pwm: sti: Add support for PWM capture interrupts

Here we're requesting the PWM capture IRQ and supplying the handler that
will be called in the event of an interrupt to handle it.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

1 files changed, 91 insertions, 1 deletions

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 6d3e385..bd753fb 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -91,7 +91,9 @@ struct sti_pwm_chip {
 	struct regmap_field *prescale_low;
 	struct regmap_field *prescale_high;
 	struct regmap_field *pwm_out_en;
+	struct regmap_field *pwm_cpt_en;
 	struct regmap_field *pwm_cpt_int_en;
+	struct regmap_field *pwm_cpt_int_stat;
 	struct pwm_chip chip;
 	struct pwm_device *cur;
 	unsigned long configured;
@@ -311,6 +313,76 @@ static const struct pwm_ops sti_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+static irqreturn_t sti_pwm_interrupt(int irq, void *data)
+{
+	struct sti_pwm_chip *pc = data;
+	struct device *dev = pc->dev;
+	struct sti_cpt_ddata *ddata;
+	int devicenum;
+	unsigned int cpt_int_stat;
+	unsigned int reg;
+	int ret = IRQ_NONE;
+
+	ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
+	if (ret)
+		return ret;
+
+	while (cpt_int_stat) {
+		devicenum = ffs(cpt_int_stat) - 1;
+
+		ddata = pwm_get_chip_data(&pc->chip.pwms[devicenum]);
+
+		/*
+		 * Capture input:
+		 *    _______                   _______
+		 *   |       |                 |       |
+		 * __|       |_________________|       |________
+		 *   ^0      ^1                ^2
+		 *
+		 * Capture start by the first available rising edge
+		 * When a capture event occurs, capture value (CPT_VALx)
+		 * is stored, index incremented, capture edge changed.
+		 *
+		 * After the capture, if the index > 1, we have collected
+		 * the necessary data so we signal the thread waiting for it
+		 * and disable the capture by setting capture edge to none
+		 *
+		 */
+
+		regmap_read(pc->regmap,
+			    PWM_CPT_VAL(devicenum),
+			    &ddata->snapshot[ddata->index]);
+
+		switch (ddata->index) {
+		case 0:
+		case 1:
+			regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), &reg);
+			reg ^= PWM_CPT_EDGE_MASK;
+			regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
+
+			ddata->index++;
+			break;
+		case 2:
+			regmap_write(pc->regmap,
+				     PWM_CPT_EDGE(devicenum),
+				     CPT_EDGE_DISABLED);
+			wake_up(&ddata->wait);
+			break;
+		default:
+			dev_err(dev, "Internal error\n");
+		}
+
+		cpt_int_stat &= ~BIT_MASK(devicenum);
+
+		ret = IRQ_HANDLED;
+	}
+
+	/* Just ACK everything */
+	regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
+
+	return ret;
+}
+
 static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 {
 	struct device *dev = pc->dev;
@@ -351,6 +423,11 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 	if (IS_ERR(pc->pwm_cpt_int_en))
 		return PTR_ERR(pc->pwm_cpt_int_en);
 
+	pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_STAT]);
+	if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
+		return PTR_ERR(pc->pwm_cpt_int_stat);
+
 	return 0;
 }
 
@@ -367,7 +444,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	struct sti_pwm_chip *pc;
 	struct resource *res;
 	unsigned int i;
-	int ret;
+	int irq, ret;
 
 	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc)
@@ -388,6 +465,19 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->regmap))
 		return PTR_ERR(pc->regmap);
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to obtain IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
+			       pdev->name, pc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
 	/*
 	 * Setup PWM data with default values: some values could be replaced
 	 * with specific ones provided from Device Tree.