diff options
author | Lee Jones <lee.jones@linaro.org> | 2013-04-02 13:24:12 +0100 |
---|---|---|
committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2013-04-02 23:01:43 +0100 |
commit | 3fe52289105823867226355e8e957119af50e3a1 (patch) | |
tree | 04b2695466351dde5e2689c156988ee686810029 /drivers/regulator/ab8500.c | |
parent | d7607baf32160a64a2610552868d348b6644b5ef (diff) | |
download | op-kernel-dev-3fe52289105823867226355e8e957119af50e3a1.zip op-kernel-dev-3fe52289105823867226355e8e957119af50e3a1.tar.gz |
regulator: ab8500: Add mode operation for v-amic
v-amic1 and v-amic2 regulators have dedicated mode registers
and share the same mode bit. This patch adds special handling
for those regulators.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/regulator/ab8500.c')
-rw-r--r-- | drivers/regulator/ab8500.c | 193 |
1 files changed, 161 insertions, 32 deletions
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 6dae5df..ac89439 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -30,10 +30,22 @@ #include <linux/slab.h> /** + * struct ab8500_shared_mode - is used when mode is shared between + * two regulators. + * @shared_regulator: pointer to the other sharing regulator + * @lp_mode_req: low power mode requested by this regulator + */ +struct ab8500_shared_mode { + struct ab8500_regulator_info *shared_regulator; + bool lp_mode_req; +}; + +/** * struct ab8500_regulator_info - ab8500 regulator information * @dev: device pointer * @desc: regulator description * @regulator_dev: regulator device + * @shared_mode: used when mode is shared between two regulators * @is_enabled: status of regulator (on/off) * @load_lp_uA: maximum load in idle (low power) mode * @update_bank: bank to control on/off @@ -42,6 +54,11 @@ * @update_val: bits holding the regulator current mode * @update_val_idle: bits to enable the regulator in idle (low power) mode * @update_val_normal: bits to enable the regulator in normal (high power) mode + * @mode_bank: bank with location of mode register + * @mode_reg: mode register + * @mode_mask: mask for setting mode + * @mode_val_idle: mode setting for low power + * @mode_val_normal: mode setting for normal power * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage @@ -51,6 +68,7 @@ struct ab8500_regulator_info { struct device *dev; struct regulator_desc desc; struct regulator_dev *regulator; + struct ab8500_shared_mode *shared_mode; bool is_enabled; int load_lp_uA; u8 update_bank; @@ -59,6 +77,11 @@ struct ab8500_regulator_info { u8 update_val; u8 update_val_idle; u8 update_val_normal; + u8 mode_bank; + u8 mode_reg; + u8 mode_mask; + u8 mode_val_idle; + u8 mode_val_normal; u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; @@ -189,6 +212,10 @@ static const unsigned int ldo_vaudio_voltages[] = { 2600000, /* Duplicated in Vaudio and IsoUicc Control register. */ }; +static DEFINE_MUTEX(shared_mode_mutex); +static struct ab8500_shared_mode ldo_anamic1_shared; +static struct ab8500_shared_mode ldo_anamic2_shared; + static int ab8500_regulator_enable(struct regulator_dev *rdev) { int ret; @@ -271,8 +298,12 @@ static unsigned int ab8500_regulator_get_optimum_mode( static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { - int ret; - u8 update_val; + int ret = 0; + u8 bank; + u8 reg; + u8 mask; + u8 val; + bool dmr = false; /* Dedicated mode register */ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { @@ -280,59 +311,128 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev, return -EINVAL; } - switch (mode) { - case REGULATOR_MODE_NORMAL: - update_val = info->update_val_normal; - break; - case REGULATOR_MODE_IDLE: - update_val = info->update_val_idle; - break; - default: - return -EINVAL; + if (info->shared_mode) { + /* + * Special case where mode is shared between two regulators. + */ + struct ab8500_shared_mode *sm = info->shared_mode; + mutex_lock(&shared_mode_mutex); + + if (mode == REGULATOR_MODE_IDLE) { + sm->lp_mode_req = true; /* Low power mode requested */ + if (!((sm->shared_regulator)-> + shared_mode->lp_mode_req)) { + mutex_unlock(&shared_mode_mutex); + return 0; /* Other regulator prevent LP mode */ + } + } else { + sm->lp_mode_req = false; + } } - /* ab8500 regulators share mode and enable in the same register bits. - off = 0b00 - low power mode= 0b11 - full powermode = 0b01 - (HW control mode = 0b10) - Thus we don't write to the register when regulator is disabled. - */ - if (info->is_enabled) { + if (info->mode_mask) { + /* Dedicated register for handling mode */ + + dmr = true; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = info->mode_val_normal; + break; + case REGULATOR_MODE_IDLE: + val = info->mode_val_idle; + break; + default: + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); + return -EINVAL; + } + + bank = info->mode_bank; + reg = info->mode_reg; + mask = info->mode_mask; + } else { + /* Mode register same as enable register */ + + switch (mode) { + case REGULATOR_MODE_NORMAL: + info->update_val = info->update_val_normal; + val = info->update_val_normal; + break; + case REGULATOR_MODE_IDLE: + info->update_val = info->update_val_idle; + val = info->update_val_idle; + break; + default: + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); + return -EINVAL; + } + + bank = info->update_bank; + reg = info->update_reg; + mask = info->update_mask; + } + + if (info->is_enabled || dmr) { ret = abx500_mask_and_set_register_interruptible(info->dev, - info->update_bank, info->update_reg, - info->update_mask, update_val); - if (ret < 0) { + bank, reg, mask, val); + if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set regulator mode\n"); - return ret; - } dev_vdbg(rdev_get_dev(rdev), "%s-set_mode (bank, reg, mask, value): " "0x%x, 0x%x, 0x%x, 0x%x\n", - info->desc.name, info->update_bank, info->update_reg, - info->update_mask, update_val); + info->desc.name, bank, reg, + mask, val); } - info->update_val = update_val; + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); - return 0; + return ret; } static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev) { struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); int ret; + u8 val; + u8 val_normal; + u8 val_idle; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } - if (info->update_val == info->update_val_normal) + /* Need special handling for shared mode */ + if (info->shared_mode) { + if (info->shared_mode->lp_mode_req) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; + } + + if (info->mode_mask) { + /* Dedicated register for handling mode */ + ret = abx500_get_register_interruptible(info->dev, + info->mode_bank, info->mode_reg, &val); + val = val & info->mode_mask; + + val_normal = info->mode_val_normal; + val_idle = info->mode_val_idle; + } else { + /* Mode register same as enable register */ + val = info->update_val; + val_normal = info->update_val_normal; + val_idle = info->update_val_idle; + } + + if (val == val_normal) ret = REGULATOR_MODE_NORMAL; - else if (info->update_val == info->update_val_idle) + else if (val == val_idle) ret = REGULATOR_MODE_IDLE; else ret = -EINVAL; @@ -585,6 +685,15 @@ static struct regulator_ops ab8500_regulator_ops = { .list_voltage = regulator_list_voltage_linear, }; +static struct regulator_ops ab8500_regulator_anamic_mode_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .set_mode = ab8500_regulator_set_mode, + .get_mode = ab8500_regulator_get_mode, + .list_voltage = regulator_list_voltage_table, +}; + /* AB8500 regulator information */ static struct ab8500_regulator_info ab8500_regulator_info[AB8500_NUM_REGULATORS] = { @@ -1024,32 +1133,44 @@ static struct ab8500_regulator_info [AB8505_LDO_ANAMIC1] = { .desc = { .name = "LDO-ANAMIC1", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_anamic_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8505_LDO_ANAMIC1, .owner = THIS_MODULE, .n_voltages = 1, .volt_table = fixed_2050000_voltage, }, + .shared_mode = &ldo_anamic1_shared, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x08, .update_val = 0x08, + .mode_bank = 0x01, + .mode_reg = 0x54, + .mode_mask = 0x04, + .mode_val_idle = 0x04, + .mode_val_normal = 0x00, }, [AB8505_LDO_ANAMIC2] = { .desc = { .name = "LDO-ANAMIC2", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_anamic_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8505_LDO_ANAMIC2, .owner = THIS_MODULE, .n_voltages = 1, .volt_table = fixed_2050000_voltage, }, + .shared_mode = &ldo_anamic2_shared, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x10, .update_val = 0x10, + .mode_bank = 0x01, + .mode_reg = 0x54, + .mode_mask = 0x04, + .mode_val_idle = 0x04, + .mode_val_normal = 0x00, }, [AB8505_LDO_AUX8] = { .desc = { @@ -1589,6 +1710,14 @@ static struct ab8500_regulator_info }, }; +static struct ab8500_shared_mode ldo_anamic1_shared = { + .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2], +}; + +static struct ab8500_shared_mode ldo_anamic2_shared = { + .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1], +}; + struct ab8500_reg_init { u8 bank; u8 addr; |