diff options
author | Mika Båtsman <mbatsman@mvista.com> | 2016-06-17 13:31:37 +0300 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2016-06-17 11:40:20 +0100 |
commit | 8a092e682f20f193f2070dba2ea1904e95814126 (patch) | |
tree | 59c156578219d2eaace521bc3b5f9c747d7fc039 /drivers/regulator/anatop-regulator.c | |
parent | 1a695a905c18548062509178b98bc91e67510864 (diff) | |
download | op-kernel-dev-8a092e682f20f193f2070dba2ea1904e95814126.zip op-kernel-dev-8a092e682f20f193f2070dba2ea1904e95814126.tar.gz |
regulator: anatop: allow regulator to be in bypass mode
Bypass support was added in commit d38018f2019c ("regulator: anatop: Add
bypass support to digital LDOs"). A check for valid voltage selectors was
added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage
selector") but it also discards all regulators that are in bypass mode. Add
check for the bypass setting. Errors below were seen on a Variscite mx6
board.
anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22
anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22
Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector")
Signed-off-by: Mika Båtsman <mbatsman@mvista.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/anatop-regulator.c')
-rw-r--r-- | drivers/regulator/anatop-regulator.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 63cd5e6..3a6d029 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; - if (!sreg->sel) { + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; } |