diff options
author | Rafael J. Wysocki <rjw@sisk.pl> | 2011-12-21 09:51:23 +0100 |
---|---|---|
committer | Rafael J. Wysocki <rjw@sisk.pl> | 2011-12-21 09:51:23 +0100 |
commit | dfa9d178cd28caf5d76bc4f37f4b3e7e8df8e697 (patch) | |
tree | d97ca7790d8a622cba9fdd19832decdb0aa6418a /drivers/regulator/twl-regulator.c | |
parent | 3f19f08a7ec74cfc50fbad3c5e615760afbd23a0 (diff) | |
parent | 7b4050381127ae11fcfc74a106d715a5fbbf888a (diff) | |
download | op-kernel-dev-dfa9d178cd28caf5d76bc4f37f4b3e7e8df8e697.zip op-kernel-dev-dfa9d178cd28caf5d76bc4f37f4b3e7e8df8e697.tar.gz |
Merge branch 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung into pm-devfreq
* 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung: (765 commits)
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
pci: Fix hotplug of Express Module with pci bridges
i2c-eg20t: correct the driver init order of pch_i2c_probe()
I2C: OMAP: fix FIFO usage for OMAP4
i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio
i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle
Linux 3.2-rc6
Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"
btrfs: lower the dirty balance poll interval
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
drm/i915: enable semaphores on per-device defaults
drm/i915: don't set unpin_work if vblank_get fails
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
iommu: Export intel_iommu_enabled to signal when iommu is in use
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
drm/i915: prevent division by zero when asking for chipset power
drm/i915: add PCH info to i915_capabilities
drm/i915: set the right SDVO transcoder for CPT
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
...
Diffstat (limited to 'drivers/regulator/twl-regulator.c')
-rw-r--r-- | drivers/regulator/twl-regulator.c | 46 |
1 files changed, 44 insertions, 2 deletions
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index ee8747f..11cc308 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -71,6 +71,7 @@ struct twlreg_info { #define VREG_TYPE 1 #define VREG_REMAP 2 #define VREG_DEDICATED 3 /* LDO control */ +#define VREG_VOLTAGE_SMPS_4030 9 /* TWL6030 register offsets */ #define VREG_TRANS 1 #define VREG_STATE 2 @@ -514,6 +515,32 @@ static struct regulator_ops twl4030ldo_ops = { .get_status = twl4030reg_get_status, }; +static int +twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, + vsel); + return 0; +} + +static int twl4030smps_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, + VREG_VOLTAGE_SMPS_4030); + + return vsel * 12500 + 600000; +} + +static struct regulator_ops twl4030smps_ops = { + .set_voltage = twl4030smps_set_voltage, + .get_voltage = twl4030smps_get_voltage, +}; + static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -856,6 +883,21 @@ static struct regulator_ops twlsmps_ops = { }, \ } +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ + { \ + .base = offset, \ + .id = num, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .ops = &twl4030smps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \ .base = offset, \ .min_mV = min_mVolts, \ @@ -947,8 +989,8 @@ static struct twlreg_info twl_regs[] = { TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08), TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), |