summaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio/cio.c
diff options
context:
space:
mode:
authorMartin Schwidefsky <schwidefsky@de.ibm.com>2013-06-27 09:01:09 +0200
committerMartin Schwidefsky <schwidefsky@de.ibm.com>2013-08-22 12:20:04 +0200
commit1f44a225777e40fd9a945b09f958052c47494e1e (patch)
treec33f67424d4cb06f481883b25e75390eccd15ca7 /drivers/s390/cio/cio.c
parent5d0d8f43535bc4e19406ecf158340ccc4027a477 (diff)
downloadop-kernel-dev-1f44a225777e40fd9a945b09f958052c47494e1e.zip
op-kernel-dev-1f44a225777e40fd9a945b09f958052c47494e1e.tar.gz
s390: convert interrupt handling to use generic hardirq
With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Diffstat (limited to 'drivers/s390/cio/cio.c')
-rw-r--r--drivers/s390/cio/cio.c46
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 4eeb4a6..d7da67a 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -561,37 +561,23 @@ out:
}
/*
- * do_IRQ() handles all normal I/O device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- *
+ * do_cio_interrupt() handles all normal I/O device IRQ's
*/
-void __irq_entry do_IRQ(struct pt_regs *regs)
+static irqreturn_t do_cio_interrupt(int irq, void *dummy)
{
- struct tpi_info *tpi_info = (struct tpi_info *) &regs->int_code;
+ struct tpi_info *tpi_info;
struct subchannel *sch;
struct irb *irb;
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__this_cpu_write(s390_idle.nohz_delay, 1);
- if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
- /* Serve timer interrupts first. */
- clock_comparator_work();
-
- kstat_incr_irqs_this_cpu(IO_INTERRUPT, NULL);
+ tpi_info = (struct tpi_info *) &get_irq_regs()->int_code;
irb = (struct irb *) &S390_lowcore.irb;
- if (tpi_info->adapter_IO) {
- do_adapter_IO(tpi_info->isc);
- goto out;
- }
sch = (struct subchannel *)(unsigned long) tpi_info->intparm;
if (!sch) {
/* Clear pending interrupt condition. */
inc_irq_stat(IRQIO_CIO);
tsch(tpi_info->schid, irb);
- goto out;
+ return IRQ_HANDLED;
}
spin_lock(sch->lock);
/* Store interrupt response block to lowcore. */
@@ -606,9 +592,23 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
} else
inc_irq_stat(IRQIO_CIO);
spin_unlock(sch->lock);
-out:
- irq_exit();
- set_irq_regs(old_regs);
+
+ return IRQ_HANDLED;
+}
+
+static struct irq_desc *irq_desc_io;
+
+static struct irqaction io_interrupt = {
+ .name = "IO",
+ .handler = do_cio_interrupt,
+};
+
+void __init init_cio_interrupts(void)
+{
+ irq_set_chip_and_handler(IO_INTERRUPT,
+ &dummy_irq_chip, handle_percpu_irq);
+ setup_irq(IO_INTERRUPT, &io_interrupt);
+ irq_desc_io = irq_to_desc(IO_INTERRUPT);
}
#ifdef CONFIG_CCW_CONSOLE
@@ -635,7 +635,7 @@ void cio_tsch(struct subchannel *sch)
local_bh_disable();
irq_enter();
}
- kstat_incr_irqs_this_cpu(IO_INTERRUPT, NULL);
+ kstat_incr_irqs_this_cpu(IO_INTERRUPT, irq_desc_io);
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
else
OpenPOWER on IntegriCloud