summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2011-05-08 22:13:37 +0100
committerLiam Girdwood <lrg@slimlogic.co.uk>2011-05-27 10:34:37 +0100
commitbf5892a8167e4aa5a9a6d72f803fde850e0c5753 (patch)
tree41670ff93a8441ce155ba99cbfb684e5c52df4e7 /drivers/regulator
parent492c826b9facefa84995f4dea917e301b5ee0884 (diff)
downloadop-kernel-dev-bf5892a8167e4aa5a9a6d72f803fde850e0c5753.zip
op-kernel-dev-bf5892a8167e4aa5a9a6d72f803fde850e0c5753.tar.gz
regulator: Support voltage offsets to compensate for drops in system
Some systems, particularly physically large systems used for early prototyping, may experience substantial voltage drops between the regulator and the consumers as a result of long traces in the system. With these systems voltages may need to be set higher than requested in order to ensure reliable system operation. Allow systems to work around such hardware issues by allowing constraints to supply an offset to be applied to any requested and reported voltages. This is not ideal, especially since the voltage drop may be load dependant, but is sufficient for most affected systems, it is not expected to be used in production hardware. The offset is applied after all constraint processing so constraints should be specified in terms of consumer values not physically configured values. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/core.c15
1 files changed, 12 insertions, 3 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 432faa5..58452ac 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -724,6 +724,10 @@ static void print_constraints(struct regulator_dev *rdev)
count += sprintf(buf + count, "at %d mV ", ret / 1000);
}
+ if (constraints->uV_offset)
+ count += sprintf(buf, "%dmV offset ",
+ constraints->uV_offset / 1000);
+
if (constraints->min_uA && constraints->max_uA) {
if (constraints->min_uA == constraints->max_uA)
count += sprintf(buf + count, "%d mA ",
@@ -1641,6 +1645,9 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
+ min_uV += rdev->constraints->uV_offset;
+ max_uV += rdev->constraints->uV_offset;
+
if (rdev->desc->ops->set_voltage) {
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
&selector);
@@ -1865,18 +1872,20 @@ EXPORT_SYMBOL_GPL(regulator_sync_voltage);
static int _regulator_get_voltage(struct regulator_dev *rdev)
{
- int sel;
+ int sel, ret;
if (rdev->desc->ops->get_voltage_sel) {
sel = rdev->desc->ops->get_voltage_sel(rdev);
if (sel < 0)
return sel;
- return rdev->desc->ops->list_voltage(rdev, sel);
+ ret = rdev->desc->ops->list_voltage(rdev, sel);
}
if (rdev->desc->ops->get_voltage)
- return rdev->desc->ops->get_voltage(rdev);
+ ret = rdev->desc->ops->get_voltage(rdev);
else
return -EINVAL;
+
+ return ret - rdev->constraints->uV_offset;
}
/**
OpenPOWER on IntegriCloud