drivers/rtc/rtc-x1205.c: fix checkpatch issues

Fixes the following types of issues:

  ERROR: do not use assignment in if condition
  ERROR: open brace '{' following struct go on the same line
  ERROR: else should follow close brace '}'
  WARNING: please, no space before tabs

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 20 insertions, 13 deletions

diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index fa9b067..365dc65 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -4,7 +4,7 @@
  * Copyright 2005 Alessandro Zummo
  *
  * please send all reports to:
- * 	Karen Spearel <kas111 at gmail dot com>
+ *	Karen Spearel <kas111 at gmail dot com>
  *	Alessandro Zummo <a.zummo@towertech.it>
  *
  * based on a lot of other RTC drivers.
@@ -215,12 +215,14 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
 			buf[i] |= 0x80;
 
 	/* this sequence is required to unlock the chip */
-	if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
+	xfer = i2c_master_send(client, wel, 3);
+	if (xfer != 3) {
 		dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
 		return -EIO;
 	}
 
-	if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
+	xfer = i2c_master_send(client, rwel, 3);
+	if (xfer != 3) {
 		dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
 		return -EIO;
 	}
@@ -269,7 +271,8 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
 	}
 
 	/* disable further writes */
-	if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
+	xfer = i2c_master_send(client, diswe, 3);
+	if (xfer != 3) {
 		dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
 		return -EIO;
 	}
@@ -375,8 +378,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim)
 	return 0;
 }
 
-struct x1205_limit
-{
+struct x1205_limit {
 	unsigned char reg, mask, min, max;
 };
 
@@ -430,7 +432,8 @@ static int x1205_validate_client(struct i2c_client *client)
 			},
 		};
 
-		if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+		if (xfer != 2) {
 			dev_err(&client->dev,
 				"%s: could not read register %x\n",
 				__func__, probe_zero_pattern[i]);
@@ -467,7 +470,8 @@ static int x1205_validate_client(struct i2c_client *client)
 			},
 		};
 
-		if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+		if (xfer != 2) {
 			dev_err(&client->dev,
 				"%s: could not read register %x\n",
 				__func__, probe_limits_pattern[i].reg);
@@ -548,10 +552,12 @@ static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	int err, dtrim, atrim;
 
-	if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
+	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
+	if (!err)
 		seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
 
-	if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0)
+	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
+	if (!err)
 		seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
 			atrim / 1000, atrim % 1000);
 	return 0;
@@ -639,7 +645,8 @@ static int x1205_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, rtc);
 
 	/* Check for power failures and eventually enable the osc */
-	if ((err = x1205_get_status(client, &sr)) == 0) {
+	err = x1205_get_status(client, &sr);
+	if (!err) {
 		if (sr & X1205_SR_RTCF) {
 			dev_err(&client->dev,
 				"power failure detected, "
@@ -647,9 +654,9 @@ static int x1205_probe(struct i2c_client *client,
 			udelay(50);
 			x1205_fix_osc(client);
 		}
-	}
-	else
+	} else {
 		dev_err(&client->dev, "couldn't read status\n");
+	}
 
 	err = x1205_sysfs_register(&client->dev);
 	if (err)