diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aacraid/linit.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/aacraid/linit.c')
-rw-r--r-- | drivers/scsi/aacraid/linit.c | 749 |
1 files changed, 749 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c new file mode 100644 index 0000000..c9b8268 --- /dev/null +++ b/drivers/scsi/aacraid/linit.c @@ -0,0 +1,749 @@ +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com> + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Module Name: + * linit.c + * + * Abstract: Linux Driver entry module for Adaptec RAID Array Controller + */ + +#define AAC_DRIVER_VERSION "1.1.2-lk2" +#define AAC_DRIVER_BUILD_DATE __DATE__ +#define AAC_DRIVERNAME "aacraid" + +#include <linux/compat.h> +#include <linux/blkdev.h> +#include <linux/completion.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/syscalls.h> +#include <linux/ioctl32.h> +#include <linux/delay.h> +#include <linux/smp_lock.h> +#include <asm/semaphore.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsicam.h> +#include <scsi/scsi_eh.h> + +#include "aacraid.h" + + +MODULE_AUTHOR("Red Hat Inc and Adaptec"); +MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, " + "Adaptec Advanced Raid Products, " + "and HP NetRAID-4M SCSI driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(AAC_DRIVER_VERSION); + +static LIST_HEAD(aac_devices); +static int aac_cfg_major = -1; + +/* + * Because of the way Linux names scsi devices, the order in this table has + * become important. Check for on-board Raid first, add-in cards second. + * + * Note: The last field is used to index into aac_drivers below. + */ +static struct pci_device_id aac_pci_tbl[] = { + { 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */ + { 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */ + { 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */ + { 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ + { 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */ + { 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */ + { 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ + { 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */ + { 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */ + { 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */ + { 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */ + { 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */ + { 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */ + { 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */ + { 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */ + { 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */ + + { 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */ + { 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */ + { 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */ + { 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */ + { 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */ + { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */ + { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */ + { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */ + { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */ + { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */ + { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */ + { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */ + { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */ + { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */ + { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */ + { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */ + { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */ + { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */ + { 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */ + + { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/ + { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/ + { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/ + { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */ + { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */ + + { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */ + { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */ + { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */ + { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */ + { 0,} +}; +MODULE_DEVICE_TABLE(pci, aac_pci_tbl); + +/* + * dmb - For now we add the number of channels to this structure. + * In the future we should add a fib that reports the number of channels + * for the card. At that time we can remove the channels from here + */ +static struct aac_driver_ident aac_drivers[] = { + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 2/Si (Iguana/PERC2Si) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Opal/PERC3Di) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Si (SlimFast/PERC3Si */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Viper/PERC3DiV) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Lexus/PERC3DiL) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Dagger/PERC3DiD) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Boxster/PERC3DiB) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* catapult */ + { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* tomcat */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan-2m) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S220 (Legend Crusader) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S230 (Legend Vulcan) */ + + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020ZCR ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025ZCR ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2410SA SATA ", 1 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */ + { aac_rx_init, "aacraid", "DELL ", "CERC SR2 ", 1 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2810SA SATA ", 1 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-21610SA SATA", 1 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005SAS ", 1 }, /* ASR-4005SAS */ + { aac_rx_init, "aacraid", "IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000SAS ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */ + + { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/ + { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/ + { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/ + { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell PERC2/QC */ + { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */ + + { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */ + { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */ + { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec Rocket Catch All */ +}; + +/** + * aac_queuecommand - queue a SCSI command + * @cmd: SCSI command to queue + * @done: Function to call on command completion + * + * Queues a command for execution by the associated Host Adapter. + * + * TODO: unify with aac_scsi_cmd(). + */ + +static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) +{ + cmd->scsi_done = done; + return (aac_scsi_cmd(cmd) ? FAILED : 0); +} + +/** + * aac_info - Returns the host adapter name + * @shost: Scsi host to report on + * + * Returns a static string describing the device in question + */ + +const char *aac_info(struct Scsi_Host *shost) +{ + struct aac_dev *dev = (struct aac_dev *)shost->hostdata; + return aac_drivers[dev->cardtype].name; +} + +/** + * aac_get_driver_ident + * @devtype: index into lookup table + * + * Returns a pointer to the entry in the driver lookup table. + */ + +struct aac_driver_ident* aac_get_driver_ident(int devtype) +{ + return &aac_drivers[devtype]; +} + +/** + * aac_biosparm - return BIOS parameters for disk + * @sdev: The scsi device corresponding to the disk + * @bdev: the block device corresponding to the disk + * @capacity: the sector capacity of the disk + * @geom: geometry block to fill in + * + * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk. + * The default disk geometry is 64 heads, 32 sectors, and the appropriate + * number of cylinders so as not to exceed drive capacity. In order for + * disks equal to or larger than 1 GB to be addressable by the BIOS + * without exceeding the BIOS limitation of 1024 cylinders, Extended + * Translation should be enabled. With Extended Translation enabled, + * drives between 1 GB inclusive and 2 GB exclusive are given a disk + * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive + * are given a disk geometry of 255 heads and 63 sectors. However, if + * the BIOS detects that the Extended Translation setting does not match + * the geometry in the partition table, then the translation inferred + * from the partition table will be used by the BIOS, and a warning may + * be displayed. + */ + +static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int *geom) +{ + struct diskparm *param = (struct diskparm *)geom; + unsigned char *buf; + + dprintk((KERN_DEBUG "aac_biosparm.\n")); + + /* + * Assuming extended translation is enabled - #REVISIT# + */ + if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */ + if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */ + param->heads = 255; + param->sectors = 63; + } else { + param->heads = 128; + param->sectors = 32; + } + } else { + param->heads = 64; + param->sectors = 32; + } + + param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors); + + /* + * Read the first 1024 bytes from the disk device, if the boot + * sector partition table is valid, search for a partition table + * entry whose end_head matches one of the standard geometry + * translations ( 64/32, 128/32, 255/63 ). + */ + buf = scsi_bios_ptable(bdev); + if(*(unsigned short *)(buf + 0x40) == cpu_to_le16(0xaa55)) { + struct partition *first = (struct partition * )buf; + struct partition *entry = first; + int saved_cylinders = param->cylinders; + int num; + unsigned char end_head, end_sec; + + for(num = 0; num < 4; num++) { + end_head = entry->end_head; + end_sec = entry->end_sector & 0x3f; + + if(end_head == 63) { + param->heads = 64; + param->sectors = 32; + break; + } else if(end_head == 127) { + param->heads = 128; + param->sectors = 32; + break; + } else if(end_head == 254) { + param->heads = 255; + param->sectors = 63; + break; + } + entry++; + } + + if (num == 4) { + end_head = first->end_head; + end_sec = first->end_sector & 0x3f; + } + + param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors); + if (num < 4 && end_sec == param->sectors) { + if (param->cylinders != saved_cylinders) + dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n", + param->heads, param->sectors, num)); + } else if (end_head > 0 || end_sec > 0) { + dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n", + end_head + 1, end_sec, num)); + dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n", + param->heads, param->sectors)); + } + } + kfree(buf); + return 0; +} + +/** + * aac_slave_configure - compute queue depths + * @sdev: SCSI device we are considering + * + * Selects queue depths for each target device based on the host adapter's + * total capacity and the queue depth supported by the target device. + * A queue depth of one automatically disables tagged queueing. + */ + +static int aac_slave_configure(struct scsi_device *sdev) +{ + if (sdev->tagged_supported) + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128); + else + scsi_adjust_queue_depth(sdev, 0, 1); + return 0; +} + +static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg) +{ + struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + return aac_do_ioctl(dev, cmd, arg); +} + +/* + * XXX: does aac really need no error handling?? + */ +static int aac_eh_abort(struct scsi_cmnd *cmd) +{ + return FAILED; +} + +/* + * aac_eh_reset - Reset command handling + * @scsi_cmd: SCSI command block causing the reset + * + */ +static int aac_eh_reset(struct scsi_cmnd* cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct scsi_cmnd * command; + int count; + struct aac_dev * aac; + unsigned long flags; + + printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", + AAC_DRIVERNAME); + + + aac = (struct aac_dev *)host->hostdata; + if (aac_adapter_check_health(aac)) { + printk(KERN_ERR "%s: Host adapter appears dead\n", + AAC_DRIVERNAME); + return -ENODEV; + } + /* + * Wait for all commands to complete to this specific + * target (block maximum 60 seconds). + */ + for (count = 60; count; --count) { + int active = 0; + __shost_for_each_device(dev, host) { + spin_lock_irqsave(&dev->list_lock, flags); + list_for_each_entry(command, &dev->cmd_list, list) { + if (command->serial_number) { + active++; + break; + } + } + spin_unlock_irqrestore(&dev->list_lock, flags); + if (active) + break; + + } + /* + * We can exit If all the commands are complete + */ + if (active == 0) + return SUCCESS; + spin_unlock_irq(host->host_lock); + ssleep(1); + spin_lock_irq(host->host_lock); + } + printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME); + return -ETIMEDOUT; +} + +/** + * aac_cfg_open - open a configuration file + * @inode: inode being opened + * @file: file handle attached + * + * Called when the configuration device is opened. Does the needed + * set up on the handle and then returns + * + * Bugs: This needs extending to check a given adapter is present + * so we can support hot plugging, and to ref count adapters. + */ + +static int aac_cfg_open(struct inode *inode, struct file *file) +{ + struct aac_dev *aac; + unsigned minor = iminor(inode); + int err = -ENODEV; + + list_for_each_entry(aac, &aac_devices, entry) { + if (aac->id == minor) { + file->private_data = aac; + err = 0; + break; + } + } + + return 0; +} + +/** + * aac_cfg_ioctl - AAC configuration request + * @inode: inode of device + * @file: file handle + * @cmd: ioctl command code + * @arg: argument + * + * Handles a configuration ioctl. Currently this involves wrapping it + * up and feeding it into the nasty windowsalike glue layer. + * + * Bugs: Needs locking against parallel ioctls lower down + * Bugs: Needs to handle hot plugging + */ + +static int aac_cfg_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return aac_do_ioctl(file->private_data, cmd, (void __user *)arg); +} + +#ifdef CONFIG_COMPAT +static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + switch (cmd) { + case FSACTL_MINIPORT_REV_CHECK: + case FSACTL_SENDFIB: + case FSACTL_OPEN_GET_ADAPTER_FIB: + case FSACTL_CLOSE_GET_ADAPTER_FIB: + case FSACTL_SEND_RAW_SRB: + case FSACTL_GET_PCI_INFO: + case FSACTL_QUERY_DISK: + case FSACTL_DELETE_DISK: + case FSACTL_FORCE_DELETE_DISK: + case FSACTL_GET_CONTAINERS: + ret = aac_do_ioctl(dev, cmd, (void __user *)arg); + break; + + case FSACTL_GET_NEXT_ADAPTER_FIB: { + struct fib_ioctl __user *f; + + f = compat_alloc_user_space(sizeof(*f)); + ret = 0; + if (clear_user(f, sizeof(*f) != sizeof(*f))) + ret = -EFAULT; + if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32))) + ret = -EFAULT; + if (!ret) + ret = aac_do_ioctl(dev, cmd, (void __user *)arg); + break; + } + + default: + ret = -ENOIOCTLCMD; + break; + } + unlock_kernel(); + return ret; +} + +static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) +{ + struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg); +} + +static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg) +{ + return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg); +} +#endif + +static struct file_operations aac_cfg_fops = { + .owner = THIS_MODULE, + .ioctl = aac_cfg_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = aac_compat_cfg_ioctl, +#endif + .open = aac_cfg_open, +}; + +static struct scsi_host_template aac_driver_template = { + .module = THIS_MODULE, + .name = "AAC", + .proc_name = "aacraid", + .info = aac_info, + .ioctl = aac_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = aac_compat_ioctl, +#endif + .queuecommand = aac_queuecommand, + .bios_param = aac_biosparm, + .slave_configure = aac_slave_configure, + .eh_abort_handler = aac_eh_abort, + .eh_host_reset_handler = aac_eh_reset, + .can_queue = AAC_NUM_IO_FIB, + .this_id = 16, + .sg_tablesize = 16, + .max_sectors = 128, +#if (AAC_NUM_IO_FIB > 256) + .cmd_per_lun = 256, +#else + .cmd_per_lun = AAC_NUM_IO_FIB, +#endif + .use_clustering = ENABLE_CLUSTERING, +}; + + +static int __devinit aac_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned index = id->driver_data; + struct Scsi_Host *shost; + struct aac_dev *aac; + struct list_head *insert = &aac_devices; + int error = -ENODEV; + int unique_id = 0; + + list_for_each_entry(aac, &aac_devices, entry) { + if (aac->id > unique_id) + break; + insert = &aac->entry; + unique_id++; + } + + if (pci_enable_device(pdev)) + goto out; + + if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) || + pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL)) + goto out; + /* + * If the quirk31 bit is set, the adapter needs adapter + * to driver communication memory to be allocated below 2gig + */ + if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) + if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) || + pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL)) + goto out; + + pci_set_master(pdev); + + shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev)); + if (!shost) + goto out_disable_pdev; + + shost->irq = pdev->irq; + shost->base = pci_resource_start(pdev, 0); + shost->unique_id = unique_id; + + aac = (struct aac_dev *)shost->hostdata; + aac->scsi_host_ptr = shost; + aac->pdev = pdev; + aac->name = aac_driver_template.name; + aac->id = shost->unique_id; + aac->cardtype = index; + INIT_LIST_HEAD(&aac->entry); + + aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL); + if (!aac->fibs) + goto out_free_host; + spin_lock_init(&aac->fib_lock); + + if ((*aac_drivers[index].init)(aac)) + goto out_free_fibs; + + /* + * If we had set a smaller DMA mask earlier, set it to 4gig + * now since the adapter can dma data to at least a 4gig + * address space. + */ + if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) + if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL)) + goto out_free_fibs; + + aac_get_adapter_info(aac); + + /* + * max channel will be the physical channels plus 1 virtual channel + * all containers are on the virtual channel 0 + * physical channels are address by their actual physical number+1 + */ + if (aac->nondasd_support == 1) + shost->max_channel = aac_drivers[index].channels+1; + else + shost->max_channel = 1; + + aac_get_config_status(aac); + aac_get_containers(aac); + list_add(&aac->entry, insert); + + shost->max_id = aac->maximum_num_containers; + if (shost->max_id < MAXIMUM_NUM_CONTAINERS) + shost->max_id = MAXIMUM_NUM_CONTAINERS; + else + shost->this_id = shost->max_id; + + /* + * dmb - we may need to move the setting of these parms somewhere else once + * we get a fib that can report the actual numbers + */ + shost->max_lun = AAC_MAX_LUN; + + pci_set_drvdata(pdev, shost); + + error = scsi_add_host(shost, &pdev->dev); + if (error) + goto out_deinit; + scsi_scan_host(shost); + + return 0; + +out_deinit: + kill_proc(aac->thread_pid, SIGKILL, 0); + wait_for_completion(&aac->aif_completion); + + aac_send_shutdown(aac); + fib_map_free(aac); + pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys); + kfree(aac->queues); + free_irq(pdev->irq, aac); + iounmap(aac->regs.sa); + out_free_fibs: + kfree(aac->fibs); + kfree(aac->fsa_dev); + out_free_host: + scsi_host_put(shost); + out_disable_pdev: + pci_disable_device(pdev); + out: + return error; +} + +static void __devexit aac_remove_one(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = (struct aac_dev *)shost->hostdata; + + scsi_remove_host(shost); + + kill_proc(aac->thread_pid, SIGKILL, 0); + wait_for_completion(&aac->aif_completion); + + aac_send_shutdown(aac); + fib_map_free(aac); + pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, + aac->comm_phys); + kfree(aac->queues); + + free_irq(pdev->irq, aac); + iounmap(aac->regs.sa); + + kfree(aac->fibs); + + list_del(&aac->entry); + scsi_host_put(shost); + pci_disable_device(pdev); +} + +static struct pci_driver aac_pci_driver = { + .name = AAC_DRIVERNAME, + .id_table = aac_pci_tbl, + .probe = aac_probe_one, + .remove = __devexit_p(aac_remove_one), +}; + +static int __init aac_init(void) +{ + int error; + + printk(KERN_INFO "Red Hat/Adaptec aacraid driver (%s %s)\n", + AAC_DRIVER_VERSION, AAC_DRIVER_BUILD_DATE); + + error = pci_module_init(&aac_pci_driver); + if (error) + return error; + + aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops); + if (aac_cfg_major < 0) { + printk(KERN_WARNING + "aacraid: unable to register \"aac\" device.\n"); + } + return 0; +} + +static void __exit aac_exit(void) +{ + unregister_chrdev(aac_cfg_major, "aac"); + pci_unregister_driver(&aac_pci_driver); +} + +module_init(aac_init); +module_exit(aac_exit); |