remoteproc: add IOMMU hardware capability flag

The remoteproc framework currently relies on iommu_present() on
the bus the device is on, to perform MMU management. However, this
logic doesn't scale for multi-arch, especially for processors that
do not have an IOMMU. Replace this logic instead by using a h/w
capability flag for the presence of IOMMU in the rproc structure.

This issue is seen on OMAP platforms when trying to add a remoteproc
driver for a small Cortex M3 called the WkupM3 used for suspend /
resume management on TI AM335/AM437x SoCs. This processor does not
have an MMU. Same is the case with another processor subsystem
PRU-ICSS on AM335/AM437x. All these are platform devices, and the
current iommu_present check will not scale for the same kernel image
to support OMAP4/OMAP5 and AM335/AM437x.

The existing platform implementation drivers - OMAP remoteproc, STE
Modem remoteproc and DA8xx remoteproc, are updated as well to properly
configure the newly added rproc field.

Cc: Robert Tivy <rtivy@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
[small change in the commit title and in a single comment]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>

1 files changed, 2 insertions, 13 deletions

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3cd85a6..11cdb11 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -94,19 +94,8 @@ static int rproc_enable_iommu(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	int ret;
 
-	/*
-	 * We currently use iommu_present() to decide if an IOMMU
-	 * setup is needed.
-	 *
-	 * This works for simple cases, but will easily fail with
-	 * platforms that do have an IOMMU, but not for this specific
-	 * rproc.
-	 *
-	 * This will be easily solved by introducing hw capabilities
-	 * that will be set by the remoteproc driver.
-	 */
-	if (!iommu_present(dev->bus)) {
-		dev_dbg(dev, "iommu not found\n");
+	if (!rproc->has_iommu) {
+		dev_dbg(dev, "iommu not present\n");
 		return 0;
 	}