summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-05-27 10:12:35 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-05-27 10:12:35 -0700
commitea0ca3a843babd50c22dfbb5cf2d9a14df821b2b (patch)
tree0d27fc6d7b9a0a2cdfe29833eb84ee07beac91ab /drivers/power
parent74e6392ca3fd445a775dd42b54d5e42cf1e706e6 (diff)
parent906649de0eacde7a643b5a0750de6207441ad54f (diff)
downloadop-kernel-dev-ea0ca3a843babd50c22dfbb5cf2d9a14df821b2b.zip
op-kernel-dev-ea0ca3a843babd50c22dfbb5cf2d9a14df821b2b.tar.gz
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Kconfig9
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/bq27x00_battery.c11
-rw-r--r--drivers/power/ds2760_battery.c6
-rw-r--r--drivers/power/gpio-charger.c15
-rw-r--r--drivers/power/isp1704_charger.c22
-rw-r--r--drivers/power/max8903_charger.c391
-rw-r--r--drivers/power/test_power.c276
-rw-r--r--drivers/power/z2_battery.c20
9 files changed, 729 insertions, 22 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index dc8c531..e57b50b 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -210,6 +210,15 @@ config CHARGER_ISP1704
Say Y to enable support for USB Charger Detection with
ISP1707/ISP1704 USB transceivers.
+config CHARGER_MAX8903
+ tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+ depends on GENERIC_HARDIRQS
+ help
+ Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+ The driver supports controlling charger-enable and current-limit
+ pins based on the status of charger connections with interrupt
+ handlers.
+
config CHARGER_TWL4030
tristate "OMAP TWL4030 BCI charger driver"
depends on TWL4030_CORE
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8224990..009a90f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -33,5 +33,6 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
+obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 59e68db..bb16f5b 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
* Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
* Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com>
*
* Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
*
@@ -76,7 +77,7 @@ struct bq27x00_reg_cache {
int time_to_empty_avg;
int time_to_full;
int charge_full;
- int charge_counter;
+ int cycle_count;
int capacity;
int flags;
@@ -115,7 +116,7 @@ static enum power_supply_property bq27x00_battery_props[] = {
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_ENERGY_NOW,
};
@@ -267,7 +268,7 @@ static void bq27x00_update(struct bq27x00_device_info *di)
cache.time_to_empty_avg = bq27x00_battery_read_time(di, BQ27x00_REG_TTECP);
cache.time_to_full = bq27x00_battery_read_time(di, BQ27x00_REG_TTF);
cache.charge_full = bq27x00_battery_read_lmd(di);
- cache.charge_counter = bq27x00_battery_read_cyct(di);
+ cache.cycle_count = bq27x00_battery_read_cyct(di);
if (!is_bq27500)
cache.current_now = bq27x00_read(di, BQ27x00_REG_AI, false);
@@ -496,8 +497,8 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
ret = bq27x00_simple_value(di->charge_design_full, val);
break;
- case POWER_SUPPLY_PROP_CHARGE_COUNTER:
- ret = bq27x00_simple_value(di->cache.charge_counter, val);
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ ret = bq27x00_simple_value(di->cache.cycle_count, val);
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
ret = bq27x00_battery_energy(di, val);
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index e534290..f2c9cc3 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -86,7 +86,11 @@ static int rated_capacities[] = {
920, /* NEC */
1440, /* Samsung */
1440, /* BYD */
+#ifdef CONFIG_MACH_H4700
+ 1800, /* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */
+#else
1440, /* Lishen */
+#endif
1440, /* NEC */
2880, /* Samsung */
2880, /* BYD */
@@ -186,7 +190,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
scale[0] = di->full_active_uAh;
for (i = 1; i < 5; i++)
- scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
+ scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i];
di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
di->full_active_uAh *= 1000; /* convert to µAh */
diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index 25b88ac..718f2c5 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -161,12 +161,27 @@ static int __devexit gpio_charger_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpio_charger_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
+
+ power_supply_changed(&gpio_charger->charger);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, NULL, gpio_charger_resume);
+
static struct platform_driver gpio_charger_driver = {
.probe = gpio_charger_probe,
.remove = __devexit_p(gpio_charger_remove),
.driver = {
.name = "gpio-charger",
.owner = THIS_MODULE,
+ .pm = &gpio_charger_pm_ops,
},
};
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 2ad9b14..f6d72b4 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -33,6 +33,7 @@
#include <linux/usb/ulpi.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/power/isp1704_charger.h>
/* Vendor specific Power Control register */
#define ISP1704_PWR_CTRL 0x3d
@@ -71,6 +72,18 @@ struct isp1704_charger {
};
/*
+ * Disable/enable the power from the isp1704 if a function for it
+ * has been provided with platform data.
+ */
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+ struct isp1704_charger_data *board = isp->dev->platform_data;
+
+ if (board->set_power)
+ board->set_power(on);
+}
+
+/*
* Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
* chargers).
*
@@ -222,6 +235,9 @@ static void isp1704_charger_work(struct work_struct *data)
mutex_lock(&lock);
+ if (event != USB_EVENT_NONE)
+ isp1704_charger_set_power(isp, 1);
+
switch (event) {
case USB_EVENT_VBUS:
isp->online = true;
@@ -269,6 +285,8 @@ static void isp1704_charger_work(struct work_struct *data)
*/
if (isp->otg->gadget)
usb_gadget_disconnect(isp->otg->gadget);
+
+ isp1704_charger_set_power(isp, 0);
break;
case USB_EVENT_ENUMERATED:
if (isp->present)
@@ -394,6 +412,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
isp->dev = &pdev->dev;
platform_set_drvdata(pdev, isp);
+ isp1704_charger_set_power(isp, 1);
+
ret = isp1704_test_ulpi(isp);
if (ret < 0)
goto fail1;
@@ -434,6 +454,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
/* Detect charger if VBUS is valid (the cable was already plugged). */
ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+ isp1704_charger_set_power(isp, 0);
if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
isp->event = USB_EVENT_VBUS;
schedule_work(&isp->work);
@@ -459,6 +480,7 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev)
otg_unregister_notifier(isp->otg, &isp->nb);
power_supply_unregister(&isp->psy);
otg_put_transceiver(isp->otg);
+ isp1704_charger_set_power(isp, 0);
kfree(isp);
return 0;
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
new file mode 100644
index 0000000..33ff0e3
--- /dev/null
+++ b/drivers/power/max8903_charger.c
@@ -0,0 +1,391 @@
+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/power/max8903_charger.h>
+
+struct max8903_data {
+ struct max8903_pdata *pdata;
+ struct device *dev;
+ struct power_supply psy;
+ bool fault;
+ bool usb_in;
+ bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+ POWER_SUPPLY_PROP_ONLINE, /* External power source */
+ POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8903_data *data = container_of(psy,
+ struct max8903_data, psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ if (data->pdata->chg) {
+ if (gpio_get_value(data->pdata->chg) == 0)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (data->usb_in || data->ta_in)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 0;
+ if (data->usb_in || data->ta_in)
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ if (data->fault)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool ta_in;
+ enum power_supply_type old_type;
+
+ ta_in = gpio_get_value(pdata->dok) ? false : true;
+
+ if (ta_in == data->ta_in)
+ return IRQ_HANDLED;
+
+ data->ta_in = ta_in;
+
+ /* Set Current-Limit-Mode 1:DC 0:USB */
+ if (pdata->dcm)
+ gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (pdata->cen)
+ gpio_set_value(pdata->cen, ta_in ? 0 :
+ (data->usb_in ? 0 : 1));
+
+ dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy.type;
+
+ if (data->ta_in)
+ data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy.type)
+ power_supply_changed(&data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool usb_in;
+ enum power_supply_type old_type;
+
+ usb_in = gpio_get_value(pdata->uok) ? false : true;
+
+ if (usb_in == data->usb_in)
+ return IRQ_HANDLED;
+
+ data->usb_in = usb_in;
+
+ /* Do not touch Current-Limit-Mode */
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (pdata->cen)
+ gpio_set_value(pdata->cen, usb_in ? 0 :
+ (data->ta_in ? 0 : 1));
+
+ dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy.type;
+
+ if (data->ta_in)
+ data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy.type)
+ power_supply_changed(&data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool fault;
+
+ fault = gpio_get_value(pdata->flt) ? false : true;
+
+ if (fault == data->fault)
+ return IRQ_HANDLED;
+
+ data->fault = fault;
+
+ if (fault)
+ dev_err(data->dev, "Charger suffers a fault and stops.\n");
+ else
+ dev_err(data->dev, "Charger recovered from a fault.\n");
+
+ return IRQ_HANDLED;
+}
+
+static __devinit int max8903_probe(struct platform_device *pdev)
+{
+ struct max8903_data *data;
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+ int gpio;
+ int ta_in = 0;
+ int usb_in = 0;
+
+ data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(dev, "Cannot allocate memory.\n");
+ return -ENOMEM;
+ }
+ data->pdata = pdata;
+ data->dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ dev_err(dev, "No valid power sources.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (pdata->dc_valid) {
+ if (pdata->dok && gpio_is_valid(pdata->dok) &&
+ pdata->dcm && gpio_is_valid(pdata->dcm)) {
+ gpio = pdata->dok; /* PULL_UPed Interrupt */
+ ta_in = gpio_get_value(gpio) ? 0 : 1;
+
+ gpio = pdata->dcm; /* Output */
+ gpio_set_value(gpio, ta_in);
+ } else {
+ dev_err(dev, "When DC is wired, DOK and DCM should"
+ " be wired as well.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ } else {
+ if (pdata->dcm) {
+ if (gpio_is_valid(pdata->dcm))
+ gpio_set_value(pdata->dcm, 0);
+ else {
+ dev_err(dev, "Invalid pin: dcm.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+ }
+
+ if (pdata->usb_valid) {
+ if (pdata->uok && gpio_is_valid(pdata->uok)) {
+ gpio = pdata->uok;
+ usb_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When USB is wired, UOK should be wired."
+ "as well.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->cen) {
+ if (gpio_is_valid(pdata->cen)) {
+ gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+ } else {
+ dev_err(dev, "Invalid pin: cen.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->chg) {
+ if (!gpio_is_valid(pdata->chg)) {
+ dev_err(dev, "Invalid pin: chg.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->flt) {
+ if (!gpio_is_valid(pdata->flt)) {
+ dev_err(dev, "Invalid pin: flt.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->usus) {
+ if (!gpio_is_valid(pdata->usus)) {
+ dev_err(dev, "Invalid pin: usus.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ data->fault = false;
+ data->ta_in = ta_in;
+ data->usb_in = usb_in;
+
+ data->psy.name = "max8903_charger";
+ data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ data->psy.get_property = max8903_get_property;
+ data->psy.properties = max8903_charger_props;
+ data->psy.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ ret = power_supply_register(dev, &data->psy);
+ if (ret) {
+ dev_err(dev, "failed: power supply register.\n");
+ goto err;
+ }
+
+ if (pdata->dc_valid) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->dok),
+ NULL, max8903_dcin,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 DC IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+ gpio_to_irq(pdata->dok), ret);
+ goto err_psy;
+ }
+ }
+
+ if (pdata->usb_valid) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->uok),
+ NULL, max8903_usbin,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 USB IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+ gpio_to_irq(pdata->uok), ret);
+ goto err_dc_irq;
+ }
+ }
+
+ if (pdata->flt) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->flt),
+ NULL, max8903_fault,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 Fault", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+ gpio_to_irq(pdata->flt), ret);
+ goto err_usb_irq;
+ }
+ }
+
+ return 0;
+
+err_usb_irq:
+ if (pdata->usb_valid)
+ free_irq(gpio_to_irq(pdata->uok), data);
+err_dc_irq:
+ if (pdata->dc_valid)
+ free_irq(gpio_to_irq(pdata->dok), data);
+err_psy:
+ power_supply_unregister(&data->psy);
+err:
+ kfree(data);
+ return ret;
+}
+
+static __devexit int max8903_remove(struct platform_device *pdev)
+{
+ struct max8903_data *data = platform_get_drvdata(pdev);
+
+ if (data) {
+ struct max8903_pdata *pdata = data->pdata;
+
+ if (pdata->flt)
+ free_irq(gpio_to_irq(pdata->flt), data);
+ if (pdata->usb_valid)
+ free_irq(gpio_to_irq(pdata->uok), data);
+ if (pdata->dc_valid)
+ free_irq(gpio_to_irq(pdata->dok), data);
+ power_supply_unregister(&data->psy);
+ kfree(data);
+ }
+
+ return 0;
+}
+
+static struct platform_driver max8903_driver = {
+ .probe = max8903_probe,
+ .remove = __devexit_p(max8903_remove),
+ .driver = {
+ .name = "max8903-charger",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init max8903_init(void)
+{
+ return platform_driver_register(&max8903_driver);
+}
+module_init(max8903_init);
+
+static void __exit max8903_exit(void)
+{
+ platform_driver_unregister(&max8903_driver);
+}
+module_exit(max8903_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("max8903-charger");
diff --git a/drivers/power/test_power.c b/drivers/power/test_power.c
index 0cd9f67..b527c93 100644
--- a/drivers/power/test_power.c
+++ b/drivers/power/test_power.c
@@ -3,6 +3,12 @@
*
* Copyright 2010 Anton Vorontsov <cbouatmailru@gmail.com>
*
+ * Dynamic module parameter code from the Virtual Battery Driver
+ * Copyright (C) 2008 Pylone, Inc.
+ * By: Masashi YOKOTA <yokota@pylone.jp>
+ * Originally found here:
+ * http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -15,8 +21,12 @@
#include <linux/delay.h>
#include <linux/vermagic.h>
-static int test_power_ac_online = 1;
-static int test_power_battery_status = POWER_SUPPLY_STATUS_CHARGING;
+static int ac_online = 1;
+static int battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+static int battery_health = POWER_SUPPLY_HEALTH_GOOD;
+static int battery_present = 1; /* true */
+static int battery_technology = POWER_SUPPLY_TECHNOLOGY_LION;
+static int battery_capacity = 50;
static int test_power_get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
@@ -24,7 +34,7 @@ static int test_power_get_ac_property(struct power_supply *psy,
{
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
- val->intval = test_power_ac_online;
+ val->intval = ac_online;
break;
default:
return -EINVAL;
@@ -47,22 +57,30 @@ static int test_power_get_battery_property(struct power_supply *psy,
val->strval = UTS_RELEASE;
break;
case POWER_SUPPLY_PROP_STATUS:
- val->intval = test_power_battery_status;
+ val->intval = battery_status;
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
break;
case POWER_SUPPLY_PROP_HEALTH:
- val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ val->intval = battery_health;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = battery_present;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ val->intval = battery_technology;
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- val->intval = 50;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = battery_capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = 100;
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
@@ -84,9 +102,11 @@ static enum power_supply_property test_power_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
@@ -118,6 +138,7 @@ static struct power_supply test_power_supplies[] = {
},
};
+
static int __init test_power_init(void)
{
int i;
@@ -145,8 +166,8 @@ static void __exit test_power_exit(void)
int i;
/* Let's see how we handle changes... */
- test_power_ac_online = 0;
- test_power_battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ ac_online = 0;
+ battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
power_supply_changed(&test_power_supplies[i]);
pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n",
@@ -158,6 +179,241 @@ static void __exit test_power_exit(void)
}
module_exit(test_power_exit);
+
+
+#define MAX_KEYLENGTH 256
+struct battery_property_map {
+ int value;
+ char const *key;
+};
+
+static struct battery_property_map map_ac_online[] = {
+ { 0, "on" },
+ { 1, "off" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_status[] = {
+ { POWER_SUPPLY_STATUS_CHARGING, "charging" },
+ { POWER_SUPPLY_STATUS_DISCHARGING, "discharging" },
+ { POWER_SUPPLY_STATUS_NOT_CHARGING, "not-charging" },
+ { POWER_SUPPLY_STATUS_FULL, "full" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_health[] = {
+ { POWER_SUPPLY_HEALTH_GOOD, "good" },
+ { POWER_SUPPLY_HEALTH_OVERHEAT, "overheat" },
+ { POWER_SUPPLY_HEALTH_DEAD, "dead" },
+ { POWER_SUPPLY_HEALTH_OVERVOLTAGE, "overvoltage" },
+ { POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, "failure" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_present[] = {
+ { 0, "false" },
+ { 1, "true" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_technology[] = {
+ { POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" },
+ { POWER_SUPPLY_TECHNOLOGY_LION, "LION" },
+ { POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" },
+ { POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" },
+ { POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" },
+ { POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" },
+ { -1, NULL },
+};
+
+
+static int map_get_value(struct battery_property_map *map, const char *key,
+ int def_val)
+{
+ char buf[MAX_KEYLENGTH];
+ int cr;
+
+ strncpy(buf, key, MAX_KEYLENGTH);
+ buf[MAX_KEYLENGTH-1] = '\0';
+
+ cr = strnlen(buf, MAX_KEYLENGTH) - 1;
+ if (buf[cr] == '\n')
+ buf[cr] = '\0';
+
+ while (map->key) {
+ if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0)
+ return map->value;
+ map++;
+ }
+
+ return def_val;
+}
+
+
+static const char *map_get_key(struct battery_property_map *map, int value,
+ const char *def_key)
+{
+ while (map->key) {
+ if (map->value == value)
+ return map->key;
+ map++;
+ }
+
+ return def_key;
+}
+
+static int param_set_ac_online(const char *key, const struct kernel_param *kp)
+{
+ ac_online = map_get_value(map_ac_online, key, ac_online);
+ power_supply_changed(&test_power_supplies[0]);
+ return 0;
+}
+
+static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
+{
+ strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown"));
+ return strlen(buffer);
+}
+
+static int param_set_battery_status(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_status = map_get_value(map_status, key, battery_status);
+ power_supply_changed(&test_power_supplies[1]);
+ return 0;
+}
+
+static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
+{
+ strcpy(buffer, map_get_key(map_status, battery_status, "unknown"));
+ return strlen(buffer);
+}
+
+static int param_set_battery_health(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_health = map_get_value(map_health, key, battery_health);
+ power_supply_changed(&test_power_supplies[1]);
+ return 0;
+}
+
+static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
+{
+ strcpy(buffer, map_get_key(map_health, battery_health, "unknown"));
+ return strlen(buffer);
+}
+
+static int param_set_battery_present(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_present = map_get_value(map_present, key, battery_present);
+ power_supply_changed(&test_power_supplies[0]);
+ return 0;
+}
+
+static int param_get_battery_present(char *buffer,
+ const struct kernel_param *kp)
+{
+ strcpy(buffer, map_get_key(map_present, battery_present, "unknown"));
+ return strlen(buffer);
+}
+
+static int param_set_battery_technology(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_technology = map_get_value(map_technology, key,
+ battery_technology);
+ power_supply_changed(&test_power_supplies[1]);
+ return 0;
+}
+
+static int param_get_battery_technology(char *buffer,
+ const struct kernel_param *kp)
+{
+ strcpy(buffer,
+ map_get_key(map_technology, battery_technology, "unknown"));
+ return strlen(buffer);
+}
+
+static int param_set_battery_capacity(const char *key,
+ const struct kernel_param *kp)
+{
+ int tmp;
+
+ if (1 != sscanf(key, "%d", &tmp))
+ return -EINVAL;
+
+ battery_capacity = tmp;
+ power_supply_changed(&test_power_supplies[1]);
+ return 0;
+}
+
+#define param_get_battery_capacity param_get_int
+
+
+
+static struct kernel_param_ops param_ops_ac_online = {
+ .set = param_set_ac_online,
+ .get = param_get_ac_online,
+};
+
+static struct kernel_param_ops param_ops_battery_status = {
+ .set = param_set_battery_status,
+ .get = param_get_battery_status,
+};
+
+static struct kernel_param_ops param_ops_battery_present = {
+ .set = param_set_battery_present,
+ .get = param_get_battery_present,
+};
+
+static struct kernel_param_ops param_ops_battery_technology = {
+ .set = param_set_battery_technology,
+ .get = param_get_battery_technology,
+};
+
+static struct kernel_param_ops param_ops_battery_health = {
+ .set = param_set_battery_health,
+ .get = param_get_battery_health,
+};
+
+static struct kernel_param_ops param_ops_battery_capacity = {
+ .set = param_set_battery_capacity,
+ .get = param_get_battery_capacity,
+};
+
+
+#define param_check_ac_online(name, p) __param_check(name, p, void);
+#define param_check_battery_status(name, p) __param_check(name, p, void);
+#define param_check_battery_present(name, p) __param_check(name, p, void);
+#define param_check_battery_technology(name, p) __param_check(name, p, void);
+#define param_check_battery_health(name, p) __param_check(name, p, void);
+#define param_check_battery_capacity(name, p) __param_check(name, p, void);
+
+
+module_param(ac_online, ac_online, 0644);
+MODULE_PARM_DESC(ac_online, "AC charging state <on|off>");
+
+module_param(battery_status, battery_status, 0644);
+MODULE_PARM_DESC(battery_status,
+ "battery status <charging|discharging|not-charging|full>");
+
+module_param(battery_present, battery_present, 0644);
+MODULE_PARM_DESC(battery_present,
+ "battery presence state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_technology, battery_technology, 0644);
+MODULE_PARM_DESC(battery_technology,
+ "battery technology <NiMH|LION|LIPO|LiFe|NiCd|LiMn>");
+
+module_param(battery_health, battery_health, 0644);
+MODULE_PARM_DESC(battery_health,
+ "battery health state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_capacity, battery_capacity, 0644);
+MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
+
+
MODULE_DESCRIPTION("Power supply driver for testing");
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index e5ced3a..d119c38 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -271,24 +271,33 @@ static int __devexit z2_batt_remove(struct i2c_client *client)
}
#ifdef CONFIG_PM
-static int z2_batt_suspend(struct i2c_client *client, pm_message_t state)
+static int z2_batt_suspend(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct z2_charger *charger = i2c_get_clientdata(client);
flush_work_sync(&charger->bat_work);
return 0;
}
-static int z2_batt_resume(struct i2c_client *client)
+static int z2_batt_resume(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct z2_charger *charger = i2c_get_clientdata(client);
schedule_work(&charger->bat_work);
return 0;
}
+
+static const struct dev_pm_ops z2_battery_pm_ops = {
+ .suspend = z2_batt_suspend,
+ .resume = z2_batt_resume,
+};
+
+#define Z2_BATTERY_PM_OPS (&z2_battery_pm_ops)
+
#else
-#define z2_batt_suspend NULL
-#define z2_batt_resume NULL
+#define Z2_BATTERY_PM_OPS (NULL)
#endif
static const struct i2c_device_id z2_batt_id[] = {
@@ -301,11 +310,10 @@ static struct i2c_driver z2_batt_driver = {
.driver = {
.name = "z2-battery",
.owner = THIS_MODULE,
+ .pm = Z2_BATTERY_PM_OPS
},
.probe = z2_batt_probe,
.remove = z2_batt_remove,
- .suspend = z2_batt_suspend,
- .resume = z2_batt_resume,
.id_table = z2_batt_id,
};
OpenPOWER on IntegriCloud