Merge branch 'master' into for-next

11 files changed, 1498 insertions, 86 deletions

diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index c32822a..070211a 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -8,3 +8,27 @@ config RAPIDIO_DISC_TIMEOUT
 	---help---
 	  Amount of time a discovery node waits for a host to complete
 	  enumeration before giving up.
+
+config RAPIDIO_ENABLE_RX_TX_PORTS
+	bool "Enable RapidIO Input/Output Ports"
+	depends on RAPIDIO
+	---help---
+	  The RapidIO specification describes a Output port transmit
+	  enable and a Input port receive enable. The recommended state
+	  for Input ports and Output ports should be disabled. When
+	  this switch is set the RapidIO subsystem will enable all
+	  ports for Input/Output direction to allow other traffic
+	  than Maintenance transfers.
+
+source "drivers/rapidio/switches/Kconfig"
+
+config RAPIDIO_DEBUG
+	bool "RapidIO subsystem debug messages"
+	depends on RAPIDIO
+	help
+	  Say Y here if you want the RapidIO subsystem to produce a bunch of
+	  debug messages to the system log. Select this if you are having a
+	  problem with the RapidIO subsystem and want to see more of what is
+	  going on.
+
+	  If you are unsure about this, say N here.
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 7c0e181..b6139fe 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,3 +4,7 @@
 obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
+
+ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4541509..8070e07 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -4,6 +4,14 @@
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - Added Input- Output- enable functionality, to allow full communication
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -31,15 +39,16 @@
 LIST_HEAD(rio_devices);
 static LIST_HEAD(rio_switches);
 
-#define RIO_ENUM_CMPL_MAGIC	0xdeadbeef
-
 static void rio_enum_timeout(unsigned long);
 
+static void rio_init_em(struct rio_dev *rdev);
+
 DEFINE_SPINLOCK(rio_global_list_lock);
 
 static int next_destid = 0;
 static int next_switchid = 0;
 static int next_net = 0;
+static int next_comptag;
 
 static struct timer_list rio_enum_timer =
 TIMER_INITIALIZER(rio_enum_timeout, 0, 0);
@@ -52,12 +61,6 @@ static int rio_mport_phys_table[] = {
 	-1,
 };
 
-static int rio_sport_phys_table[] = {
-	RIO_EFB_PAR_EP_FREE_ID,
-	RIO_EFB_SER_EP_FREE_ID,
-	-1,
-};
-
 /**
  * rio_get_device_id - Get the base/extended device id for a device
  * @port: RIO master port
@@ -118,12 +121,26 @@ static int rio_clear_locks(struct rio_mport *port)
 	u32 result;
 	int ret = 0;
 
-	/* Write component tag CSR magic complete value */
-	rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR,
-				  RIO_ENUM_CMPL_MAGIC);
-	list_for_each_entry(rdev, &rio_devices, global_list)
-	    rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR,
-				RIO_ENUM_CMPL_MAGIC);
+	/* Assign component tag to all devices */
+	next_comptag = 1;
+	rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR, next_comptag++);
+
+	list_for_each_entry(rdev, &rio_devices, global_list) {
+		/* Mark device as discovered */
+		rio_read_config_32(rdev,
+				   rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+				   &result);
+		rio_write_config_32(rdev,
+				    rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+				    result | RIO_PORT_GEN_DISCOVERED);
+
+		rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR, next_comptag);
+		rdev->comp_tag = next_comptag++;
+		if (next_comptag >= 0x10000) {
+			pr_err("RIO: Component Tag Counter Overflow\n");
+			break;
+		}
+	}
 
 	/* Release host device id locks */
 	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
@@ -229,27 +246,37 @@ static int rio_is_switch(struct rio_dev *rdev)
 }
 
 /**
- * rio_route_set_ops- Sets routing operations for a particular vendor switch
+ * rio_switch_init - Sets switch operations for a particular vendor switch
  * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
  *
- * Searches the RIO route ops table for known switch types. If the vid
- * and did match a switch table entry, then set the add_entry() and
- * get_entry() ops to the table entry values.
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
  */
-static void rio_route_set_ops(struct rio_dev *rdev)
+static void rio_switch_init(struct rio_dev *rdev, int do_enum)
 {
-	struct rio_route_ops *cur = __start_rio_route_ops;
-	struct rio_route_ops *end = __end_rio_route_ops;
+	struct rio_switch_ops *cur = __start_rio_switch_ops;
+	struct rio_switch_ops *end = __end_rio_switch_ops;
 
 	while (cur < end) {
 		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
-			pr_debug("RIO: adding routing ops for %s\n", rio_name(rdev));
-			rdev->rswitch->add_entry = cur->add_hook;
-			rdev->rswitch->get_entry = cur->get_hook;
+			pr_debug("RIO: calling init routine for %s\n",
+				 rio_name(rdev));
+			cur->init_hook(rdev, do_enum);
+			break;
 		}
 		cur++;
 	}
 
+	if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+		pr_debug("RIO: adding STD routing ops for %s\n",
+			rio_name(rdev));
+		rdev->rswitch->add_entry = rio_std_route_add_entry;
+		rdev->rswitch->get_entry = rio_std_route_get_entry;
+		rdev->rswitch->clr_table = rio_std_route_clr_table;
+	}
+
 	if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
 		printk(KERN_ERR "RIO: missing routing ops for %s\n",
 		       rio_name(rdev));
@@ -281,6 +308,65 @@ static int __devinit rio_add_device(struct rio_dev *rdev)
 }
 
 /**
+ * rio_enable_rx_tx_port - enable input reciever and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+inline int rio_enable_rx_tx_port(struct rio_mport *port,
+				 int local, u16 destid,
+				 u8 hopcount, u8 port_num) {
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+	u32 regval;
+	u32 ext_ftr_ptr;
+
+	/*
+	* enable rx input tx output port
+	*/
+	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+	if (local) {
+		rio_local_read_config_32(port, ext_ftr_ptr +
+				RIO_PORT_N_CTL_CSR(0),
+				&regval);
+	} else {
+		if (rio_mport_read_config_32(port, destid, hopcount,
+		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+			return -EIO;
+	}
+
+	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+		/* serial */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+				| RIO_PORT_N_CTL_EN_TX_SER;
+	} else {
+		/* parallel */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+				| RIO_PORT_N_CTL_EN_TX_PAR;
+	}
+
+	if (local) {
+		rio_local_write_config_32(port, ext_ftr_ptr +
+					  RIO_PORT_N_CTL_CSR(0), regval);
+	} else {
+		if (rio_mport_write_config_32(port, destid, hopcount,
+		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+			return -EIO;
+	}
+#endif
+	return 0;
+}
+
+/**
  * rio_setup_device- Allocates and sets up a RIO device
  * @net: RIO network
  * @port: Master port to send transactions
@@ -325,8 +411,14 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 	rdev->asm_rev = result >> 16;
 	rio_mport_read_config_32(port, destid, hopcount, RIO_PEF_CAR,
 				 &rdev->pef);
-	if (rdev->pef & RIO_PEF_EXT_FEATURES)
+	if (rdev->pef & RIO_PEF_EXT_FEATURES) {
 		rdev->efptr = result & 0xffff;
+		rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+							 hopcount);
+
+		rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+						hopcount, RIO_EFB_ERR_MGMNT);
+	}
 
 	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
 				 &rdev->src_ops);
@@ -349,12 +441,13 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 	if (rio_is_switch(rdev)) {
 		rio_mport_read_config_32(port, destid, hopcount,
 					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
-		rswitch = kmalloc(sizeof(struct rio_switch), GFP_KERNEL);
+		rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
 		if (!rswitch)
 			goto cleanup;
 		rswitch->switchid = next_switchid;
 		rswitch->hopcount = hopcount;
 		rswitch->destid = destid;
+		rswitch->port_ok = 0;
 		rswitch->route_table = kzalloc(sizeof(u8)*
 					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
 					GFP_KERNEL);
@@ -367,13 +460,22 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 		rdev->rswitch = rswitch;
 		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
 			     rdev->rswitch->switchid);
-		rio_route_set_ops(rdev);
+		rio_switch_init(rdev, do_enum);
+
+		if (do_enum && rdev->rswitch->clr_table)
+			rdev->rswitch->clr_table(port, destid, hopcount,
+						 RIO_GLOBAL_TABLE);
 
 		list_add_tail(&rswitch->node, &rio_switches);
 
-	} else
+	} else {
+		if (do_enum)
+			/*Enable Input Output Port (transmitter reviever)*/
+			rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
+
 		dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
 			     rdev->destid);
+	}
 
 	rdev->dev.bus = &rio_bus_type;
 
@@ -414,23 +516,29 @@ cleanup:
  *
  * Reads the port error status CSR for a particular switch port to
  * determine if the port has an active link.  Returns
- * %PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
  * inactive.
  */
 static int
 rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
 {
-	u32 result;
+	u32 result = 0;
 	u32 ext_ftr_ptr;
 
-	int *entry = rio_sport_phys_table;
-
-	do {
-		if ((ext_ftr_ptr =
-		     rio_mport_get_feature(port, 0, destid, hopcount, *entry)))
+	ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
 
+	while (ext_ftr_ptr) {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 ext_ftr_ptr, &result);
+		result = RIO_GET_BLOCK_ID(result);
+		if ((result == RIO_EFB_SER_EP_FREE_ID) ||
+		    (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
+		    (result == RIO_EFB_SER_EP_FREC_ID))
 			break;
-	} while (*++entry >= 0);
+
+		ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
+						ext_ftr_ptr);
+	}
 
 	if (ext_ftr_ptr)
 		rio_mport_read_config_32(port, destid, hopcount,
@@ -438,7 +546,81 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
 					 RIO_PORT_N_ERR_STS_CSR(sport),
 					 &result);
 
-	return (result & PORT_N_ERR_STS_PORT_OK);
+	return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+/**
+ * rio_lock_device - Acquires host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ * @wait_ms: Max wait time in msec (0 = no timeout)
+ *
+ * Attepts to acquire host device lock for specified device
+ * Returns 0 if device lock acquired or EINVAL if timeout expires.
+ */
+static int
+rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms)
+{
+	u32 result;
+	int tcnt = 0;
+
+	/* Attempt to acquire device lock */
+	rio_mport_write_config_32(port, destid, hopcount,
+				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+	rio_mport_read_config_32(port, destid, hopcount,
+				 RIO_HOST_DID_LOCK_CSR, &result);
+
+	while (result != port->host_deviceid) {
+		if (wait_ms != 0 && tcnt == wait_ms) {
+			pr_debug("RIO: timeout when locking device %x:%x\n",
+				destid, hopcount);
+			return -EINVAL;
+		}
+
+		/* Delay a bit */
+		mdelay(1);
+		tcnt++;
+		/* Try to acquire device lock again */
+		rio_mport_write_config_32(port, destid,
+			hopcount,
+			RIO_HOST_DID_LOCK_CSR,
+			port->host_deviceid);
+		rio_mport_read_config_32(port, destid,
+			hopcount,
+			RIO_HOST_DID_LOCK_CSR, &result);
+	}
+
+	return 0;
+}
+
+/**
+ * rio_unlock_device - Releases host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ *
+ * Returns 0 if device lock released or EINVAL if fails.
+ */
+static int
+rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+	u32 result;
+
+	/* Release device lock */
+	rio_mport_write_config_32(port, destid,
+				  hopcount,
+				  RIO_HOST_DID_LOCK_CSR,
+				  port->host_deviceid);
+	rio_mport_read_config_32(port, destid, hopcount,
+		RIO_HOST_DID_LOCK_CSR, &result);
+	if ((result & 0xffff) != 0xffff) {
+		pr_debug("RIO: badness when releasing device lock %x:%x\n",
+			 destid, hopcount);
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 /**
@@ -448,6 +630,7 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
  * @table: Routing table ID
  * @route_destid: Destination ID to be routed
  * @route_port: Port number to be routed
+ * @lock: lock switch device flag
  *
  * Calls the switch specific add_entry() method to add a route entry
  * on a switch. The route table can be specified using the @table
@@ -456,12 +639,26 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
  * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
  * on failure.
  */
-static int rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswitch,
-			       u16 table, u16 route_destid, u8 route_port)
+static int
+rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswitch,
+		    u16 table, u16 route_destid, u8 route_port, int lock)
 {
-	return rswitch->add_entry(mport, rswitch->destid,
+	int rc;
+
+	if (lock) {
+		rc = rio_lock_device(mport, rswitch->destid,
+				     rswitch->hopcount, 1000);
+		if (rc)
+			return rc;
+	}
+
+	rc = rswitch->add_entry(mport, rswitch->destid,
 					rswitch->hopcount, table,
 					route_destid, route_port);
+	if (lock)
+		rio_unlock_device(mport, rswitch->destid, rswitch->hopcount);
+
+	return rc;
 }
 
 /**
@@ -471,6 +668,7 @@ static int rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswit
  * @table: Routing table ID
  * @route_destid: Destination ID to be routed
  * @route_port: Pointer to read port number into
+ * @lock: lock switch device flag
  *
  * Calls the switch specific get_entry() method to read a route entry
  * in a switch. The route table can be specified using the @table
@@ -481,11 +679,24 @@ static int rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswit
  */
 static int
 rio_route_get_entry(struct rio_mport *mport, struct rio_switch *rswitch, u16 table,
-		    u16 route_destid, u8 * route_port)
+		    u16 route_destid, u8 *route_port, int lock)
 {
-	return rswitch->get_entry(mport, rswitch->destid,
+	int rc;
+
+	if (lock) {
+		rc = rio_lock_device(mport, rswitch->destid,
+				     rswitch->hopcount, 1000);
+		if (rc)
+			return rc;
+	}
+
+	rc = rswitch->get_entry(mport, rswitch->destid,
 					rswitch->hopcount, table,
 					route_destid, route_port);
+	if (lock)
+		rio_unlock_device(mport, rswitch->destid, rswitch->hopcount);
+
+	return rc;
 }
 
 /**
@@ -625,14 +836,14 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 		sw_inport = rio_get_swpinfo_inport(port,
 				RIO_ANY_DESTID(port->sys_size), hopcount);
 		rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
-				    port->host_deviceid, sw_inport);
+				    port->host_deviceid, sw_inport, 0);
 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
 
 		for (destid = 0; destid < next_destid; destid++) {
 			if (destid == port->host_deviceid)
 				continue;
 			rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
-					    destid, sw_inport);
+					    destid, sw_inport, 0);
 			rdev->rswitch->route_table[destid] = sw_inport;
 		}
 
@@ -644,8 +855,15 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 		    rio_name(rdev), rdev->vid, rdev->did, num_ports);
 		sw_destid = next_destid;
 		for (port_num = 0; port_num < num_ports; port_num++) {
-			if (sw_inport == port_num)
+			/*Enable Input Output Port (transmitter reviever)*/
+			rio_enable_rx_tx_port(port, 0,
+					      RIO_ANY_DESTID(port->sys_size),
+					      hopcount, port_num);
+
+			if (sw_inport == port_num) {
+				rdev->rswitch->port_ok |= (1 << port_num);
 				continue;
+			}
 
 			cur_destid = next_destid;
 
@@ -655,10 +873,11 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
+				rdev->rswitch->port_ok |= (1 << port_num);
 				rio_route_add_entry(port, rdev->rswitch,
 						RIO_GLOBAL_TABLE,
 						RIO_ANY_DESTID(port->sys_size),
-						port_num);
+						port_num, 0);
 
 				if (rio_enum_peer(net, port, hopcount + 1) < 0)
 					return -1;
@@ -672,15 +891,35 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 						rio_route_add_entry(port, rdev->rswitch,
 								    RIO_GLOBAL_TABLE,
 								    destid,
-								    port_num);
+								    port_num,
+								    0);
 						rdev->rswitch->
 						    route_table[destid] =
 						    port_num;
 					}
 				}
+			} else {
+				/* If switch supports Error Management,
+				 * set PORT_LOCKOUT bit for unused port
+				 */
+				if (rdev->em_efptr)
+					rio_set_port_lockout(rdev, port_num, 1);
+
+				rdev->rswitch->port_ok &= ~(1 << port_num);
 			}
 		}
 
+		/* Direct Port-write messages to the enumeratiing host */
+		if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+		    (rdev->em_efptr)) {
+			rio_write_config_32(rdev,
+					rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+					(port->host_deviceid << 16) |
+					(port->sys_size << 15));
+		}
+
+		rio_init_em(rdev);
+
 		/* Check for empty switch */
 		if (next_destid == sw_destid) {
 			next_destid++;
@@ -700,21 +939,16 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
  * rio_enum_complete- Tests if enumeration of a network is complete
  * @port: Master port to send transaction
  *
- * Tests the Component Tag CSR for presence of the magic enumeration
- * complete flag. Return %1 if enumeration is complete or %0 if
+ * Tests the Component Tag CSR for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
  * enumeration is incomplete.
  */
 static int rio_enum_complete(struct rio_mport *port)
 {
 	u32 tag_csr;
-	int ret = 0;
 
 	rio_local_read_config_32(port, RIO_COMPONENT_TAG_CSR, &tag_csr);
-
-	if (tag_csr == RIO_ENUM_CMPL_MAGIC)
-		ret = 1;
-
-	return ret;
+	return (tag_csr & 0xffff) ? 1 : 0;
 }
 
 /**
@@ -763,17 +997,21 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
+
+				rio_lock_device(port, destid, hopcount, 1000);
+
 				for (ndestid = 0;
 				     ndestid < RIO_ANY_DESTID(port->sys_size);
 				     ndestid++) {
 					rio_route_get_entry(port, rdev->rswitch,
 							    RIO_GLOBAL_TABLE,
 							    ndestid,
-							    &route_port);
+							    &route_port, 0);
 					if (route_port == port_num)
 						break;
 				}
 
+				rio_unlock_device(port, destid, hopcount);
 				if (rio_disc_peer
 				    (net, port, ndestid, hopcount + 1) < 0)
 					return -1;
@@ -792,7 +1030,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
  *
  * Reads the port error status CSR for the master port to
  * determine if the port has an active link.  Returns
- * %PORT_N_ERR_STS_PORT_OK if the  master port is active
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the  master port is active
  * or %0 if it is inactive.
  */
 static int rio_mport_is_active(struct rio_mport *port)
@@ -813,7 +1051,7 @@ static int rio_mport_is_active(struct rio_mport *port)
 					 RIO_PORT_N_ERR_STS_CSR(port->index),
 					 &result);
 
-	return (result & PORT_N_ERR_STS_PORT_OK);
+	return result & RIO_PORT_N_ERR_STS_PORT_OK;
 }
 
 /**
@@ -866,12 +1104,17 @@ static void rio_update_route_tables(struct rio_mport *port)
 				continue;
 
 			if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
+				/* Skip if destid ends in empty switch*/
+				if (rswitch->destid == destid)
+					continue;
 
 				sport = rio_get_swpinfo_inport(port,
 						rswitch->destid, rswitch->hopcount);
 
 				if (rswitch->add_entry)	{
-					rio_route_add_entry(port, rswitch, RIO_GLOBAL_TABLE, destid, sport);
+					rio_route_add_entry(port, rswitch,
+						RIO_GLOBAL_TABLE, destid,
+						sport, 0);
 					rswitch->route_table[destid] = sport;
 				}
 			}
@@ -880,6 +1123,32 @@ static void rio_update_route_tables(struct rio_mport *port)
 }
 
 /**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @rdev: RIO device
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+	if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+	    (rdev->rswitch->em_init)) {
+		rdev->rswitch->em_init(rdev);
+	}
+}
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @port: Master port associated with port-write handling
+ * @enable:  1=enable,  0=disable
+ */
+static void rio_pw_enable(struct rio_mport *port, int enable)
+{
+	if (port->ops->pwenable)
+		port->ops->pwenable(port, enable);
+}
+
+/**
  * rio_enum_mport- Start enumeration through a master port
  * @mport: Master port to send transactions
  *
@@ -911,6 +1180,10 @@ int __devinit rio_enum_mport(struct rio_mport *mport)
 			rc = -ENOMEM;
 			goto out;
 		}
+
+		/* Enable Input Output Port (transmitter reviever) */
+		rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
+
 		if (rio_enum_peer(net, mport, 0) < 0) {
 			/* A higher priority host won enumeration, bail. */
 			printk(KERN_INFO
@@ -922,6 +1195,7 @@ int __devinit rio_enum_mport(struct rio_mport *mport)
 		}
 		rio_update_route_tables(mport);
 		rio_clear_locks(mport);
+		rio_pw_enable(mport, 1);
 	} else {
 		printk(KERN_INFO "RIO: master port %d link inactive\n",
 		       mport->id);
@@ -945,15 +1219,22 @@ static void rio_build_route_tables(void)
 	u8 sport;
 
 	list_for_each_entry(rdev, &rio_devices, global_list)
-	    if (rio_is_switch(rdev))
-		for (i = 0;
-		     i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
-		     i++) {
-			if (rio_route_get_entry
-			    (rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
-			     i, &sport) < 0)
-				continue;
-			rdev->rswitch->route_table[i] = sport;
+		if (rio_is_switch(rdev)) {
+			rio_lock_device(rdev->net->hport, rdev->rswitch->destid,
+					rdev->rswitch->hopcount, 1000);
+			for (i = 0;
+			     i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+			     i++) {
+				if (rio_route_get_entry
+				    (rdev->net->hport, rdev->rswitch,
+				     RIO_GLOBAL_TABLE, i, &sport, 0) < 0)
+					continue;
+				rdev->rswitch->route_table[i] = sport;
+			}
+
+			rio_unlock_device(rdev->net->hport,
+					  rdev->rswitch->destid,
+					  rdev->rswitch->hopcount);
 		}
 }
 
@@ -1012,6 +1293,13 @@ int __devinit rio_disc_mport(struct rio_mport *mport)
 		del_timer_sync(&rio_enum_timer);
 
 		pr_debug("done\n");
+
+		/* Read DestID assigned by enumerator */
+		rio_local_read_config_32(mport, RIO_DID_CSR,
+					 &mport->host_deviceid);
+		mport->host_deviceid = RIO_GET_DID(mport->sys_size,
+						   mport->host_deviceid);
+
 		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
 					0) < 0) {
 			printk(KERN_INFO
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 6395c78..08fa453 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -5,6 +5,10 @@
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -333,6 +337,331 @@ int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
 }
 
 /**
+ * rio_request_inb_pwrite - request inbound port-write message service
+ * @rdev: RIO device to which register inbound port-write callback routine
+ * @pwcback: Callback routine to execute when port-write is received
+ *
+ * Binds a port-write callback function to the RapidIO device.
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_request_inb_pwrite(struct rio_dev *rdev,
+	int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
+{
+	int rc = 0;
+
+	spin_lock(&rio_global_list_lock);
+	if (rdev->pwcback != NULL)
+		rc = -ENOMEM;
+	else
+		rdev->pwcback = pwcback;
+
+	spin_unlock(&rio_global_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
+
+/**
+ * rio_release_inb_pwrite - release inbound port-write message service
+ * @rdev: RIO device which registered for inbound port-write callback
+ *
+ * Removes callback from the rio_dev structure. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_pwrite(struct rio_dev *rdev)
+{
+	int rc = -ENOMEM;
+
+	spin_lock(&rio_global_list_lock);
+	if (rdev->pwcback) {
+		rdev->pwcback = NULL;
+		rc = 0;
+	}
+
+	spin_unlock(&rio_global_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
+
+/**
+ * rio_mport_get_physefb - Helper function that returns register offset
+ *                      for Physical Layer Extended Features Block.
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ */
+u32
+rio_mport_get_physefb(struct rio_mport *port, int local,
+		      u16 destid, u8 hopcount)
+{
+	u32 ext_ftr_ptr;
+	u32 ftr_header;
+
+	ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
+
+	while (ext_ftr_ptr)  {
+		if (local)
+			rio_local_read_config_32(port, ext_ftr_ptr,
+						 &ftr_header);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 ext_ftr_ptr, &ftr_header);
+
+		ftr_header = RIO_GET_BLOCK_ID(ftr_header);
+		switch (ftr_header) {
+
+		case RIO_EFB_SER_EP_ID_V13P:
+		case RIO_EFB_SER_EP_REC_ID_V13P:
+		case RIO_EFB_SER_EP_FREE_ID_V13P:
+		case RIO_EFB_SER_EP_ID:
+		case RIO_EFB_SER_EP_REC_ID:
+		case RIO_EFB_SER_EP_FREE_ID:
+		case RIO_EFB_SER_EP_FREC_ID:
+
+			return ext_ftr_ptr;
+
+		default:
+			break;
+		}
+
+		ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
+						hopcount, ext_ftr_ptr);
+	}
+
+	return ext_ftr_ptr;
+}
+
+/**
+ * rio_get_comptag - Begin or continue searching for a RIO device by component tag
+ * @comp_tag: RIO component tag to match
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @comp_tag, a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list.
+ */
+static struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
+{
+	struct list_head *n;
+	struct rio_dev *rdev;
+
+	spin_lock(&rio_global_list_lock);
+	n = from ? from->global_list.next : rio_devices.next;
+
+	while (n && (n != &rio_devices)) {
+		rdev = rio_dev_g(n);
+		if (rdev->comp_tag == comp_tag)
+			goto exit;
+		n = n->next;
+	}
+	rdev = NULL;
+exit:
+	spin_unlock(&rio_global_list_lock);
+	return rdev;
+}
+
+/**
+ * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to set LOCKOUT bit
+ * @lock: Operation : set (=1) or clear (=0)
+ */
+int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
+{
+	u8 hopcount = 0xff;
+	u16 destid = rdev->destid;
+	u32 regval;
+
+	if (rdev->rswitch) {
+		destid = rdev->rswitch->destid;
+		hopcount = rdev->rswitch->hopcount;
+	}
+
+	rio_mport_read_config_32(rdev->net->hport, destid, hopcount,
+				 rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+				 &regval);
+	if (lock)
+		regval |= RIO_PORT_N_CTL_LOCKOUT;
+	else
+		regval &= ~RIO_PORT_N_CTL_LOCKOUT;
+
+	rio_mport_write_config_32(rdev->net->hport, destid, hopcount,
+				  rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+				  regval);
+	return 0;
+}
+
+/**
+ * rio_inb_pwrite_handler - process inbound port-write message
+ * @pw_msg: pointer to inbound port-write message
+ *
+ * Processes an inbound port-write message. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
+{
+	struct rio_dev *rdev;
+	struct rio_mport *mport;
+	u8 hopcount;
+	u16 destid;
+	u32 err_status;
+	int rc, portnum;
+
+	rdev = rio_get_comptag(pw_msg->em.comptag, NULL);
+	if (rdev == NULL) {
+		/* Someting bad here (probably enumeration error) */
+		pr_err("RIO: %s No matching device for CTag 0x%08x\n",
+			__func__, pw_msg->em.comptag);
+		return -EIO;
+	}
+
+	pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
+
+#ifdef DEBUG_PW
+	{
+	u32 i;
+	for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
+			pr_debug("0x%02x: %08x %08x %08x %08x",
+				 i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
+				 pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
+			i += 4;
+	}
+	pr_debug("\n");
+	}
+#endif
+
+	/* Call an external service function (if such is registered
+	 * for this device). This may be the service for endpoints that send
+	 * device-specific port-write messages. End-point messages expected
+	 * to be handled completely by EP specific device driver.
+	 * For switches rc==0 signals that no standard processing required.
+	 */
+	if (rdev->pwcback != NULL) {
+		rc = rdev->pwcback(rdev, pw_msg, 0);
+		if (rc == 0)
+			return 0;
+	}
+
+	/* For End-point devices processing stops here */
+	if (!(rdev->pef & RIO_PEF_SWITCH))
+		return 0;
+
+	if (rdev->phys_efptr == 0) {
+		pr_err("RIO_PW: Bad switch initialization for %s\n",
+			rio_name(rdev));
+		return 0;
+	}
+
+	mport = rdev->net->hport;
+	destid = rdev->rswitch->destid;
+	hopcount = rdev->rswitch->hopcount;
+
+	/*
+	 * Process the port-write notification from switch
+	 */
+
+	portnum = pw_msg->em.is_port & 0xFF;
+
+	if (rdev->rswitch->em_handle)
+		rdev->rswitch->em_handle(rdev, portnum);
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			&err_status);
+	pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
+
+	if (pw_msg->em.errdetect) {
+		pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+			 portnum, pw_msg->em.errdetect);
+		/* Clear EM Port N Error Detect CSR */
+		rio_mport_write_config_32(mport, destid, hopcount,
+			rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+	}
+
+	if (pw_msg->em.ltlerrdet) {
+		pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+			 pw_msg->em.ltlerrdet);
+		/* Clear EM L/T Layer Error Detect CSR */
+		rio_mport_write_config_32(mport, destid, hopcount,
+			rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+	}
+
+	/* Clear Port Errors */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			err_status & RIO_PORT_N_ERR_STS_CLR_MASK);
+
+	if (rdev->rswitch->port_ok & (1 << portnum)) {
+		if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) {
+			rdev->rswitch->port_ok &= ~(1 << portnum);
+			rio_set_port_lockout(rdev, portnum, 1);
+
+			rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr +
+					RIO_PORT_N_ACK_STS_CSR(portnum),
+				RIO_PORT_N_ACK_CLEAR);
+
+			/* Schedule Extraction Service */
+			pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
+			       rio_name(rdev), portnum);
+		}
+	} else {
+		if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
+			rdev->rswitch->port_ok |= (1 << portnum);
+			rio_set_port_lockout(rdev, portnum, 0);
+
+			/* Schedule Insertion Service */
+			pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+			       rio_name(rdev), portnum);
+		}
+	}
+
+	/* Clear Port-Write Pending bit */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			RIO_PORT_N_ERR_STS_PW_PEND);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
+
+/**
+ * rio_mport_get_efb - get pointer to next extended features block
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @from: Offset of  current Extended Feature block header (if 0 starts
+ * from	ExtFeaturePtr)
+ */
+u32
+rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+		      u8 hopcount, u32 from)
+{
+	u32 reg_val;
+
+	if (from == 0) {
+		if (local)
+			rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
+						 &reg_val);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 RIO_ASM_INFO_CAR, &reg_val);
+		return reg_val & RIO_EXT_FTR_PTR_MASK;
+	} else {
+		if (local)
+			rio_local_read_config_32(port, from, &reg_val);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 from, &reg_val);
+		return RIO_GET_BLOCK_ID(reg_val);
+	}
+}
+
+/**
  * rio_mport_get_feature - query for devices' extended features
  * @port: Master port to issue transaction
  * @local: Indicate a local master port or remote device access
@@ -451,6 +780,110 @@ struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from)
 	return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from);
 }
 
+/**
+ * rio_std_route_add_entry - Add switch route table entry using standard
+ *   registers defined in RIO specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: destination port for specified destID
+ */
+int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				(u32)route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				(u32)route_port);
+	}
+
+	udelay(10);
+	return 0;
+}
+
+/**
+ * rio_std_route_get_entry - Read switch route table entry (port number)
+ *   assosiated with specified destID using standard registers defined in RIO
+ *   specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: returned destination port for specified destID
+ */
+int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		*route_port = (u8)result;
+	}
+
+	return 0;
+}
+
+/**
+ * rio_std_route_clr_table - Clear swotch route table using standard registers
+ *   defined in RIO specification rev.1.3.
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ */
+int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 max_destid = 0xff;
+	u32 i, pef, id_inc = 1, ext_cfg = 0;
+	u32 port_sel = RIO_INVALID_ROUTE;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+					 RIO_PEF_CAR, &pef);
+
+		if (mport->sys_size) {
+			rio_mport_read_config_32(mport, destid, hopcount,
+						 RIO_SWITCH_RT_LIMIT,
+						 &max_destid);
+			max_destid &= RIO_RT_MAX_DESTID;
+		}
+
+		if (pef & RIO_PEF_EXT_RT) {
+			ext_cfg = 0x80000000;
+			id_inc = 4;
+			port_sel = (RIO_INVALID_ROUTE << 24) |
+				   (RIO_INVALID_ROUTE << 16) |
+				   (RIO_INVALID_ROUTE << 8) |
+				   RIO_INVALID_ROUTE;
+		}
+
+		for (i = 0; i <= max_destid;) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+					RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+					ext_cfg | i);
+			rio_mport_write_config_32(mport, destid, hopcount,
+					RIO_STD_RTE_CONF_PORT_SEL_CSR,
+					port_sel);
+			i += id_inc;
+		}
+	}
+
+	udelay(10);
+	return 0;
+}
+
 static void rio_fixup_device(struct rio_dev *dev)
 {
 }
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 7786d02..f27b7a9 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -18,38 +18,50 @@
 
 extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
 				 u8 hopcount, int ftr);
+extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
+				 u16 destid, u8 hopcount);
+extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+			     u8 hopcount, u32 from);
 extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
 extern int rio_enum_mport(struct rio_mport *mport);
 extern int rio_disc_mport(struct rio_mport *mport);
+extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
+				   u8 hopcount, u16 table, u16 route_destid,
+				   u8 route_port);
+extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid,
+				   u8 hopcount, u16 table, u16 route_destid,
+				   u8 *route_port);
+extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
+				   u8 hopcount, u16 table);
+extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
 
 /* Structures internal to the RIO core code */
 extern struct device_attribute rio_dev_attrs[];
 extern spinlock_t rio_global_list_lock;
 
-extern struct rio_route_ops __start_rio_route_ops[];
-extern struct rio_route_ops __end_rio_route_ops[];
+extern struct rio_switch_ops __start_rio_switch_ops[];
+extern struct rio_switch_ops __end_rio_switch_ops[];
 
 /* Helpers internal to the RIO core code */
-#define DECLARE_RIO_ROUTE_SECTION(section, vid, did, add_hook, get_hook)  \
-	static struct rio_route_ops __rio_route_ops __used   \
-	__section(section)= { vid, did, add_hook, get_hook };
+#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \
+	static const struct rio_switch_ops __rio_switch_##name __used \
+	__section(section) = { vid, did, init_hook };
 
 /**
- * DECLARE_RIO_ROUTE_OPS - Registers switch routing operations
+ * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine
  * @vid: RIO vendor ID
  * @did: RIO device ID
- * @add_hook: Callback that adds a route entry
- * @get_hook: Callback that gets a route entry
+ * @init_hook: Callback that performs switch-specific initialization
  *
- * Manipulating switch route tables in RIO is switch specific. This
- * registers a switch by vendor and device ID with two callbacks for
- * modifying and retrieving route entries in a switch. A &struct
- * rio_route_ops is initialized with the ops and placed into a
- * RIO-specific kernel section.
+ * Manipulating switch route tables and error management in RIO
+ * is switch specific. This registers a switch by vendor and device ID with
+ * initialization callback for setting up switch operations and (if required)
+ * hardware initialization. A &struct rio_switch_ops is initialized with
+ * pointer to the init routine and placed into a RIO-specific kernel section.
  */
-#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook)		\
-	DECLARE_RIO_ROUTE_SECTION(.rio_route_ops,			\
-			vid, did, add_hook, get_hook)
+#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook)		\
+	DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \
+			vid, did, init_hook)
 
 #define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
 #define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
new file mode 100644
index 0000000..2b4e9b2
--- /dev/null
+++ b/drivers/rapidio/switches/Kconfig
@@ -0,0 +1,28 @@
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_TSI57X
+	bool "IDT Tsi57x SRIO switches support"
+	depends on RAPIDIO
+	---help---
+	  Includes support for IDT Tsi57x family of serial RapidIO switches.
+
+config RAPIDIO_CPS_XX
+	bool "IDT CPS-xx SRIO switches support"
+	depends on RAPIDIO
+	---help---
+	  Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_TSI568
+	bool "Tsi568 SRIO switch support"
+	depends on RAPIDIO
+	default n
+	---help---
+	  Includes support for IDT Tsi568 serial RapidIO switch.
+
+config RAPIDIO_TSI500
+	bool "Tsi500 Parallel RapidIO switch support"
+	depends on RAPIDIO
+	default n
+	---help---
+	  Includes support for IDT Tsi500 parallel RapidIO switch.
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
index b924f83..fe4adc3 100644
--- a/drivers/rapidio/switches/Makefile
+++ b/drivers/rapidio/switches/Makefile
@@ -2,4 +2,11 @@
 # Makefile for RIO switches
 #
 
-obj-$(CONFIG_RAPIDIO)	+= tsi500.o
+obj-$(CONFIG_RAPIDIO_TSI57X)	+= tsi57x.o
+obj-$(CONFIG_RAPIDIO_CPS_XX)	+= idtcps.o
+obj-$(CONFIG_RAPIDIO_TSI568)	+= tsi568.o
+obj-$(CONFIG_RAPIDIO_TSI500)	+= tsi500.o
+
+ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
new file mode 100644
index 0000000..2c790c1
--- /dev/null
+++ b/drivers/rapidio/switches/idtcps.c
@@ -0,0 +1,137 @@
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include "../rio.h"
+
+#define CPS_DEFAULT_ROUTE	0xde
+#define CPS_NO_ROUTE		0xdf
+
+#define IDTCPS_RIO_DOMAIN 0xf20020
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		result = (0xffffff00 & result) | (u32)route_port;
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		if (CPS_DEFAULT_ROUTE == (u8)result ||
+		    CPS_NO_ROUTE == (u8)result)
+			*route_port = RIO_INVALID_ROUTE;
+		else
+			*route_port = (u8)result;
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		for (i = 0x80000000; i <= 0x800000ff;) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				(CPS_DEFAULT_ROUTE << 24) |
+				(CPS_DEFAULT_ROUTE << 16) |
+				(CPS_DEFAULT_ROUTE << 8) | CPS_DEFAULT_ROUTE);
+			i += 4;
+		}
+	}
+
+	return 0;
+}
+
+static int
+idtcps_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDTCPS_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDTCPS_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = idtcps_route_add_entry;
+	rdev->rswitch->get_entry = idtcps_route_get_entry;
+	rdev->rswitch->clr_table = idtcps_route_clr_table;
+	rdev->rswitch->set_domain = idtcps_set_domain;
+	rdev->rswitch->get_domain = idtcps_get_domain;
+	rdev->rswitch->em_init = NULL;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init);
diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c
index c77c23b..914eddd 100644
--- a/drivers/rapidio/switches/tsi500.c
+++ b/drivers/rapidio/switches/tsi500.c
@@ -1,6 +1,10 @@
 /*
  * RapidIO Tsi500 switch support
  *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Modified switch operations initialization.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -57,4 +61,18 @@ tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 tab
 	return ret;
 }
 
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry);
+static int tsi500_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi500_route_add_entry;
+	rdev->rswitch->get_entry = tsi500_route_get_entry;
+	rdev->rswitch->clr_table = NULL;
+	rdev->rswitch->set_domain = NULL;
+	rdev->rswitch->get_domain = NULL;
+	rdev->rswitch->em_init = NULL;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init);
diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c
new file mode 100644
index 0000000..f7fd789
--- /dev/null
+++ b/drivers/rapidio/switches/tsi568.c
@@ -0,0 +1,146 @@
+/*
+ * RapidIO Tsi568 switch support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID	0x10070
+#define SPBC_ROUTE_CFG_PORT	0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n)
+
+#define TSI568_SP_MODE_BC	0x10004
+#define  TSI568_SP_MODE_PW_DIS	0x08000000
+
+static int
+tsi568_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_PORT, route_port);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_PORT(table), route_port);
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int
+tsi568_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	int ret = 0;
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_PORT, &result);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_PORT(table), &result);
+	}
+
+	*route_port = result;
+	if (*route_port > 15)
+		ret = -1;
+
+	return ret;
+}
+
+static int
+tsi568_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 route_idx;
+	u32 lut_size;
+
+	lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						SPBC_ROUTE_CFG_PORT,
+						RIO_INVALID_ROUTE);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						SPP_ROUTE_CFG_PORT(table),
+						RIO_INVALID_ROUTE);
+	}
+
+	return 0;
+}
+
+static int
+tsi568_em_init(struct rio_dev *rdev)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 regval;
+
+	pr_debug("TSI568 %s [%d:%d]\n", __func__, destid, hopcount);
+
+	/* Make sure that Port-Writes are disabled (for all ports) */
+	rio_mport_read_config_32(mport, destid, hopcount,
+			TSI568_SP_MODE_BC, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount,
+			TSI568_SP_MODE_BC, regval | TSI568_SP_MODE_PW_DIS);
+
+	return 0;
+}
+
+static int tsi568_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi568_route_add_entry;
+	rdev->rswitch->get_entry = tsi568_route_get_entry;
+	rdev->rswitch->clr_table = tsi568_route_clr_table;
+	rdev->rswitch->set_domain = NULL;
+	rdev->rswitch->get_domain = NULL;
+	rdev->rswitch->em_init = tsi568_em_init;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init);
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
new file mode 100644
index 0000000..d34df72
--- /dev/null
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -0,0 +1,315 @@
+/*
+ * RapidIO Tsi57x switch family support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID	0x10070
+#define SPBC_ROUTE_CFG_PORT	0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n)
+
+#define TSI578_SP_MODE(n)	(0x11004 + n*0x100)
+#define TSI578_SP_MODE_GLBL	0x10004
+#define  TSI578_SP_MODE_PW_DIS	0x08000000
+#define  TSI578_SP_MODE_LUT_512	0x01000000
+
+#define TSI578_SP_CTL_INDEP(n)	(0x13004 + n*0x100)
+#define TSI578_SP_LUT_PEINF(n)	(0x13010 + n*0x100)
+#define TSI578_SP_CS_TX(n)	(0x13014 + n*0x100)
+#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
+
+#define TSI578_GLBL_ROUTE_BASE	0x10078
+
+static int
+tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_PORT, route_port);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table), route_port);
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int
+tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	int ret = 0;
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		/* Use local RT of the ingress port to avoid possible
+		   race condition */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			RIO_SWP_INFO_CAR, &result);
+		table = (result & RIO_SWP_INFO_PORT_NUM_MASK);
+	}
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), route_destid);
+	rio_mport_read_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table), &result);
+
+	*route_port = (u8)result;
+	if (*route_port > 15)
+		ret = -1;
+
+	return ret;
+}
+
+static int
+tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 route_idx;
+	u32 lut_size;
+
+	lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_DESTID, 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						  SPBC_ROUTE_CFG_PORT,
+						  RIO_INVALID_ROUTE);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE);
+	}
+
+	return 0;
+}
+
+static int
+tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+
+	/* Turn off flat (LUT_512) mode */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 TSI578_SP_MODE_GLBL, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL,
+				  regval & ~TSI578_SP_MODE_LUT_512);
+	/* Set switch domain base */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  TSI578_GLBL_ROUTE_BASE,
+				  (u32)(sw_domain << 24));
+	return 0;
+}
+
+static int
+tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_GLBL_ROUTE_BASE, &regval);
+
+	*sw_domain = (u8)(regval >> 24);
+
+	return 0;
+}
+
+static int
+tsi57x_em_init(struct rio_dev *rdev)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 regval;
+	int portnum;
+
+	pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
+
+	for (portnum = 0; portnum < 16; portnum++) {
+		/* Make sure that Port-Writes are enabled (for all ports) */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_MODE(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_MODE(portnum),
+				regval & ~TSI578_SP_MODE_PW_DIS);
+
+		/* Clear all pending interrupts */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				&regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				regval & 0x07120214);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_INT_STATUS(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_INT_STATUS(portnum),
+				regval & 0x000700bd);
+
+		/* Enable all interrupts to allow ports to send a port-write */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_CTL_INDEP(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_CTL_INDEP(portnum),
+				regval | 0x000b0000);
+
+		/* Skip next (odd) port if the current port is in x4 mode */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				&regval);
+		if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
+			portnum++;
+	}
+
+	return 0;
+}
+
+static int
+tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 intstat, err_status;
+	int sendcount, checkcount;
+	u8 route_port;
+	u32 regval;
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			&err_status);
+
+	if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
+	    (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+			  RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+		/* Remove any queued packets by locking/unlocking port */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+			&regval);
+		if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval | RIO_PORT_N_CTL_LOCKOUT);
+			udelay(50);
+			rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval);
+		}
+
+		/* Read from link maintenance response register to clear
+		 * valid bit
+		 */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+			&regval);
+
+		/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
+		 * symbol to recover from IES/OES
+		 */
+		sendcount = 3;
+		while (sendcount) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+					  TSI578_SP_CS_TX(portnum), 0x40fc8000);
+			checkcount = 3;
+			while (checkcount--) {
+				udelay(50);
+				rio_mport_read_config_32(
+					mport, destid, hopcount,
+					rdev->phys_efptr +
+						RIO_PORT_N_MNT_RSP_CSR(portnum),
+					&regval);
+				if (regval & RIO_PORT_N_MNT_RSP_RVAL)
+					goto exit_es;
+			}
+
+			sendcount--;
+		}
+	}
+
+exit_es:
+	/* Clear implementation specific error status bits */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 TSI578_SP_INT_STATUS(portnum), &intstat);
+	pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
+		 destid, hopcount, portnum, intstat);
+
+	if (intstat & 0x10000) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_LUT_PEINF(portnum), &regval);
+		regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
+		route_port = rdev->rswitch->route_table[regval];
+		pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
+			rio_name(rdev), portnum, regval);
+		tsi57x_route_add_entry(mport, destid, hopcount,
+				RIO_GLOBAL_TABLE, regval, route_port);
+	}
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  TSI578_SP_INT_STATUS(portnum),
+				  intstat & 0x000700bd);
+
+	return 0;
+}
+
+static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi57x_route_add_entry;
+	rdev->rswitch->get_entry = tsi57x_route_get_entry;
+	rdev->rswitch->clr_table = tsi57x_route_clr_table;
+	rdev->rswitch->set_domain = tsi57x_set_domain;
+	rdev->rswitch->get_domain = tsi57x_get_domain;
+	rdev->rswitch->em_init = tsi57x_em_init;
+	rdev->rswitch->em_handle = tsi57x_em_handler;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init);