*12*/ uint32_t dataptr; +/*16*/ uint32_t datacnt; /* + * Byte 3 (numbered from 0) of + * the datacnt is really the + * 4th byte in that data address. + */ +/*20*/ uint32_t sgptr; +#define SG_PTR_MASK 0xFFFFFFF8 +/*24*/ uint8_t control; /* See SCB_CONTROL in aic7xxx.reg for details */ +/*25*/ uint8_t scsiid; /* what to load in the SCSIID register */ +/*26*/ uint8_t lun; +/*27*/ uint8_t tag; /* + * Index into our kernel SCB array. + * Also used as the tag for tagged I/O + */ +/*28*/ uint8_t cdb_len; +/*29*/ uint8_t scsirate; /* Value for SCSIRATE register */ +/*30*/ uint8_t scsioffset; /* Value for SCSIOFFSET register */ +/*31*/ uint8_t next; /* + * Used for threading SCBs in the + * "Waiting for Selection" and + * "Disconnected SCB" lists down + * in the sequencer. + */ +/*32*/ uint8_t cdb32[32]; /* + * CDB storage for cdbs of size + * 13->32. We store them here + * because hardware scbs are + * allocated from DMA safe + * memory so we are guaranteed + * the controller can access + * this data. + */ +}; + +/************************ Kernel SCB Definitions ******************************/ +/* + * Some fields of the SCB are OS dependent. Here we collect the + * definitions for elements that all OS platforms need to include + * in there SCB definition. + */ + +/* + * Definition of a scatter/gather element as transfered to the controller. + * The aic7xxx chips only support a 24bit length. We use the top byte of + * the length to store additional address bits and a flag to indicate + * that a given segment terminates the transfer. This gives us an + * addressable range of 512GB on machines with 64bit PCI or with chips + * that can support dual address cycles on 32bit PCI busses. + */ +struct ahc_dma_seg { + uint32_t addr; + uint32_t len; +#define AHC_DMA_LAST_SEG 0x80000000 +#define AHC_SG_HIGH_ADDR_MASK 0x7F000000 +#define AHC_SG_LEN_MASK 0x00FFFFFF +}; + +struct sg_map_node { + bus_dmamap_t sg_dmamap; + dma_addr_t sg_physaddr; + struct ahc_dma_seg* sg_vaddr; + SLIST_ENTRY(sg_map_node) links; +}; + +/* + * The current state of this SCB. + */ +typedef enum { + SCB_FREE = 0x0000, + SCB_OTHERTCL_TIMEOUT = 0x0002,/* + * Another device was active + * during the first timeout for + * this SCB so we gave ourselves + * an additional timeout period + * in case it was hogging the + * bus. + */ + SCB_DEVICE_RESET = 0x0004, + SCB_SENSE = 0x0008, + SCB_CDB32_PTR = 0x0010, + SCB_RECOVERY_SCB = 0x0020, + SCB_AUTO_NEGOTIATE = 0x0040,/* Negotiate to achieve goal. */ + SCB_NEGOTIATE = 0x0080,/* Negotiation forced for command. */ + SCB_ABORT = 0x0100, + SCB_UNTAGGEDQ = 0x0200, + SCB_ACTIVE = 0x0400, + SCB_TARGET_IMMEDIATE = 0x0800, + SCB_TRANSMISSION_ERROR = 0x1000,/* + * We detected a parity or CRC + * error that has effected the + * payload of the command. This + * flag is checked when normal + * status is returned to catch + * the case of a target not + * responding to our attempt + * to report the error. + */ + SCB_TARGET_SCB = 0x2000, + SCB_SILENT = 0x4000 /* + * Be quiet about transmission type + * errors. They are expected and we + * don't want to upset the user. This + * flag is typically used during DV. + */ +} scb_flag; + +struct scb { + struct hardware_scb *hscb; + union { + SLIST_ENTRY(scb) sle; + TAILQ_ENTRY(scb) tqe; + } links; + LIST_ENTRY(scb) pending_links; + ahc_io_ctx_t io_ctx; + struct ahc_softc *ahc_softc; + scb_flag flags; +#ifndef __linux__ + bus_dmamap_t dmamap; +#endif + struct scb_platform_data *platform_data; + struct sg_map_node *sg_map; + struct ahc_dma_seg *sg_list; + dma_addr_t sg_list_phys; + u_int sg_count;/* How full ahc_dma_seg is */ +}; + +struct scb_data { + SLIST_HEAD(, scb) free_scbs; /* + * Pool of SCBs ready to be assigned + * commands to execute. + */ + struct scb *scbindex[256]; /* + * Mapping from tag to SCB. + * As tag identifiers are an + * 8bit value, we provide space + * for all possible tag values. + * Any lookups to entries at or + * above AHC_SCB_MAX_ALLOC will + * always fail. + */ + struct hardware_scb *hscbs; /* Array of hardware SCBs */ + struct scb *scbarray; /* Array of kernel SCBs */ + struct scsi_sense_data *sense; /* Per SCB sense data */ + + /* + * "Bus" addresses of our data structures. + */ + bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */ + bus_dmamap_t hscb_dmamap; + dma_addr_t hscb_busaddr; + bus_dma_tag_t sense_dmat; + bus_dmamap_t sense_dmamap; + dma_addr_t sense_busaddr; + bus_dma_tag_t sg_dmat; /* dmat for our sg segments */ + SLIST_HEAD(, sg_map_node) sg_maps; + uint8_t numscbs; + uint8_t maxhscbs; /* Number of SCBs on the card */ + uint8_t init_level; /* + * How far we've initialized + * this structure. + */ +}; + +/************************ Target Mode Definitions *****************************/ + +/* + * Connection desciptor for select-in requests in target mode. + */ +struct target_cmd { + uint8_t scsiid; /* Our ID and the initiator's ID */ + uint8_t identify; /* Identify message */ + uint8_t bytes[22]; /* + * Bytes contains any additional message + * bytes terminated by 0xFF. The remainder + * is the cdb to execute. + */ + uint8_t cmd_valid; /* + * When a command is complete, the firmware + * will set cmd_valid to all bits set. + * After the host has seen the command, + * the bits are cleared. This allows us + * to just peek at host memory to determine + * if more work is complete. cmd_valid is on + * an 8 byte boundary to simplify setting + * it on aic7880 hardware which only has + * limited direct access to the DMA FIFO. + */ + uint8_t pad[7]; +}; + +/* + * Number of events we can buffer up if we run out + * of immediate notify ccbs. + */ +#define AHC_TMODE_EVENT_BUFFER_SIZE 8 +struct ahc_tmode_event { + uint8_t initiator_id; + uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */ +#define EVENT_TYPE_BUS_RESET 0xFF + uint8_t event_arg; +}; + +/* + * Per enabled lun target mode state. + * As this state is directly influenced by the host OS'es target mode + * environment, we let the OS module define it. Forward declare the + * structure here so we can store arrays of them, etc. in OS neutral + * data structures. + */ +#ifdef AHC_TARGET_MODE +struct ahc_tmode_lstate { + struct cam_path *path; + struct ccb_hdr_slist accept_tios; + struct ccb_hdr_slist immed_notifies; + struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE]; + uint8_t event_r_idx; + uint8_t event_w_idx; +}; +#else +struct ahc_tmode_lstate; +#endif + +/******************** Transfer Negotiation Datastructures *********************/ +#define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */ +#define AHC_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */ +#define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */ +#define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */ + +#define AHC_WIDTH_UNKNOWN 0xFF +#define AHC_PERIOD_UNKNOWN 0xFF +#define AHC_OFFSET_UNKNOWN 0xFF +#define AHC_PPR_OPTS_UNKNOWN 0xFF + +/* + * Transfer Negotiation Information. + */ +struct ahc_transinfo { + uint8_t protocol_version; /* SCSI Revision level */ + uint8_t transport_version; /* SPI Revision level */ + uint8_t width; /* Bus width */ + uint8_t period; /* Sync rate factor */ + uint8_t offset; /* Sync offset */ + uint8_t ppr_options; /* Parallel Protocol Request options */ +}; + +/* + * Per-initiator current, goal and user transfer negotiation information. */ +struct ahc_initiator_tinfo { + uint8_t scsirate; /* Computed value for SCSIRATE reg */ + struct ahc_transinfo curr; + struct ahc_transinfo goal; + struct ahc_transinfo user; +}; + +/* + * Per enabled target ID state. + * Pointers to lun target state as well as sync/wide negotiation information + * for each initiator<->target mapping. For the initiator role we pretend + * that we are the target and the targets are the initiators since the + * negotiation is the same regardless of role. + */ +struct ahc_tmode_tstate { + struct ahc_tmode_lstate* enabled_luns[AHC_NUM_LUNS]; + struct ahc_initiator_tinfo transinfo[AHC_NUM_TARGETS]; + + /* + * Per initiator state bitmasks. + */ + uint16_t auto_negotiate;/* Auto Negotiation Required */ + uint16_t ultraenb; /* Using ultra sync rate */ + uint16_t discenable; /* Disconnection allowed */ + uint16_t tagenable; /* Tagged Queuing allowed */ +}; + +/* + * Data structure for our table of allowed synchronous transfer rates. + */ +struct ahc_syncrate { + u_int sxfr_u2; /* Value of the SXFR parameter for Ultra2+ Chips */ + u_int sxfr; /* Value of the SXFR parameter for <= Ultra Chips */ +#define ULTRA_SXFR 0x100 /* Rate Requires Ultra Mode set */ +#define ST_SXFR 0x010 /* Rate Single Transition Only */ +#define DT_SXFR 0x040 /* Rate Double Transition Only */ + uint8_t period; /* Period to send to SCSI target */ + char *rate; +}; + +/* Safe and valid period for async negotiations. */ +#define AHC_ASYNC_XFER_PERIOD 0x45 +#define AHC_ULTRA2_XFER_PERIOD 0x0a + +/* + * Indexes into our table of syncronous transfer rates. + */ +#define AHC_SYNCRATE_DT 0 +#define AHC_SYNCRATE_ULTRA2 1 +#define AHC_SYNCRATE_ULTRA 3 +#define AHC_SYNCRATE_FAST 6 +#define AHC_SYNCRATE_MAX AHC_SYNCRATE_DT +#define AHC_SYNCRATE_MIN 13 + +/***************************** Lookup Tables **********************************/ +/* + * Phase -> name and message out response + * to parity errors in each phase table. + */ +struct ahc_phase_table_entry { + uint8_t phase; + uint8_t mesg_out; /* Message response to parity errors */ + char *phasemsg; +}; + +/************************** Serial EEPROM Format ******************************/ + +struct seeprom_config { +/* + * Per SCSI ID Configuration Flags + */ + uint16_t device_flags[16]; /* words 0-15 */ +#define CFXFER 0x0007 /* synchronous transfer rate */ +#define CFSYNCH 0x0008 /* enable synchronous transfer */ +#define CFDISC 0x0010 /* enable disconnection */ +#define CFWIDEB 0x0020 /* wide bus device */ +#define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/ +#define CFSYNCSINGLE 0x0080 /* Single-Transition signalling */ +#define CFSTART 0x0100 /* send start unit SCSI command */ +#define CFINCBIOS 0x0200 /* include in BIOS scan */ +#define CFRNFOUND 0x0400 /* report even if not found */ +#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */ +#define CFWBCACHEENB 0x4000 /* Enable W-Behind Cache on disks */ +#define CFWBCACHENOP 0xc000 /* Don't touch W-Behind Cache */ + +/* + * BIOS Control Bits + */ + uint16_t bios_control; /* word 16 */ +#define CFSUPREM 0x0001 /* support all removeable drives */ +#define CFSUPREMB 0x0002 /* support removeable boot drives */ +#define CFBIOSEN 0x0004 /* BIOS enabled */ +#define CFBIOS_BUSSCAN 0x0008 /* Have the BIOS Scan the Bus */ +#define CFSM2DRV 0x0010 /* support more than two drives */ +#define CFSTPWLEVEL 0x0010 /* Termination level control */ +#define CF284XEXTEND 0x0020 /* extended translation (284x cards) */ +#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */ +#define CFTERM_MENU 0x0040 /* BIOS displays termination menu */ +#define CFEXTEND 0x0080 /* extended translation enabled */ +#define CFSCAMEN 0x0100 /* SCAM enable */ +#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */ +#define CFMSG_VERBOSE 0x0000 +#define CFMSG_SILENT 0x0200 +#define CFMSG_DIAG 0x0400 +#define CFBOOTCD 0x0800 /* Support Bootable CD-ROM */ +/* UNUSED 0xff00 */ + +/* + * Host Adapter Control Bits + */ + uint16_t adapter_control; /* word 17 */ +#define CFAUTOTERM 0x0001 /* Perform Auto termination */ +#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */ +#define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */ +#define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */ +#define CFSTERM 0x0004 /* SCSI low byte termination */ +#define CFWSTERM 0x0008 /* SCSI high byte termination */ +#define CFSPARITY 0x0010 /* SCSI parity */ +#define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */ +#define CFMULTILUN 0x0020 +#define CFRESETB 0x0040 /* reset SCSI bus at boot */ +#define CFCLUSTERENB 0x0080 /* Cluster Enable */ +#define CFBOOTCHAN 0x0300 /* probe this channel first */ +#define CFBOOTCHANSHIFT 8 +#define CFSEAUTOTERM 0x0400 /* Ultra2 Perform secondary Auto Term*/ +#define CFSELOWTERM 0x0800 /* Ultra2 secondary low term */ +#define CFSEHIGHTERM 0x1000 /* Ultra2 secondary high term */ +#define CFENABLEDV 0x4000 /* Perform Domain Validation*/ + +/* + * Bus Release Time, Host Adapter ID + */ + uint16_t brtime_id; /* word 18 */ +#define CFSCSIID 0x000f /* host adapter SCSI ID */ +/* UNUSED 0x00f0 */ +#define CFBRTIME 0xff00 /* bus release time */ + +/* + * Maximum targets + */ + uint16_t max_targets; /* word 19 */ +#define CFMAXTARG 0x00ff /* maximum targets */ +#define CFBOOTLUN 0x0f00 /* Lun to boot from */ +#define CFBOOTID 0xf000 /* Target to boot from */ + uint16_t res_1[10]; /* words 20-29 */ + uint16_t signature; /* Signature == 0x250 */ +#define CFSIGNATURE 0x250 +#define CFSIGNATURE2 0x300 + uint16_t checksum; /* word 31 */ +}; + +/**************************** Message Buffer *********************************/ +typedef enum { + MSG_TYPE_NONE = 0x00, + MSG_TYPE_INITIATOR_MSGOUT = 0x01, + MSG_TYPE_INITIATOR_MSGIN = 0x02, + MSG_TYPE_TARGET_MSGOUT = 0x03, + MSG_TYPE_TARGET_MSGIN = 0x04 +} ahc_msg_type; + +typedef enum { + MSGLOOP_IN_PROG, + MSGLOOP_MSGCOMPLETE, + MSGLOOP_TERMINATED +} msg_loop_stat; + +/*********************** Software Configuration Structure *********************/ +TAILQ_HEAD(scb_tailq, scb); + +struct ahc_aic7770_softc { + /* + * Saved register state used for chip_init(). + */ + uint8_t busspd; + uint8_t bustime; +}; + +struct ahc_pci_softc { + /* + * Saved register state used for chip_init(). + */ + uint32_t devconfig; + uint16_t targcrccnt; + uint8_t command; + uint8_t csize_lattime; + uint8_t optionmode; + uint8_t crccontrol1; + uint8_t dscommand0; + uint8_t dspcistatus; + uint8_t scbbaddr; + uint8_t dff_thrsh; +}; + +union ahc_bus_softc { + struct ahc_aic7770_softc aic7770_softc; + struct ahc_pci_softc pci_softc; +}; + +typedef void (*ahc_bus_intr_t)(struct ahc_softc *); +typedef int (*ahc_bus_chip_init_t)(struct ahc_softc *); +typedef int (*ahc_bus_suspend_t)(struct ahc_softc *); +typedef int (*ahc_bus_resume_t)(struct ahc_softc *); +typedef void ahc_callback_t (void *); + +struct ahc_softc { + bus_space_tag_t tag; + bus_space_handle_t bsh; +#ifndef __linux__ + bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */ +#endif + struct scb_data *scb_data; + + struct scb *next_queued_scb; + + /* + * SCBs that have been sent to the controller + */ + LIST_HEAD(, scb) pending_scbs; + + /* + * Counting lock for deferring the release of additional + * untagged transactions from the untagged_queues. When + * the lock is decremented to 0, all queues in the + * untagged_queues array are run. + */ + u_int untagged_queue_lock; + + /* + * Per-target queue of untagged-transactions. The + * transaction at the head of the queue is the + * currently pending untagged transaction for the + * target. The driver only allows a single untagged + * transaction per target. + */ + struct scb_tailq untagged_queues[AHC_NUM_TARGETS]; + + /* + * Bus attachment specific data. + */ + union ahc_bus_softc bus_softc; + + /* + * Platform specific data. + */ + struct ahc_platform_data *platform_data; + + /* + * Platform specific device information. + */ + ahc_dev_softc_t dev_softc; + + /* + * Bus specific device information. + */ + ahc_bus_intr_t bus_intr; + + /* + * Bus specific initialization required + * after a chip reset. + */ + ahc_bus_chip_init_t bus_chip_init; + + /* + * Bus specific suspend routine. + */ + ahc_bus_suspend_t bus_suspend; + + /* + * Bus specific resume routine. + */ + ahc_bus_resume_t bus_resume; + + /* + * Target mode related state kept on a per enabled lun basis. + * Targets that are not enabled will have null entries. + * As an initiator, we keep one target entry for our initiator + * ID to store our sync/wide transfer settings. + */ + struct ahc_tmode_tstate *enabled_targets[AHC_NUM_TARGETS]; + + /* + * The black hole device responsible for handling requests for + * disabled luns on enabled targets. + */ + struct ahc_tmode_lstate *black_hole; + + /* + * Device instance currently on the bus awaiting a continue TIO + * for a command that was not given the disconnect priveledge. + */ + struct ahc_tmode_lstate *pending_device; + + /* + * Card characteristics + */ + ahc_chip chip; + ahc_feature features; + ahc_bug bugs; + ahc_flag flags; + struct seeprom_config *seep_config; + + /* Values to store in the SEQCTL register for pause and unpause */ + uint8_t unpause; + uint8_t pause; + + /* Command Queues */ + uint8_t qoutfifonext; + uint8_t qinfifonext; + uint8_t *qoutfifo; + uint8_t *qinfifo; + + /* Critical Section Data */ + struct cs *critical_sections; + u_int num_critical_sections; + + /* Links for chaining softcs */ + TAILQ_ENTRY(ahc_softc) links; + + /* Channel Names ('A', 'B', etc.) */ + char channel; + char channel_b; + + /* Initiator Bus ID */ + uint8_t our_id; + uint8_t our_id_b; + + /* + * PCI error detection. + */ + int unsolicited_ints; + + /* + * Target incoming command FIFO. + */ + struct target_cmd *targetcmds; + uint8_t tqinfifonext; + + /* + * Cached copy of the sequencer control register. + */ + uint8_t seqctl; + + /* + * Incoming and outgoing message handling. + */ + uint8_t send_msg_perror; + ahc_msg_type msg_type; + uint8_t msgout_buf[12];/* Message we are sending */ + uint8_t msgin_buf[12];/* Message we are receiving */ + u_int msgout_len; /* Length of message to send */ + u_int msgout_index; /* Current index in msgout */ + u_int msgin_index; /* Current index in msgin */ + + /* + * Mapping information for data structures shared + * between the sequencer and kernel. + */ + bus_dma_tag_t parent_dmat; + bus_dma_tag_t shared_data_dmat; + bus_dmamap_t shared_data_dmamap; + dma_addr_t shared_data_busaddr; + + /* + * Bus address of the one byte buffer used to + * work-around a DMA bug for chips <= aic7880 + * in target mode. + */ + dma_addr_t dma_bug_buf; + + /* Number of enabled target mode device on this card */ + u_int enabled_luns; + + /* Initialization level of this data structure */ + u_int init_level; + + /* PCI cacheline size. */ + u_int pci_cachesize; + + /* + * Count of parity errors we have seen as a target. + * We auto-disable parity error checking after seeing + * AHC_PCI_TARGET_PERR_THRESH number of errors. + */ + u_int pci_target_perr_count; +#define AHC_PCI_TARGET_PERR_THRESH 10 + + /* Maximum number of sequencer instructions supported. */ + u_int instruction_ram_size; + + /* Per-Unit descriptive information */ + const char *description; + char *name; + int unit; + + /* Selection Timer settings */ + int seltime; + int seltime_b; + + uint16_t user_discenable;/* Disconnection allowed */ + uint16_t user_tagenable;/* Tagged Queuing allowed */ +}; + +TAILQ_HEAD(ahc_softc_tailq, ahc_softc); +extern struct ahc_softc_tailq ahc_tailq; + +/************************ Active Device Information ***************************/ +typedef enum { + ROLE_UNKNOWN, + ROLE_INITIATOR, + ROLE_TARGET +} role_t; + +struct ahc_devinfo { + int our_scsiid; + int target_offset; + uint16_t target_mask; + u_int target; + u_int lun; + char channel; + role_t role; /* + * Only guaranteed to be correct if not + * in the busfree state. + */ +}; + +/****************************** PCI Structures ********************************/ +typedef int (ahc_device_setup_t)(struct ahc_softc *); + +struct ahc_pci_identity { + uint64_t full_id; + uint64_t id_mask; + char *name; + ahc_device_setup_t *setup; +}; +extern struct ahc_pci_identity ahc_pci_ident_table[]; +extern const u_int ahc_num_pci_devs; + +/***************************** VL/EISA Declarations ***************************/ +struct aic7770_identity { + uint32_t full_id; + uint32_t id_mask; + const char *name; + ahc_device_setup_t *setup; +}; +extern struct aic7770_identity aic7770_ident_table[]; +extern const int ahc_num_aic7770_devs; + +#define AHC_EISA_SLOT_OFFSET 0xc00 +#define AHC_EISA_IOSIZE 0x100 + +/*************************** Function Declarations ****************************/ +/******************************************************************************/ +u_int ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl); +void ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl); +void ahc_busy_tcl(struct ahc_softc *ahc, + u_int tcl, u_int busyid); + +/***************************** PCI Front End *********************************/ +struct ahc_pci_identity *ahc_find_pci_device(ahc_dev_softc_t); +int ahc_pci_config(struct ahc_softc *, + struct ahc_pci_identity *); +int ahc_pci_test_register_access(struct ahc_softc *); + +/*************************** EISA/VL Front End ********************************/ +struct aic7770_identity *aic7770_find_device(uint32_t); +int aic7770_config(struct ahc_softc *ahc, + struct aic7770_identity *, + u_int port); + +/************************** SCB and SCB queue management **********************/ +int ahc_probe_scbs(struct ahc_softc *); +void ahc_run_untagged_queues(struct ahc_softc *ahc); +void ahc_run_untagged_queue(struct ahc_softc *ahc, + struct scb_tailq *queue); +void ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, + struct scb *scb); +int ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, + int target, char channel, int lun, + u_int tag, role_t role); + +/****************************** Initialization ********************************/ +struct ahc_softc *ahc_alloc(void *platform_arg, char *name); +int ahc_softc_init(struct ahc_softc *); +void ahc_controller_info(struct ahc_softc *ahc, char *buf); +int ahc_chip_init(struct ahc_softc *ahc); +int ahc_init(struct ahc_softc *ahc); +void ahc_intr_enable(struct ahc_softc *ahc, int enable); +void ahc_pause_and_flushwork(struct ahc_softc *ahc); +int ahc_suspend(struct ahc_softc *ahc); +int ahc_resume(struct ahc_softc *ahc); +void ahc_softc_insert(struct ahc_softc *); +struct ahc_softc *ahc_find_softc(struct ahc_softc *ahc); +void ahc_set_unit(struct ahc_softc *, int); +void ahc_set_name(struct ahc_softc *, char *); +void ahc_alloc_scbs(struct ahc_softc *ahc); +void ahc_free(struct ahc_softc *ahc); +int ahc_reset(struct ahc_softc *ahc, int reinit); +void ahc_shutdown(void *arg); + +/*************************** Interrupt Services *******************************/ +void ahc_clear_intstat(struct ahc_softc *ahc); +void ahc_run_qoutfifo(struct ahc_softc *ahc); +#ifdef AHC_TARGET_MODE +void ahc_run_tqinfifo(struct ahc_softc *ahc, int paused); +#endif +void ahc_handle_brkadrint(struct ahc_softc *ahc); +void ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat); +void ahc_handle_scsiint(struct ahc_softc *ahc, + u_int intstat); +void ahc_clear_critical_section(struct ahc_softc *ahc); + +/***************************** Error Recovery *********************************/ +typedef enum { + SEARCH_COMPLETE, + SEARCH_COUNT, + SEARCH_REMOVE +} ahc_search_action; +int ahc_search_qinfifo(struct ahc_softc *ahc, int target, + char channel, int lun, u_int tag, + role_t role, uint32_t status, + ahc_search_action action); +int ahc_search_untagged_queues(struct ahc_softc *ahc, + ahc_io_ctx_t ctx, + int target, char channel, + int lun, uint32_t status, + ahc_search_action action); +int ahc_search_disc_list(struct ahc_softc *ahc, int target, + char channel, int lun, u_int tag, + int stop_on_first, int remove, + int save_state); +void ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb); +int ahc_reset_channel(struct ahc_softc *ahc, char channel, + int initiate_reset); +int ahc_abort_scbs(struct ahc_softc *ahc, int target, + char channel, int lun, u_int tag, + role_t role, uint32_t status); +void ahc_restart(struct ahc_softc *ahc); +void ahc_calc_residual(struct ahc_softc *ahc, + struct scb *scb); +/*************************** Utility Functions ********************************/ +struct ahc_phase_table_entry* + ahc_lookup_phase_entry(int phase); +void ahc_compile_devinfo(struct ahc_devinfo *devinfo, + u_int our_id, u_int target, + u_int lun, char channel, + role_t role); +/************************** Transfer Negotiation ******************************/ +struct ahc_syncrate* ahc_find_syncrate(struct ahc_softc *ahc, u_int *period, + u_int *ppr_options, u_int maxsync); +u_int ahc_find_period(struct ahc_softc *ahc, + u_int scsirate, u_int maxsync); +void ahc_validate_offset(struct ahc_softc *ahc, + struct ahc_initiator_tinfo *tinfo, + struct ahc_syncrate *syncrate, + u_int *offset, int wide, + role_t role); +void ahc_validate_width(struct ahc_softc *ahc, + struct ahc_initiator_tinfo *tinfo, + u_int *bus_width, + role_t role); +/* + * Negotiation types. These are used to qualify if we should renegotiate + * even if our goal and current transport parameters are identical. + */ +typedef enum { + AHC_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */ + AHC_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */ + AHC_NEG_ALWAYS /* Renegotiat even if goal is async. */ +} ahc_neg_type; +int ahc_update_neg_request(struct ahc_softc*, + struct ahc_devinfo*, + struct ahc_tmode_tstate*, + struct ahc_initiator_tinfo*, + ahc_neg_type); +void ahc_set_width(struct ahc_softc *ahc, + struct ahc_devinfo *devinfo, + u_int width, u_int type, int paused); +void ahc_set_syncrate(struct ahc_softc *ahc, + struct ahc_devinfo *devinfo, + struct ahc_syncrate *syncrate, + u_int period, u_int offset, + u_int ppr_options, + u_int type, int paused); +typedef enum { + AHC_QUEUE_NONE, + AHC_QUEUE_BASIC, + AHC_QUEUE_TAGGED +} ahc_queue_alg; + +void ahc_set_tags(struct ahc_softc *ahc, + struct ahc_devinfo *devinfo, + ahc_queue_alg alg); + +/**************************** Target Mode *************************************/ +#ifdef AHC_TARGET_MODE +void ahc_send_lstate_events(struct ahc_softc *, + struct ahc_tmode_lstate *); +void ahc_handle_en_lun(struct ahc_softc *ahc, + struct cam_sim *sim, union ccb *ccb); +cam_status ahc_find_tmode_devs(struct ahc_softc *ahc, + struct cam_sim *sim, union ccb *ccb, + struct ahc_tmode_tstate **tstate, + struct ahc_tmode_lstate **lstate, + int notfound_failure); +#ifndef AHC_TMODE_ENABLE +#define AHC_TMODE_ENABLE 0 +#endif +#endif +/******************************* Debug ***************************************/ +#ifdef AHC_DEBUG +extern uint32_t ahc_debug; +#define AHC_SHOW_MISC 0x0001 +#define AHC_SHOW_SENSE 0x0002 +#define AHC_DUMP_SEEPROM 0x0004 +#define AHC_SHOW_TERMCTL 0x0008 +#define AHC_SHOW_MEMORY 0x0010 +#define AHC_SHOW_MESSAGES 0x0020 +#define AHC_SHOW_DV 0x0040 +#define AHC_SHOW_SELTO 0x0080 +#define AHC_SHOW_QFULL 0x0200 +#define AHC_SHOW_QUEUE 0x0400 +#define AHC_SHOW_TQIN 0x0800 +#define AHC_SHOW_MASKED_ERRORS 0x1000 +#define AHC_DEBUG_SEQUENCER 0x2000 +#endif +void ahc_print_scb(struct scb *scb); +void ahc_print_devinfo(struct ahc_softc *ahc, + struct ahc_devinfo *dev); +void ahc_dump_card_state(struct ahc_softc *ahc); +int ahc_print_register(ahc_reg_parse_entry_t *table, + u_int num_entries, + const char *name, + u_int address, + u_int value, + u_int *cur_column, + u_int wrap_point); +/******************************* SEEPROM *************************************/ +int ahc_acquire_seeprom(struct ahc_softc *ahc, + struct seeprom_descriptor *sd); +void ahc_release_seeprom(struct seeprom_descriptor *sd); +#endif /* _AIC7XXX_H_ */ |