[S390] Kconfig: use common Kconfig files for s390.

Disband drivers/s390/Kconfig, use the common Kconfig files. The s390
specific config options from drivers/s390/Kconfig are moved to the
respective common Kconfig files.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 0 insertions, 239 deletions

diff --git a/drivers/s390/Kconfig b/drivers/s390/Kconfig
deleted file mode 100644
index 165af39..0000000
--- a/drivers/s390/Kconfig
+++ /dev/null
@@ -1,239 +0,0 @@
-config CCW
-	bool
-	default y
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-
-menu "Character device drivers"
-
-config UNIX98_PTYS
-	bool "Unix98 PTY support"
-	---help---
-	  A pseudo terminal (PTY) is a software device consisting of two
-	  halves: a master and a slave. The slave device behaves identical to
-	  a physical terminal; the master device is used by a process to
-	  read data from and write data to the slave, thereby emulating a
-	  terminal. Typical programs for the master side are telnet servers
-	  and xterms.
-
-	  Linux has traditionally used the BSD-like names /dev/ptyxx for
-	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-	  has a number of problems. The GNU C library glibc 2.1 and later,
-	  however, supports the Unix98 naming standard: in order to acquire a
-	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-	  terminal is then made available to the process and the pseudo
-	  terminal slave can be accessed as /dev/pts/<number>. What was
-	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-	  The entries in /dev/pts/ are created on the fly by a virtual
-	  file system; therefore, if you say Y here you should say Y to
-	  "/dev/pts file system for Unix98 PTYs" as well.
-
-	  If you want to say Y here, you need to have the C library glibc 2.1
-	  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
-	  Read the instructions in <file:Documentation/Changes> pertaining to
-	  pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HANGCHECK_TIMER
-	tristate "Hangcheck timer"
-	help
-	  The hangcheck-timer module detects when the system has gone
-	  out to lunch past a certain margin.  It can reboot the system
-	  or merely print a warning.
-
-source "drivers/char/watchdog/Kconfig"
-
-comment "S/390 character device drivers"
-
-config TN3270
-	tristate "Support for locally attached 3270 terminals"
-	help
-	  Include support for IBM 3270 terminals.
-
-config TN3270_TTY
-	tristate "Support for tty input/output on 3270 terminals"
-	depends on TN3270
-	help
-	  Include support for using an IBM 3270 terminal as a Linux tty.
-
-config TN3270_FS
-	tristate "Support for fullscreen applications on 3270 terminals"
-	depends on TN3270
-	help
-	  Include support for fullscreen applications on an IBM 3270 terminal.
-
-config TN3270_CONSOLE
-	bool "Support for console on 3270 terminal"
-	depends on TN3270=y && TN3270_TTY=y
-	help
-	  Include support for using an IBM 3270 terminal as a Linux system
-	  console.  Available only if 3270 support is compiled in statically.
-
-config TN3215
-	bool "Support for 3215 line mode terminal"
-	help
-	  Include support for IBM 3215 line-mode terminals.
-
-config TN3215_CONSOLE
-	bool "Support for console on 3215 line mode terminal"
-	depends on TN3215
-	help
-	  Include support for using an IBM 3215 line-mode terminal as a
-	  Linux system console.
-
-config CCW_CONSOLE
- 	bool
- 	depends on TN3215_CONSOLE || TN3270_CONSOLE
- 	default y
- 
-config SCLP_TTY
-	bool "Support for SCLP line mode terminal"
-	help
-	  Include support for IBM SCLP line-mode terminals.
-
-config SCLP_CONSOLE
-	bool "Support for console on SCLP line mode terminal"
-	depends on SCLP_TTY
-	help
-	  Include support for using an IBM HWC line-mode terminal as the Linux
-	  system console.
-
-config SCLP_VT220_TTY
-	bool "Support for SCLP VT220-compatible terminal"
-	help
-	  Include support for an IBM SCLP VT220-compatible terminal.
-
-config SCLP_VT220_CONSOLE
-	bool "Support for console on SCLP VT220-compatible terminal"
-	depends on SCLP_VT220_TTY
-	help
-	  Include support for using an IBM SCLP VT220-compatible terminal as a
-	  Linux system console.
-
-config SCLP_CPI
-	tristate "Control-Program Identification"
-	help
-	  This option enables the hardware console interface for system
-	  identification. This is commonly used for workload management and
-	  gives you a nice name for the system on the service element.
-	  Please select this option as a module since built-in operation is
-	  completely untested.
-	  You should only select this option if you know what you are doing,
-	  need this feature and intend to run your kernel in LPAR.
-
-config S390_TAPE
-	tristate "S/390 tape device support"
-	help
-	  Select this option if you want to access channel-attached tape
-	  devices on IBM S/390 or zSeries.
-	  If you select this option you will also want to select at
-	  least one of the tape interface options and one of the tape
-	  hardware options in order to access a tape device.
-	  This option is also available as a module. The module will be
-	  called tape390 and include all selected interfaces and
-	  hardware drivers.
-
-comment "S/390 tape interface support"
-	depends on S390_TAPE
-
-config S390_TAPE_BLOCK
-	bool "Support for tape block devices"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access your channel-attached tape
-	  devices using the block device interface.  This interface is similar
-	  to CD-ROM devices on other platforms.  The tapes can only be
-	  accessed read-only when using this interface.  Have a look at
-	  <file:Documentation/s390/TAPE> for further information about creating
-	  volumes for and using this interface.  It is safe to say "Y" here.
-
-comment "S/390 tape hardware support"
-	depends on S390_TAPE
-
-config S390_TAPE_34XX
-	tristate "Support for 3480/3490 tape hardware"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access IBM 3480/3490 magnetic
-	  tape subsystems and 100% compatibles.
-	  It is safe to say "Y" here.
-
-config S390_TAPE_3590
-	tristate "Support for 3590 tape hardware"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access IBM 3590 magnetic
-	  tape subsystems and 100% compatibles.
-	  It is safe to say "Y" here.
-
-config VMLOGRDR
-	tristate "Support for the z/VM recording system services (VM only)"
-	depends on IUCV
-	help
-	  Select this option if you want to be able to receive records collected
-	  by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
-	  *SYMPTOM.
-	  This driver depends on the IUCV support driver.
-
-config VMCP
-	tristate "Support for the z/VM CP interface (VM only)"
-	help
-	  Select this option if you want to be able to interact with the control
-	  program on z/VM
-
-
-config MONREADER
-	tristate "API for reading z/VM monitor service records"
-	depends on IUCV
-	help
-	  Character device driver for reading z/VM monitor service records
-
-config MONWRITER
-	tristate "API for writing z/VM monitor service records"
-	default "m"
-	help
-	  Character device driver for writing z/VM monitor service records
-
-endmenu
-
-menu "Cryptographic devices"
-
-config ZCRYPT
-	tristate "Support for PCI-attached cryptographic adapters"
-	select ZCRYPT_MONOLITHIC if ZCRYPT="y"
-	default "m"
-	help
-	  Select this option if you want to use a PCI-attached cryptographic
-	  adapter like:
-	  + PCI Cryptographic Accelerator (PCICA)
-	  + PCI Cryptographic Coprocessor (PCICC)
-	  + PCI-X Cryptographic Coprocessor (PCIXCC)
-	  + Crypto Express2 Coprocessor (CEX2C)
-	  + Crypto Express2 Accelerator (CEX2A)
-
-config ZCRYPT_MONOLITHIC
-	bool "Monolithic zcrypt module"
-	depends on ZCRYPT="m"
-	help
-	  Select this option if you want to have a single module z90crypt.ko
-	  that contains all parts of the crypto device driver (ap bus,
-	  request router and all the card drivers).
-
-endmenu