summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/Makefile
diff options
context:
space:
mode:
authorHeiko Stübner <heiko@sntech.de>2011-10-05 12:27:05 +0200
committerMark Brown <broonie@opensource.wolfsonmicro.com>2011-10-09 12:36:21 +0100
commit3f0292ae8bb100cc8f96106a3de277df48134887 (patch)
tree6638f4fb724c40042690364d9f682f7350f32110 /drivers/regulator/Makefile
parente3efe6669bf9c3cbd955b5a2976c70d79e8fd745 (diff)
downloadop-kernel-dev-3f0292ae8bb100cc8f96106a3de277df48134887.zip
op-kernel-dev-3f0292ae8bb100cc8f96106a3de277df48134887.tar.gz
regulator: Add driver for gpio-controlled regulators
This patch adds support for regulators that can be controlled via gpios. Examples for such regulators are the TI-tps65024x voltage regulators with 4 fixed and 1 runtime-switchable voltage regulators or the TI-bq240XX charger regulators. The number of controlling gpios is not limited, the mapping between voltage/current and target gpio state is done via the states map and the driver can be used for either voltage or current regulators. A mapping for a regulator with two GPIOs could look like: gpios = { { .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" }, { .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" }, } The flags element of the gpios array determines the initial state of the gpio, set during probe. The initial state of the regulator is also calculated from these values states = { { .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) }, { .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) }, { .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) }, { .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) }, } The target-state for the n-th gpio is determined by the n-th bit in the bitfield of the target-value. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/regulator/Makefile')
-rw-r--r--drivers/regulator/Makefile1
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 040d5aa..93a6318 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
OpenPOWER on IntegriCloud