summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorNicolas Guion <nicolas.guion@stericsson.com>2012-05-23 15:59:43 +0200
committerLee Jones <lee.jones@linaro.org>2013-01-23 14:39:17 +0000
commitb016322293c7e3b7efb1835603d149c03d00b0df (patch)
treedbbff0317c7660f86d1fbe91886adef5f1ac4334 /drivers/power
parentc9ade0fca3f7939194677353097b16c9795df46b (diff)
downloadop-kernel-dev-b016322293c7e3b7efb1835603d149c03d00b0df.zip
op-kernel-dev-b016322293c7e3b7efb1835603d149c03d00b0df.tar.gz
ab8500-charger: Add support for autopower on AB8505 and AB9540
Accessing autopower register fails on the AB8505 and ab9540 as the fallback software control register has moved. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Reviewed-by: Nicolas GUION <nicolas.guion@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/ab8500_charger.c52
1 files changed, 35 insertions, 17 deletions
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index d834566..da965ee 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -95,6 +95,8 @@
#define CHG_WD_INTERVAL (60 * HZ)
+#define AB8500_SW_CONTROL_FALLBACK 0x03
+
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
USB_STAT_NOT_CONFIGURED,
@@ -312,42 +314,58 @@ static enum power_supply_property ab8500_charger_usb_props[] = {
static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
bool fallback)
{
+ u8 val;
u8 reg;
+ u8 bank;
+ u8 bit;
int ret;
dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
+ if (is_ab8500(di->parent)) {
+ bank = 0x15;
+ reg = 0x0;
+ bit = 3;
+ } else {
+ bank = AB8500_SYS_CTRL1_BLOCK;
+ reg = AB8500_SW_CONTROL_FALLBACK;
+ bit = 0;
+ }
+
/* read the register containing fallback bit */
- ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
+ ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%d read failed\n", __LINE__);
return;
}
- /* enable the OPT emulation registers */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+ if (is_ab8500(di->parent)) {
+ /* enable the OPT emulation registers */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ goto disable_otp;
+ }
}
if (fallback)
- reg |= 0x8;
+ val |= (1 << bit);
else
- reg &= ~0x8;
+ val &= ~(1 << bit);
/* write back the changed fallback bit value to register */
- ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+ ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
if (ret) {
dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
}
- /* disable the set OTP registers again */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+disable_otp:
+ if (is_ab8500(di->parent)) {
+ /* disable the set OTP registers again */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ }
}
}
OpenPOWER on IntegriCloud