summaryrefslogtreecommitdiffstats
path: root/drivers/sbus
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2008-08-26 22:25:03 -0700
committerDavid S. Miller <davem@davemloft.net>2008-08-29 02:13:08 -0700
commit902663f6ea4a2603bee0d88450aae2d653a46f5d (patch)
treed085c52ce6569c08c90ebfcf23871eed7bcedc3d /drivers/sbus
parent51e0f004a9ab9104acbe323c0b20e0279bf9be85 (diff)
downloadop-kernel-dev-902663f6ea4a2603bee0d88450aae2d653a46f5d.zip
op-kernel-dev-902663f6ea4a2603bee0d88450aae2d653a46f5d.tar.gz
sparc: Delete bare sbus char bpp driver, obsoleted by parport_sunbpp
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/sbus')
-rw-r--r--drivers/sbus/char/Kconfig8
-rw-r--r--drivers/sbus/char/Makefile1
-rw-r--r--drivers/sbus/char/bpp.c1055
-rw-r--r--drivers/sbus/sbus.c1
4 files changed, 0 insertions, 1065 deletions
diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig
index 400c65b..9cd54ec 100644
--- a/drivers/sbus/char/Kconfig
+++ b/drivers/sbus/char/Kconfig
@@ -30,14 +30,6 @@ config OBP_FLASH
The OpenBoot PROM on Ultra systems is flashable. If you want to be
able to upgrade the OBP firmware, say Y here.
-config SUN_BPP
- tristate "Bidirectional parallel port support (OBSOLETE)"
- depends on EXPERIMENTAL
- help
- Say Y here to support Sun's obsolete variant of IEEE1284
- bidirectional parallel port protocol as /dev/bppX. Can be built on
- x86 machines.
-
config SUN_VIDEOPIX
tristate "Videopix Frame Grabber (EXPERIMENTAL)"
depends on EXPERIMENTAL && (BROKEN || !64BIT)
diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile
index 7ab060e..d8b2d0c 100644
--- a/drivers/sbus/char/Makefile
+++ b/drivers/sbus/char/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_WATCHDOG_RIO) += riowatchdog.o
obj-$(CONFIG_OBP_FLASH) += flash.o
obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o
obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o
-obj-$(CONFIG_SUN_BPP) += bpp.o
obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o
obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o
obj-$(CONFIG_SUN_JSFLASH) += jsflash.o
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
deleted file mode 100644
index bba21e05..0000000
--- a/drivers/sbus/char/bpp.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/*
- * drivers/sbus/char/bpp.c
- *
- * Copyright (c) 1995 Picture Elements
- * Stephen Williams (steve@icarus.com)
- * Gus Baldauf (gbaldauf@ix.netcom.com)
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/smp_lock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#if defined(__i386__)
-# include <asm/system.h>
-#endif
-
-#if defined(__sparc__)
-# include <linux/init.h>
-# include <linux/delay.h> /* udelay() */
-
-# include <asm/oplib.h> /* OpenProm Library */
-# include <asm/sbus.h>
-#endif
-
-#include <asm/bpp.h>
-
-#define BPP_PROBE_CODE 0x55
-#define BPP_DELAY 100
-
-static const unsigned BPP_MAJOR = LP_MAJOR;
-static const char *bpp_dev_name = "bpp";
-
-/* When switching from compatibility to a mode where I can read, try
- the following mode first. */
-
-/* const unsigned char DEFAULT_ECP = 0x10; */
-static const unsigned char DEFAULT_ECP = 0x30;
-static const unsigned char DEFAULT_NIBBLE = 0x00;
-
-/*
- * These are 1284 time constraints, in units of jiffies.
- */
-
-static const unsigned long TIME_PSetup = 1;
-static const unsigned long TIME_PResponse = 6;
-static const unsigned long TIME_IDLE_LIMIT = 2000;
-
-/*
- * One instance per supported subdevice...
- */
-# define BPP_NO 3
-
-enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
-
-struct inst {
- unsigned present : 1; /* True if the hardware exists */
- unsigned enhanced : 1; /* True if the hardware in "enhanced" */
- unsigned opened : 1; /* True if the device is opened already */
- unsigned run_flag : 1; /* True if waiting for a repeate byte */
-
- unsigned char direction; /* 0 --> out, 0x20 --> IN */
- unsigned char pp_state; /* State of host controlled pins. */
- enum IEEE_Mode mode;
-
- unsigned char run_length;
- unsigned char repeat_byte;
-};
-
-static struct inst instances[BPP_NO];
-
-#if defined(__i386__)
-
-static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
-
-/*
- * These are for data access.
- * Control lines accesses are hidden in set_bits() and get_bits().
- * The exception is the probe procedure, which is system-dependent.
- */
-#define bpp_outb_p(data, base) outb_p((data), (base))
-#define bpp_inb(base) inb(base)
-#define bpp_inb_p(base) inb_p(base)
-
-/*
- * This method takes the pin values mask and sets the hardware pins to
- * the requested value: 1 == high voltage, 0 == low voltage. This
- * burries the annoying PC bit inversion and preserves the direction
- * flag.
- */
-static void set_pins(unsigned short pins, unsigned minor)
-{
- unsigned char bits = instances[minor].direction; /* == 0x20 */
-
- if (! (pins & BPP_PP_nStrobe)) bits |= 1;
- if (! (pins & BPP_PP_nAutoFd)) bits |= 2;
- if ( pins & BPP_PP_nInit) bits |= 4;
- if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
-
- instances[minor].pp_state = bits;
-
- outb_p(bits, base_addrs[minor]+2);
-}
-
-static unsigned short get_pins(unsigned minor)
-{
- unsigned short bits = 0;
-
- unsigned value = instances[minor].pp_state;
- if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
- if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
- if (value & 0x04) bits |= BPP_PP_nInit;
- if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
-
- value = inb_p(base_addrs[minor]+1);
- if (value & 0x08) bits |= BPP_GP_nFault;
- if (value & 0x10) bits |= BPP_GP_Select;
- if (value & 0x20) bits |= BPP_GP_PError;
- if (value & 0x40) bits |= BPP_GP_nAck;
- if (! (value & 0x80)) bits |= BPP_GP_Busy;
-
- return bits;
-}
-
-#endif /* __i386__ */
-
-#if defined(__sparc__)
-
-/*
- * Register block
- */
- /* DMA registers */
-#define BPP_CSR 0x00
-#define BPP_ADDR 0x04
-#define BPP_BCNT 0x08
-#define BPP_TST_CSR 0x0C
- /* Parallel Port registers */
-#define BPP_HCR 0x10
-#define BPP_OCR 0x12
-#define BPP_DR 0x14
-#define BPP_TCR 0x15
-#define BPP_OR 0x16
-#define BPP_IR 0x17
-#define BPP_ICR 0x18
-#define BPP_SIZE 0x1A
-
-/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */
-#define P_DEV_ID_MASK 0xf0000000 /* R */
-#define P_DEV_ID_ZEBRA 0x40000000
-#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */
-#define P_NA_LOADED 0x08000000 /* R NA wirtten but was not used */
-#define P_A_LOADED 0x04000000 /* R */
-#define P_DMA_ON 0x02000000 /* R DMA is not disabled */
-#define P_EN_NEXT 0x01000000 /* RW */
-#define P_TCI_DIS 0x00800000 /* RW TCI forbidden from interrupts */
-#define P_DIAG 0x00100000 /* RW Disables draining and resetting
- of P-FIFO on loading of P_ADDR*/
-#define P_BURST_SIZE 0x000c0000 /* RW SBus burst size */
-#define P_BURST_8 0x00000000
-#define P_BURST_4 0x00040000
-#define P_BURST_1 0x00080000 /* "No burst" write */
-#define P_TC 0x00004000 /* RW1 Term Count, can be cleared when
- P_EN_NEXT=1 */
-#define P_EN_CNT 0x00002000 /* RW */
-#define P_EN_DMA 0x00000200 /* RW */
-#define P_WRITE 0x00000100 /* R DMA dir, 1=to ram, 0=to port */
-#define P_RESET 0x00000080 /* RW */
-#define P_SLAVE_ERR 0x00000040 /* RW1 Access size error */
-#define P_INVALIDATE 0x00000020 /* W Drop P-FIFO */
-#define P_INT_EN 0x00000010 /* RW OK to P_INT_PEND||P_ERR_PEND */
-#define P_DRAINING 0x0000000c /* R P-FIFO is draining to memory */
-#define P_ERR_PEND 0x00000002 /* R */
-#define P_INT_PEND 0x00000001 /* R */
-
-/* BPP_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
-#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
-#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
-
-/* BPP_OCR. */
-#define P_OCR_MEM_CLR 0x8000
-#define P_OCR_DATA_SRC 0x4000 /* ) */
-#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
-#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
-#define P_OCR_ACK_DSEL 0x0800 /* ) */
-#define P_OCR_EN_DIAG 0x0400
-#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
-#define P_OCR_ACK_OP 0x0100 /* Ack operation */
-#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
-
-/* BPP_TCR */
-#define P_TCR_DIR 0x08
-#define P_TCR_BUSY 0x04
-#define P_TCR_ACK 0x02
-#define P_TCR_DS 0x01 /* Strobe */
-
-/* BPP_OR */
-#define P_OR_V3 0x20 /* ) */
-#define P_OR_V2 0x10 /* ) on Zebra only */
-#define P_OR_V1 0x08 /* ) */
-#define P_OR_INIT 0x04
-#define P_OR_AFXN 0x02 /* Auto Feed */
-#define P_OR_SLCT_IN 0x01
-
-/* BPP_IR */
-#define P_IR_PE 0x04
-#define P_IR_SLCT 0x02
-#define P_IR_ERR 0x01
-
-/* BPP_ICR */
-#define P_DS_IRQ 0x8000 /* RW1 */
-#define P_ACK_IRQ 0x4000 /* RW1 */
-#define P_BUSY_IRQ 0x2000 /* RW1 */
-#define P_PE_IRQ 0x1000 /* RW1 */
-#define P_SLCT_IRQ 0x0800 /* RW1 */
-#define P_ERR_IRQ 0x0400 /* RW1 */
-#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
-#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
-#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
-#define P_BUSY_IRQ_EN 0x0040 /* RW */
-#define P_PE_IRP 0x0020 /* RW 1= rising edge */
-#define P_PE_IRQ_EN 0x0010 /* RW */
-#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
-#define P_SLCT_IRQ_EN 0x0004 /* RW */
-#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
-#define P_ERR_IRQ_EN 0x0001 /* RW */
-
-static void __iomem *base_addrs[BPP_NO];
-
-#define bpp_outb_p(data, base) sbus_writeb(data, (base) + BPP_DR)
-#define bpp_inb_p(base) sbus_readb((base) + BPP_DR)
-#define bpp_inb(base) sbus_readb((base) + BPP_DR)
-
-static void set_pins(unsigned short pins, unsigned minor)
-{
- void __iomem *base = base_addrs[minor];
- unsigned char bits_tcr = 0, bits_or = 0;
-
- if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
- if ( pins & BPP_PP_nStrobe) bits_tcr |= P_TCR_DS;
-
- if ( pins & BPP_PP_nAutoFd) bits_or |= P_OR_AFXN;
- if (! (pins & BPP_PP_nInit)) bits_or |= P_OR_INIT;
- if (! (pins & BPP_PP_nSelectIn)) bits_or |= P_OR_SLCT_IN;
-
- sbus_writeb(bits_or, base + BPP_OR);
- sbus_writeb(bits_tcr, base + BPP_TCR);
-}
-
-/*
- * i386 people read output pins from a software image.
- * We may get them back from hardware.
- * Again, inversion of pins must he buried here.
- */
-static unsigned short get_pins(unsigned minor)
-{
- void __iomem *base = base_addrs[minor];
- unsigned short bits = 0;
- unsigned value_tcr = sbus_readb(base + BPP_TCR);
- unsigned value_ir = sbus_readb(base + BPP_IR);
- unsigned value_or = sbus_readb(base + BPP_OR);
-
- if (value_tcr & P_TCR_DS) bits |= BPP_PP_nStrobe;
- if (value_or & P_OR_AFXN) bits |= BPP_PP_nAutoFd;
- if (! (value_or & P_OR_INIT)) bits |= BPP_PP_nInit;
- if (! (value_or & P_OR_SLCT_IN)) bits |= BPP_PP_nSelectIn;
-
- if (value_ir & P_IR_ERR) bits |= BPP_GP_nFault;
- if (! (value_ir & P_IR_SLCT)) bits |= BPP_GP_Select;
- if (! (value_ir & P_IR_PE)) bits |= BPP_GP_PError;
- if (! (value_tcr & P_TCR_ACK)) bits |= BPP_GP_nAck;
- if (value_tcr & P_TCR_BUSY) bits |= BPP_GP_Busy;
-
- return bits;
-}
-
-#endif /* __sparc__ */
-
-static void snooze(unsigned long snooze_time, unsigned minor)
-{
- schedule_timeout_uninterruptible(snooze_time + 1);
-}
-
-static int wait_for(unsigned short set, unsigned short clr,
- unsigned long delay, unsigned minor)
-{
- unsigned short pins = get_pins(minor);
-
- unsigned long extime = 0;
-
- /*
- * Try a real fast scan for the first jiffy, in case the device
- * responds real good. The first while loop guesses an expire
- * time accounting for possible wraparound of jiffies.
- */
- while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
- while ( (time_before(jiffies, extime))
- && (((pins & set) != set) || ((pins & clr) != 0)) ) {
- pins = get_pins(minor);
- }
-
- delay -= 1;
-
- /*
- * If my delay expired or the pins are still not where I want
- * them, then resort to using the timer and greatly reduce my
- * sample rate. If the peripheral is going to be slow, this will
- * give the CPU up to some more worthy process.
- */
- while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-
- snooze(1, minor);
- pins = get_pins(minor);
- delay -= 1;
- }
-
- if (delay == 0) return -1;
- else return pins;
-}
-
-/*
- * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
- * errno means something broke, and I do not yet know how to fix it.
- */
-static int negotiate(unsigned char mode, unsigned minor)
-{
- int rc;
- unsigned short pins = get_pins(minor);
- if (pins & BPP_PP_nSelectIn) return -EIO;
-
-
- /* Event 0: Write the mode to the data lines */
- bpp_outb_p(mode, base_addrs[minor]);
-
- snooze(TIME_PSetup, minor);
-
- /* Event 1: Strobe the mode code into the peripheral */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Event 2: Peripheral responds as a 1284 device. */
- rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
- BPP_GP_nAck,
- TIME_PResponse,
- minor);
-
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 3: latch extensibility request */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
-
- /* ... quick nap while peripheral ponders the byte i'm sending...*/
- snooze(1, minor);
-
- /* Event 4: restore strobe, to ACK peripheral's response. */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Event 6: Peripheral latches response bits */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
- if (rc == -1) return -EIO;
-
- /* A 1284 device cannot refuse nibble mode */
- if (mode == DEFAULT_NIBBLE) return 0;
-
- if (pins & BPP_GP_Select) return 0;
-
- return -EPROTONOSUPPORT;
-}
-
-static int terminate(unsigned minor)
-{
- int rc;
-
- /* Event 22: Request termination of 1284 mode */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Events 23 and 24: ACK termination request. */
- rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
- BPP_GP_nAck,
- TIME_PSetup+TIME_PResponse,
- minor);
-
- instances[minor].direction = 0;
- instances[minor].mode = COMPATIBILITY;
-
- if (rc == -1) {
- return -EIO;
- }
-
- /* Event 25: Handshake by lowering nAutoFd */
- set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Event 26: Peripheral wiggles lines... */
-
- /* Event 27: Peripheral sets nAck HIGH to ack handshake */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) {
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
- return -EIO;
- }
-
- /* Event 28: Finish phase by raising nAutoFd */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- return 0;
-}
-
-static DEFINE_SPINLOCK(bpp_open_lock);
-
-/*
- * Allow only one process to open the device at a time.
- */
-static int bpp_open(struct inode *inode, struct file *f)
-{
- unsigned minor = iminor(inode);
- int ret;
-
- lock_kernel();
- spin_lock(&bpp_open_lock);
- ret = 0;
- if (minor >= BPP_NO) {
- ret = -ENODEV;
- } else {
- if (! instances[minor].present) {
- ret = -ENODEV;
- } else {
- if (instances[minor].opened)
- ret = -EBUSY;
- else
- instances[minor].opened = 1;
- }
- }
- spin_unlock(&bpp_open_lock);
- unlock_kernel();
-
- return ret;
-}
-
-/*
- * When the process closes the device, this method is called to clean
- * up and reset the hardware. Always leave the device in compatibility
- * mode as this is a reasonable place to clean up from messes made by
- * ioctls, or other mayhem.
- */
-static int bpp_release(struct inode *inode, struct file *f)
-{
- unsigned minor = iminor(inode);
-
- spin_lock(&bpp_open_lock);
- instances[minor].opened = 0;
-
- if (instances[minor].mode != COMPATIBILITY)
- terminate(minor);
-
- spin_unlock(&bpp_open_lock);
-
- return 0;
-}
-
-static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
-{
- unsigned long remaining = cnt;
- long rc;
-
- while (remaining > 0) {
- unsigned char byte = 0;
- int pins;
-
- /* Event 7: request nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
- /* Wait for event 9: Peripher strobes first nibble */
- pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
- if (pins == -1) return -ETIMEDOUT;
-
- /* Event 10: I handshake nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
- if (pins & BPP_GP_nFault) byte |= 0x01;
- if (pins & BPP_GP_Select) byte |= 0x02;
- if (pins & BPP_GP_PError) byte |= 0x04;
- if (pins & BPP_GP_Busy) byte |= 0x08;
-
- /* Wait for event 11: Peripheral handshakes nibble */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-
- /* Event 7: request nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
- /* Wait for event 9: Peripher strobes first nibble */
- pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 10: I handshake nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
- if (pins & BPP_GP_nFault) byte |= 0x10;
- if (pins & BPP_GP_Select) byte |= 0x20;
- if (pins & BPP_GP_PError) byte |= 0x40;
- if (pins & BPP_GP_Busy) byte |= 0x80;
-
- if (put_user(byte, c))
- return -EFAULT;
- c += 1;
- remaining -= 1;
-
- /* Wait for event 11: Peripheral handshakes nibble */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) return -EIO;
- }
-
- return cnt - remaining;
-}
-
-static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
-{
- unsigned long remaining;
- long rc;
-
- /* Turn ECP mode from forward to reverse if needed. */
- if (! instances[minor].direction) {
- unsigned short pins = get_pins(minor);
-
- /* Event 38: Turn the bus around */
- instances[minor].direction = 0x20;
- pins &= ~BPP_PP_nAutoFd;
- set_pins(pins, minor);
-
- /* Event 39: Set pins for reverse mode. */
- snooze(TIME_PSetup, minor);
- set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
- /* Wait for event 40: Peripheral ready to be strobed */
- rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
- }
-
- remaining = cnt;
-
- while (remaining > 0) {
-
- /* If there is a run length for a repeated byte, repeat */
- /* that byte a few times. */
- if (instances[minor].run_length && !instances[minor].run_flag) {
-
- char buffer[128];
- unsigned idx;
- unsigned repeat = remaining < instances[minor].run_length
- ? remaining
- : instances[minor].run_length;
-
- for (idx = 0 ; idx < repeat ; idx += 1)
- buffer[idx] = instances[minor].repeat_byte;
-
- if (copy_to_user(c, buffer, repeat))
- return -EFAULT;
- remaining -= repeat;
- c += repeat;
- instances[minor].run_length -= repeat;
- }
-
- if (remaining == 0) break;
-
-
- /* Wait for Event 43: Data active on the bus. */
- rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
- if (rc == -1) break;
-
- if (rc & BPP_GP_Busy) {
- /* OK, this is data. read it in. */
- unsigned char byte = bpp_inb(base_addrs[minor]);
- if (put_user(byte, c))
- return -EFAULT;
- c += 1;
- remaining -= 1;
-
- if (instances[minor].run_flag) {
- instances[minor].repeat_byte = byte;
- instances[minor].run_flag = 0;
- }
-
- } else {
- unsigned char byte = bpp_inb(base_addrs[minor]);
- if (byte & 0x80) {
- printk("bpp%d: "
- "Ignoring ECP channel %u from device.\n",
- minor, byte & 0x7f);
- } else {
- instances[minor].run_length = byte;
- instances[minor].run_flag = 1;
- }
- }
-
- /* Event 44: I got it. */
- set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
-
- /* Wait for event 45: peripheral handshake */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 46: Finish handshake */
- set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
- }
-
-
- return cnt - remaining;
-}
-
-static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
-{
- long rc;
- unsigned minor = iminor(f->f_path.dentry->d_inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
- switch (instances[minor].mode) {
-
- default:
- if (instances[minor].mode != COMPATIBILITY)
- terminate(minor);
-
- if (instances[minor].enhanced) {
- /* For now, do all reads with ECP-RLE mode */
- unsigned short pins;
-
- rc = negotiate(DEFAULT_ECP, minor);
- if (rc < 0) break;
-
- instances[minor].mode = ECP_RLE;
-
- /* Event 30: set nAutoFd low to setup for ECP mode */
- pins = get_pins(minor);
- pins &= ~BPP_PP_nAutoFd;
- set_pins(pins, minor);
-
- /* Wait for Event 31: peripheral ready */
- rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- rc = read_ecp(minor, c, cnt);
-
- } else {
- rc = negotiate(DEFAULT_NIBBLE, minor);
- if (rc < 0) break;
-
- instances[minor].mode = NIBBLE;
-
- rc = read_nibble(minor, c, cnt);
- }
- break;
-
- case NIBBLE:
- rc = read_nibble(minor, c, cnt);
- break;
-
- case ECP:
- case ECP_RLE:
- rc = read_ecp(minor, c, cnt);
- break;
-
- }
-
-
- return rc;
-}
-
-/*
- * Compatibility mode handshaking is a matter of writing data,
- * strobing it, and waiting for the printer to stop being busy.
- */
-static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
-{
- long rc;
- unsigned short pins = get_pins(minor);
-
- unsigned long remaining = cnt;
-
-
- while (remaining > 0) {
- unsigned char byte;
-
- if (get_user(byte, c))
- return -EFAULT;
- c += 1;
-
- rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- bpp_outb_p(byte, base_addrs[minor]);
- remaining -= 1;
- /* snooze(1, minor); */
-
- pins &= ~BPP_PP_nStrobe;
- set_pins(pins, minor);
-
- rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-
- pins |= BPP_PP_nStrobe;
- set_pins(pins, minor);
- }
-
- return cnt - remaining;
-}
-
-/*
- * Write data using ECP mode. Watch out that the port may be set up
- * for reading. If so, turn the port around.
- */
-static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
-{
- unsigned short pins = get_pins(minor);
- unsigned long remaining = cnt;
-
- if (instances[minor].direction) {
- int rc;
-
- /* Event 47 Request bus be turned around */
- pins |= BPP_PP_nInit;
- set_pins(pins, minor);
-
- /* Wait for Event 49: Peripheral relinquished bus */
- rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-
- pins |= BPP_PP_nAutoFd;
- instances[minor].direction = 0;
- set_pins(pins, minor);
- }
-
- while (remaining > 0) {
- unsigned char byte;
- int rc;
-
- if (get_user(byte, c))
- return -EFAULT;
-
- rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- c += 1;
-
- bpp_outb_p(byte, base_addrs[minor]);
-
- pins &= ~BPP_PP_nStrobe;
- set_pins(pins, minor);
-
- pins |= BPP_PP_nStrobe;
- rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
- if (rc == -1) return -EIO;
-
- set_pins(pins, minor);
- }
-
- return cnt - remaining;
-}
-
-/*
- * Write to the peripheral. Be sensitive of the current mode. If I'm
- * in a mode that can be turned around (ECP) then just do
- * that. Otherwise, terminate and do my writing in compat mode. This
- * is the safest course as any device can handle it.
- */
-static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
-{
- long errno = 0;
- unsigned minor = iminor(f->f_path.dentry->d_inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
- switch (instances[minor].mode) {
-
- case ECP:
- case ECP_RLE:
- errno = write_ecp(minor, c, cnt);
- break;
- case COMPATIBILITY:
- errno = write_compat(minor, c, cnt);
- break;
- default:
- terminate(minor);
- errno = write_compat(minor, c, cnt);
- }
-
- return errno;
-}
-
-static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
- unsigned long arg)
-{
- int errno = 0;
-
- unsigned minor = iminor(inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
-
- switch (cmd) {
-
- case BPP_PUT_PINS:
- set_pins(arg, minor);
- break;
-
- case BPP_GET_PINS:
- errno = get_pins(minor);
- break;
-
- case BPP_PUT_DATA:
- bpp_outb_p(arg, base_addrs[minor]);
- break;
-
- case BPP_GET_DATA:
- errno = bpp_inb_p(base_addrs[minor]);
- break;
-
- case BPP_SET_INPUT:
- if (arg)
- if (instances[minor].enhanced) {
- unsigned short bits = get_pins(minor);
- instances[minor].direction = 0x20;
- set_pins(bits, minor);
- } else {
- errno = -ENOTTY;
- }
- else {
- unsigned short bits = get_pins(minor);
- instances[minor].direction = 0x00;
- set_pins(bits, minor);
- }
- break;
-
- default:
- errno = -EINVAL;
- }
-
- return errno;
-}
-
-static const struct file_operations bpp_fops = {
- .owner = THIS_MODULE,
- .read = bpp_read,
- .write = bpp_write,
- .ioctl = bpp_ioctl,
- .open = bpp_open,
- .release = bpp_release,
-};
-
-#if defined(__i386__)
-
-#define collectLptPorts() {}
-
-static void probeLptPort(unsigned idx)
-{
- unsigned int testvalue;
- const unsigned short lpAddr = base_addrs[idx];
-
- instances[idx].present = 0;
- instances[idx].enhanced = 0;
- instances[idx].direction = 0;
- instances[idx].mode = COMPATIBILITY;
- instances[idx].run_length = 0;
- instances[idx].run_flag = 0;
- if (!request_region(lpAddr,3, bpp_dev_name)) return;
-
- /*
- * First, make sure the instance exists. Do this by writing to
- * the data latch and reading the value back. If the port *is*
- * present, test to see if it supports extended-mode
- * operation. This will be required for IEEE1284 reverse
- * transfers.
- */
-
- outb_p(BPP_PROBE_CODE, lpAddr);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- testvalue = inb_p(lpAddr);
- if (testvalue == BPP_PROBE_CODE) {
- unsigned save;
- instances[idx].present = 1;
-
- save = inb_p(lpAddr+2);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- outb_p(save|0x20, lpAddr+2);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- outb_p(~BPP_PROBE_CODE, lpAddr);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- testvalue = inb_p(lpAddr);
- if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
- instances[idx].enhanced = 0;
- else
- instances[idx].enhanced = 1;
- outb_p(save, lpAddr+2);
- }
- else {
- release_region(lpAddr,3);
- }
- /*
- * Leave the port in compat idle mode.
- */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
- printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
- instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
-}
-
-static inline void freeLptPort(int idx)
-{
- release_region(base_addrs[idx], 3);
-}
-
-#endif
-
-#if defined(__sparc__)
-
-static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
-{
- return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
-}
-
-static int collectLptPorts(void)
-{
- struct sbus_bus *bus;
- struct sbus_dev *dev;
- int count;
-
- count = 0;
- for_all_sbusdev(dev, bus) {
- if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
- if (count >= BPP_NO) {
- printk(KERN_NOTICE
- "bpp: More than %d bpp ports,"
- " rest is ignored\n", BPP_NO);
- return count;
- }
- base_addrs[count] = map_bpp(dev, count);
- count++;
- }
- }
- return count;
-}
-
-static void probeLptPort(unsigned idx)
-{
- void __iomem *rp = base_addrs[idx];
- __u32 csr;
- char *brand;
-
- instances[idx].present = 0;
- instances[idx].enhanced = 0;
- instances[idx].direction = 0;
- instances[idx].mode = COMPATIBILITY;
- instances[idx].run_length = 0;
- instances[idx].run_flag = 0;
-
- if (!rp) return;
-
- instances[idx].present = 1;
- instances[idx].enhanced = 1; /* Sure */
-
- csr = sbus_readl(rp + BPP_CSR);
- if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
- udelay(20);
- csr = sbus_readl(rp + BPP_CSR);
- if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
- printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
- }
- }
- printk("bpp%d: reset with 0x%08x ..", idx, csr);
- sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
- udelay(500);
- sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
- csr = sbus_readl(rp + BPP_CSR);
- printk(" done with csr=0x%08x ocr=0x%04x\n",
- csr, sbus_readw(rp + BPP_OCR));
-
- switch (csr & P_DEV_ID_MASK) {
- case P_DEV_ID_ZEBRA:
- brand = "Zebra";
- break;
- case P_DEV_ID_L64854:
- brand = "DMA2";
- break;
- default:
- brand = "Unknown";
- }
- printk("bpp%d: %s at %p\n", idx, brand, rp);
-
- /*
- * Leave the port in compat idle mode.
- */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
- return;
-}
-
-static inline void freeLptPort(int idx)
-{
- sbus_iounmap(base_addrs[idx], BPP_SIZE);
-}
-
-#endif
-
-static int __init bpp_init(void)
-{
- int rc;
- unsigned idx;
-
- rc = collectLptPorts();
- if (rc == 0)
- return -ENODEV;
-
- rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
- if (rc < 0)
- return rc;
-
- for (idx = 0; idx < BPP_NO; idx++) {
- instances[idx].opened = 0;
- probeLptPort(idx);
- }
-
- return 0;
-}
-
-static void __exit bpp_cleanup(void)
-{
- unsigned idx;
-
- unregister_chrdev(BPP_MAJOR, bpp_dev_name);
-
- for (idx = 0; idx < BPP_NO; idx++) {
- if (instances[idx].present)
- freeLptPort(idx);
- }
-}
-
-module_init(bpp_init);
-module_exit(bpp_cleanup);
-
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 9c12924..53e5e7b 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -14,7 +14,6 @@
#include <asm/dma.h>
#include <asm/oplib.h>
#include <asm/prom.h>
-#include <asm/bpp.h>
#include <asm/irq.h>
static ssize_t
OpenPOWER on IntegriCloud