diff options
| author | Eric Bénard <eric@eukrea.com> | 2014-11-12 23:04:08 +0100 |
|---|---|---|
| committer | Sebastian Reichel <sre@kernel.org> | 2015-01-21 19:46:15 +0100 |
| commit | 9dbf5a28642bb2db57fb5150252e133e19acd33a (patch) | |
| tree | f962376c33a44c2fdc30d5327b243923e21b132f /drivers/power | |
| parent | 19fb8b2df4fa0cae1656ca75b75f4e142f2a7829 (diff) | |
| download | op-kernel-dev-9dbf5a28642bb2db57fb5150252e133e19acd33a.zip op-kernel-dev-9dbf5a28642bb2db57fb5150252e133e19acd33a.tar.gz | |
bq27x00_battery: fix register offset for bq27425
- SOC is at 0x1C so we must add 0x4 as stated in the comment to read the
right value.
- DCAP is at 0x3c so we also must use a value with the right offset to get
the correct design capacity.
Actually testing on a bq27410 which has the same register map as bq27425
(but adds new registers).
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/bq27x00_battery.c | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index a78ac20..baae215 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -76,7 +76,8 @@ /* bq27425 register addresses are same as bq27x00 addresses minus 4 */ #define BQ27425_REG_OFFSET 0x04 -#define BQ27425_REG_SOC 0x18 /* Register address plus offset */ +#define BQ27425_REG_SOC (0x1C + BQ27425_REG_OFFSET) +#define BQ27425_REG_DCAP (0x3C + BQ27425_REG_OFFSET) #define BQ27000_RS 20 /* Resistor sense */ #define BQ27x00_POWER_CONSTANT (256 * 29200 / 1000) @@ -282,9 +283,12 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di) { int ilmd; - if (bq27xxx_is_chip_version_higher(di)) - ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); - else + if (bq27xxx_is_chip_version_higher(di)) { + if (di->chip == BQ27425) + ilmd = bq27x00_read(di, BQ27425_REG_DCAP, false); + else + ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); + } else ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true); if (ilmd < 0) { |
