diff options
author | Hannes Reinecke <hare@suse.de> | 2006-01-12 12:08:06 +0100 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2006-01-12 12:03:50 -0600 |
commit | 11668bb673c41ec169a85d0b52c538a1c11d29e1 (patch) | |
tree | 423c30e22eea305d5c059c6463bdd226c1734bf4 /drivers/scsi/aic7xxx/aic79xx_osm.c | |
parent | ba62cd2d01e401faa5d5a25fa8e990d0b1a1996a (diff) | |
download | op-kernel-dev-11668bb673c41ec169a85d0b52c538a1c11d29e1.zip op-kernel-dev-11668bb673c41ec169a85d0b52c538a1c11d29e1.tar.gz |
[SCSI] aic79xx: Sequencer update
Update sequencer code to Adaptec version 2.0.12-6.3.9.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/aic7xxx/aic79xx_osm.c')
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_osm.c | 62 |
1 files changed, 51 insertions, 11 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 1c8f872..2567e29 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1468,6 +1468,30 @@ ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev, if ((tstate->auto_negotiate & mask) != 0) { scb->flags |= SCB_AUTO_NEGOTIATE; scb->hscb->control |= MK_MESSAGE; + } else if (cmd->cmnd[0] == INQUIRY + && (tinfo->curr.offset != 0 + || tinfo->curr.width != MSG_EXT_WDTR_BUS_8_BIT + || tinfo->curr.ppr_options != 0) + && (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)==0) { + /* + * The SCSI spec requires inquiry + * commands to complete without + * reporting unit attention conditions. + * Because of this, an inquiry command + * that occurs just after a device is + * reset will result in a data phase + * with mismatched negotiated rates. + * The core already forces a renegotiation + * for reset events that are visible to + * our controller or that we initiate, + * but a third party device reset or a + * hot-plug insertion can still cause this + * issue. Therefore, we force a re-negotiation + * for every inquiry command unless we + * are async. + */ + scb->flags |= SCB_NEGOTIATE; + scb->hscb->control |= MK_MESSAGE; } if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) { @@ -2058,6 +2082,7 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) int paused; int wait; int disconnected; + int found; ahd_mode_state saved_modes; unsigned long flags; @@ -2176,7 +2201,8 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) last_phase = ahd_inb(ahd, LASTPHASE); saved_scbptr = ahd_get_scbptr(ahd); active_scbptr = saved_scbptr; - if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) { + if (disconnected && ((last_phase != P_BUSFREE) || + (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0)) { struct scb *bus_scb; bus_scb = ahd_lookup_scb(ahd, active_scbptr); @@ -2194,28 +2220,41 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) * bus or is in the disconnected state. */ saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); - if (last_phase != P_BUSFREE - && (SCB_GET_TAG(pending_scb) == active_scbptr + if (SCB_GET_TAG(pending_scb) == active_scbptr || (flag == SCB_DEVICE_RESET - && SCSIID_TARGET(ahd, saved_scsiid) == scmd_id(cmd)))) { + && SCSIID_TARGET(ahd, saved_scsiid) == scmd_id(cmd))) { /* * We're active on the bus, so assert ATN * and hope that the target responds. */ pending_scb = ahd_lookup_scb(ahd, active_scbptr); - pending_scb->flags |= SCB_RECOVERY_SCB|flag; + pending_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET; ahd_outb(ahd, MSG_OUT, HOST_MSG); ahd_outb(ahd, SCSISIGO, last_phase|ATNO); - scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n"); + scmd_printk(KERN_INFO, cmd, "BDR message in message buffer\n"); wait = TRUE; + } else if (last_phase != P_BUSFREE + && ahd_inb(ahd, SCSIPHASE) == 0) { + /* + * SCB is not identified, there + * is no pending REQ, and the sequencer + * has not seen a busfree. Looks like + * a stuck connection waiting to + * go busfree. Reset the bus. + */ + found = ahd_reset_channel(ahd, cmd->device->channel + 'A', + /*Initiate Reset*/TRUE); + printf("%s: Issued Channel %c Bus Reset. " + "%d SCBs aborted\n", ahd_name(ahd), + cmd->device->channel + 'A', found); } else if (disconnected) { /* * Actually re-queue this SCB in an attempt * to select the device before it reconnects. */ - pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT; + pending_scb->flags |= SCB_RECOVERY_SCB|flag; ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb)); pending_scb->hscb->cdb_len = 0; pending_scb->hscb->task_attribute = 0; @@ -2296,16 +2335,17 @@ done: timer.expires = jiffies + (5 * HZ); timer.function = ahd_linux_sem_timeout; add_timer(&timer); - printf("Recovery code sleeping\n"); + printf("%s: Recovery code sleeping\n", ahd_name(ahd)); down(&ahd->platform_data->eh_sem); - printf("Recovery code awake\n"); + printf("%s: Recovery code awake\n", ahd_name(ahd)); ret = del_timer_sync(&timer); if (ret == 0) { - printf("Timer Expired\n"); + printf("%s: Timer Expired (active %d)\n", + ahd_name(ahd), dev->active); retval = FAILED; } } - ahd_unlock(ahd, &flags); + ahd_unlock(ahd, &flags); return (retval); } |