regulator: Add QCOM SPMI regulator driver

Add an SPMI regulator driver for Qualcomm's PM8841, PM8941, and
PM8916 PMICs. This driver is based largely on code from
codeaurora.org[1].

[1] https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/regulator/qpnp-regulator.c?h=msm-3.10
Cc: David Collins <collinsd@codeaurora.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 1449 insertions, 0 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a6f116a..53b3e25 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -512,6 +512,17 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SPMI
+	tristate "Qualcomm SPMI regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators found in Qualcomm SPMI PMICs.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm SPMI PMICs as a module. The module will be named
+	  "qcom_spmi-regulator".
+
 config REGULATOR_RC5T583
 	tristate "RICOH RC5T583 Power regulators"
 	depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2c4da15..7152c97 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
new file mode 100644
index 0000000..162b865
--- /dev/null
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -0,0 +1,1437 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/ktime.h>
+#include <linux/regulator/driver.h>
+#include <linux/regmap.h>
+#include <linux/list.h>
+
+/* These types correspond to unique register layouts. */
+enum spmi_regulator_logical_type {
+	SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_VS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
+	SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
+};
+
+enum spmi_regulator_type {
+	SPMI_REGULATOR_TYPE_BUCK		= 0x03,
+	SPMI_REGULATOR_TYPE_LDO			= 0x04,
+	SPMI_REGULATOR_TYPE_VS			= 0x05,
+	SPMI_REGULATOR_TYPE_BOOST		= 0x1b,
+	SPMI_REGULATOR_TYPE_FTS			= 0x1c,
+	SPMI_REGULATOR_TYPE_BOOST_BYP		= 0x1f,
+	SPMI_REGULATOR_TYPE_ULT_LDO		= 0x21,
+	SPMI_REGULATOR_TYPE_ULT_BUCK		= 0x22,
+};
+
+enum spmi_regulator_subtype {
+	SPMI_REGULATOR_SUBTYPE_GP_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_RF_CTL		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_N50		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_N150		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_N300		= 0x03,
+	SPMI_REGULATOR_SUBTYPE_N600		= 0x04,
+	SPMI_REGULATOR_SUBTYPE_N1200		= 0x05,
+	SPMI_REGULATOR_SUBTYPE_N600_ST		= 0x06,
+	SPMI_REGULATOR_SUBTYPE_N1200_ST		= 0x07,
+	SPMI_REGULATOR_SUBTYPE_N900_ST		= 0x14,
+	SPMI_REGULATOR_SUBTYPE_N300_ST		= 0x15,
+	SPMI_REGULATOR_SUBTYPE_P50		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_P150		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_P300		= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_P600		= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_P1200		= 0x0c,
+	SPMI_REGULATOR_SUBTYPE_LN		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_LV_P50		= 0x28,
+	SPMI_REGULATOR_SUBTYPE_LV_P150		= 0x29,
+	SPMI_REGULATOR_SUBTYPE_LV_P300		= 0x2a,
+	SPMI_REGULATOR_SUBTYPE_LV_P600		= 0x2b,
+	SPMI_REGULATOR_SUBTYPE_LV_P1200		= 0x2c,
+	SPMI_REGULATOR_SUBTYPE_LV_P450		= 0x2d,
+	SPMI_REGULATOR_SUBTYPE_LV100		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_LV300		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_MV300		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_MV500		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_HDMI		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_OTG		= 0x11,
+	SPMI_REGULATOR_SUBTYPE_5V_BOOST		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_FTS_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL	= 0x09,
+	SPMI_REGULATOR_SUBTYPE_BB_2A		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1	= 0x0d,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2	= 0x0e,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3	= 0x0f,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
+};
+
+enum spmi_common_regulator_registers {
+	SPMI_COMMON_REG_DIG_MAJOR_REV		= 0x01,
+	SPMI_COMMON_REG_TYPE			= 0x04,
+	SPMI_COMMON_REG_SUBTYPE			= 0x05,
+	SPMI_COMMON_REG_VOLTAGE_RANGE		= 0x40,
+	SPMI_COMMON_REG_VOLTAGE_SET		= 0x41,
+	SPMI_COMMON_REG_MODE			= 0x45,
+	SPMI_COMMON_REG_ENABLE			= 0x46,
+	SPMI_COMMON_REG_PULL_DOWN		= 0x48,
+	SPMI_COMMON_REG_SOFT_START		= 0x4c,
+	SPMI_COMMON_REG_STEP_CTRL		= 0x61,
+};
+
+enum spmi_vs_registers {
+	SPMI_VS_REG_OCP				= 0x4a,
+	SPMI_VS_REG_SOFT_START			= 0x4c,
+};
+
+enum spmi_boost_registers {
+	SPMI_BOOST_REG_CURRENT_LIMIT		= 0x4a,
+};
+
+enum spmi_boost_byp_registers {
+	SPMI_BOOST_BYP_REG_CURRENT_LIMIT	= 0x4b,
+};
+
+/* Used for indexing into ctrl_reg.  These are offets from 0x40 */
+enum spmi_common_control_register_index {
+	SPMI_COMMON_IDX_VOLTAGE_RANGE		= 0,
+	SPMI_COMMON_IDX_VOLTAGE_SET		= 1,
+	SPMI_COMMON_IDX_MODE			= 5,
+	SPMI_COMMON_IDX_ENABLE			= 6,
+};
+
+/* Common regulator control register layout */
+#define SPMI_COMMON_ENABLE_MASK			0x80
+#define SPMI_COMMON_ENABLE			0x80
+#define SPMI_COMMON_DISABLE			0x00
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK	0x0f
+
+/* Common regulator mode register layout */
+#define SPMI_COMMON_MODE_HPM_MASK		0x80
+#define SPMI_COMMON_MODE_AUTO_MASK		0x40
+#define SPMI_COMMON_MODE_BYPASS_MASK		0x20
+#define SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK	0x10
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_MODE_FOLLOW_ALL_MASK	0x1f
+
+/* Common regulator pull down control register layout */
+#define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
+
+/* LDO regulator current limit control register layout */
+#define SPMI_LDO_CURRENT_LIMIT_ENABLE_MASK	0x80
+
+/* LDO regulator soft start control register layout */
+#define SPMI_LDO_SOFT_START_ENABLE_MASK		0x80
+
+/* VS regulator over current protection control register layout */
+#define SPMI_VS_OCP_OVERRIDE			0x01
+#define SPMI_VS_OCP_NO_OVERRIDE			0x00
+
+/* VS regulator soft start control register layout */
+#define SPMI_VS_SOFT_START_ENABLE_MASK		0x80
+#define SPMI_VS_SOFT_START_SEL_MASK		0x03
+
+/* Boost regulator current limit control register layout */
+#define SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK	0x80
+#define SPMI_BOOST_CURRENT_LIMIT_MASK		0x07
+
+#define SPMI_VS_OCP_DEFAULT_MAX_RETRIES		10
+#define SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS	30
+#define SPMI_VS_OCP_FALL_DELAY_US		90
+#define SPMI_VS_OCP_FAULT_DELAY_US		20000
+
+#define SPMI_FTSMPS_STEP_CTRL_STEP_MASK		0x18
+#define SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT	3
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK	0x07
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT	0
+
+/* Clock rate in kHz of the FTSMPS regulator reference clock. */
+#define SPMI_FTSMPS_CLOCK_RATE		19200
+
+/* Minimum voltage stepper delay for each step. */
+#define SPMI_FTSMPS_STEP_DELAY		8
+
+/*
+ * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
+ * adjust the step rate in order to account for oscillator variance.
+ */
+#define SPMI_FTSMPS_STEP_MARGIN_NUM	4
+#define SPMI_FTSMPS_STEP_MARGIN_DEN	5
+
+/*
+ * This voltage in uV is returned by get_voltage functions when there is no way
+ * to determine the current voltage level.  It is needed because the regulator
+ * framework treats a 0 uV voltage as an error.
+ */
+#define VOLTAGE_UNKNOWN 1
+
+/* VSET value to decide the range of ULT SMPS */
+#define ULT_SMPS_RANGE_SPLIT 0x60
+
+/**
+ * struct spmi_voltage_range - regulator set point voltage mapping description
+ * @min_uV:		Minimum programmable output voltage resulting from
+ *			set point register value 0x00
+ * @max_uV:		Maximum programmable output voltage
+ * @step_uV:		Output voltage increase resulting from the set point
+ *			register value increasing by 1
+ * @set_point_min_uV:	Minimum allowed voltage
+ * @set_point_max_uV:	Maximum allowed voltage.  This may be tweaked in order
+ *			to pick which range should be used in the case of
+ *			overlapping set points.
+ * @n_voltages:		Number of preferred voltage set points present in this
+ *			range
+ * @range_sel:		Voltage range register value corresponding to this range
+ *
+ * The following relationships must be true for the values used in this struct:
+ * (max_uV - min_uV) % step_uV == 0
+ * (set_point_min_uV - min_uV) % step_uV == 0*
+ * (set_point_max_uV - min_uV) % step_uV == 0*
+ * n_voltages = (set_point_max_uV - set_point_min_uV) / step_uV + 1
+ *
+ * *Note, set_point_min_uV == set_point_max_uV == 0 is allowed in order to
+ * specify that the voltage range has meaning, but is not preferred.
+ */
+struct spmi_voltage_range {
+	int					min_uV;
+	int					max_uV;
+	int					step_uV;
+	int					set_point_min_uV;
+	int					set_point_max_uV;
+	unsigned				n_voltages;
+	u8					range_sel;
+};
+
+/*
+ * The ranges specified in the spmi_voltage_set_points struct must be listed
+ * so that range[i].set_point_max_uV < range[i+1].set_point_min_uV.
+ */
+struct spmi_voltage_set_points {
+	struct spmi_voltage_range		*range;
+	int					count;
+	unsigned				n_voltages;
+};
+
+struct spmi_regulator {
+	struct regulator_desc			desc;
+	struct device				*dev;
+	struct delayed_work			ocp_work;
+	struct regmap				*regmap;
+	struct spmi_voltage_set_points		*set_points;
+	enum spmi_regulator_logical_type	logical_type;
+	int					ocp_irq;
+	int					ocp_count;
+	int					ocp_max_retries;
+	int					ocp_retry_delay_ms;
+	int					hpm_min_load;
+	int					slew_rate;
+	ktime_t					vs_enable_time;
+	u16					base;
+	struct list_head			node;
+};
+
+struct spmi_regulator_mapping {
+	enum spmi_regulator_type		type;
+	enum spmi_regulator_subtype		subtype;
+	enum spmi_regulator_logical_type	logical_type;
+	u32					revision_min;
+	u32					revision_max;
+	struct regulator_ops			*ops;
+	struct spmi_voltage_set_points		*set_points;
+	int					hpm_min_load;
+};
+
+struct spmi_regulator_data {
+	const char			*name;
+	u16				base;
+	const char			*supply;
+	const char			*ocp;
+	u16				force_type;
+};
+
+#define SPMI_VREG(_type, _subtype, _dig_major_min, _dig_major_max, \
+		      _logical_type, _ops_val, _set_points_val, _hpm_min_load) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_##_type, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_##_logical_type, \
+		.ops		= &spmi_##_ops_val##_ops, \
+		.set_points	= &_set_points_val##_set_points, \
+		.hpm_min_load	= _hpm_min_load, \
+	}
+
+#define SPMI_VREG_VS(_subtype, _dig_major_min, _dig_major_max) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_VS, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_VS, \
+		.ops		= &spmi_vs_ops, \
+	}
+
+#define SPMI_VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, \
+			_set_point_max_uV, _max_uV, _step_uV) \
+	{ \
+		.min_uV			= _min_uV, \
+		.max_uV			= _max_uV, \
+		.set_point_min_uV	= _set_point_min_uV, \
+		.set_point_max_uV	= _set_point_max_uV, \
+		.step_uV		= _step_uV, \
+		.range_sel		= _range_sel, \
+	}
+
+#define DEFINE_SPMI_SET_POINTS(name) \
+struct spmi_voltage_set_points name##_set_points = { \
+	.range	= name##_ranges, \
+	.count	= ARRAY_SIZE(name##_ranges), \
+}
+
+/*
+ * These tables contain the physically available PMIC regulator voltage setpoint
+ * ranges.  Where two ranges overlap in hardware, one of the ranges is trimmed
+ * to ensure that the setpoints available to software are monotonically
+ * increasing and unique.  The set_voltage callback functions expect these
+ * properties to hold.
+ */
+static struct spmi_voltage_range pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 3075000, 25000),
+	SPMI_VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 4900000, 50000),
+};
+
+static struct spmi_voltage_range nldo1_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo2_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,  375000,  768750,  768750,  6250),
+	SPMI_VOLTAGE_RANGE(2,  750000,  775000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo3_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(2,  750000,       0,       0, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ln_ldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(1,  690000,  690000, 1110000, 1110000, 60000),
+	SPMI_VOLTAGE_RANGE(0, 1380000, 1380000, 2220000, 2220000, 120000),
+};
+
+static struct spmi_voltage_range smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 3125000, 25000),
+};
+
+static struct spmi_voltage_range ftsmps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,       0,  350000, 1275000, 1275000,  5000),
+	SPMI_VOLTAGE_RANGE(1,       0, 1280000, 2040000, 2040000, 10000),
+};
+
+static struct spmi_voltage_range ftsmps2p5_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,   80000,  350000, 1355000, 1355000,  5000),
+	SPMI_VOLTAGE_RANGE(1,  160000, 1360000, 2200000, 2200000, 10000),
+};
+
+static struct spmi_voltage_range boost_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
+};
+
+static struct spmi_voltage_range boost_byp_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 2500000, 2500000, 5200000, 5650000, 50000),
+};
+
+static struct spmi_voltage_range ult_lo_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  750000,       0,       0, 1525000, 25000),
+};
+
+static struct spmi_voltage_range ult_ho_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1550000, 1550000, 2325000, 2325000, 25000),
+};
+
+static struct spmi_voltage_range ult_nldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ult_pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
+};
+
+static DEFINE_SPMI_SET_POINTS(pldo);
+static DEFINE_SPMI_SET_POINTS(nldo1);
+static DEFINE_SPMI_SET_POINTS(nldo2);
+static DEFINE_SPMI_SET_POINTS(nldo3);
+static DEFINE_SPMI_SET_POINTS(ln_ldo);
+static DEFINE_SPMI_SET_POINTS(smps);
+static DEFINE_SPMI_SET_POINTS(ftsmps);
+static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
+static DEFINE_SPMI_SET_POINTS(boost);
+static DEFINE_SPMI_SET_POINTS(boost_byp);
+static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
+static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
+static DEFINE_SPMI_SET_POINTS(ult_nldo);
+static DEFINE_SPMI_SET_POINTS(ult_pldo);
+
+static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
+				 int len)
+{
+	return regmap_bulk_read(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static inline int spmi_vreg_write(struct spmi_regulator *vreg, u16 addr,
+				u8 *buf, int len)
+{
+	return regmap_bulk_write(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
+		u8 mask)
+{
+	return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
+}
+
+static int spmi_regulator_common_is_enabled(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_ENABLE, &reg, 1);
+
+	return (reg & SPMI_COMMON_ENABLE_MASK) == SPMI_COMMON_ENABLE;
+}
+
+static int spmi_regulator_common_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	if (vreg->ocp_irq) {
+		vreg->ocp_count = 0;
+		vreg->vs_enable_time = ktime_get();
+	}
+
+	return spmi_regulator_common_enable(rdev);
+}
+
+static int spmi_regulator_common_disable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
+
+	/* Check if request voltage is outside of physically settable range. */
+	lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
+	lim_max_uV =
+	  vreg->set_points->range[vreg->set_points->count - 1].set_point_max_uV;
+
+	if (uV < lim_min_uV && max_uV >= lim_min_uV)
+		uV = lim_min_uV;
+
+	if (uV < lim_min_uV || uV > lim_max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] is outside possible v=[%d, %d]\n",
+			 min_uV, max_uV, lim_min_uV, lim_max_uV);
+		return -EINVAL;
+	}
+
+	/* Find the range which uV is inside of. */
+	for (i = vreg->set_points->count - 1; i > 0; i--) {
+		range_max_uV = vreg->set_points->range[i - 1].set_point_max_uV;
+		if (uV > range_max_uV && range_max_uV > 0)
+			break;
+	}
+
+	range_id = i;
+	range = &vreg->set_points->range[range_id];
+	*range_sel = range->range_sel;
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = (uV - range->min_uV + range->step_uV - 1)
+			/ range->step_uV;
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] cannot be met by any set point; "
+			"next set point: %d\n",
+			min_uV, max_uV, uV);
+		return -EINVAL;
+	}
+
+	*selector = 0;
+	for (i = 0; i < range_id; i++)
+		*selector += vreg->set_points->range[i].n_voltages;
+	*selector += (uV - range->set_point_min_uV) / range->step_uV;
+
+	return 0;
+}
+
+static const struct spmi_voltage_range *
+spmi_regulator_find_range(struct spmi_regulator *vreg)
+{
+	u8 range_sel;
+	const struct spmi_voltage_range *range, *end;
+
+	range = vreg->set_points->range;
+	end = range + vreg->set_points->count;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
+
+	for (; range < end; range++)
+		if (range->range_sel == range_sel)
+			return range;
+
+	return NULL;
+}
+
+static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int i;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		goto different_range;
+
+	if (uV < range->min_uV && max_uV >= range->min_uV)
+		uV = range->min_uV;
+
+	if (uV < range->min_uV || uV > range->max_uV) {
+		/* Current range doesn't support the requested voltage. */
+		goto different_range;
+	}
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		/*
+		 * No set point in the current voltage range is within the
+		 * requested min_uV to max_uV range.
+		 */
+		goto different_range;
+	}
+
+	*selector = 0;
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (uV >= vreg->set_points->range[i].set_point_min_uV
+		    && uV <= vreg->set_points->range[i].set_point_max_uV)
+			*selector +=
+			    (uV - vreg->set_points->range[i].set_point_min_uV)
+				/ vreg->set_points->range[i].step_uV;
+			break;
+
+		*selector += vreg->set_points->range[i].n_voltages;
+	}
+
+	if (*selector >= vreg->set_points->n_voltages)
+		goto different_range;
+
+	return 0;
+
+different_range:
+	return spmi_regulator_select_voltage(vreg, min_uV, max_uV,
+			range_sel, voltage_sel, selector);
+}
+
+static int spmi_regulator_common_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 buf[2];
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible.  This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	buf[0] = range_sel;
+	buf[1] = voltage_sel;
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
+}
+
+static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+		unsigned int old_selector, unsigned int new_selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	int diff_uV;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	diff_uV = abs(new_selector - old_selector) * range->step_uV;
+
+	return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
+}
+
+static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, sel;
+
+	ret = spmi_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel,
+		&sel, selector);
+	if (ret) {
+		dev_err(vreg->dev, "could not set voltage, ret=%d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Certain types of regulators do not have a range select register so
+	 * only voltage set register needs to be written.
+	 */
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &sel, 1);
+}
+
+static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range = vreg->set_points->range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible. This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	/*
+	 * Calculate VSET based on range
+	 * In case of range 0: voltage_sel is a 7 bit value, can be written
+	 *			witout any modification.
+	 * In case of range 1: voltage_sel is a 5 bit value, bits[7-5] set to
+	 *			[011].
+	 */
+	if (range_sel == 1)
+		voltage_sel |= ULT_SMPS_RANGE_SPLIT;
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
+	       voltage_sel, 0xff);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	if (range->range_sel == 1)
+		voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
+			unsigned selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int uV = 0;
+	int i;
+
+	if (selector >= vreg->set_points->n_voltages)
+		return 0;
+
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (selector < vreg->set_points->range[i].n_voltages)
+			uV = selector * vreg->set_points->range[i].step_uV
+				+ vreg->set_points->range[i].set_point_min_uV;
+			break;
+
+		selector -= vreg->set_points->range[i].n_voltages;
+	}
+
+	return uV;
+}
+
+static int
+spmi_regulator_common_set_bypass(struct regulator_dev *rdev, bool enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_BYPASS_MASK;
+	u8 val = 0;
+
+	if (enable)
+		val = mask;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_get_bypass(struct regulator_dev *rdev, bool *enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 val;
+	int ret;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &val, 1);
+	*enable = val & SPMI_COMMON_MODE_BYPASS_MASK;
+
+	return ret;
+}
+
+static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	if (reg & SPMI_COMMON_MODE_HPM_MASK)
+		return REGULATOR_MODE_NORMAL;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int
+spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_HPM_MASK;
+	u8 val = 0;
+
+	if (mode == REGULATOR_MODE_NORMAL)
+		val = mask;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mode;
+
+	if (load_uA >= vreg->hpm_min_load)
+		mode = REGULATOR_MODE_NORMAL;
+	else
+		mode = REGULATOR_MODE_IDLE;
+
+	return spmi_regulator_common_set_mode(rdev, mode);
+}
+
+static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_PULL_DOWN,
+				     mask, mask);
+}
+
+static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_LDO_SOFT_START_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_SOFT_START,
+				     mask, mask);
+}
+
+static int spmi_regulator_set_ilim(struct regulator_dev *rdev, int ilim_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	enum spmi_regulator_logical_type type = vreg->logical_type;
+	unsigned int current_reg;
+	u8 reg;
+	u8 mask = SPMI_BOOST_CURRENT_LIMIT_MASK |
+		  SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+	int max = (SPMI_BOOST_CURRENT_LIMIT_MASK + 1) * 500;
+
+	if (type == SPMI_REGULATOR_LOGICAL_TYPE_BOOST)
+		current_reg = SPMI_BOOST_REG_CURRENT_LIMIT;
+	else
+		current_reg = SPMI_BOOST_BYP_REG_CURRENT_LIMIT;
+
+	if (ilim_uA > max || ilim_uA <= 0)
+		return -EINVAL;
+
+	reg = (ilim_uA - 1) / 500;
+	reg |= SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, current_reg, reg, mask);
+}
+
+static int spmi_regulator_vs_clear_ocp(struct spmi_regulator *vreg)
+{
+	int ret;
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+
+	vreg->vs_enable_time = ktime_get();
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+
+	return ret;
+}
+
+static void spmi_regulator_vs_ocp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct spmi_regulator *vreg
+		= container_of(dwork, struct spmi_regulator, ocp_work);
+
+	spmi_regulator_vs_clear_ocp(vreg);
+}
+
+static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
+{
+	struct spmi_regulator *vreg = data;
+	ktime_t ocp_irq_time;
+	s64 ocp_trigger_delay_us;
+
+	ocp_irq_time = ktime_get();
+	ocp_trigger_delay_us = ktime_us_delta(ocp_irq_time,
+						vreg->vs_enable_time);
+
+	/*
+	 * Reset the OCP count if there is a large delay between switch enable
+	 * and when OCP triggers.  This is indicative of a hotplug event as
+	 * opposed to a fault.
+	 */
+	if (ocp_trigger_delay_us > SPMI_VS_OCP_FAULT_DELAY_US)
+		vreg->ocp_count = 0;
+
+	/* Wait for switch output to settle back to 0 V after OCP triggered. */
+	udelay(SPMI_VS_OCP_FALL_DELAY_US);
+
+	vreg->ocp_count++;
+
+	if (vreg->ocp_count == 1) {
+		/* Immediately clear the over current condition. */
+		spmi_regulator_vs_clear_ocp(vreg);
+	} else if (vreg->ocp_count <= vreg->ocp_max_retries) {
+		/* Schedule the over current clear task to run later. */
+		schedule_delayed_work(&vreg->ocp_work,
+			msecs_to_jiffies(vreg->ocp_retry_delay_ms) + 1);
+	} else {
+		dev_err(vreg->dev,
+			"OCP triggered %d times; no further retries\n",
+			vreg->ocp_count);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct regulator_ops spmi_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+static struct regulator_ops spmi_ln_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+};
+
+static struct regulator_ops spmi_vs_ops = {
+	.enable			= spmi_regulator_vs_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+static struct regulator_ops spmi_boost_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_input_current_limit = spmi_regulator_set_ilim,
+};
+
+static struct regulator_ops spmi_ftsmps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_lo_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_ult_lo_smps_set_voltage,
+	.get_voltage		= spmi_regulator_ult_lo_smps_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ho_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+/* Maximum possible digital major revision value */
+#define INF 0xFF
+
+static const struct spmi_regulator_mapping supported_regulators[] = {
+	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
+	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
+	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
+	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600,     1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200,    1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N600_ST,  0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600_ST,  1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   P50,      0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   P150,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P300,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P600,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P1200,    0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LN,       0, INF, LN_LDO, ln_ldo, ln_ldo,      0),
+	SPMI_VREG(LDO,   LV_P50,   0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   LV_P150,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P300,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P600,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P1200, 0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG_VS(LV100,        0, INF),
+	SPMI_VREG_VS(LV300,        0, INF),
+	SPMI_VREG_VS(MV300,        0, INF),
+	SPMI_VREG_VS(MV500,        0, INF),
+	SPMI_VREG_VS(HDMI,         0, INF),
+	SPMI_VREG_VS(OTG,          0, INF),
+	SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST,  boost,  boost,       0),
+	SPMI_VREG(FTS,   FTS_CTL,  0, INF, FTSMPS, ftsmps, ftsmps, 100000),
+	SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
+	SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL2, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL3, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL4, 0, INF, ULT_HO_SMPS, ult_ho_smps,
+						ult_ho_smps,   100000),
+	SPMI_VREG(ULT_LDO, N300_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P150,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P300,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P450,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P600,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+};
+
+static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
+{
+	unsigned int n;
+	struct spmi_voltage_range *range = points->range;
+
+	for (; range < points->range + points->count; range++) {
+		n = 0;
+		if (range->set_point_max_uV) {
+			n = range->set_point_max_uV - range->set_point_min_uV;
+			n /= range->step_uV + 1;
+		}
+		range->n_voltages = n;
+		points->n_voltages += n;
+	}
+}
+
+static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
+{
+	const struct spmi_regulator_mapping *mapping;
+	int ret, i;
+	u32 dig_major_rev;
+	u8 version[SPMI_COMMON_REG_SUBTYPE - SPMI_COMMON_REG_DIG_MAJOR_REV + 1];
+	u8 type, subtype;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
+		ARRAY_SIZE(version));
+	if (ret) {
+		dev_err(vreg->dev, "could not read version registers\n");
+		return ret;
+	}
+	dig_major_rev	= version[SPMI_COMMON_REG_DIG_MAJOR_REV
+					- SPMI_COMMON_REG_DIG_MAJOR_REV];
+	if (!force_type) {
+		type		= version[SPMI_COMMON_REG_TYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+		subtype		= version[SPMI_COMMON_REG_SUBTYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+	} else {
+		type = force_type >> 8;
+		subtype = force_type;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		mapping = &supported_regulators[i];
+		if (mapping->type == type && mapping->subtype == subtype
+		    && mapping->revision_min <= dig_major_rev
+		    && mapping->revision_max >= dig_major_rev)
+			goto found;
+	}
+
+	dev_err(vreg->dev,
+		"unsupported regulator: name=%s type=0x%02X, subtype=0x%02X, dig major rev=0x%02X\n",
+		vreg->desc.name, type, subtype, dig_major_rev);
+
+	return -ENODEV;
+
+found:
+	vreg->logical_type	= mapping->logical_type;
+	vreg->set_points	= mapping->set_points;
+	vreg->hpm_min_load	= mapping->hpm_min_load;
+	vreg->desc.ops		= mapping->ops;
+
+	if (mapping->set_points) {
+		if (!mapping->set_points->n_voltages)
+			spmi_calculate_num_voltages(mapping->set_points);
+		vreg->desc.n_voltages = mapping->set_points->n_voltages;
+	}
+
+	return 0;
+}
+
+static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int step, delay, slew_rate;
+	const struct spmi_voltage_range *range;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
+	step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
+
+	delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
+
+	/* slew_rate has units of uV/us */
+	slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
+	slew_rate /= 1000 * (SPMI_FTSMPS_STEP_DELAY << delay);
+	slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
+	slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
+
+	/* Ensure that the slew rate is greater than 0 */
+	vreg->slew_rate = max(slew_rate, 1);
+
+	return ret;
+}
+
+static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
+{
+	if (mode)
+		return REGULATOR_MODE_NORMAL;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int spmi_regulator_of_parse(struct device_node *node,
+			    const struct regulator_desc *desc,
+			    struct regulator_config *config)
+{
+	struct spmi_regulator *vreg = config->driver_data;
+	struct device *dev = config->dev;
+	int ret;
+
+	vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
+	vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
+
+	if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
+		ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
+		if (ret)
+			return ret;
+	}
+
+	if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
+		vreg->ocp_irq = 0;
+
+	if (vreg->ocp_irq) {
+		ret = devm_request_irq(dev, vreg->ocp_irq,
+			spmi_regulator_vs_ocp_isr, IRQF_TRIGGER_RISING, "ocp",
+			vreg);
+		if (ret < 0) {
+			dev_err(dev, "failed to request irq %d, ret=%d\n",
+				vreg->ocp_irq, ret);
+			return ret;
+		}
+
+		INIT_DELAYED_WORK(&vreg->ocp_work, spmi_regulator_vs_ocp_work);
+	}
+
+	return 0;
+}
+
+static const struct spmi_regulator_data pm8941_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l11", },
+	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
+	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
+	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
+	{ "l11", 0x4a00, "vdd_l4_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
+	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
+	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
+	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
+	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
+	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
+	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
+	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
+	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
+	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
+	{ "mvs1", 0x8300, "vin_5vs", },
+	{ "mvs2", 0x8400, "vin_5vs", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8841_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", NULL, 0x1c08 },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", NULL, 0x1c08 },
+	{ "s5", 0x2000, "vdd_s5", NULL, 0x1c08 },
+	{ "s6", 0x2300, "vdd_s6", NULL, 0x1c08 },
+	{ "s7", 0x2600, "vdd_s7", NULL, 0x1c08 },
+	{ "s8", 0x2900, "vdd_s8", NULL, 0x1c08 },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8916_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l5_l6", },
+	{ "l5", 0x4400, "vdd_l4_l5_l6", },
+	{ "l6", 0x4500, "vdd_l4_l5_l6", },
+	{ "l7", 0x4600, "vdd_l7", },
+	{ "l8", 0x4700, "vdd_l8_l11_l14_l15_l16", },
+	{ "l9", 0x4800, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l10", 0x4900, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l11", 0x4a00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l12", 0x4b00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l13", 0x4c00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l14", 0x4d00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l15", 0x4e00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l16", 0x4f00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l17", 0x5000, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l18", 0x5100, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ }
+};
+
+static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
+	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
+	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
+
+static int qcom_spmi_regulator_probe(struct platform_device *pdev)
+{
+	const struct spmi_regulator_data *reg;
+	const struct of_device_id *match;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct spmi_regulator *vreg;
+	struct regmap *regmap;
+	const char *name;
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct list_head *vreg_list;
+
+	vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL);
+	if (!vreg_list)
+		return -ENOMEM;
+	INIT_LIST_HEAD(vreg_list);
+	platform_set_drvdata(pdev, vreg_list);
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	match = of_match_device(qcom_spmi_regulator_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	for (reg = match->data; reg->name; reg++) {
+		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->dev = dev;
+		vreg->base = reg->base;
+		vreg->regmap = regmap;
+
+		if (reg->ocp) {
+			vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp);
+			if (vreg->ocp_irq < 0) {
+				ret = vreg->ocp_irq;
+				goto err;
+			}
+		}
+
+		vreg->desc.id = -1;
+		vreg->desc.owner = THIS_MODULE;
+		vreg->desc.type = REGULATOR_VOLTAGE;
+		vreg->desc.name = name = reg->name;
+		vreg->desc.supply_name = reg->supply;
+		vreg->desc.of_match = reg->name;
+		vreg->desc.of_parse_cb = spmi_regulator_of_parse;
+		vreg->desc.of_map_mode = spmi_regulator_of_map_mode;
+
+		ret = spmi_regulator_match(vreg, reg->force_type);
+		if (ret)
+			goto err;
+
+		config.dev = dev;
+		config.driver_data = vreg;
+		rdev = devm_regulator_register(dev, &vreg->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "failed to register %s\n", name);
+			ret = PTR_ERR(rdev);
+			goto err;
+		}
+
+		INIT_LIST_HEAD(&vreg->node);
+		list_add(&vreg->node, vreg_list);
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+	return ret;
+}
+
+static int qcom_spmi_regulator_remove(struct platform_device *pdev)
+{
+	struct spmi_regulator *vreg;
+	struct list_head *vreg_list = platform_get_drvdata(pdev);
+
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+
+	return 0;
+}
+
+static struct platform_driver qcom_spmi_regulator_driver = {
+	.driver		= {
+		.name	= "qcom-spmi-regulator",
+		.of_match_table = qcom_spmi_regulator_match,
+	},
+	.probe		= qcom_spmi_regulator_probe,
+	.remove		= qcom_spmi_regulator_remove,
+};
+module_platform_driver(qcom_spmi_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-spmi-regulator");