summaryrefslogtreecommitdiffstats
path: root/drivers/s390/scsi
diff options
context:
space:
mode:
authorChristof Schmitt <christof.schmitt@de.ibm.com>2009-08-18 15:43:27 +0200
committerJames Bottomley <James.Bottomley@suse.de>2009-09-05 08:49:41 -0500
commit143bb6bfe36d20618d8bf667915fe14d14b8ae2f (patch)
treec0c1dad94d0ec49f25b3652581931f2b499b5f07 /drivers/s390/scsi
parent98fc4d5c8cd9bd1a412cca922feecb54c1c22d8e (diff)
downloadop-kernel-dev-143bb6bfe36d20618d8bf667915fe14d14b8ae2f.zip
op-kernel-dev-143bb6bfe36d20618d8bf667915fe14d14b8ae2f.tar.gz
[SCSI] zfcp: Defer resource allocation to first ccw_set_online call
So far, zfcp allocated all resources required for FCP adapters/subchannels when the device was discovered in the ccw_probe callback. If there are lots of unused FCP subchannels attached to a system, this is a waste of resources. To alleviate this, defer the resource allocation to the first call to ccw_set_online. To avoid disruptions during possible following calls to ccw_set_offline and then ccw_set_online, keep the adapter resources until the device is finally being removed via ccw_remove. While doing this, also manage the zfcp erp thread together with all other adapter resources in zfcp_adapter_enqueue/dequeue. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/s390/scsi')
-rw-r--r--drivers/s390/scsi/zfcp_aux.c6
-rw-r--r--drivers/s390/scsi/zfcp_ccw.c74
-rw-r--r--drivers/s390/scsi/zfcp_erp.c5
3 files changed, 54 insertions, 31 deletions
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index e8f39f0..d1e75d3 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -541,6 +541,9 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
rwlock_init(&adapter->erp_lock);
rwlock_init(&adapter->abort_lock);
+ if (zfcp_erp_thread_setup(adapter))
+ goto erp_thread_failed;
+
INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
INIT_WORK(&adapter->scan_work, _zfcp_fc_scan_ports_later);
@@ -561,6 +564,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
return 0;
sysfs_failed:
+ zfcp_erp_thread_kill(adapter);
+erp_thread_failed:
zfcp_fc_gs_destroy(adapter);
generic_services_failed:
zfcp_destroy_adapter_work_queue(adapter);
@@ -602,6 +607,7 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
return;
zfcp_fc_gs_destroy(adapter);
+ zfcp_erp_thread_kill(adapter);
zfcp_destroy_adapter_work_queue(adapter);
zfcp_dbf_adapter_unregister(adapter->dbf);
zfcp_free_low_mem_buffers(adapter);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index d9da5c4..82ae6ed 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -18,6 +18,9 @@ static int zfcp_ccw_suspend(struct ccw_device *cdev)
{
struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+ if (!adapter)
+ return 0;
+
down(&zfcp_data.config_sema);
zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
@@ -33,6 +36,9 @@ static int zfcp_ccw_activate(struct ccw_device *cdev)
{
struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+ if (!adapter)
+ return 0;
+
zfcp_erp_modify_adapter_status(adapter, "ccresu1", NULL,
ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
@@ -63,25 +69,14 @@ int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
* zfcp_ccw_probe - probe function of zfcp driver
* @ccw_device: pointer to belonging ccw device
*
- * This function gets called by the common i/o layer and sets up the initial
- * data structures for each fcp adapter, which was detected by the system.
- * Also the sysfs files for this adapter will be created by this function.
- * In addition the nameserver port will be added to the ports of the adapter
- * and its sysfs representation will be created too.
+ * This function gets called by the common i/o layer for each FCP
+ * device found on the current system. This is only a stub to make cio
+ * work: To only allocate adapter resources for devices actually used,
+ * the allocation is deferred to the first call to ccw_set_online.
*/
static int zfcp_ccw_probe(struct ccw_device *ccw_device)
{
- int retval = 0;
-
- down(&zfcp_data.config_sema);
- if (zfcp_adapter_enqueue(ccw_device)) {
- dev_err(&ccw_device->dev,
- "Setting up data structures for the "
- "FCP adapter failed\n");
- retval = -EINVAL;
- }
- up(&zfcp_data.config_sema);
- return retval;
+ return 0;
}
/**
@@ -102,8 +97,11 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
LIST_HEAD(port_remove_lh);
ccw_device_set_offline(ccw_device);
+
down(&zfcp_data.config_sema);
adapter = dev_get_drvdata(&ccw_device->dev);
+ if (!adapter)
+ goto out;
write_lock_irq(&zfcp_data.config_lock);
list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
@@ -129,6 +127,7 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
zfcp_adapter_dequeue(adapter);
+out:
up(&zfcp_data.config_sema);
}
@@ -136,22 +135,33 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
* zfcp_ccw_set_online - set_online function of zfcp driver
* @ccw_device: pointer to belonging ccw device
*
- * This function gets called by the common i/o layer and sets an adapter
- * into state online. Setting an fcp device online means that it will be
- * registered with the SCSI stack, that the QDIO queues will be set up
- * and that the adapter will be opened (asynchronously).
+ * This function gets called by the common i/o layer and sets an
+ * adapter into state online. The first call will allocate all
+ * adapter resources that will be retained until the device is removed
+ * via zfcp_ccw_remove.
+ *
+ * Setting an fcp device online means that it will be registered with
+ * the SCSI stack, that the QDIO queues will be set up and that the
+ * adapter will be opened.
*/
static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
{
struct zfcp_adapter *adapter;
- int retval;
+ int ret = 0;
down(&zfcp_data.config_sema);
adapter = dev_get_drvdata(&ccw_device->dev);
- retval = zfcp_erp_thread_setup(adapter);
- if (retval)
- goto out;
+ if (!adapter) {
+ ret = zfcp_adapter_enqueue(ccw_device);
+ if (ret) {
+ dev_err(&ccw_device->dev,
+ "Setting up data structures for the "
+ "FCP adapter failed\n");
+ goto out;
+ }
+ adapter = dev_get_drvdata(&ccw_device->dev);
+ }
/* initialize request counter */
BUG_ON(!zfcp_reqlist_isempty(adapter));
@@ -162,13 +172,11 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
"ccsonl2", NULL);
zfcp_erp_wait(adapter);
+out:
up(&zfcp_data.config_sema);
- flush_work(&adapter->scan_work);
- return 0;
-
- out:
- up(&zfcp_data.config_sema);
- return retval;
+ if (!ret)
+ flush_work(&adapter->scan_work);
+ return ret;
}
/**
@@ -184,10 +192,13 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
down(&zfcp_data.config_sema);
adapter = dev_get_drvdata(&ccw_device->dev);
+ if (!adapter)
+ goto out;
+
zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
zfcp_erp_wait(adapter);
- zfcp_erp_thread_kill(adapter);
up(&zfcp_data.config_sema);
+out:
return 0;
}
@@ -244,6 +255,7 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
adapter = dev_get_drvdata(&cdev->dev);
zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
zfcp_erp_wait(adapter);
+ zfcp_erp_thread_kill(adapter);
up(&zfcp_data.config_sema);
}
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 577e157..73d366b 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -150,6 +150,9 @@ static int zfcp_erp_required_act(int want, struct zfcp_adapter *adapter,
a_status = atomic_read(&adapter->status);
if (a_status & ZFCP_STATUS_COMMON_ERP_INUSE)
return 0;
+ if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) &&
+ !(a_status & ZFCP_STATUS_COMMON_OPEN))
+ return 0; /* shutdown requested for closed adapter */
}
return need;
@@ -1349,6 +1352,8 @@ void zfcp_erp_thread_kill(struct zfcp_adapter *adapter)
{
kthread_stop(adapter->erp_thread);
adapter->erp_thread = NULL;
+ WARN_ON(!list_empty(&adapter->erp_ready_head));
+ WARN_ON(!list_empty(&adapter->erp_running_head));
}
/**
OpenPOWER on IntegriCloud