Merge tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot of core work this time around, though not 100% successful.

  We gained support for runtime mode changes thanks to David Collins and
  improved support for write only regulators (ones where we can't read
  back the configuration) from Douglas Anderson.

  There's been quite a bit of work from Linus Walleij on converting from
  specfying GPIOs by numbers to descriptors. Sadly the testing turned
  out to be less good than we had hoped and so a lot of this had to be
  reverted.

  We also have the start of updates to use coupled regulators from
  Maciej Purski, unfortunately there are further problems there so the
  last couple of patches have been reverted.

  We also have new drivers for BD71837 and SY8106A devices, SAW
  regulators on Qualcomm SPMI and dropped support for some preproduction
  chips that never made it to market from the AB8500 driver"

* tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (57 commits)
  regulator: gpio: Revert
  ARM: pxa, regulator: fix building ezx e680
  regulator: Revert coupled regulator support again
  regulator: wm8994: Fix shared GPIOs
  regulator: max77686: Fix shared GPIOs
  regulator: bd71837: BD71837 PMIC regulator driver
  regulator: bd71837: Devicetree bindings for BD71837 regulators
  regulator: gpio: Get enable GPIO using GPIO descriptor
  regulator: fixed: Convert to use GPIO descriptor only
  regulator: s2mps11: Fix boot on Odroid XU3
  dt-bindings: qcom_spmi: Document SAW support
  regulator: qcom_spmi: Add support for SAW
  regulator: tps65090: Pass descriptor instead of GPIO number
  regulator: s5m8767: Pass descriptor instead of GPIO number
  regulator: pfuze100: Delete reference to ena_gpio
  regulator: max8952: Pass descriptor instead of GPIO number
  regulator: lp8788-ldo: Pass descriptor instead of GPIO number
  regulator: lm363x: Pass descriptor instead of GPIO number
  regulator: max8973: Pass descriptor instead of GPIO number
  regulator: mc13xxx-core: Switch to SPDX identifier
  ...

1 files changed, 21 insertions, 19 deletions

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 63922a2..8d9dbcc 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -1,20 +1,7 @@
-/*
- * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -86,6 +73,13 @@ static const int pfuze100_coin[] = {
 	2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
 };
 
+static const int pfuze3000_sw1a[] = {
+	700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000,
+	900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000,
+	1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000,
+	1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000,
+};
+
 static const int pfuze3000_sw2lo[] = {
 	1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000,
 };
@@ -148,6 +142,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 };
 
 static const struct regulator_ops pfuze100_sw_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -158,6 +155,7 @@ static const struct regulator_ops pfuze100_sw_regulator_ops = {
 static const struct regulator_ops pfuze100_swb_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -193,6 +191,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 			.uV_step = (step),	\
 			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
 			.vsel_mask = 0x3f,	\
+			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
+			.enable_val = 0xc,	\
+			.disable_val = 0x0,	\
+			.enable_mask = 0xf,	\
+			.enable_time = 500,	\
 		},	\
 		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
 		.stby_mask = 0x3f,	\
@@ -343,7 +346,7 @@ static struct pfuze_regulator pfuze200_regulators[] = {
 };
 
 static struct pfuze_regulator pfuze3000_regulators[] = {
-	PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000),
+	PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
 	PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
 	PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
 	PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
@@ -648,7 +651,6 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		config.init_data = init_data;
 		config.driver_data = pfuze_chip;
 		config.of_node = match_of_node(i);
-		config.ena_gpio = -EINVAL;
 
 		pfuze_chip->regulators[i] =
 			devm_regulator_register(&client->dev, desc, &config);