summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-20 10:19:07 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-20 10:19:07 -0800
commit5a1203914a637b642442a861cf462d16401548e1 (patch)
tree894ea523ad45686b9103410f7daeb3a8e670553a /drivers/power
parentc560dc8793ecf4c3bb4ba6e7b8cae8a64486d96b (diff)
parentac6324e7021dfa917ce4f9a836318c3e46fbb84e (diff)
downloadop-kernel-dev-5a1203914a637b642442a861cf462d16401548e1.zip
op-kernel-dev-5a1203914a637b642442a861cf462d16401548e1.tar.gz
Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6
Pull battery updates from Anton Vorontsov: "Four new drivers: - goldfish_battery: This is Android Emulator battery driver. Originally from Google, but Intel folks reshaped it for mainline - pm2301_charger: A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500 battery management core - qnap-poweroff: The driver adds poweroff functionality for QNAP NAS boxes - restart-poweroff: A generic driver that implements 'power off by restarting'. The actual poweroff functionality is implemented through a bootloader, so Linux' task is just to restart the box. The driver is useful on Buffalo Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on submitting the driver (as well as qnap-poweroff above). Additionally: - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing internal ST-Ericsson development tree with the mainline. Lee Jones @ Linaro worked on compilation and reshaping these series. - New health properties for the power supplies: "Watchdog timer expire" and "Safety timer expire" - As usual, a bunch of fixes/cleanups here and there" * tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits) bq2415x_charger: Add support for offline and 100mA mode generic-adc-battery: Fix forever loop in gab_remove() goldfish_battery: Add missing GENERIC_HARDIRQS dependency da9030_battery: Include notifier.h bq27x00_battery: Fix reporting battery temperature power/reset: Remove newly introduced __dev* annotations lp8727_charger: Small cleanup in naming ab8500_btemp: Demote initcall sequence ds2782_battery: Add power_supply_changed() calls for proper uevent support power: Add battery driver for goldfish emulator u8500-charger: Delay for USB enumeration ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures ab8500-charger: Do not touch VBUSOVV bits ab8500-fg: Use correct battery charge full design pm2301: LPN mode control support pm2301: Enable vbat low monitoring ab8500-bm: Flush all work queues before suspending ab8500-fg: Go to INIT_RECOVERY when charger removed ab8500-charger: Add support for autopower on AB8505 and AB9540 abx500-chargalg: Add new sysfs interface to get current charge status ... Fix up fairly straightforward conflicts in the ab8500 driver. But since it seems to be ARM-specific, I can't even compile-test the result..
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/88pm860x_battery.c13
-rw-r--r--drivers/power/Kconfig14
-rw-r--r--drivers/power/Makefile4
-rw-r--r--drivers/power/ab8500_bmdata.c524
-rw-r--r--drivers/power/ab8500_btemp.c192
-rw-r--r--drivers/power/ab8500_charger.c1067
-rw-r--r--drivers/power/ab8500_fg.c447
-rw-r--r--drivers/power/abx500_chargalg.c204
-rw-r--r--drivers/power/bq2415x_charger.c54
-rw-r--r--drivers/power/bq27x00_battery.c12
-rw-r--r--drivers/power/charger-manager.c310
-rw-r--r--drivers/power/da9030_battery.c1
-rw-r--r--drivers/power/da9052-battery.c2
-rw-r--r--drivers/power/ds2782_battery.c69
-rw-r--r--drivers/power/generic-adc-battery.c16
-rw-r--r--drivers/power/goldfish_battery.c236
-rw-r--r--drivers/power/lp8727_charger.c8
-rw-r--r--drivers/power/lp8788-charger.c17
-rw-r--r--drivers/power/max17040_battery.c4
-rw-r--r--drivers/power/pm2301_charger.c1088
-rw-r--r--drivers/power/pm2301_charger.h513
-rw-r--r--drivers/power/power_supply_sysfs.c3
-rw-r--r--drivers/power/reset/Kconfig17
-rw-r--r--drivers/power/reset/Makefile2
-rw-r--r--drivers/power/reset/qnap-poweroff.c116
-rw-r--r--drivers/power/reset/restart-poweroff.c65
26 files changed, 4044 insertions, 954 deletions
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
index 8bc80b0..d338c1c 100644
--- a/drivers/power/88pm860x_battery.c
+++ b/drivers/power/88pm860x_battery.c
@@ -915,15 +915,13 @@ static int pm860x_battery_probe(struct platform_device *pdev)
info->irq_cc = platform_get_irq(pdev, 0);
if (info->irq_cc <= 0) {
dev_err(&pdev->dev, "No IRQ resource!\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
info->irq_batt = platform_get_irq(pdev, 1);
if (info->irq_batt <= 0) {
dev_err(&pdev->dev, "No IRQ resource!\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
info->chip = chip;
@@ -957,7 +955,7 @@ static int pm860x_battery_probe(struct platform_device *pdev)
ret = power_supply_register(&pdev->dev, &info->battery);
if (ret)
- goto out;
+ return ret;
info->battery.dev->parent = &pdev->dev;
ret = request_threaded_irq(info->irq_cc, NULL,
@@ -984,8 +982,6 @@ out_coulomb:
free_irq(info->irq_cc, info);
out_reg:
power_supply_unregister(&info->battery);
-out:
- kfree(info);
return ret;
}
@@ -993,10 +989,9 @@ static int pm860x_battery_remove(struct platform_device *pdev)
{
struct pm860x_battery_info *info = platform_get_drvdata(pdev);
- power_supply_unregister(&info->battery);
free_irq(info->irq_batt, info);
free_irq(info->irq_cc, info);
- kfree(info);
+ power_supply_unregister(&info->battery);
platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9f45e2f..9e00c38 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -346,6 +346,20 @@ config AB8500_BM
help
Say Y to include support for AB8500 battery management.
+config BATTERY_GOLDFISH
+ tristate "Goldfish battery driver"
+ depends on GENERIC_HARDIRQS
+ help
+ Say Y to enable support for the battery and AC power in the
+ Goldfish emulator.
+
+config CHARGER_PM2301
+ bool "PM2301 Battery Charger Driver"
+ depends on AB8500_BM
+ help
+ Say Y to include support for PM2301 charger driver.
+ Depends on AB8500 battery management core.
+
source "drivers/power/reset/Kconfig"
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 22c8913..3f66436 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
+obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
@@ -38,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o
obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
+obj-$(CONFIG_CHARGER_PM2301) += pm2301_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index f034ae4..7a96c06 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -182,206 +182,206 @@ static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
};
static struct abx500_battery_type bat_type_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 53407,
- .resis_low = 12500,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
- .r_to_t_tbl = temp_tbl_A_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
- .v_to_cap_tbl = cap_tbl_A_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+ .r_to_t_tbl = temp_tbl_A_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+ .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 200000,
- .resis_low = 82869,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
- .r_to_t_tbl = temp_tbl_B_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
- .v_to_cap_tbl = cap_tbl_B_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 200000,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+ .r_to_t_tbl = temp_tbl_B_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+ .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static struct abx500_battery_type bat_type_ext_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
/*
* These are the batteries that doesn't have an internal NTC resistor to measure
* its temperature. The temperature in this case is measure with a NTC placed
* near the battery but on the PCB.
*/
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 76000,
- .resis_low = 53000,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 30000,
- .resis_low = 10000,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 95000,
- .resis_low = 76001,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static const struct abx500_bm_capacity_levels cap_levels = {
@@ -405,8 +405,8 @@ static const struct abx500_fg_parameters fg = {
.lowbat_threshold = 3100,
.battok_falling_th_sel0 = 2860,
.battok_raising_th_sel1 = 2860,
+ .maint_thres = 95,
.user_cap_limit = 15,
- .maint_thres = 97,
};
static const struct abx500_maxim_parameters maxi_params = {
@@ -424,96 +424,84 @@ static const struct abx500_bm_charger_parameters chg = {
};
struct abx500_bm_data ab8500_bm_data = {
- .temp_under = 3,
- .temp_low = 8,
- .temp_high = 43,
- .temp_over = 48,
- .main_safety_tmr_h = 4,
- .temp_interval_chg = 20,
- .temp_interval_nochg = 120,
- .usb_safety_tmr_h = 4,
- .bkup_bat_v = BUP_VCH_SEL_2P6V,
- .bkup_bat_i = BUP_ICH_SEL_150UA,
- .no_maintenance = false,
- .adc_therm = ABx500_ADC_THERM_BATCTRL,
- .chg_unknown_bat = false,
- .enable_overshoot = false,
- .fg_res = 100,
- .cap_levels = &cap_levels,
- .bat_type = bat_type_thermistor,
- .n_btypes = 3,
- .batt_id = 0,
- .interval_charging = 5,
- .interval_not_charging = 120,
- .temp_hysteresis = 3,
- .gnd_lift_resistance = 34,
- .maxi = &maxi_params,
- .chg_params = &chg,
- .fg_params = &fg,
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .capacity_scaling = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = 3,
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
};
-int bmdevs_of_probe(struct device *dev, struct device_node *np,
- struct abx500_bm_data **battery)
+int ab8500_bm_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data *bm)
{
- struct abx500_battery_type *btype;
- struct device_node *np_bat_supply;
- struct abx500_bm_data *bat;
+ struct batres_vs_temp *tmp_batres_tbl;
+ struct device_node *battery_node;
const char *btech;
- char bat_tech[8];
- int i, thermistor;
-
- *battery = &ab8500_bm_data;
+ int i;
/* get phandle to 'battery-info' node */
- np_bat_supply = of_parse_phandle(np, "battery", 0);
- if (!np_bat_supply) {
- dev_err(dev, "missing property battery\n");
+ battery_node = of_parse_phandle(np, "battery", 0);
+ if (!battery_node) {
+ dev_err(dev, "battery node or reference missing\n");
return -EINVAL;
}
- if (of_property_read_bool(np_bat_supply,
- "thermistor-on-batctrl"))
- thermistor = NTC_INTERNAL;
- else
- thermistor = NTC_EXTERNAL;
- bat = *battery;
- if (thermistor == NTC_EXTERNAL) {
- bat->n_btypes = 4;
- bat->bat_type = bat_type_ext_thermistor;
- bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
- }
- btech = of_get_property(np_bat_supply,
- "stericsson,battery-type", NULL);
+ btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
if (!btech) {
dev_warn(dev, "missing property battery-name/type\n");
- strcpy(bat_tech, "UNKNOWN");
- } else {
- strcpy(bat_tech, btech);
+ return -EINVAL;
}
- if (strncmp(bat_tech, "LION", 4) == 0) {
- bat->no_maintenance = true;
- bat->chg_unknown_bat = true;
- bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
- bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
- bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
- bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
- bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ if (strncmp(btech, "LION", 4) == 0) {
+ bm->no_maintenance = true;
+ bm->chg_unknown_bat = true;
+ bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95;
+ bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
}
- /* select the battery resolution table */
- for (i = 0; i < bat->n_btypes; ++i) {
- btype = (bat->bat_type + i);
- if (thermistor == NTC_EXTERNAL) {
- btype->batres_tbl =
- temp_to_batres_tbl_ext_thermistor;
- } else if (strncmp(bat_tech, "LION", 4) == 0) {
- btype->batres_tbl =
- temp_to_batres_tbl_9100;
- } else {
- btype->batres_tbl =
- temp_to_batres_tbl_thermistor;
- }
+
+ if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+ if (strncmp(btech, "LION", 4) == 0)
+ tmp_batres_tbl = temp_to_batres_tbl_9100;
+ else
+ tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+ } else {
+ bm->n_btypes = 4;
+ bm->bat_type = bat_type_ext_thermistor;
+ bm->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
}
- of_node_put(np_bat_supply);
+
+ /* select the battery resolution table */
+ for (i = 0; i < bm->n_btypes; ++i)
+ bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+ of_node_put(battery_node);
+
return 0;
}
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 20e2a7d..0768906 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -39,6 +39,9 @@
#define BTEMP_BATCTRL_CURR_SRC_7UA 7
#define BTEMP_BATCTRL_CURR_SRC_20UA 20
+#define BTEMP_BATCTRL_CURR_SRC_16UA 16
+#define BTEMP_BATCTRL_CURR_SRC_18UA 18
+
#define to_ab8500_btemp_device_info(x) container_of((x), \
struct ab8500_btemp, btemp_psy);
@@ -78,12 +81,13 @@ struct ab8500_btemp_ranges {
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_ranges: Battery temperature range structure
* @btemp_wq: Work queue for measuring the temperature periodically
* @btemp_periodic_work: Work for measuring the temperature periodically
+ * @initialized: True if battery id read.
*/
struct ab8500_btemp {
struct device *dev;
@@ -94,12 +98,13 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
struct ab8500_btemp_ranges btemp_ranges;
struct workqueue_struct *btemp_wq;
struct delayed_work btemp_periodic_work;
+ bool initialized;
};
/* BTEMP power supply properties */
@@ -147,13 +152,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
return (450000 * (v_batctrl)) / (1800 - v_batctrl);
}
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
* source to calculate the resistance, 7uA or 20uA
*/
rbs = (v_batctrl * 1000
- - di->bat->gnd_lift_resistance * inst_curr)
+ - di->bm->gnd_lift_resistance * inst_curr)
/ di->curr_source;
} else {
/*
@@ -209,11 +214,19 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
return 0;
/* Only do this for batteries with internal NTC */
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
- if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
- curr = BAT_CTRL_7U_ENA;
- else
- curr = BAT_CTRL_20U_ENA;
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
+
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
+ curr = BAT_CTRL_16U_ENA;
+ else
+ curr = BAT_CTRL_18U_ENA;
+ } else {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+ curr = BAT_CTRL_7U_ENA;
+ else
+ curr = BAT_CTRL_20U_ENA;
+ }
dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
@@ -241,14 +254,25 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
__func__);
goto disable_curr_source;
}
- } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
+ } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
- BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
- ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -290,11 +314,20 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
* if we got an error above
*/
disable_curr_source:
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -372,13 +405,10 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
return ret;
}
- /*
- * Since there is no interrupt when current measurement is done,
- * loop for over 250ms (250ms is one sample conversion time
- * with 32.768 Khz RTC clock). Note that a stop time must be set
- * since the ab8500_btemp_read_batctrl_voltage call can block and
- * take an unknown amount of time to complete.
- */
+ do {
+ msleep(20);
+ } while (!ab8500_fg_inst_curr_started(di->fg));
+
i = 0;
do {
@@ -457,9 +487,9 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
int rbat, rntc, vntc;
u8 id;
- id = di->bat->batt_id;
+ id = di->bm->batt_id;
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
id != BATTERY_UNKNOWN) {
rbat = ab8500_btemp_get_batctrl_res(di);
@@ -474,8 +504,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
}
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rbat);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rbat);
} else {
vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
if (vntc < 0) {
@@ -491,8 +521,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
rntc = 230000 * vntc / (VTVOUT_V - vntc);
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rntc);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rntc);
prev = temp;
}
dev_dbg(di->dev, "Battery temperature is %d\n", temp);
@@ -511,9 +541,12 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
{
int res;
u8 i;
+ if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ else
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->bat->batt_id = BATTERY_UNKNOWN;
+ di->bm->batt_id = BATTERY_UNKNOWN;
res = ab8500_btemp_get_batctrl_res(di);
if (res < 0) {
@@ -522,23 +555,23 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
}
/* BATTERY_UNKNOWN is defined on position 0, skip it! */
- for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) {
- if ((res <= di->bat->bat_type[i].resis_high) &&
- (res >= di->bat->bat_type[i].resis_low)) {
+ for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) {
+ if ((res <= di->bm->bat_type[i].resis_high) &&
+ (res >= di->bm->bat_type[i].resis_low)) {
dev_dbg(di->dev, "Battery detected on %s"
" low %d < res %d < high: %d"
" index: %d\n",
- di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ?
+ di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ?
"BATCTRL" : "BATTEMP",
- di->bat->bat_type[i].resis_low, res,
- di->bat->bat_type[i].resis_high, i);
+ di->bm->bat_type[i].resis_low, res,
+ di->bm->bat_type[i].resis_high, i);
- di->bat->batt_id = i;
+ di->bm->batt_id = i;
break;
}
}
- if (di->bat->batt_id == BATTERY_UNKNOWN) {
+ if (di->bm->batt_id == BATTERY_UNKNOWN) {
dev_warn(di->dev, "Battery identified as unknown"
", resistance %d Ohm\n", res);
return -ENXIO;
@@ -548,13 +581,18 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
* We only have to change current source if the
* detected type is Type 1, else we use the 7uA source
*/
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
- di->bat->batt_id == 1) {
- dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ di->bm->batt_id == 1) {
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ } else {
+ dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ }
}
- return di->bat->batt_id;
+ return di->bm->batt_id;
}
/**
@@ -569,6 +607,13 @@ static void ab8500_btemp_periodic_work(struct work_struct *work)
struct ab8500_btemp *di = container_of(work,
struct ab8500_btemp, btemp_periodic_work.work);
+ if (!di->initialized) {
+ di->initialized = true;
+ /* Identify the battery */
+ if (ab8500_btemp_id(di) < 0)
+ dev_warn(di->dev, "failed to identify the battery\n");
+ }
+
di->bat_temp = ab8500_btemp_measure_temp(di);
if (di->bat_temp != di->prev_bat_temp) {
@@ -577,9 +622,9 @@ static void ab8500_btemp_periodic_work(struct work_struct *work)
}
if (di->events.ac_conn || di->events.usb_conn)
- interval = di->bat->temp_interval_chg;
+ interval = di->bm->temp_interval_chg;
else
- interval = di->bat->temp_interval_nochg;
+ interval = di->bm->temp_interval_nochg;
/* Schedule a new measurement */
queue_delayed_work(di->btemp_wq,
@@ -616,9 +661,9 @@ static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
- if (is_ab8500_2p0_or_earlier(di->parent)) {
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
dev_dbg(di->dev, "Ignore false btemp low irq"
- " for ABB cut 1.0, 1.1 and 2.0\n");
+ " for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
} else {
dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
@@ -732,30 +777,30 @@ static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
int temp = 0;
/*
- * The BTEMP events are not reliabe on AB8500 cut2.0
+ * The BTEMP events are not reliabe on AB8500 cut3.3
* and prior versions
*/
- if (is_ab8500_2p0_or_earlier(di->parent)) {
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
temp = di->bat_temp * 10;
} else {
if (di->events.btemp_low) {
if (temp > di->btemp_ranges.btemp_low_limit)
- temp = di->btemp_ranges.btemp_low_limit;
+ temp = di->btemp_ranges.btemp_low_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_high) {
if (temp < di->btemp_ranges.btemp_high_limit)
- temp = di->btemp_ranges.btemp_high_limit;
+ temp = di->btemp_ranges.btemp_high_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_lowmed) {
if (temp > di->btemp_ranges.btemp_med_limit)
- temp = di->btemp_ranges.btemp_med_limit;
+ temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_medhigh) {
if (temp < di->btemp_ranges.btemp_med_limit)
- temp = di->btemp_ranges.btemp_med_limit;
+ temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else
@@ -806,7 +851,7 @@ static int ab8500_btemp_get_property(struct power_supply *psy,
val->intval = 1;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = di->bat->bat_type[di->bat->batt_id].name;
+ val->intval = di->bm->bat_type[di->bm->batt_id].name;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = ab8500_btemp_get_temp(di);
@@ -967,6 +1012,7 @@ static char *supply_interface[] = {
static int ab8500_btemp_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
@@ -976,21 +1022,19 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get parent data */
@@ -998,6 +1042,8 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ di->initialized = false;
+
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
@@ -1022,10 +1068,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
ab8500_btemp_periodic_work);
- /* Identify the battery */
- if (ab8500_btemp_id(di) < 0)
- dev_warn(di->dev, "failed to identify the battery\n");
-
/* Set BTEMP thermal limits. Low and Med are fixed */
di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
@@ -1123,7 +1165,7 @@ static void __exit ab8500_btemp_exit(void)
platform_driver_unregister(&ab8500_btemp_driver);
}
-subsys_initcall_sync(ab8500_btemp_init);
+device_initcall(ab8500_btemp_init);
module_exit(ab8500_btemp_exit);
MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 3be9c0e..24b30b7 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -31,6 +31,7 @@
#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/usb/otg.h>
+#include <linux/mutex.h>
/* Charger constants */
#define NO_PW_CONN 0
@@ -54,6 +55,7 @@
#define MAIN_CH_INPUT_CURR_SHIFT 4
#define VBUS_IN_CURR_LIM_SHIFT 4
+#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4
#define LED_INDICATOR_PWM_ENA 0x01
#define LED_INDICATOR_PWM_DIS 0x00
@@ -68,6 +70,11 @@
#define MAIN_CH_NOK 0x01
#define VBUS_DET 0x80
+#define MAIN_CH_STATUS2_MAINCHGDROP 0x80
+#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40
+#define USB_CH_VBUSDROP 0x40
+#define USB_CH_VBUSDETDBNC 0x01
+
/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS 0x78
#define AB8500_STD_HOST_SUSP 0x18
@@ -79,6 +86,17 @@
/* Lowest charger voltage is 3.39V -> 0x4E */
#define LOW_VOLT_REG 0x4E
+/* Step up/down delay in us */
+#define STEP_UDELAY 1000
+
+#define CHARGER_STATUS_POLL 10 /* in ms */
+
+#define CHG_WD_INTERVAL (60 * HZ)
+
+#define AB8500_SW_CONTROL_FALLBACK 0x03
+/* Wait for enumeration before charing in us */
+#define WAIT_ACA_RID_ENUMERATION (5 * 1000)
+
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
USB_STAT_NOT_CONFIGURED,
@@ -97,6 +115,13 @@ enum ab8500_charger_link_status {
USB_STAT_HM_IDGND,
USB_STAT_RESERVED,
USB_STAT_NOT_VALID_LINK,
+ USB_STAT_PHY_EN,
+ USB_STAT_SUP_NO_IDGND_VBUS,
+ USB_STAT_SUP_IDGND_VBUS,
+ USB_STAT_CHARGER_LINE_1,
+ USB_STAT_CARKIT_1,
+ USB_STAT_CARKIT_2,
+ USB_STAT_ACA_DOCK_CHARGER,
};
enum ab8500_usb_state {
@@ -149,6 +174,7 @@ struct ab8500_charger_info {
int charger_voltage;
int cv_active;
bool wd_expired;
+ int charger_current;
};
struct ab8500_charger_event_flags {
@@ -159,12 +185,14 @@ struct ab8500_charger_event_flags {
bool usbchargernotok;
bool chgwdexp;
bool vbus_collapse;
+ bool vbus_drop_end;
};
struct ab8500_charger_usb_state {
- bool usb_changed;
int usb_current;
+ int usb_current_tmp;
enum ab8500_usb_state state;
+ enum ab8500_usb_state state_tmp;
spinlock_t usb_lock;
};
@@ -182,11 +210,17 @@ struct ab8500_charger_usb_state {
* charger is enabled
* @vbat Battery voltage
* @old_vbat Previously measured battery voltage
+ * @usb_device_is_unrecognised USB device is unrecognised by the hardware
* @autopower Indicate if we should have automatic pwron after pwrloss
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
+ * @invalid_charger_detect_state State when forcing AB to use invalid charger
+ * @is_usb_host: Indicate if last detected USB type is host
+ * @is_aca_rid: Incicate if accessory is ACA type
+ * @current_stepping_sessions:
+ * Counter for current stepping sessions
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
* @ac_chg: AC charger power supply
@@ -195,19 +229,28 @@ struct ab8500_charger_usb_state {
* @usb: Structure that holds the USB charger properties
* @regu: Pointer to the struct regulator
* @charger_wq: Work queue for the IRQs and checking HW state
+ * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals
+ * @pm_lock: Lock to prevent system to suspend
* @check_vbat_work Work for checking vbat threshold to adjust vbus current
* @check_hw_failure_work: Work for checking HW state
* @check_usbchgnotok_work: Work for checking USB charger not ok status
* @kick_wd_work: Work for kicking the charger watchdog in case
* of ABB rev 1.* due to the watchog logic bug
+ * @ac_charger_attached_work: Work for checking if AC charger is still
+ * connected
+ * @usb_charger_attached_work: Work for checking if USB charger is still
+ * connected
* @ac_work: Work for checking AC charger connection
* @detect_usb_type_work: Work for detecting the USB type connected
* @usb_link_status_work: Work for checking the new USB link status
* @usb_state_changed_work: Work for checking USB state
+ * @attach_work: Work for detecting USB type
+ * @vbus_drop_end_work: Work for detecting VBUS drop end
* @check_main_thermal_prot_work:
* Work for checking Main thermal status
* @check_usb_thermal_prot_work:
* Work for checking USB thermal status
+ * @charger_attached_mutex: For controlling the wakelock
*/
struct ab8500_charger {
struct device *dev;
@@ -219,11 +262,16 @@ struct ab8500_charger {
bool vddadc_en_usb;
int vbat;
int old_vbat;
+ bool usb_device_is_unrecognised;
bool autopower;
bool autopower_cfg;
+ int invalid_charger_detect_state;
+ bool is_usb_host;
+ int is_aca_rid;
+ atomic_t current_stepping_sessions;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
struct ux500_charger ac_chg;
@@ -232,18 +280,24 @@ struct ab8500_charger {
struct ab8500_charger_info usb;
struct regulator *regu;
struct workqueue_struct *charger_wq;
+ struct mutex usb_ipt_crnt_lock;
struct delayed_work check_vbat_work;
struct delayed_work check_hw_failure_work;
struct delayed_work check_usbchgnotok_work;
struct delayed_work kick_wd_work;
+ struct delayed_work usb_state_changed_work;
+ struct delayed_work attach_work;
+ struct delayed_work ac_charger_attached_work;
+ struct delayed_work usb_charger_attached_work;
+ struct delayed_work vbus_drop_end_work;
struct work_struct ac_work;
struct work_struct detect_usb_type_work;
struct work_struct usb_link_status_work;
- struct work_struct usb_state_changed_work;
struct work_struct check_main_thermal_prot_work;
struct work_struct check_usb_thermal_prot_work;
struct usb_phy *usb_phy;
struct notifier_block nb;
+ struct mutex charger_attached_mutex;
};
/* AC properties */
@@ -267,50 +321,65 @@ static enum power_supply_property ab8500_charger_usb_props[] = {
POWER_SUPPLY_PROP_CURRENT_NOW,
};
-/**
- * ab8500_power_loss_handling - set how we handle powerloss.
- * @di: pointer to the ab8500_charger structure
- *
- * Magic nummbers are from STE HW department.
+/*
+ * Function for enabling and disabling sw fallback mode
+ * should always be disabled when no charger is connected.
*/
-static void ab8500_power_loss_handling(struct ab8500_charger *di)
+static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
+ bool fallback)
{
+ u8 val;
u8 reg;
+ u8 bank;
+ u8 bit;
int ret;
- dev_dbg(di->dev, "Autopower : %d\n", di->autopower);
+ dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
- /* read the autopower register */
- ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+ if (is_ab8500(di->parent)) {
+ bank = 0x15;
+ reg = 0x0;
+ bit = 3;
+ } else {
+ bank = AB8500_SYS_CTRL1_BLOCK;
+ reg = AB8500_SW_CONTROL_FALLBACK;
+ bit = 0;
}
- /* enable the OPT emulation registers */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
+ /* read the register containing fallback bit */
+ ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%d read failed\n", __LINE__);
return;
}
- if (di->autopower)
- reg |= 0x8;
+ if (is_ab8500(di->parent)) {
+ /* enable the OPT emulation registers */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ goto disable_otp;
+ }
+ }
+
+ if (fallback)
+ val |= (1 << bit);
else
- reg &= ~0x8;
+ val &= ~(1 << bit);
- /* write back the changed value to autopower reg */
- ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+ /* write back the changed fallback bit value to register */
+ ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
if (ret) {
dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
}
- /* disable the set OTP registers again */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+disable_otp:
+ if (is_ab8500(di->parent)) {
+ /* disable the set OTP registers again */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ }
}
}
@@ -329,12 +398,12 @@ static void ab8500_power_supply_changed(struct ab8500_charger *di,
!di->ac.charger_connected &&
di->autopower) {
di->autopower = false;
- ab8500_power_loss_handling(di);
+ ab8500_enable_disable_sw_fallback(di, false);
} else if (!di->autopower &&
(di->ac.charger_connected ||
di->usb.charger_connected)) {
di->autopower = true;
- ab8500_power_loss_handling(di);
+ ab8500_enable_disable_sw_fallback(di, true);
}
}
power_supply_changed(psy);
@@ -347,6 +416,19 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
dev_dbg(di->dev, "USB connected:%i\n", connected);
di->usb.charger_connected = connected;
sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
+
+ if (connected) {
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ } else {
+ cancel_delayed_work_sync(&di->usb_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ }
}
}
@@ -500,6 +582,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di)
/**
* ab8500_charger_detect_chargers() - Detect the connected chargers
* @di: pointer to the ab8500_charger structure
+ * @probe: if probe, don't delay and wait for HW
*
* Returns the type of charger connected.
* For USB it will not mean we can actually charge from it
@@ -513,7 +596,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di)
* USB_PW_CONN if the USB power supply is connected
* AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
*/
-static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
{
int result = NO_PW_CONN;
int ret;
@@ -531,13 +614,25 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
result = AC_PW_CONN;
/* Check for USB charger */
+
+ if (!probe) {
+ /*
+ * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
+ * when disconnecting ACA even though no
+ * charger was connected. Try waiting a little
+ * longer than the 100 ms of VBUS_DET_DBNC100...
+ */
+ msleep(110);
+ }
ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
AB8500_CH_USBCH_STAT1_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
-
+ dev_dbg(di->dev,
+ "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
+ val);
if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
result |= USB_PW_CONN;
@@ -554,31 +649,53 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
* Returns error code in case of failure else 0 on success
*/
static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
- enum ab8500_charger_link_status link_status)
+ enum ab8500_charger_link_status link_status)
{
int ret = 0;
+ di->usb_device_is_unrecognised = false;
+
+ /*
+ * Platform only supports USB 2.0.
+ * This means that charging current from USB source
+ * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*
+ * should set USB_CH_IP_CUR_LVL_0P5.
+ */
+
switch (link_status) {
case USB_STAT_STD_HOST_NC:
case USB_STAT_STD_HOST_C_NS:
case USB_STAT_STD_HOST_C_S:
dev_dbg(di->dev, "USB Type - Standard host is "
"detected through USB driver\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS_CHIRP:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
+ break;
case USB_STAT_ACA_RID_C_HS:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
+ di->is_usb_host = false;
+ di->is_aca_rid = 0;
break;
case USB_STAT_ACA_RID_A:
/*
* Dedicated charger level minus maximum current accessory
- * can consume (300mA). Closest level is 1100mA
+ * can consume (900mA). Closest level is 500mA
*/
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1;
+ dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
break;
case USB_STAT_ACA_RID_B:
/*
@@ -586,34 +703,68 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
* 100mA for potential accessory). Closest level is 1300mA
*/
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr);
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
break;
- case USB_STAT_DEDICATED_CHG:
case USB_STAT_HOST_CHG_NM:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_DEDICATED_CHG:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 0;
+ break;
case USB_STAT_ACA_RID_C_HS_CHIRP:
case USB_STAT_ACA_RID_C_NM:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
break;
- case USB_STAT_RESERVED:
- /*
- * This state is used to indicate that VBUS has dropped below
- * the detection level 4 times in a row. This is due to the
- * charger output current is set to high making the charger
- * voltage collapse. This have to be propagated through to
- * chargalg. This is done using the property
- * POWER_SUPPLY_PROP_CURRENT_AVG = 1
- */
- di->flags.vbus_collapse = true;
- dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED "
- "VBUS has collapsed\n");
- ret = -1;
- break;
- case USB_STAT_HM_IDGND:
case USB_STAT_NOT_CONFIGURED:
- case USB_STAT_NOT_VALID_LINK:
+ if (di->vbus_detected) {
+ di->usb_device_is_unrecognised = true;
+ dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ break;
+ }
+ case USB_STAT_HM_IDGND:
dev_err(di->dev, "USB Type - Charging not allowed\n");
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
ret = -ENXIO;
break;
+ case USB_STAT_RESERVED:
+ if (is_ab8500(di->parent)) {
+ di->flags.vbus_collapse = true;
+ dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
+ "VBUS has collapsed\n");
+ ret = -ENXIO;
+ break;
+ }
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev, "USB Type - Charging not allowed\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+ link_status, di->max_usb_in_curr);
+ ret = -ENXIO;
+ break;
+ }
+ break;
+ case USB_STAT_CARKIT_1:
+ case USB_STAT_CARKIT_2:
+ case USB_STAT_ACA_DOCK_CHARGER:
+ case USB_STAT_CHARGER_LINE_1:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr);
+ case USB_STAT_NOT_VALID_LINK:
+ dev_err(di->dev, "USB Type invalid - try charging anyway\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ break;
+
default:
dev_err(di->dev, "USB Type - Unknown\n");
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
@@ -645,8 +796,14 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+ if (is_ab8500(di->parent)) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ } else {
+ if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+ }
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
@@ -682,16 +839,25 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
ret = abx500_get_register_interruptible(di->dev,
AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
&val);
+ dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
+ __func__, val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
+ dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
+ val);
/*
* Until the IT source register is read the UsbLineStatus
* register is not updated, hence doing the same
@@ -936,6 +1102,144 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
}
/**
+ * ab8500_charger_set_current() - set charger current
+ * @di: pointer to the ab8500_charger structure
+ * @ich: charger current, in mA
+ * @reg: select what charger register to set
+ *
+ * Set charger current.
+ * There is no state machine in the AB to step up/down the charger
+ * current to avoid dips and spikes on MAIN, VBUS and VBAT when
+ * charging is started. Instead we need to implement
+ * this charger current step-up/down here.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_current(struct ab8500_charger *di,
+ int ich, int reg)
+{
+ int ret = 0;
+ int auto_curr_index, curr_index, prev_curr_index, shift_value, i;
+ u8 reg_value;
+ u32 step_udelay;
+ bool no_stepping = false;
+
+ atomic_inc(&di->current_stepping_sessions);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ goto exit_set_current;
+ }
+
+ switch (reg) {
+ case AB8500_MCH_IPT_CURLVL_REG:
+ shift_value = MAIN_CH_INPUT_CURR_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(ich);
+ step_udelay = STEP_UDELAY;
+ if (!di->ac.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_USBCH_IPT_CRNTLVL_REG:
+ shift_value = VBUS_IN_CURR_LIM_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_vbus_in_curr_to_regval(ich);
+ step_udelay = STEP_UDELAY * 100;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ goto exit_set_current;
+ }
+ auto_curr_index =
+ reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;
+
+ dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
+ __func__,
+ ab8500_charger_vbus_in_curr_map[auto_curr_index]);
+
+ prev_curr_index = min(prev_curr_index, auto_curr_index);
+
+ if (!di->usb.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_CH_OPT_CRNTLVL_REG:
+ shift_value = 0;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(ich);
+ step_udelay = STEP_UDELAY;
+ if (curr_index && (curr_index - prev_curr_index) > 1)
+ step_udelay *= 100;
+
+ if (!di->usb.charger_connected && !di->ac.charger_connected)
+ no_stepping = true;
+
+ break;
+ default:
+ dev_err(di->dev, "%s current register not valid\n", __func__);
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ if (curr_index < 0) {
+ dev_err(di->dev, "requested current limit out-of-range\n");
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ /* only update current if it's been changed */
+ if (prev_curr_index == curr_index) {
+ dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
+ __func__, reg);
+ ret = 0;
+ goto exit_set_current;
+ }
+
+ dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n",
+ __func__, ich, reg);
+
+ if (no_stepping) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, (u8)curr_index << shift_value);
+ if (ret)
+ dev_err(di->dev, "%s write failed\n", __func__);
+ } else if (prev_curr_index > curr_index) {
+ for (i = prev_curr_index - 1; i >= curr_index; i--) {
+ dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
+ (u8) i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+ }
+ } else {
+ for (i = prev_curr_index + 1; i <= curr_index; i++) {
+ dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
+ (u8)i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+ }
+ }
+
+exit_set_current:
+ atomic_dec(&di->current_stepping_sessions);
+
+ return ret;
+}
+
+/**
* ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
* @di: pointer to the ab8500_charger structure
* @ich_in: charger input current limit
@@ -946,12 +1250,11 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
int ich_in)
{
- int ret;
- int input_curr_index;
int min_value;
+ int ret;
/* We should always use to lowest current limit */
- min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
+ min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
switch (min_value) {
case 100:
@@ -966,22 +1269,47 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
break;
}
- input_curr_index = ab8500_vbus_in_curr_to_regval(min_value);
- if (input_curr_index < 0) {
- dev_err(di->dev, "VBUS input current limit too high\n");
- return -ENXIO;
- }
+ dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value);
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_USBCH_IPT_CRNTLVL_REG,
- input_curr_index << VBUS_IN_CURR_LIM_SHIFT);
- if (ret)
- dev_err(di->dev, "%s write failed\n", __func__);
+ mutex_lock(&di->usb_ipt_crnt_lock);
+ ret = ab8500_charger_set_current(di, min_value,
+ AB8500_USBCH_IPT_CRNTLVL_REG);
+ mutex_unlock(&di->usb_ipt_crnt_lock);
return ret;
}
/**
+ * ab8500_charger_set_main_in_curr() - set main charger input current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: input charger current, in mA
+ *
+ * Set main charger input current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ return ab8500_charger_set_current(di, ich_in,
+ AB8500_MCH_IPT_CURLVL_REG);
+}
+
+/**
+ * ab8500_charger_set_output_curr() - set charger output current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_out: output charger current, in mA
+ *
+ * Set charger output current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
+ int ich_out)
+{
+ return ab8500_charger_set_current(di, ich_out,
+ AB8500_CH_OPT_CRNTLVL_REG);
+}
+
+/**
* ab8500_charger_led_en() - turn on/off chargign led
* @di: pointer to the ab8500_charger structure
* @on: flag to turn on/off the chargign led
@@ -1074,7 +1402,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
volt_index = ab8500_voltage_to_regval(vset);
curr_index = ab8500_current_to_regval(iset);
input_curr_index = ab8500_current_to_regval(
- di->bat->chg_params->ac_curr_max);
+ di->bm->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -1090,23 +1418,24 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
return ret;
}
/* MainChInputCurr: current that can be drawn from the charger*/
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_MCH_IPT_CURLVL_REG,
- input_curr_index << MAIN_CH_INPUT_CURR_SHIFT);
+ ret = ab8500_charger_set_main_in_curr(di,
+ di->bm->chg_params->ac_curr_max);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
+ __func__);
return ret;
}
/* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, iset);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
/* Enable Main Charger */
@@ -1158,12 +1487,11 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
return ret;
}
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1);
+ ret = ab8500_charger_set_output_curr(di, 0);
if (ret) {
- dev_err(di->dev,
- "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
} else {
@@ -1259,24 +1587,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
dev_err(di->dev, "%s write failed\n", __func__);
return ret;
}
- /* USBChInputCurr: current that can be drawn from the usb */
- ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
- if (ret) {
- dev_err(di->dev, "setting USBChInputCurr failed\n");
- return ret;
- }
- /* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
- if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
- return ret;
- }
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
/* Enable USB Charger */
+ dev_dbg(di->dev,
+ "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
if (ret) {
@@ -1289,11 +1606,29 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
if (ret < 0)
dev_err(di->dev, "failed to enable LED\n");
+ di->usb.charger_online = 1;
+
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, ich_out);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+
queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
- di->usb.charger_online = 1;
} else {
/* Disable USB charging */
+ dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
ret = abx500_set_register_interruptible(di->dev,
AB8500_CHARGER,
AB8500_USBCH_CTRL1_REG, 0);
@@ -1306,7 +1641,21 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
ret = ab8500_charger_led_en(di, false);
if (ret < 0)
dev_err(di->dev, "failed to disable LED\n");
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to reset ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
di->usb.charger_online = 0;
di->usb.wd_expired = false;
@@ -1366,7 +1715,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
int ich_out)
{
int ret;
- int curr_index;
struct ab8500_charger *di;
if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
@@ -1376,18 +1724,11 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
else
return -ENXIO;
- curr_index = ab8500_current_to_regval(ich_out);
- if (curr_index < 0) {
- dev_err(di->dev,
- "Charger current too high, "
- "charging not started\n");
- return -ENXIO;
- }
-
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, ich_out);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
@@ -1597,7 +1938,7 @@ static void ab8500_charger_ac_work(struct work_struct *work)
* synchronously, we have the check if the main charger is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
+ ret = ab8500_charger_detect_chargers(di, false);
if (ret < 0)
return;
@@ -1612,6 +1953,84 @@ static void ab8500_charger_ac_work(struct work_struct *work)
sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
}
+static void ab8500_charger_usb_attached_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ usb_charger_attached_work.work);
+ int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+ if ((statval & usbch) != usbch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+}
+
+static void ab8500_charger_ac_attached_work(struct work_struct *work)
+{
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ ac_charger_attached_work.work);
+ int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
+ MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_STATUS2_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+
+ if ((statval & mainch) != mainch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
+ queue_work(di->charger_wq, &di->ac_work);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+}
+
/**
* ab8500_charger_detect_usb_type_work() - work to detect USB type
* @work: Pointer to the work_struct structure
@@ -1630,16 +2049,18 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
* synchronously, we have the check if is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
+ ret = ab8500_charger_detect_chargers(di, false);
if (ret < 0)
return;
if (!(ret & USB_PW_CONN)) {
- di->vbus_detected = 0;
+ dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
+ di->vbus_detected = false;
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
} else {
- di->vbus_detected = 1;
+ dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
+ di->vbus_detected = true;
if (is_ab8500_1p1_or_earlier(di->parent)) {
ret = ab8500_charger_detect_usb_type(di);
@@ -1649,7 +2070,8 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
&di->usb_chg.psy);
}
} else {
- /* For ABB cut2.0 and onwards we have an IRQ,
+ /*
+ * For ABB cut2.0 and onwards we have an IRQ,
* USB_LINK_STATUS that will be triggered when the USB
* link status changes. The exception is USB connected
* during startup. Then we don't get a
@@ -1670,6 +2092,29 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
}
/**
+ * ab8500_charger_usb_link_attach_work() - work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+ struct ab8500_charger *di =
+ container_of(work, struct ab8500_charger, attach_work.work);
+ int ret;
+
+ /* Update maximum input current if USB enumeration is not detected */
+ if (!di->usb.charger_online) {
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret)
+ return;
+ }
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
* ab8500_charger_usb_link_status_work() - work to detect USB type
* @work: pointer to the work_struct structure
*
@@ -1677,7 +2122,9 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
*/
static void ab8500_charger_usb_link_status_work(struct work_struct *work)
{
+ int detected_chargers;
int ret;
+ u8 val;
struct ab8500_charger *di = container_of(work,
struct ab8500_charger, usb_link_status_work);
@@ -1687,31 +2134,95 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
* synchronously, we have the check if is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
- if (ret < 0)
+ detected_chargers = ab8500_charger_detect_chargers(di, false);
+ if (detected_chargers < 0)
return;
- if (!(ret & USB_PW_CONN)) {
- di->vbus_detected = 0;
+ /*
+ * Some chargers that breaks the USB spec is
+ * identified as invalid by AB8500 and it refuse
+ * to start the charging process. but by jumping
+ * thru a few hoops it can be forced to start.
+ */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ if (ret >= 0)
+ dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
+ else
+ dev_dbg(di->dev, "Error reading USB link status\n");
+
+ if (detected_chargers & USB_PW_CONN) {
+ if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK &&
+ di->invalid_charger_detect_state == 0) {
+ dev_dbg(di->dev, "Invalid charger detected, state= 0\n");
+ /*Enable charger*/
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01);
+ /*Enable charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
+ AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
+ di->invalid_charger_detect_state = 1;
+ /*exit and wait for new link status interrupt.*/
+ return;
+
+ }
+ if (di->invalid_charger_detect_state == 1) {
+ dev_dbg(di->dev, "Invalid charger detected, state= 1\n");
+ /*Stop charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
+ AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
+ /*Check link status*/
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ dev_dbg(di->dev, "USB link status= 0x%02x\n",
+ (val & AB8500_USB_LINK_STATUS) >> 3);
+ di->invalid_charger_detect_state = 2;
+ }
+ } else {
+ di->invalid_charger_detect_state = 0;
+ }
+
+ if (!(detected_chargers & USB_PW_CONN)) {
+ di->vbus_detected = false;
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else {
- di->vbus_detected = 1;
- ret = ab8500_charger_read_usb_type(di);
- if (!ret) {
- /* Update maximum input current */
- ret = ab8500_charger_set_vbus_in_curr(di,
- di->max_usb_in_curr);
- if (ret)
- return;
+ return;
+ }
- ab8500_charger_set_usb_connected(di, true);
- ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else if (ret == -ENXIO) {
+ dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
+ di->vbus_detected = true;
+ ret = ab8500_charger_read_usb_type(di);
+ if (ret) {
+ if (ret == -ENXIO) {
/* No valid charger type detected */
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
}
+ return;
+ }
+
+ if (di->usb_device_is_unrecognised) {
+ dev_dbg(di->dev,
+ "Potential Legacy Charger device. "
+ "Delay work for %d msec for USB enum "
+ "to finish",
+ WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else if (di->is_aca_rid == 1) {
+ /* Only wait once */
+ di->is_aca_rid++;
+ dev_dbg(di->dev,
+ "%s Wait %d msec for USB enum to finish",
+ __func__, WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else {
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ 0);
}
}
@@ -1721,24 +2232,20 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
unsigned long flags;
struct ab8500_charger *di = container_of(work,
- struct ab8500_charger, usb_state_changed_work);
+ struct ab8500_charger, usb_state_changed_work.work);
- if (!di->vbus_detected)
+ if (!di->vbus_detected) {
+ dev_dbg(di->dev,
+ "%s !di->vbus_detected\n",
+ __func__);
return;
+ }
spin_lock_irqsave(&di->usb_state.usb_lock, flags);
- di->usb_state.usb_changed = false;
+ di->usb_state.state = di->usb_state.state_tmp;
+ di->usb_state.usb_current = di->usb_state.usb_current_tmp;
spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
- /*
- * wait for some time until you get updates from the usb stack
- * and negotiations are completed
- */
- msleep(250);
-
- if (di->usb_state.usb_changed)
- return;
-
dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
__func__, di->usb_state.state, di->usb_state.usb_current);
@@ -1892,6 +2399,10 @@ static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
dev_dbg(di->dev, "Main charger unplugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ cancel_delayed_work_sync(&di->ac_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
return IRQ_HANDLED;
}
@@ -1909,6 +2420,11 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
dev_dbg(di->dev, "Main charger plugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
return IRQ_HANDLED;
}
@@ -1971,6 +2487,21 @@ static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
return IRQ_HANDLED;
}
+static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, vbus_drop_end_work.work);
+
+ di->flags.vbus_drop_end = false;
+
+ /* Reset the drop counter */
+ abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
+
+ if (di->usb.charger_connected)
+ ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+}
+
/**
* ab8500_charger_vbusdetf_handler() - VBUS falling detected
* @irq: interrupt number
@@ -1982,6 +2513,7 @@ static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
{
struct ab8500_charger *di = _di;
+ di->vbus_detected = false;
dev_dbg(di->dev, "VBUS falling detected\n");
queue_work(di->charger_wq, &di->detect_usb_type_work);
@@ -2001,6 +2533,7 @@ static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
di->vbus_detected = true;
dev_dbg(di->dev, "VBUS rising detected\n");
+
queue_work(di->charger_wq, &di->detect_usb_type_work);
return IRQ_HANDLED;
@@ -2109,6 +2642,25 @@ static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
}
/**
+ * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS charger drop ended\n");
+ di->flags.vbus_drop_end = true;
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
+ round_jiffies(30 * HZ));
+
+ return IRQ_HANDLED;
+}
+
+/**
* ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
* @irq: interrupt number
* @_di: pointer to the ab8500_charger structure
@@ -2148,6 +2700,7 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy,
union power_supply_propval *val)
{
struct ab8500_charger *di;
+ int ret;
di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
@@ -2169,7 +2722,10 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy,
val->intval = di->ac.charger_connected;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di);
+ ret = ab8500_charger_get_ac_voltage(di);
+ if (ret >= 0)
+ di->ac.charger_voltage = ret;
+ /* On error, use previous value */
val->intval = di->ac.charger_voltage * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2181,7 +2737,10 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy,
val->intval = di->ac.cv_active;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = ab8500_charger_get_ac_current(di) * 1000;
+ ret = ab8500_charger_get_ac_current(di);
+ if (ret >= 0)
+ di->ac.charger_current = ret;
+ val->intval = di->ac.charger_current * 1000;
break;
default:
return -EINVAL;
@@ -2208,6 +2767,7 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy,
union power_supply_propval *val)
{
struct ab8500_charger *di;
+ int ret;
di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
@@ -2231,7 +2791,9 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy,
val->intval = di->usb.charger_connected;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di);
+ ret = ab8500_charger_get_vbus_voltage(di);
+ if (ret >= 0)
+ di->usb.charger_voltage = ret;
val->intval = di->usb.charger_voltage * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2243,7 +2805,10 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy,
val->intval = di->usb.cv_active;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = ab8500_charger_get_usb_current(di) * 1000;
+ ret = ab8500_charger_get_usb_current(di);
+ if (ret >= 0)
+ di->usb.charger_current = ret;
+ val->intval = di->usb.charger_current * 1000;
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
/*
@@ -2293,13 +2858,23 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
}
}
- /* VBUS OVV set to 6.3V and enable automatic current limitiation */
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_USBCH_CTRL2_REG,
- VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+ if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent))
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_AUTO_IN_CURR_LIM_ENA,
+ VBUS_AUTO_IN_CURR_LIM_ENA);
+ else
+ /*
+ * VBUS OVV set to 6.3V and enable automatic current limitation
+ */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
if (ret) {
- dev_err(di->dev, "failed to set VBUS OVV\n");
+ dev_err(di->dev,
+ "failed to set automatic current limitation\n");
goto out;
}
@@ -2355,12 +2930,26 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
goto out;
}
+ /* Set charger watchdog timeout */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_WD_TIMER_REG, WD_TIMER);
+ if (ret) {
+ dev_err(di->dev, "failed to set charger watchdog timeout\n");
+ goto out;
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to disable LED\n");
+ goto out;
+ }
+
/* Backup battery voltage and current */
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
- di->bat->bkup_bat_v |
- di->bat->bkup_bat_i);
+ di->bm->bkup_bat_v |
+ di->bm->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
@@ -2394,6 +2983,7 @@ static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
{"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
{"VBUS_OVV", ab8500_charger_vbusovv_handler},
{"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+ {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
};
static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
@@ -2404,6 +2994,9 @@ static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
enum ab8500_usb_state bm_usb_state;
unsigned mA = *((unsigned *)power);
+ if (!di)
+ return NOTIFY_DONE;
+
if (event != USB_EVENT_VBUS) {
dev_dbg(di->dev, "not a standard host, returning\n");
return NOTIFY_DONE;
@@ -2427,13 +3020,15 @@ static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
__func__, bm_usb_state, mA);
spin_lock(&di->usb_state.usb_lock);
- di->usb_state.usb_changed = true;
+ di->usb_state.state_tmp = bm_usb_state;
+ di->usb_state.usb_current_tmp = mA;
spin_unlock(&di->usb_state.usb_lock);
- di->usb_state.state = bm_usb_state;
- di->usb_state.usb_current = mA;
-
- queue_work(di->charger_wq, &di->usb_state_changed_work);
+ /*
+ * wait for some time until you get updates from the usb stack
+ * and negotiations are completed
+ */
+ queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2);
return NOTIFY_OK;
}
@@ -2473,6 +3068,9 @@ static int ab8500_charger_resume(struct platform_device *pdev)
&di->check_hw_failure_work, 0);
}
+ if (di->flags.vbus_drop_end)
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0);
+
return 0;
}
@@ -2485,6 +3083,23 @@ static int ab8500_charger_suspend(struct platform_device *pdev,
if (delayed_work_pending(&di->check_hw_failure_work))
cancel_delayed_work(&di->check_hw_failure_work);
+ if (delayed_work_pending(&di->vbus_drop_end_work))
+ cancel_delayed_work(&di->vbus_drop_end_work);
+
+ flush_delayed_work(&di->attach_work);
+ flush_delayed_work(&di->usb_charger_attached_work);
+ flush_delayed_work(&di->ac_charger_attached_work);
+ flush_delayed_work(&di->check_usbchgnotok_work);
+ flush_delayed_work(&di->check_vbat_work);
+ flush_delayed_work(&di->kick_wd_work);
+
+ flush_work(&di->usb_link_status_work);
+ flush_work(&di->ac_work);
+ flush_work(&di->detect_usb_type_work);
+
+ if (atomic_read(&di->current_stepping_sessions))
+ return -EAGAIN;
+
return 0;
}
#else
@@ -2509,9 +3124,6 @@ static int ab8500_charger_remove(struct platform_device *pdev)
free_irq(irq, di);
}
- /* disable the regulator */
- regulator_put(di->regu);
-
/* Backup battery voltage and current disable */
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
@@ -2525,8 +3137,12 @@ static int ab8500_charger_remove(struct platform_device *pdev)
destroy_workqueue(di->charger_wq);
flush_scheduled_work();
- power_supply_unregister(&di->usb_chg.psy);
- power_supply_unregister(&di->ac_chg.psy);
+ if(di->usb_chg.enabled)
+ power_supply_unregister(&di->usb_chg.psy);
+#if !defined(CONFIG_CHARGER_PM2301)
+ if(di->ac_chg.enabled)
+ power_supply_unregister(&di->ac_chg.psy);
+#endif
platform_set_drvdata(pdev, NULL);
return 0;
@@ -2541,32 +3157,31 @@ static char *supply_interface[] = {
static int ab8500_charger_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_charger *di;
- int irq, i, charger_status, ret = 0;
+ int irq, i, charger_status, ret = 0, ch_stat;
di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
if (!di) {
dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+ } else
di->autopower_cfg = false;
- }
/* get parent data */
di->dev = &pdev->dev;
@@ -2575,8 +3190,10 @@ static int ab8500_charger_probe(struct platform_device *pdev)
/* initialize lock */
spin_lock_init(&di->usb_state.usb_lock);
+ mutex_init(&di->usb_ipt_crnt_lock);
di->autopower = false;
+ di->invalid_charger_detect_state = 0;
/* AC supply */
/* power_supply base class */
@@ -2595,6 +3212,9 @@ static int ab8500_charger_probe(struct platform_device *pdev)
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
di->ac_chg.max_out_curr = ab8500_charger_current_map[
ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->ac_chg.enabled = di->bm->ac_enabled;
+ di->ac_chg.external = false;
/* USB supply */
/* power_supply base class */
@@ -2613,7 +3233,9 @@ static int ab8500_charger_probe(struct platform_device *pdev)
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
di->usb_chg.max_out_curr = ab8500_charger_current_map[
ARRAY_SIZE(ab8500_charger_current_map) - 1];
-
+ di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->usb_chg.enabled = di->bm->usb_enabled;
+ di->usb_chg.external = false;
/* Create a work queue for the charger */
di->charger_wq =
@@ -2623,12 +3245,19 @@ static int ab8500_charger_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ mutex_init(&di->charger_attached_mutex);
+
/* Init work for HW failure check */
INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
ab8500_charger_check_hw_failure_work);
INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
ab8500_charger_check_usbchargernotok_work);
+ INIT_DELAYED_WORK(&di->ac_charger_attached_work,
+ ab8500_charger_ac_attached_work);
+ INIT_DELAYED_WORK(&di->usb_charger_attached_work,
+ ab8500_charger_usb_attached_work);
+
/*
* For ABB revision 1.0 and 1.1 there is a bug in the watchdog
* logic. That means we have to continously kick the charger
@@ -2644,6 +3273,15 @@ static int ab8500_charger_probe(struct platform_device *pdev)
INIT_DEFERRABLE_WORK(&di->check_vbat_work,
ab8500_charger_check_vbat_work);
+ INIT_DELAYED_WORK(&di->attach_work,
+ ab8500_charger_usb_link_attach_work);
+
+ INIT_DELAYED_WORK(&di->usb_state_changed_work,
+ ab8500_charger_usb_state_changed_work);
+
+ INIT_DELAYED_WORK(&di->vbus_drop_end_work,
+ ab8500_charger_vbus_drop_end_work);
+
/* Init work for charger detection */
INIT_WORK(&di->usb_link_status_work,
ab8500_charger_usb_link_status_work);
@@ -2651,9 +3289,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
INIT_WORK(&di->detect_usb_type_work,
ab8500_charger_detect_usb_type_work);
- INIT_WORK(&di->usb_state_changed_work,
- ab8500_charger_usb_state_changed_work);
-
/* Init work for checking HW status */
INIT_WORK(&di->check_main_thermal_prot_work,
ab8500_charger_check_main_thermal_prot_work);
@@ -2665,7 +3300,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
* is a charger connected to avoid erroneous BTEMP_HIGH/LOW
* interrupts during charging
*/
- di->regu = regulator_get(di->dev, "vddadc");
+ di->regu = devm_regulator_get(di->dev, "vddadc");
if (IS_ERR(di->regu)) {
ret = PTR_ERR(di->regu);
dev_err(di->dev, "failed to get vddadc regulator\n");
@@ -2677,21 +3312,25 @@ static int ab8500_charger_probe(struct platform_device *pdev)
ret = ab8500_charger_init_hw_registers(di);
if (ret) {
dev_err(di->dev, "failed to initialize ABB registers\n");
- goto free_regulator;
+ goto free_charger_wq;
}
/* Register AC charger class */
- ret = power_supply_register(di->dev, &di->ac_chg.psy);
- if (ret) {
- dev_err(di->dev, "failed to register AC charger\n");
- goto free_regulator;
+ if(di->ac_chg.enabled) {
+ ret = power_supply_register(di->dev, &di->ac_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register AC charger\n");
+ goto free_charger_wq;
+ }
}
/* Register USB charger class */
- ret = power_supply_register(di->dev, &di->usb_chg.psy);
- if (ret) {
- dev_err(di->dev, "failed to register USB charger\n");
- goto free_ac;
+ if(di->usb_chg.enabled) {
+ ret = power_supply_register(di->dev, &di->usb_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register USB charger\n");
+ goto free_ac;
+ }
}
di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -2708,7 +3347,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
}
/* Identify the connected charger types during startup */
- charger_status = ab8500_charger_detect_chargers(di);
+ charger_status = ab8500_charger_detect_chargers(di, true);
if (charger_status & AC_PW_CONN) {
di->ac.charger_connected = 1;
di->ac_conn = true;
@@ -2717,7 +3356,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
}
if (charger_status & USB_PW_CONN) {
- dev_dbg(di->dev, "VBUS Detect during startup\n");
di->vbus_detected = true;
di->vbus_detected_start = true;
queue_work(di->charger_wq,
@@ -2742,6 +3380,23 @@ static int ab8500_charger_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, di);
+ mutex_lock(&di->charger_attached_mutex);
+
+ ch_stat = ab8500_charger_detect_chargers(di, false);
+
+ if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+ }
+ if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ }
+
+ mutex_unlock(&di->charger_attached_mutex);
+
return ret;
free_irq:
@@ -2755,11 +3410,11 @@ free_irq:
put_usb_phy:
usb_put_phy(di->usb_phy);
free_usb:
- power_supply_unregister(&di->usb_chg.psy);
+ if(di->usb_chg.enabled)
+ power_supply_unregister(&di->usb_chg.psy);
free_ac:
- power_supply_unregister(&di->ac_chg.psy);
-free_regulator:
- regulator_put(di->regu);
+ if(di->ac_chg.enabled)
+ power_supply_unregister(&di->ac_chg.psy);
free_charger_wq:
destroy_workqueue(di->charger_wq);
return ret;
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index b3bf178..25dae4c 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -32,6 +32,7 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/kernel.h>
#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
@@ -42,7 +43,7 @@
#define NBR_AVG_SAMPLES 20
-#define LOW_BAT_CHECK_INTERVAL (2 * HZ)
+#define LOW_BAT_CHECK_INTERVAL (HZ / 16) /* 62.5 ms */
#define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */
#define BATT_OK_MIN 2360 /* mV */
@@ -113,6 +114,13 @@ struct ab8500_fg_avg_cap {
int sum;
};
+struct ab8500_fg_cap_scaling {
+ bool enable;
+ int cap_to_scale[2];
+ int disable_cap_level;
+ int scaled_cap;
+};
+
struct ab8500_fg_battery_capacity {
int max_mah_design;
int max_mah;
@@ -123,6 +131,7 @@ struct ab8500_fg_battery_capacity {
int prev_percent;
int prev_level;
int user_mah;
+ struct ab8500_fg_cap_scaling cap_scale;
};
struct ab8500_fg_flags {
@@ -160,6 +169,8 @@ struct inst_curr_result_list {
* @recovery_cnt: Counter for recovery mode
* @high_curr_cnt: Counter for high current mode
* @init_cnt: Counter for init mode
+ * @low_bat_cnt Counter for number of consecutive low battery measures
+ * @nbr_cceoc_irq_cnt Counter for number of CCEOC irqs received since enabled
* @recovery_needed: Indicate if recovery is needed
* @high_curr_mode: Indicate if we're in high current mode
* @init_capacity: Indicate if initial capacity measuring should be done
@@ -167,13 +178,14 @@ struct inst_curr_result_list {
* @calib_state State during offset calibration
* @discharge_state: Current discharge state
* @charge_state: Current charge state
+ * @ab8500_fg_started Completion struct used for the instant current start
* @ab8500_fg_complete Completion struct used for the instant current reading
* @flags: Structure for information about events triggered
* @bat_cap: Structure for battery capacity specific parameters
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
* @fg_periodic_work: Work to run the FG algorithm periodically
@@ -199,6 +211,8 @@ struct ab8500_fg {
int recovery_cnt;
int high_curr_cnt;
int init_cnt;
+ int low_bat_cnt;
+ int nbr_cceoc_irq_cnt;
bool recovery_needed;
bool high_curr_mode;
bool init_capacity;
@@ -206,13 +220,14 @@ struct ab8500_fg {
enum ab8500_fg_calibration_state calib_state;
enum ab8500_fg_discharge_state discharge_state;
enum ab8500_fg_charge_state charge_state;
+ struct completion ab8500_fg_started;
struct completion ab8500_fg_complete;
struct ab8500_fg_flags flags;
struct ab8500_fg_battery_capacity bat_cap;
struct ab8500_fg_avg_cap avg_cap;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply fg_psy;
struct workqueue_struct *fg_wq;
struct delayed_work fg_periodic_work;
@@ -355,7 +370,7 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
/*
* We want to know if we're in low current mode
*/
- if (curr > -di->bat->fg_params->high_curr_threshold)
+ if (curr > -di->bm->fg_params->high_curr_threshold)
return true;
else
return false;
@@ -484,8 +499,9 @@ static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
di->flags.fg_enabled = true;
} else {
/* Clear any pending read requests */
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ (RESET_ACCU | READ_REQ), 0);
if (ret)
goto cc_err;
@@ -523,13 +539,14 @@ cc_err:
* Note: This is part "one" and has to be called before
* ab8500_fg_inst_curr_finalize()
*/
- int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
{
u8 reg_val;
int ret;
mutex_lock(&di->cc_lock);
+ di->nbr_cceoc_irq_cnt = 0;
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
AB8500_RTC_CC_CONF_REG, &reg_val);
if (ret < 0)
@@ -557,6 +574,7 @@ cc_err:
}
/* Return and WFI */
+ INIT_COMPLETION(di->ab8500_fg_started);
INIT_COMPLETION(di->ab8500_fg_complete);
enable_irq(di->irq);
@@ -568,6 +586,17 @@ fail:
}
/**
+ * ab8500_fg_inst_curr_started() - check if fg conversion has started
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion started, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
+{
+ return completion_done(&di->ab8500_fg_started);
+}
+
+/**
* ab8500_fg_inst_curr_done() - check if fg conversion is done
* @di: pointer to the ab8500_fg structure
*
@@ -595,13 +624,15 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
int timeout;
if (!completion_done(&di->ab8500_fg_complete)) {
- timeout = wait_for_completion_timeout(&di->ab8500_fg_complete,
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_complete,
INS_CURR_TIMEOUT);
dev_dbg(di->dev, "Finalize time: %d ms\n",
((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);
if (!timeout) {
ret = -ETIME;
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
dev_err(di->dev, "completion timed out [%d]\n",
__LINE__);
goto fail;
@@ -609,6 +640,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
}
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
@@ -647,7 +679,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
- (1000 * di->bat->fg_res);
+ (1000 * di->bm->fg_res);
if (di->turn_off_fg) {
dev_dbg(di->dev, "%s Disable FG\n", __func__);
@@ -683,6 +715,7 @@ fail:
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
{
int ret;
+ int timeout;
int res = 0;
ret = ab8500_fg_inst_curr_start(di);
@@ -691,13 +724,33 @@ int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
return 0;
}
+ /* Wait for CC to actually start */
+ if (!completion_done(&di->ab8500_fg_started)) {
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_started,
+ INS_CURR_TIMEOUT);
+ dev_dbg(di->dev, "Start time: %d ms\n",
+ ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);
+ if (!timeout) {
+ ret = -ETIME;
+ dev_err(di->dev, "completion timed out [%d]\n",
+ __LINE__);
+ goto fail;
+ }
+ }
+
ret = ab8500_fg_inst_curr_finalize(di, &res);
if (ret) {
dev_err(di->dev, "Failed to finalize fg_inst\n");
return 0;
}
+ dev_dbg(di->dev, "%s instant current: %d", __func__, res);
return res;
+fail:
+ disable_irq(di->irq);
+ mutex_unlock(&di->cc_lock);
+ return ret;
}
/**
@@ -750,19 +803,16 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
- (100 * di->bat->fg_res);
+ (100 * di->bm->fg_res);
/*
* Convert to unit value in mA
- * Full scale input voltage is
- * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA
- * Given a 250ms conversion cycle time the LSB corresponds
- * to 112.9 nAh. Convert to current by dividing by the conversion
+ * by dividing by the conversion
* time in hours (= samples / (3600 * 4)h)
- * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+ * and multiply with 1000
*/
di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
- (1000 * di->bat->fg_res * (di->fg_samples / 4));
+ (1000 * di->bm->fg_res * (di->fg_samples / 4));
di->flags.conv_done = true;
@@ -770,6 +820,8 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
queue_work(di->fg_wq, &di->fg_work);
+ dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+ di->bm->fg_res, di->fg_samples, val, di->accu_charge);
return;
exit:
dev_err(di->dev,
@@ -814,8 +866,8 @@ static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
struct abx500_v_to_cap *tbl;
int cap = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl,
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl,
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (voltage > tbl[i].voltage)
@@ -866,8 +918,8 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
struct batres_vs_temp *tbl;
int resist = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl;
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (di->bat_temp / 10 > tbl[i].temp)
@@ -888,11 +940,11 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
" fg resistance %d, total: %d (mOhm)\n",
- __func__, di->bat_temp, resist, di->bat->fg_res / 10,
- (di->bat->fg_res / 10) + resist);
+ __func__, di->bat_temp, resist, di->bm->fg_res / 10,
+ (di->bm->fg_res / 10) + resist);
/* fg_res variable is in 0.1mOhm */
- resist += di->bat->fg_res / 10;
+ resist += di->bm->fg_res / 10;
return resist;
}
@@ -915,7 +967,7 @@ static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
do {
vbat += ab8500_fg_bat_voltage(di);
i++;
- msleep(5);
+ usleep_range(5000, 6000);
} while (!ab8500_fg_inst_curr_done(di));
ab8500_fg_inst_curr_finalize(di, &di->inst_curr);
@@ -1108,16 +1160,16 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di)
{
int ret, percent;
- percent = di->bat_cap.permille / 10;
+ percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
- if (percent <= di->bat->cap_levels->critical ||
+ if (percent <= di->bm->cap_levels->critical ||
di->flags.low_bat)
ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
- else if (percent <= di->bat->cap_levels->low)
+ else if (percent <= di->bm->cap_levels->low)
ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
- else if (percent <= di->bat->cap_levels->normal)
+ else if (percent <= di->bm->cap_levels->normal)
ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
- else if (percent <= di->bat->cap_levels->high)
+ else if (percent <= di->bm->cap_levels->high)
ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
else
ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
@@ -1126,6 +1178,99 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di)
}
/**
+ * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Calculates the capacity to be shown to upper layers. Scales the capacity
+ * to have 100% as a reference from the actual capacity upon removal of charger
+ * when charging is in maintenance mode.
+ */
+static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+ int capacity = di->bat_cap.prev_percent;
+
+ if (!cs->enable)
+ return capacity;
+
+ /*
+ * As long as we are in fully charge mode scale the capacity
+ * to show 100%.
+ */
+ if (di->flags.fully_charged) {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(capacity, di->bm->fg_params->maint_thres);
+ dev_dbg(di->dev, "Scale cap with %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+
+ /* Calculates the scaled capacity. */
+ if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
+ && (cs->cap_to_scale[1] > 0))
+ capacity = min(100,
+ DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
+ cs->cap_to_scale[0],
+ cs->cap_to_scale[1]));
+
+ if (di->flags.charging) {
+ if (capacity < cs->disable_cap_level) {
+ cs->disable_cap_level = capacity;
+ dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
+ cs->disable_cap_level);
+ } else if (!di->flags.fully_charged) {
+ if (di->bat_cap.prev_percent >=
+ cs->disable_cap_level) {
+ dev_dbg(di->dev, "Disabling scaled capacity\n");
+ cs->enable = false;
+ capacity = di->bat_cap.prev_percent;
+ } else {
+ dev_dbg(di->dev,
+ "Waiting in cap to level %d%%\n",
+ cs->disable_cap_level);
+ capacity = cs->disable_cap_level;
+ }
+ }
+ }
+
+ return capacity;
+}
+
+/**
+ * ab8500_fg_update_cap_scalers() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * To be called when state change from charge<->discharge to update
+ * the capacity scalers.
+ */
+static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+
+ if (!cs->enable)
+ return;
+ if (di->flags.charging) {
+ di->bat_cap.cap_scale.disable_cap_level =
+ di->bat_cap.cap_scale.scaled_cap;
+ dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
+ di->bat_cap.cap_scale.disable_cap_level);
+ } else {
+ if (cs->scaled_cap != 100) {
+ cs->cap_to_scale[0] = cs->scaled_cap;
+ cs->cap_to_scale[1] = di->bat_cap.prev_percent;
+ } else {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(di->bat_cap.prev_percent,
+ di->bm->fg_params->maint_thres);
+ }
+
+ dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+}
+
+/**
* ab8500_fg_check_capacity_limits() - Check if capacity has changed
* @di: pointer to the ab8500_fg structure
* @init: capacity is allowed to go up in init mode
@@ -1136,6 +1281,7 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di)
static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
{
bool changed = false;
+ int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
di->bat_cap.level = ab8500_fg_capacity_level(di);
@@ -1167,33 +1313,41 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
dev_dbg(di->dev, "Battery low, set capacity to 0\n");
di->bat_cap.prev_percent = 0;
di->bat_cap.permille = 0;
+ percent = 0;
di->bat_cap.prev_mah = 0;
di->bat_cap.mah = 0;
changed = true;
} else if (di->flags.fully_charged) {
/*
* We report 100% if algorithm reported fully charged
- * unless capacity drops too much
+ * and show 100% during maintenance charging (scaling).
*/
if (di->flags.force_full) {
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
- } else if (!di->flags.force_full &&
- di->bat_cap.prev_percent !=
- (di->bat_cap.permille) / 10 &&
- (di->bat_cap.permille / 10) <
- di->bat->fg_params->maint_thres) {
+
+ changed = true;
+
+ if (!di->bat_cap.cap_scale.enable &&
+ di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.enable = true;
+ di->bat_cap.cap_scale.cap_to_scale[0] = 100;
+ di->bat_cap.cap_scale.cap_to_scale[1] =
+ di->bat_cap.prev_percent;
+ di->bat_cap.cap_scale.disable_cap_level = 100;
+ }
+ } else if (di->bat_cap.prev_percent != percent) {
dev_dbg(di->dev,
"battery reported full "
"but capacity dropping: %d\n",
- di->bat_cap.permille / 10);
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ percent);
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
changed = true;
}
- } else if (di->bat_cap.prev_percent != di->bat_cap.permille / 10) {
- if (di->bat_cap.permille / 10 == 0) {
+ } else if (di->bat_cap.prev_percent != percent) {
+ if (percent == 0) {
/*
* We will not report 0% unless we've got
* the LOW_BAT IRQ, no matter what the FG
@@ -1203,11 +1357,11 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
di->bat_cap.permille = 1;
di->bat_cap.prev_mah = 1;
di->bat_cap.mah = 1;
+ percent = 1;
changed = true;
} else if (!(!di->flags.charging &&
- (di->bat_cap.permille / 10) >
- di->bat_cap.prev_percent) || init) {
+ percent > di->bat_cap.prev_percent) || init) {
/*
* We do not allow reported capacity to go up
* unless we're charging or if we're in init
@@ -1215,9 +1369,9 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
dev_dbg(di->dev,
"capacity changed from %d to %d (%d)\n",
di->bat_cap.prev_percent,
- di->bat_cap.permille / 10,
+ percent,
di->bat_cap.permille);
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
changed = true;
@@ -1225,12 +1379,20 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
dev_dbg(di->dev, "capacity not allowed to go up since "
"no charger is connected: %d to %d (%d)\n",
di->bat_cap.prev_percent,
- di->bat_cap.permille / 10,
+ percent,
di->bat_cap.permille);
}
}
if (changed) {
+ if (di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.scaled_cap =
+ ab8500_fg_calculate_scaled_capacity(di);
+
+ dev_info(di->dev, "capacity=%d (%d)\n",
+ di->bat_cap.prev_percent,
+ di->bat_cap.cap_scale.scaled_cap);
+ }
power_supply_changed(&di->fg_psy);
if (di->flags.fully_charged && di->flags.force_full) {
dev_dbg(di->dev, "Battery full, notifying.\n");
@@ -1284,7 +1446,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
switch (di->charge_state) {
case AB8500_FG_CHARGE_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_charging);
+ di->bm->fg_params->accu_charging);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
@@ -1296,7 +1458,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
* Read the FG and calculate the new capacity
*/
mutex_lock(&di->cc_lock);
- if (!di->flags.conv_done) {
+ if (!di->flags.conv_done && !di->flags.force_full) {
/* Wasn't the CC IRQ that got us here */
mutex_unlock(&di->cc_lock);
dev_dbg(di->dev, "%s CC conv not done\n",
@@ -1346,8 +1508,8 @@ static bool check_sysfs_capacity(struct ab8500_fg *di)
cap_permille = ab8500_fg_convert_mah_to_permille(di,
di->bat_cap.user_mah);
- lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10;
- upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10;
+ lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+ upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
if (lower < 0)
lower = 0;
@@ -1387,7 +1549,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
case AB8500_FG_DISCHARGE_INIT:
/* We use the FG IRQ to work on */
di->init_cnt = 0;
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_INITMEASURING);
@@ -1400,18 +1562,17 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
* samples to get an initial capacity.
* Then go to READOUT
*/
- sleep_time = di->bat->fg_params->init_timer;
+ sleep_time = di->bm->fg_params->init_timer;
/* Discard the first [x] seconds */
- if (di->init_cnt >
- di->bat->fg_params->init_discard_time) {
+ if (di->init_cnt > di->bm->fg_params->init_discard_time) {
ab8500_fg_calc_cap_discharge_voltage(di, true);
ab8500_fg_check_capacity_limits(di, true);
}
di->init_cnt += sleep_time;
- if (di->init_cnt > di->bat->fg_params->init_total_time)
+ if (di->init_cnt > di->bm->fg_params->init_total_time)
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT_INIT);
@@ -1426,7 +1587,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
/* Intentional fallthrough */
case AB8500_FG_DISCHARGE_RECOVERY:
- sleep_time = di->bat->fg_params->recovery_sleep_timer;
+ sleep_time = di->bm->fg_params->recovery_sleep_timer;
/*
* We should check the power consumption
@@ -1438,9 +1599,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
if (di->recovery_cnt >
- di->bat->fg_params->recovery_total_time) {
+ di->bm->fg_params->recovery_total_time) {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1453,7 +1614,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
di->recovery_cnt += sleep_time;
} else {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1462,7 +1623,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
case AB8500_FG_DISCHARGE_READOUT_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1480,7 +1641,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
if (di->recovery_needed) {
ab8500_fg_discharge_state_to(di,
- AB8500_FG_DISCHARGE_RECOVERY);
+ AB8500_FG_DISCHARGE_INIT_RECOVERY);
queue_delayed_work(di->fg_wq,
&di->fg_periodic_work, 0);
@@ -1509,9 +1670,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
}
di->high_curr_cnt +=
- di->bat->fg_params->accu_high_curr;
+ di->bm->fg_params->accu_high_curr;
if (di->high_curr_cnt >
- di->bat->fg_params->high_curr_time)
+ di->bm->fg_params->high_curr_time)
di->recovery_needed = true;
ab8500_fg_calc_cap_discharge_fg(di);
@@ -1523,12 +1684,10 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
case AB8500_FG_DISCHARGE_WAKEUP:
ab8500_fg_coulomb_counter(di, true);
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
-
ab8500_fg_calc_cap_discharge_voltage(di, true);
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1641,8 +1800,6 @@ static void ab8500_fg_periodic_work(struct work_struct *work)
fg_periodic_work.work);
if (di->init_capacity) {
- /* A dummy read that will return 0 */
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
/* Get an initial capacity calculation */
ab8500_fg_calc_cap_discharge_voltage(di, true);
ab8500_fg_check_capacity_limits(di, true);
@@ -1684,24 +1841,26 @@ static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
* If we have had a battery over-voltage situation,
* check ovv-bit to see if it should be reset.
*/
- if (di->flags.bat_ovv) {
- ret = abx500_get_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_CH_STAT_REG,
- &reg_value);
- if (ret < 0) {
- dev_err(di->dev, "%s ab8500 read failed\n", __func__);
- return;
- }
- if ((reg_value & BATT_OVV) != BATT_OVV) {
- dev_dbg(di->dev, "Battery recovered from OVV\n");
- di->flags.bat_ovv = false;
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STAT_REG,
+ &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if ((reg_value & BATT_OVV) == BATT_OVV) {
+ if (!di->flags.bat_ovv) {
+ dev_dbg(di->dev, "Battery OVV\n");
+ di->flags.bat_ovv = true;
power_supply_changed(&di->fg_psy);
- return;
}
-
/* Not yet recovered from ovv, reschedule this test */
queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
- round_jiffies(HZ));
+ HZ);
+ } else {
+ dev_dbg(di->dev, "Battery recovered from OVV\n");
+ di->flags.bat_ovv = false;
+ power_supply_changed(&di->fg_psy);
}
}
@@ -1721,26 +1880,30 @@ static void ab8500_fg_low_bat_work(struct work_struct *work)
vbat = ab8500_fg_bat_voltage(di);
/* Check if LOW_BAT still fulfilled */
- if (vbat < di->bat->fg_params->lowbat_threshold) {
- di->flags.low_bat = true;
- dev_warn(di->dev, "Battery voltage still LOW\n");
-
- /*
- * We need to re-schedule this check to be able to detect
- * if the voltage increases again during charging
- */
- queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
- round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ if (vbat < di->bm->fg_params->lowbat_threshold) {
+ /* Is it time to shut down? */
+ if (di->low_bat_cnt < 1) {
+ di->flags.low_bat = true;
+ dev_warn(di->dev, "Shut down pending...\n");
+ } else {
+ /*
+ * Else we need to re-schedule this check to be able to detect
+ * if the voltage increases again during charging or
+ * due to decreasing load.
+ */
+ di->low_bat_cnt--;
+ dev_warn(di->dev, "Battery voltage still LOW\n");
+ queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+ round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ }
} else {
- di->flags.low_bat = false;
+ di->flags.low_bat_delay = false;
+ di->low_bat_cnt = 10;
dev_warn(di->dev, "Battery voltage OK again\n");
}
/* This is needed to dispatch LOW_BAT */
ab8500_fg_check_capacity_limits(di, false);
-
- /* Set this flag to check if LOW_BAT IRQ still occurs */
- di->flags.low_bat_delay = false;
}
/**
@@ -1779,8 +1942,8 @@ static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
int ret;
int new_val;
- sel0 = di->bat->fg_params->battok_falling_th_sel0;
- sel1 = di->bat->fg_params->battok_raising_th_sel1;
+ sel0 = di->bm->fg_params->battok_falling_th_sel0;
+ sel1 = di->bm->fg_params->battok_raising_th_sel1;
cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
@@ -1828,7 +1991,13 @@ static void ab8500_fg_instant_work(struct work_struct *work)
static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
{
struct ab8500_fg *di = _di;
- complete(&di->ab8500_fg_complete);
+ if (!di->nbr_cceoc_irq_cnt) {
+ di->nbr_cceoc_irq_cnt++;
+ complete(&di->ab8500_fg_started);
+ } else {
+ di->nbr_cceoc_irq_cnt = 0;
+ complete(&di->ab8500_fg_complete);
+ }
return IRQ_HANDLED;
}
@@ -1875,8 +2044,6 @@ static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di)
struct ab8500_fg *di = _di;
dev_dbg(di->dev, "Battery OVV\n");
- di->flags.bat_ovv = true;
- power_supply_changed(&di->fg_psy);
/* Schedule a new HW failure check */
queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
@@ -1895,6 +2062,7 @@ static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di)
{
struct ab8500_fg *di = _di;
+ /* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
if (!di->flags.low_bat_delay) {
dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
di->flags.low_bat_delay = true;
@@ -1963,7 +2131,7 @@ static int ab8500_fg_get_property(struct power_supply *psy,
di->bat_cap.max_mah);
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = ab8500_fg_convert_mah_to_uwh(di,
di->bat_cap.max_mah);
@@ -1978,21 +2146,23 @@ static int ab8500_fg_get_property(struct power_supply *psy,
val->intval = di->bat_cap.max_mah;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = di->bat_cap.max_mah;
else
val->intval = di->bat_cap.prev_mah;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->bm->capacity_scaling)
+ val->intval = di->bat_cap.cap_scale.scaled_cap;
+ else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = 100;
else
val->intval = di->bat_cap.prev_percent;
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
else
@@ -2049,6 +2219,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
break;
di->flags.charging = false;
di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
queue_work(di->fg_wq, &di->fg_work);
break;
case POWER_SUPPLY_STATUS_FULL:
@@ -2061,10 +2233,13 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
queue_work(di->fg_wq, &di->fg_work);
break;
case POWER_SUPPLY_STATUS_CHARGING:
- if (di->flags.charging)
+ if (di->flags.charging &&
+ !di->flags.fully_charged)
break;
di->flags.charging = true;
di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
queue_work(di->fg_wq, &di->fg_work);
break;
};
@@ -2075,10 +2250,11 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
case POWER_SUPPLY_PROP_TECHNOLOGY:
switch (ext->type) {
case POWER_SUPPLY_TYPE_BATTERY:
- if (!di->flags.batt_id_received) {
+ if (!di->flags.batt_id_received &&
+ di->bm->batt_id != BATTERY_UNKNOWN) {
const struct abx500_battery_type *b;
- b = &(di->bat->bat_type[di->bat->batt_id]);
+ b = &(di->bm->bat_type[di->bm->batt_id]);
di->flags.batt_id_received = true;
@@ -2104,8 +2280,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
case POWER_SUPPLY_PROP_TEMP:
switch (ext->type) {
case POWER_SUPPLY_TYPE_BATTERY:
- if (di->flags.batt_id_received)
- di->bat_temp = ret.intval;
+ if (di->flags.batt_id_received)
+ di->bat_temp = ret.intval;
break;
default:
break;
@@ -2155,7 +2331,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
AB8500_SYS_CTRL2_BLOCK,
AB8500_LOW_BAT_REG,
ab8500_volt_to_regval(
- di->bat->fg_params->lowbat_threshold) << 1 |
+ di->bm->fg_params->lowbat_threshold) << 1 |
LOW_BAT_ENABLE);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
@@ -2395,6 +2571,11 @@ static int ab8500_fg_suspend(struct platform_device *pdev,
struct ab8500_fg *di = platform_get_drvdata(pdev);
flush_delayed_work(&di->fg_periodic_work);
+ flush_work(&di->fg_work);
+ flush_work(&di->fg_acc_cur_work);
+ flush_delayed_work(&di->fg_reinit_work);
+ flush_delayed_work(&di->fg_low_bat_work);
+ flush_delayed_work(&di->fg_check_hw_failure_work);
/*
* If the FG is enabled we will disable it before going to suspend
@@ -2448,6 +2629,7 @@ static char *supply_interface[] = {
static int ab8500_fg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_fg *di;
int i, irq;
int ret = 0;
@@ -2457,21 +2639,19 @@ static int ab8500_fg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_fg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
mutex_init(&di->cc_lock);
@@ -2491,11 +2671,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
di->fg_psy.external_power_changed = ab8500_fg_external_power_changed;
di->bat_cap.max_mah_design = MILLI_TO_MICRO *
- di->bat->bat_type[di->bat->batt_id].charge_full_design;
+ di->bm->bat_type[di->bm->batt_id].charge_full_design;
di->bat_cap.max_mah = di->bat_cap.max_mah_design;
- di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage;
+ di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
di->init_capacity = true;
@@ -2531,6 +2711,12 @@ static int ab8500_fg_probe(struct platform_device *pdev)
INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
ab8500_fg_check_hw_failure_work);
+ /* Reset battery low voltage flag */
+ di->flags.low_bat = false;
+
+ /* Initialize low battery counter */
+ di->low_bat_cnt = 10;
+
/* Initialize OVV, and other registers */
ret = ab8500_fg_init_hw_registers(di);
if (ret) {
@@ -2549,10 +2735,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
goto free_inst_curr_wq;
}
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
- /* Initialize completion used to notify completion of inst current */
+ /*
+ * Initialize completion used to notify completion and start
+ * of inst current
+ */
+ init_completion(&di->ab8500_fg_started);
init_completion(&di->ab8500_fg_complete);
/* Register interrupts */
@@ -2572,6 +2762,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
}
di->irq = platform_get_irq_byname(pdev, "CCEOC");
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
platform_set_drvdata(pdev, di);
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 2970891..f043c08 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -33,9 +33,6 @@
/* End-of-charge criteria counter */
#define EOC_COND_CNT 10
-/* Recharge criteria counter */
-#define RCH_COND_CNT 3
-
#define to_abx500_chargalg_device_info(x) container_of((x), \
struct abx500_chargalg, chargalg_psy);
@@ -196,7 +193,6 @@ enum maxim_ret {
* @dev: pointer to the structure device
* @charge_status: battery operating status
* @eoc_cnt: counter used to determine end-of_charge
- * @rch_cnt: counter used to determine start of recharge
* @maintenance_chg: indicate if maintenance charge is active
* @t_hyst_norm temperature hysteresis when the temperature has been
* over or under normal limits
@@ -207,7 +203,7 @@ enum maxim_ret {
* @chg_info: information about connected charger types
* @batt_data: data of the battery
* @susp_status: current charger suspension status
- * @bat: pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
* @events: structure for information about events triggered
@@ -223,7 +219,6 @@ struct abx500_chargalg {
struct device *dev;
int charge_status;
int eoc_cnt;
- int rch_cnt;
bool maintenance_chg;
int t_hyst_norm;
int t_hyst_lowhigh;
@@ -232,7 +227,7 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
struct ux500_charger *usb_chg;
@@ -367,13 +362,13 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
case AC_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->main_safety_tmr_h * 3600 * HZ));
+ (di->bm->main_safety_tmr_h * 3600 * HZ));
break;
case USB_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->usb_safety_tmr_h * 3600 * HZ));
+ (di->bm->usb_safety_tmr_h * 3600 * HZ));
break;
default:
@@ -450,8 +445,18 @@ static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
{
/* Check if charger exists and kick watchdog if charging */
if (di->ac_chg && di->ac_chg->ops.kick_wd &&
- di->chg_info.online_chg & AC_CHG)
+ di->chg_info.online_chg & AC_CHG) {
+ /*
+ * If AB charger watchdog expired, pm2xxx charging
+ * gets disabled. To be safe, kick both AB charger watchdog
+ * and pm2xxx watchdog.
+ */
+ if (di->ac_chg->external &&
+ di->usb_chg && di->usb_chg->ops.kick_wd)
+ di->usb_chg->ops.kick_wd(di->usb_chg);
+
return di->ac_chg->ops.kick_wd(di->ac_chg);
+ }
else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
di->chg_info.online_chg & USB_CHG)
return di->usb_chg->ops.kick_wd(di->usb_chg);
@@ -608,6 +613,8 @@ static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
int vset, int iset)
{
+ bool start_chargalg_wd = true;
+
switch (di->chg_info.charger_type) {
case AC_CHG:
dev_dbg(di->dev,
@@ -625,8 +632,12 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
default:
dev_err(di->dev, "Unknown charger to charge from\n");
+ start_chargalg_wd = false;
break;
}
+
+ if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work))
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
}
/**
@@ -638,32 +649,32 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
*/
static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
{
- if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
- di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
+ if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) &&
+ di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) {
/* Temp OK! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
di->t_hyst_lowhigh = 0;
} else {
- if (((di->batt_data.temp >= di->bat->temp_high) &&
+ if (((di->batt_data.temp >= di->bm->temp_high) &&
(di->batt_data.temp <
- (di->bat->temp_over - di->t_hyst_lowhigh))) ||
+ (di->bm->temp_over - di->t_hyst_lowhigh))) ||
((di->batt_data.temp >
- (di->bat->temp_under + di->t_hyst_lowhigh)) &&
- (di->batt_data.temp <= di->bat->temp_low))) {
+ (di->bm->temp_under + di->t_hyst_lowhigh)) &&
+ (di->batt_data.temp <= di->bm->temp_low))) {
/* TEMP minor!!!!! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = true;
- di->t_hyst_norm = di->bat->temp_hysteresis;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
di->t_hyst_lowhigh = 0;
- } else if (di->batt_data.temp <= di->bat->temp_under ||
- di->batt_data.temp >= di->bat->temp_over) {
+ } else if (di->batt_data.temp <= di->bm->temp_under ||
+ di->batt_data.temp >= di->bm->temp_over) {
/* TEMP major!!!!! */
di->events.btemp_underover = true;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
- di->t_hyst_lowhigh = di->bat->temp_hysteresis;
+ di->t_hyst_lowhigh = di->bm->temp_hysteresis;
} else {
/* Within hysteresis */
dev_dbg(di->dev, "Within hysteresis limit temp: %d "
@@ -682,12 +693,12 @@ static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
*/
static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
{
- if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
+ if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max)
di->chg_info.usb_chg_ok = false;
else
di->chg_info.usb_chg_ok = true;
- if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
+ if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max)
di->chg_info.ac_chg_ok = false;
else
di->chg_info.ac_chg_ok = true;
@@ -707,10 +718,10 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
di->charge_state == STATE_NORMAL &&
!di->maintenance_chg && (di->batt_data.volt >=
- di->bat->bat_type[di->bat->batt_id].termination_vol ||
+ di->bm->bat_type[di->bm->batt_id].termination_vol ||
di->events.usb_cv_active || di->events.ac_cv_active) &&
di->batt_data.avg_curr <
- di->bat->bat_type[di->bat->batt_id].termination_curr &&
+ di->bm->bat_type[di->bm->batt_id].termination_curr &&
di->batt_data.avg_curr > 0) {
if (++di->eoc_cnt >= EOC_COND_CNT) {
di->eoc_cnt = 0;
@@ -733,12 +744,12 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
static void init_maxim_chg_curr(struct abx500_chargalg *di)
{
di->ccm.original_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
di->ccm.current_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
- di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
- di->ccm.max_current = di->bat->maxi->chg_curr;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
+ di->ccm.test_delta_i = di->bm->maxi->charger_curr_step;
+ di->ccm.max_current = di->bm->maxi->chg_curr;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.level = 0;
}
@@ -755,7 +766,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
{
int delta_i;
- if (!di->bat->maxi->ena_maxi)
+ if (!di->bm->maxi->ena_maxi)
return MAXIM_RET_NOACTION;
delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
@@ -766,7 +777,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
if (di->ccm.wait_cnt == 0) {
dev_dbg(di->dev, "lowering current\n");
di->ccm.wait_cnt++;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.max_current =
di->ccm.current_iset - di->ccm.test_delta_i;
di->ccm.current_iset = di->ccm.max_current;
@@ -791,7 +802,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
if (di->ccm.current_iset == di->ccm.original_iset)
return MAXIM_RET_NOACTION;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset = di->ccm.original_iset;
di->ccm.level = 0;
@@ -803,7 +814,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
di->ccm.max_current) {
if (di->ccm.condition_cnt-- == 0) {
/* Increse the iset with cco.test_delta_i */
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset += di->ccm.test_delta_i;
di->ccm.level++;
dev_dbg(di->dev, " Maximization needed, increase"
@@ -818,7 +829,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
return MAXIM_RET_NOACTION;
}
} else {
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
return MAXIM_RET_NOACTION;
}
}
@@ -838,7 +849,7 @@ static void handle_maxim_chg_curr(struct abx500_chargalg *di)
break;
case MAXIM_RET_IBAT_TOO_HIGH:
result = abx500_chargalg_update_chg_curr(di,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
if (result)
dev_err(di->dev, "failed to set chg curr\n");
break;
@@ -858,6 +869,7 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
union power_supply_propval ret;
int i, j;
bool psy_found = false;
+ bool capacity_updated = false;
psy = (struct power_supply *)data;
ext = dev_get_drvdata(dev);
@@ -870,6 +882,16 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
if (!psy_found)
return 0;
+ /*
+ * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its
+ * property because of handling that sysfs entry on its own, this is
+ * the place to get the battery capacity.
+ */
+ if (!ext->get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) {
+ di->batt_data.percent = ret.intval;
+ capacity_updated = true;
+ }
+
/* Go through all properties for the psy */
for (j = 0; j < ext->num_properties; j++) {
enum power_supply_property prop;
@@ -1154,7 +1176,8 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
}
break;
case POWER_SUPPLY_PROP_CAPACITY:
- di->batt_data.percent = ret.intval;
+ if (!capacity_updated)
+ di->batt_data.percent = ret.intval;
break;
default:
break;
@@ -1210,7 +1233,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
* this way
*/
if (!charger_status ||
- (di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
+ (di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
if (di->charge_state != STATE_HANDHELD) {
di->events.safety_timer_expired = false;
abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
@@ -1394,8 +1417,8 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_NORMAL_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
abx500_chargalg_state_to(di, STATE_NORMAL);
abx500_chargalg_start_safety_timer(di);
abx500_chargalg_stop_maintenance_timer(di);
@@ -1411,7 +1434,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
handle_maxim_chg_curr(di);
if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
di->maintenance_chg) {
- if (di->bat->no_maintenance)
+ if (di->bm->no_maintenance)
abx500_chargalg_state_to(di,
STATE_WAIT_FOR_RECHARGE_INIT);
else
@@ -1424,28 +1447,25 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_WAIT_FOR_RECHARGE_INIT:
abx500_chargalg_hold_charging(di);
abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
- di->rch_cnt = RCH_COND_CNT;
/* Intentional fallthrough */
case STATE_WAIT_FOR_RECHARGE:
- if (di->batt_data.volt <=
- di->bat->bat_type[di->bat->batt_id].recharge_vol) {
- if (di->rch_cnt-- == 0)
- abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
- } else
- di->rch_cnt = RCH_COND_CNT;
+ if (di->batt_data.percent <=
+ di->bm->bat_type[di->bm->batt_id].
+ recharge_cap)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
break;
case STATE_MAINTENANCE_A_INIT:
abx500_chargalg_stop_safety_timer(di);
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1459,13 +1479,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_MAINTENANCE_B_INIT:
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1479,10 +1499,10 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_TEMP_LOWHIGH_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].low_high_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].low_high_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_cur_lvl);
abx500_chargalg_stop_maintenance_timer(di);
di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
@@ -1543,11 +1563,11 @@ static void abx500_chargalg_periodic_work(struct work_struct *work)
if (di->chg_info.conn_chg)
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_charging * HZ);
+ di->bm->interval_charging * HZ);
else
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_not_charging * HZ);
+ di->bm->interval_not_charging * HZ);
}
/**
@@ -1614,10 +1634,13 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
if (di->events.batt_ovv) {
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else if (di->events.btemp_underover) {
- if (di->batt_data.temp <= di->bat->temp_under)
+ if (di->batt_data.temp <= di->bm->temp_under)
val->intval = POWER_SUPPLY_HEALTH_COLD;
else
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
+ di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
} else {
val->intval = POWER_SUPPLY_HEALTH_GOOD;
}
@@ -1631,6 +1654,25 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
/* Exposure to the sysfs interface */
/**
+ * abx500_chargalg_sysfs_show() - sysfs show operations
+ * @kobj: pointer to the struct kobject
+ * @attr: pointer to the struct attribute
+ * @buf: buffer that holds the parameter to send to userspace
+ *
+ * Returns a buffer to be displayed in user space
+ */
+static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ return sprintf(buf, "%d\n",
+ di->susp_status.ac_suspended &&
+ di->susp_status.usb_suspended);
+}
+
+/**
* abx500_chargalg_sysfs_charger() - sysfs store operations
* @kobj: pointer to the struct kobject
* @attr: pointer to the struct attribute
@@ -1698,7 +1740,7 @@ static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
static struct attribute abx500_chargalg_en_charger = \
{
.name = "chargalg",
- .mode = S_IWUGO,
+ .mode = S_IRUGO | S_IWUSR,
};
static struct attribute *abx500_chargalg_chg[] = {
@@ -1707,6 +1749,7 @@ static struct attribute *abx500_chargalg_chg[] = {
};
static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
+ .show = abx500_chargalg_sysfs_show,
.store = abx500_chargalg_sysfs_charger,
};
@@ -1806,6 +1849,7 @@ static char *supply_interface[] = {
static int abx500_chargalg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct abx500_chargalg *di;
int ret = 0;
@@ -1814,21 +1858,19 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get device struct */
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
index ee842b3..ca91396 100644
--- a/drivers/power/bq2415x_charger.c
+++ b/drivers/power/bq2415x_charger.c
@@ -28,7 +28,6 @@
* http://www.ti.com/product/bq24155
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/param.h>
@@ -734,12 +733,10 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
int charger = 0;
int boost = 0;
- if (mode == BQ2415X_MODE_HOST_CHARGER ||
- mode == BQ2415X_MODE_DEDICATED_CHARGER)
- charger = 1;
-
if (mode == BQ2415X_MODE_BOOST)
boost = 1;
+ else if (mode != BQ2415X_MODE_OFF)
+ charger = 1;
if (!charger)
ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
@@ -751,6 +748,10 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
return ret;
switch (mode) {
+ case BQ2415X_MODE_OFF:
+ dev_dbg(bq->dev, "changing mode to: Offline\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
case BQ2415X_MODE_NONE:
dev_dbg(bq->dev, "changing mode to: N/A\n");
ret = bq2415x_set_current_limit(bq, 100);
@@ -843,7 +844,7 @@ static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
dev_err(bq->dev, "%s\n", msg);
if (bq->automode > 0)
bq->automode = 0;
- bq2415x_set_mode(bq, BQ2415X_MODE_NONE);
+ bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
bq2415x_set_autotimer(bq, 0);
}
@@ -1136,6 +1137,10 @@ static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
return -ENOSYS;
bq->automode = 1;
mode = bq->reported_mode;
+ } else if (strncmp(buf, "off", 3) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_OFF;
} else if (strncmp(buf, "none", 4) == 0) {
if (bq->automode > 0)
bq->automode = 0;
@@ -1183,6 +1188,9 @@ static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
ret += sprintf(buf+ret, "auto (");
switch (bq->mode) {
+ case BQ2415X_MODE_OFF:
+ ret += sprintf(buf+ret, "off");
+ break;
case BQ2415X_MODE_NONE:
ret += sprintf(buf+ret, "none");
break;
@@ -1217,6 +1225,8 @@ static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
return -EINVAL;
switch (bq->reported_mode) {
+ case BQ2415X_MODE_OFF:
+ return sprintf(buf, "off\n");
case BQ2415X_MODE_NONE:
return sprintf(buf, "none\n");
case BQ2415X_MODE_HOST_CHARGER:
@@ -1523,7 +1533,7 @@ static int bq2415x_probe(struct i2c_client *client,
goto error_1;
}
- bq = kzalloc(sizeof(*bq), GFP_KERNEL);
+ bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
if (!bq) {
dev_err(&client->dev, "failed to allocate device data\n");
ret = -ENOMEM;
@@ -1536,8 +1546,8 @@ static int bq2415x_probe(struct i2c_client *client,
bq->dev = &client->dev;
bq->chip = id->driver_data;
bq->name = name;
- bq->mode = BQ2415X_MODE_NONE;
- bq->reported_mode = BQ2415X_MODE_NONE;
+ bq->mode = BQ2415X_MODE_OFF;
+ bq->reported_mode = BQ2415X_MODE_OFF;
bq->autotimer = 0;
bq->automode = 0;
@@ -1549,19 +1559,19 @@ static int bq2415x_probe(struct i2c_client *client,
ret = bq2415x_power_supply_init(bq);
if (ret) {
dev_err(bq->dev, "failed to register power supply: %d\n", ret);
- goto error_3;
+ goto error_2;
}
ret = bq2415x_sysfs_init(bq);
if (ret) {
dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret);
- goto error_4;
+ goto error_3;
}
ret = bq2415x_set_defaults(bq);
if (ret) {
dev_err(bq->dev, "failed to set default values: %d\n", ret);
- goto error_5;
+ goto error_4;
}
if (bq->init_data.set_mode_hook) {
@@ -1585,12 +1595,10 @@ static int bq2415x_probe(struct i2c_client *client,
dev_info(bq->dev, "driver registered\n");
return 0;
-error_5:
- bq2415x_sysfs_exit(bq);
error_4:
- bq2415x_power_supply_exit(bq);
+ bq2415x_sysfs_exit(bq);
error_3:
- kfree(bq);
+ bq2415x_power_supply_exit(bq);
error_2:
kfree(name);
error_1:
@@ -1622,7 +1630,6 @@ static int bq2415x_remove(struct i2c_client *client)
dev_info(bq->dev, "driver unregistered\n");
kfree(bq->name);
- kfree(bq);
return 0;
}
@@ -1652,18 +1659,7 @@ static struct i2c_driver bq2415x_driver = {
.remove = bq2415x_remove,
.id_table = bq2415x_i2c_id_table,
};
-
-static int __init bq2415x_init(void)
-{
- return i2c_add_driver(&bq2415x_driver);
-}
-module_init(bq2415x_init);
-
-static void __exit bq2415x_exit(void)
-{
- i2c_del_driver(&bq2415x_driver);
-}
-module_exit(bq2415x_exit);
+module_i2c_driver(bq2415x_driver);
MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
MODULE_DESCRIPTION("bq2415x charger driver");
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 36b34ef..8ccf5d7 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -299,7 +299,7 @@ static int bq27x00_battery_read_energy(struct bq27x00_device_info *di)
}
/*
- * Return the battery temperature in tenths of degree Celsius
+ * Return the battery temperature in tenths of degree Kelvin
* Or < 0 if something fails.
*/
static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di)
@@ -312,10 +312,8 @@ static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di)
return temp;
}
- if (bq27xxx_is_chip_version_higher(di))
- temp -= 2731;
- else
- temp = ((temp * 5) - 5463) / 2;
+ if (!bq27xxx_is_chip_version_higher(di))
+ temp = 5 * temp / 2;
return temp;
}
@@ -448,7 +446,6 @@ static void bq27x00_update(struct bq27x00_device_info *di)
cache.temperature = bq27x00_battery_read_temperature(di);
if (!is_bq27425)
cache.cycle_count = bq27x00_battery_read_cyct(di);
- cache.cycle_count = bq27x00_battery_read_cyct(di);
cache.power_avg =
bq27x00_battery_read_pwr_avg(di, BQ27x00_POWER_AVG);
@@ -642,6 +639,8 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_TEMP:
ret = bq27x00_simple_value(di->cache.temperature, val);
+ if (ret == 0)
+ val->intval -= 2731;
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
ret = bq27x00_simple_value(di->cache.time_to_empty, val);
@@ -696,7 +695,6 @@ static int bq27x00_powersupply_init(struct bq27x00_device_info *di)
int ret;
di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- di->chip = BQ27425;
if (di->chip == BQ27425) {
di->bat.properties = bq27425_battery_props;
di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props);
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 6ba047f..8acc3f8 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -669,15 +669,21 @@ static void _setup_polling(struct work_struct *work)
WARN(cm_wq == NULL, "charger-manager: workqueue not initialized"
". try it later. %s\n", __func__);
+ /*
+ * Use mod_delayed_work() iff the next polling interval should
+ * occur before the currently scheduled one. If @cm_monitor_work
+ * isn't active, the end result is the same, so no need to worry
+ * about stale @next_polling.
+ */
_next_polling = jiffies + polling_jiffy;
- if (!delayed_work_pending(&cm_monitor_work) ||
- (delayed_work_pending(&cm_monitor_work) &&
- time_after(next_polling, _next_polling))) {
- next_polling = jiffies + polling_jiffy;
+ if (time_before(_next_polling, next_polling)) {
mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy);
+ next_polling = _next_polling;
+ } else {
+ if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy))
+ next_polling = _next_polling;
}
-
out:
mutex_unlock(&cm_list_mtx);
}
@@ -751,8 +757,7 @@ static void misc_event_handler(struct charger_manager *cm,
if (cm_suspended)
device_set_wakeup_capable(cm->dev, true);
- if (!delayed_work_pending(&cm_monitor_work) &&
- is_polling_required(cm) && cm->desc->polling_interval_ms)
+ if (is_polling_required(cm) && cm->desc->polling_interval_ms)
schedule_work(&setup_polling);
uevent_notify(cm, default_event_names[type]);
}
@@ -1170,8 +1175,7 @@ static int charger_extcon_notifier(struct notifier_block *self,
* when charger cable is attached.
*/
if (cable->attached && is_polling_required(cable->cm)) {
- if (work_pending(&setup_polling))
- cancel_work_sync(&setup_polling);
+ cancel_work_sync(&setup_polling);
schedule_work(&setup_polling);
}
@@ -1215,6 +1219,55 @@ static int charger_extcon_init(struct charger_manager *cm,
return ret;
}
+/**
+ * charger_manager_register_extcon - Register extcon device to recevie state
+ * of charger cable.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function support EXTCON(External Connector) subsystem to detect the
+ * state of charger cables for enabling or disabling charger(regulator) and
+ * select the charger cable for charging among a number of external cable
+ * according to policy of H/W board.
+ */
+static int charger_manager_register_extcon(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int ret = 0;
+ int i;
+ int j;
+
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ charger->consumer = regulator_get(cm->dev,
+ charger->regulator_name);
+ if (charger->consumer == NULL) {
+ dev_err(cm->dev, "Cannot find charger(%s)n",
+ charger->regulator_name);
+ ret = -EINVAL;
+ goto err;
+ }
+ charger->cm = cm;
+
+ for (j = 0; j < charger->num_cables; j++) {
+ struct charger_cable *cable = &charger->cables[j];
+
+ ret = charger_extcon_init(cm, cable);
+ if (ret < 0) {
+ dev_err(cm->dev, "Cannot initialize charger(%s)n",
+ charger->regulator_name);
+ goto err;
+ }
+ cable->charger = charger;
+ cable->cm = cm;
+ }
+ }
+
+err:
+ return ret;
+}
+
/* help function of sysfs node to control charger(regulator) */
static ssize_t charger_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -1274,7 +1327,7 @@ static ssize_t charger_externally_control_store(struct device *dev,
for (i = 0; i < desc->num_charger_regulators; i++) {
if (&desc->charger_regulators[i] != charger &&
- !desc->charger_regulators[i].externally_control) {
+ !desc->charger_regulators[i].externally_control) {
/*
* At least, one charger is controlled by
* charger-manager
@@ -1303,13 +1356,107 @@ static ssize_t charger_externally_control_store(struct device *dev,
return count;
}
+/**
+ * charger_manager_register_sysfs - Register sysfs entry for each charger
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function add sysfs entry for charger(regulator) to control charger from
+ * user-space. If some development board use one more chargers for charging
+ * but only need one charger on specific case which is dependent on user
+ * scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/
+ * class/power_supply/battery/charger.[index]/externally_control'. For example,
+ * if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/
+ * externally_control, this charger isn't controlled from charger-manager and
+ * always stay off state of regulator.
+ */
+static int charger_manager_register_sysfs(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int chargers_externally_control = 1;
+ char buf[11];
+ char *str;
+ int ret = 0;
+ int i;
+
+ /* Create sysfs entry to control charger(regulator) */
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ snprintf(buf, 10, "charger.%d", i);
+ str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
+ if (!str) {
+ dev_err(cm->dev, "Cannot allocate memory: %s\n",
+ charger->regulator_name);
+ ret = -ENOMEM;
+ goto err;
+ }
+ strcpy(str, buf);
+
+ charger->attrs[0] = &charger->attr_name.attr;
+ charger->attrs[1] = &charger->attr_state.attr;
+ charger->attrs[2] = &charger->attr_externally_control.attr;
+ charger->attrs[3] = NULL;
+ charger->attr_g.name = str;
+ charger->attr_g.attrs = charger->attrs;
+
+ sysfs_attr_init(&charger->attr_name.attr);
+ charger->attr_name.attr.name = "name";
+ charger->attr_name.attr.mode = 0444;
+ charger->attr_name.show = charger_name_show;
+
+ sysfs_attr_init(&charger->attr_state.attr);
+ charger->attr_state.attr.name = "state";
+ charger->attr_state.attr.mode = 0444;
+ charger->attr_state.show = charger_state_show;
+
+ sysfs_attr_init(&charger->attr_externally_control.attr);
+ charger->attr_externally_control.attr.name
+ = "externally_control";
+ charger->attr_externally_control.attr.mode = 0644;
+ charger->attr_externally_control.show
+ = charger_externally_control_show;
+ charger->attr_externally_control.store
+ = charger_externally_control_store;
+
+ if (!desc->charger_regulators[i].externally_control ||
+ !chargers_externally_control)
+ chargers_externally_control = 0;
+
+ dev_info(cm->dev, "'%s' regulator's externally_control"
+ "is %d\n", charger->regulator_name,
+ charger->externally_control);
+
+ ret = sysfs_create_group(&cm->charger_psy.dev->kobj,
+ &charger->attr_g);
+ if (ret < 0) {
+ dev_err(cm->dev, "Cannot create sysfs entry"
+ "of %s regulator\n",
+ charger->regulator_name);
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (chargers_externally_control) {
+ dev_err(cm->dev, "Cannot register regulator because "
+ "charger-manager must need at least "
+ "one charger for charging battery\n");
+
+ ret = -EINVAL;
+ goto err;
+ }
+
+err:
+ return ret;
+}
+
static int charger_manager_probe(struct platform_device *pdev)
{
struct charger_desc *desc = dev_get_platdata(&pdev->dev);
struct charger_manager *cm;
int ret = 0, i = 0;
int j = 0;
- int chargers_externally_control = 1;
union power_supply_propval val;
if (g_desc && !rtc_dev && g_desc->rtc_name) {
@@ -1440,11 +1587,10 @@ static int charger_manager_probe(struct platform_device *pdev)
memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default));
- if (!desc->psy_name) {
+ if (!desc->psy_name)
strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
- } else {
+ else
strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
- }
cm->charger_psy.name = cm->psy_name_buf;
/* Allocate for psy properties because they may vary */
@@ -1496,105 +1642,19 @@ static int charger_manager_probe(struct platform_device *pdev)
goto err_register;
}
- for (i = 0 ; i < desc->num_charger_regulators ; i++) {
- struct charger_regulator *charger
- = &desc->charger_regulators[i];
- char buf[11];
- char *str;
-
- charger->consumer = regulator_get(&pdev->dev,
- charger->regulator_name);
- if (charger->consumer == NULL) {
- dev_err(&pdev->dev, "Cannot find charger(%s)n",
- charger->regulator_name);
- ret = -EINVAL;
- goto err_chg_get;
- }
- charger->cm = cm;
-
- for (j = 0 ; j < charger->num_cables ; j++) {
- struct charger_cable *cable = &charger->cables[j];
-
- ret = charger_extcon_init(cm, cable);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot find charger(%s)n",
- charger->regulator_name);
- goto err_extcon;
- }
- cable->charger = charger;
- cable->cm = cm;
- }
-
- /* Create sysfs entry to control charger(regulator) */
- snprintf(buf, 10, "charger.%d", i);
- str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
- if (!str) {
- for (i--; i >= 0; i--) {
- charger = &desc->charger_regulators[i];
- kfree(charger->attr_g.name);
- }
- ret = -ENOMEM;
-
- goto err_extcon;
- }
- strcpy(str, buf);
-
- charger->attrs[0] = &charger->attr_name.attr;
- charger->attrs[1] = &charger->attr_state.attr;
- charger->attrs[2] = &charger->attr_externally_control.attr;
- charger->attrs[3] = NULL;
- charger->attr_g.name = str;
- charger->attr_g.attrs = charger->attrs;
-
- sysfs_attr_init(&charger->attr_name.attr);
- charger->attr_name.attr.name = "name";
- charger->attr_name.attr.mode = 0444;
- charger->attr_name.show = charger_name_show;
-
- sysfs_attr_init(&charger->attr_state.attr);
- charger->attr_state.attr.name = "state";
- charger->attr_state.attr.mode = 0444;
- charger->attr_state.show = charger_state_show;
-
- sysfs_attr_init(&charger->attr_externally_control.attr);
- charger->attr_externally_control.attr.name
- = "externally_control";
- charger->attr_externally_control.attr.mode = 0644;
- charger->attr_externally_control.show
- = charger_externally_control_show;
- charger->attr_externally_control.store
- = charger_externally_control_store;
-
- if (!desc->charger_regulators[i].externally_control ||
- !chargers_externally_control) {
- chargers_externally_control = 0;
- }
- dev_info(&pdev->dev, "'%s' regulator's externally_control"
- "is %d\n", charger->regulator_name,
- charger->externally_control);
-
- ret = sysfs_create_group(&cm->charger_psy.dev->kobj,
- &charger->attr_g);
- if (ret < 0) {
- dev_info(&pdev->dev, "Cannot create sysfs entry"
- "of %s regulator\n",
- charger->regulator_name);
- }
- }
-
- if (chargers_externally_control) {
- dev_err(&pdev->dev, "Cannot register regulator because "
- "charger-manager must need at least "
- "one charger for charging battery\n");
-
- ret = -EINVAL;
- goto err_chg_enable;
+ /* Register extcon device for charger cable */
+ ret = charger_manager_register_extcon(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot initialize extcon device\n");
+ goto err_reg_extcon;
}
- ret = try_charger_enable(cm, true);
- if (ret) {
- dev_err(&pdev->dev, "Cannot enable charger regulators\n");
- goto err_chg_enable;
+ /* Register sysfs entry for charger(regulator) */
+ ret = charger_manager_register_sysfs(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Cannot initialize sysfs entry of regulator\n");
+ goto err_reg_sysfs;
}
/* Add to the list */
@@ -1613,27 +1673,28 @@ static int charger_manager_probe(struct platform_device *pdev)
return 0;
-err_chg_enable:
+err_reg_sysfs:
for (i = 0; i < desc->num_charger_regulators; i++) {
struct charger_regulator *charger;
charger = &desc->charger_regulators[i];
sysfs_remove_group(&cm->charger_psy.dev->kobj,
&charger->attr_g);
+
kfree(charger->attr_g.name);
}
-err_extcon:
- for (i = 0 ; i < desc->num_charger_regulators ; i++) {
- struct charger_regulator *charger
- = &desc->charger_regulators[i];
- for (j = 0 ; j < charger->num_cables ; j++) {
+err_reg_extcon:
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ struct charger_regulator *charger;
+
+ charger = &desc->charger_regulators[i];
+ for (j = 0; j < charger->num_cables; j++) {
struct charger_cable *cable = &charger->cables[j];
extcon_unregister_interest(&cable->extcon_dev);
}
- }
-err_chg_get:
- for (i = 0 ; i < desc->num_charger_regulators ; i++)
+
regulator_put(desc->charger_regulators[i].consumer);
+ }
power_supply_unregister(&cm->charger_psy);
err_register:
@@ -1661,10 +1722,8 @@ static int charger_manager_remove(struct platform_device *pdev)
list_del(&cm->entry);
mutex_unlock(&cm_list_mtx);
- if (work_pending(&setup_polling))
- cancel_work_sync(&setup_polling);
- if (delayed_work_pending(&cm_monitor_work))
- cancel_delayed_work_sync(&cm_monitor_work);
+ cancel_work_sync(&setup_polling);
+ cancel_delayed_work_sync(&cm_monitor_work);
for (i = 0 ; i < desc->num_charger_regulators ; i++) {
struct charger_regulator *charger
@@ -1733,8 +1792,7 @@ static int cm_suspend_prepare(struct device *dev)
cm_suspended = true;
}
- if (delayed_work_pending(&cm->fullbatt_vchk_work))
- cancel_delayed_work(&cm->fullbatt_vchk_work);
+ cancel_delayed_work(&cm->fullbatt_vchk_work);
cm->status_save_ext_pwr_inserted = is_ext_pwr_online(cm);
cm->status_save_batt = is_batt_present(cm);
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index 94762e6..e8c5a39 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/notifier.h>
#define DA9030_FAULT_LOG 0x0a
#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7)
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
index 3c5c2e4..08193fe 100644
--- a/drivers/power/da9052-battery.c
+++ b/drivers/power/da9052-battery.c
@@ -337,7 +337,7 @@ static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
if (adc_temp > vc_tbl_ref[DA9052_VC_TBL_REF_SZ - 1])
return DA9052_VC_TBL_REF_SZ - 1;
- for (i = 0; i < DA9052_VC_TBL_REF_SZ; i++) {
+ for (i = 0; i < DA9052_VC_TBL_REF_SZ - 1; i++) {
if ((adc_temp > vc_tbl_ref[i]) &&
(adc_temp <= DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1])))
return i;
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 2fa9b6b..e7301b3 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -7,6 +7,8 @@
*
* DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
*
+ * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -19,6 +21,7 @@
#include <linux/errno.h>
#include <linux/swab.h>
#include <linux/i2c.h>
+#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
@@ -40,6 +43,8 @@
#define DS2786_CURRENT_UNITS 25
+#define DS278x_DELAY 1000
+
struct ds278x_info;
struct ds278x_battery_ops {
@@ -54,8 +59,11 @@ struct ds278x_info {
struct i2c_client *client;
struct power_supply battery;
struct ds278x_battery_ops *ops;
+ struct delayed_work bat_work;
int id;
int rsns;
+ int capacity;
+ int status; /* State Of Charge */
};
static DEFINE_IDR(battery_id);
@@ -220,6 +228,8 @@ static int ds278x_get_status(struct ds278x_info *info, int *status)
if (err)
return err;
+ info->capacity = capacity;
+
if (capacity == 100)
*status = POWER_SUPPLY_STATUS_FULL;
else if (current_uA == 0)
@@ -267,6 +277,27 @@ static int ds278x_battery_get_property(struct power_supply *psy,
return ret;
}
+static void ds278x_bat_update(struct ds278x_info *info)
+{
+ int old_status = info->status;
+ int old_capacity = info->capacity;
+
+ ds278x_get_status(info, &info->status);
+
+ if ((old_status != info->status) || (old_capacity != info->capacity))
+ power_supply_changed(&info->battery);
+}
+
+static void ds278x_bat_work(struct work_struct *work)
+{
+ struct ds278x_info *info;
+
+ info = container_of(work, struct ds278x_info, bat_work.work);
+ ds278x_bat_update(info);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+}
+
static enum power_supply_property ds278x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CAPACITY,
@@ -295,10 +326,39 @@ static int ds278x_battery_remove(struct i2c_client *client)
idr_remove(&battery_id, info->id);
mutex_unlock(&battery_lock);
+ cancel_delayed_work(&info->bat_work);
+
kfree(info);
return 0;
}
+#ifdef CONFIG_PM
+
+static int ds278x_suspend(struct i2c_client *client,
+ pm_message_t state)
+{
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&info->bat_work);
+ return 0;
+}
+
+static int ds278x_resume(struct i2c_client *client)
+{
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+ return 0;
+}
+
+#else
+
+#define ds278x_suspend NULL
+#define ds278x_resume NULL
+
+#endif /* CONFIG_PM */
+
+
enum ds278x_num_id {
DS2782 = 0,
DS2786,
@@ -368,10 +428,17 @@ static int ds278x_battery_probe(struct i2c_client *client,
info->ops = &ds278x_ops[id->driver_data];
ds278x_power_supply_init(&info->battery);
+ info->capacity = 100;
+ info->status = POWER_SUPPLY_STATUS_FULL;
+
+ INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
+
ret = power_supply_register(&client->dev, &info->battery);
if (ret) {
dev_err(&client->dev, "failed to register battery\n");
goto fail_register;
+ } else {
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
}
return 0;
@@ -401,6 +468,8 @@ static struct i2c_driver ds278x_battery_driver = {
},
.probe = ds278x_battery_probe,
.remove = ds278x_battery_remove,
+ .suspend = ds278x_suspend,
+ .resume = ds278x_resume,
.id_table = ds278x_id,
};
module_i2c_driver(ds278x_battery_driver);
diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/generic-adc-battery.c
index 32ce17e..836816b 100644
--- a/drivers/power/generic-adc-battery.c
+++ b/drivers/power/generic-adc-battery.c
@@ -263,9 +263,6 @@ static int gab_probe(struct platform_device *pdev)
psy->external_power_changed = gab_ext_power_changed;
adc_bat->pdata = pdata;
- /* calculate the total number of channels */
- chan = ARRAY_SIZE(gab_chan_name);
-
/*
* copying the static properties and allocating extra memory for holding
* the extra configurable properties received from platform data.
@@ -291,6 +288,7 @@ static int gab_probe(struct platform_device *pdev)
gab_chan_name[chan]);
if (IS_ERR(adc_bat->channel[chan])) {
ret = PTR_ERR(adc_bat->channel[chan]);
+ adc_bat->channel[chan] = NULL;
} else {
/* copying properties for supported channels only */
memcpy(properties + sizeof(*(psy->properties)) * index,
@@ -344,8 +342,10 @@ err_gpio:
gpio_req_fail:
power_supply_unregister(psy);
err_reg_fail:
- for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++)
- iio_channel_release(adc_bat->channel[chan]);
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
second_mem_fail:
kfree(psy->properties);
first_mem_fail:
@@ -365,8 +365,10 @@ static int gab_remove(struct platform_device *pdev)
gpio_free(pdata->gpio_charge_finished);
}
- for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++)
- iio_channel_release(adc_bat->channel[chan]);
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
kfree(adc_bat->psy.properties);
cancel_delayed_work(&adc_bat->bat_work);
diff --git a/drivers/power/goldfish_battery.c b/drivers/power/goldfish_battery.c
new file mode 100644
index 0000000..c10f460
--- /dev/null
+++ b/drivers/power/goldfish_battery.c
@@ -0,0 +1,236 @@
+/*
+ * Power supply driver for the goldfish emulator
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+struct goldfish_battery_data {
+ void __iomem *reg_base;
+ int irq;
+ spinlock_t lock;
+
+ struct power_supply battery;
+ struct power_supply ac;
+};
+
+#define GOLDFISH_BATTERY_READ(data, addr) \
+ (readl(data->reg_base + addr))
+#define GOLDFISH_BATTERY_WRITE(data, addr, x) \
+ (writel(x, data->reg_base + addr))
+
+/*
+ * Temporary variable used between goldfish_battery_probe() and
+ * goldfish_battery_open().
+ */
+static struct goldfish_battery_data *battery_data;
+
+enum {
+ /* status register */
+ BATTERY_INT_STATUS = 0x00,
+ /* set this to enable IRQ */
+ BATTERY_INT_ENABLE = 0x04,
+
+ BATTERY_AC_ONLINE = 0x08,
+ BATTERY_STATUS = 0x0C,
+ BATTERY_HEALTH = 0x10,
+ BATTERY_PRESENT = 0x14,
+ BATTERY_CAPACITY = 0x18,
+
+ BATTERY_STATUS_CHANGED = 1U << 0,
+ AC_STATUS_CHANGED = 1U << 1,
+ BATTERY_INT_MASK = BATTERY_STATUS_CHANGED | AC_STATUS_CHANGED,
+};
+
+
+static int goldfish_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = container_of(psy,
+ struct goldfish_battery_data, ac);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_AC_ONLINE);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int goldfish_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = container_of(psy,
+ struct goldfish_battery_data, battery);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_STATUS);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_HEALTH);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CAPACITY);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property goldfish_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static enum power_supply_property goldfish_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static irqreturn_t goldfish_battery_interrupt(int irq, void *dev_id)
+{
+ unsigned long irq_flags;
+ struct goldfish_battery_data *data = dev_id;
+ uint32_t status;
+
+ spin_lock_irqsave(&data->lock, irq_flags);
+
+ /* read status flags, which will clear the interrupt */
+ status = GOLDFISH_BATTERY_READ(data, BATTERY_INT_STATUS);
+ status &= BATTERY_INT_MASK;
+
+ if (status & BATTERY_STATUS_CHANGED)
+ power_supply_changed(&data->battery);
+ if (status & AC_STATUS_CHANGED)
+ power_supply_changed(&data->ac);
+
+ spin_unlock_irqrestore(&data->lock, irq_flags);
+ return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+
+static int goldfish_battery_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct goldfish_battery_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+
+ data->battery.properties = goldfish_battery_props;
+ data->battery.num_properties = ARRAY_SIZE(goldfish_battery_props);
+ data->battery.get_property = goldfish_battery_get_property;
+ data->battery.name = "battery";
+ data->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ data->ac.properties = goldfish_ac_props;
+ data->ac.num_properties = ARRAY_SIZE(goldfish_ac_props);
+ data->ac.get_property = goldfish_ac_get_property;
+ data->ac.name = "ac";
+ data->ac.type = POWER_SUPPLY_TYPE_MAINS;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "platform_get_resource failed\n");
+ return -ENODEV;
+ }
+
+ data->reg_base = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ if (data->reg_base == NULL) {
+ dev_err(&pdev->dev, "unable to remap MMIO\n");
+ return -ENOMEM;
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, data->irq, goldfish_battery_interrupt,
+ IRQF_SHARED, pdev->name, data);
+ if (ret)
+ return ret;
+
+ ret = power_supply_register(&pdev->dev, &data->ac);
+ if (ret)
+ return ret;
+
+ ret = power_supply_register(&pdev->dev, &data->battery);
+ if (ret) {
+ power_supply_unregister(&data->ac);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, data);
+ battery_data = data;
+
+ GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK);
+ return 0;
+}
+
+static int goldfish_battery_remove(struct platform_device *pdev)
+{
+ struct goldfish_battery_data *data = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&data->battery);
+ power_supply_unregister(&data->ac);
+ battery_data = NULL;
+ return 0;
+}
+
+static struct platform_driver goldfish_battery_device = {
+ .probe = goldfish_battery_probe,
+ .remove = goldfish_battery_remove,
+ .driver = {
+ .name = "goldfish-battery"
+ }
+};
+module_platform_driver(goldfish_battery_device);
+
+MODULE_AUTHOR("Mike Lockwood lockwood@android.com");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for the Goldfish emulator");
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index 4ee71a9..5ef41b8 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -367,28 +367,28 @@ static int lp8727_battery_get_property(struct power_supply *psy,
return -EINVAL;
if (pdata->get_batt_present)
- val->intval = pchg->pdata->get_batt_present();
+ val->intval = pdata->get_batt_present();
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_level)
- val->intval = pchg->pdata->get_batt_level();
+ val->intval = pdata->get_batt_level();
break;
case POWER_SUPPLY_PROP_CAPACITY:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_capacity)
- val->intval = pchg->pdata->get_batt_capacity();
+ val->intval = pdata->get_batt_capacity();
break;
case POWER_SUPPLY_PROP_TEMP:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_temp)
- val->intval = pchg->pdata->get_batt_temp();
+ val->intval = pdata->get_batt_temp();
break;
default:
break;
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
index 22b6407c..e33d6b2 100644
--- a/drivers/power/lp8788-charger.c
+++ b/drivers/power/lp8788-charger.c
@@ -367,7 +367,8 @@ static inline bool lp8788_is_valid_charger_register(u8 addr)
return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END;
}
-static int lp8788_update_charger_params(struct lp8788_charger *pchg)
+static int lp8788_update_charger_params(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
{
struct lp8788 *lp = pchg->lp;
struct lp8788_charger_platform_data *pdata = pchg->pdata;
@@ -376,7 +377,7 @@ static int lp8788_update_charger_params(struct lp8788_charger *pchg)
int ret;
if (!pdata || !pdata->chg_params) {
- dev_info(lp->dev, "skip updating charger parameters\n");
+ dev_info(&pdev->dev, "skip updating charger parameters\n");
return 0;
}
@@ -537,7 +538,6 @@ err_free_irq:
static int lp8788_irq_register(struct platform_device *pdev,
struct lp8788_charger *pchg)
{
- struct lp8788 *lp = pchg->lp;
const char *name[] = {
LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ
};
@@ -550,13 +550,13 @@ static int lp8788_irq_register(struct platform_device *pdev,
for (i = 0; i < ARRAY_SIZE(name); i++) {
ret = lp8788_set_irqs(pdev, pchg, name[i]);
if (ret) {
- dev_warn(lp->dev, "irq setup failed: %s\n", name[i]);
+ dev_warn(&pdev->dev, "irq setup failed: %s\n", name[i]);
return ret;
}
}
if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) {
- dev_err(lp->dev, "invalid total number of irqs: %d\n",
+ dev_err(&pdev->dev, "invalid total number of irqs: %d\n",
pchg->num_irqs);
return -EINVAL;
}
@@ -690,9 +690,10 @@ static int lp8788_charger_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
struct lp8788_charger *pchg;
+ struct device *dev = &pdev->dev;
int ret;
- pchg = devm_kzalloc(lp->dev, sizeof(struct lp8788_charger), GFP_KERNEL);
+ pchg = devm_kzalloc(dev, sizeof(struct lp8788_charger), GFP_KERNEL);
if (!pchg)
return -ENOMEM;
@@ -700,7 +701,7 @@ static int lp8788_charger_probe(struct platform_device *pdev)
pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL;
platform_set_drvdata(pdev, pchg);
- ret = lp8788_update_charger_params(pchg);
+ ret = lp8788_update_charger_params(pdev, pchg);
if (ret)
return ret;
@@ -718,7 +719,7 @@ static int lp8788_charger_probe(struct platform_device *pdev)
ret = lp8788_irq_register(pdev, pchg);
if (ret)
- dev_warn(lp->dev, "failed to register charger irq: %d\n", ret);
+ dev_warn(dev, "failed to register charger irq: %d\n", ret);
return 0;
}
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 22cfe9c..74a0bd9 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -207,7 +207,7 @@ static int max17040_probe(struct i2c_client *client,
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
return -EIO;
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
@@ -225,7 +225,6 @@ static int max17040_probe(struct i2c_client *client,
ret = power_supply_register(&client->dev, &chip->battery);
if (ret) {
dev_err(&client->dev, "failed: power supply register\n");
- kfree(chip);
return ret;
}
@@ -244,7 +243,6 @@ static int max17040_remove(struct i2c_client *client)
power_supply_unregister(&chip->battery);
cancel_delayed_work(&chip->work);
- kfree(chip);
return 0;
}
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
new file mode 100644
index 0000000..ed48d75
--- /dev/null
+++ b/drivers/power/pm2301_charger.c
@@ -0,0 +1,1088 @@
+/*
+ * Copyright 2012 ST Ericsson.
+ *
+ * Power supply driver for ST Ericsson pm2xxx_charger charger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/pm2301_charger.h>
+#include <linux/gpio.h>
+
+#include "pm2301_charger.h"
+
+#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
+ struct pm2xxx_charger, ac_chg)
+
+static int pm2xxx_interrupt_registers[] = {
+ PM2XXX_REG_INT1,
+ PM2XXX_REG_INT2,
+ PM2XXX_REG_INT3,
+ PM2XXX_REG_INT4,
+ PM2XXX_REG_INT5,
+ PM2XXX_REG_INT6,
+};
+
+static enum power_supply_property pm2xxx_charger_ac_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+};
+
+static int pm2xxx_charger_voltage_map[] = {
+ 3500,
+ 3525,
+ 3550,
+ 3575,
+ 3600,
+ 3625,
+ 3650,
+ 3675,
+ 3700,
+ 3725,
+ 3750,
+ 3775,
+ 3800,
+ 3825,
+ 3850,
+ 3875,
+ 3900,
+ 3925,
+ 3950,
+ 3975,
+ 4000,
+ 4025,
+ 4050,
+ 4075,
+ 4100,
+ 4125,
+ 4150,
+ 4175,
+ 4200,
+ 4225,
+ 4250,
+ 4275,
+ 4300,
+};
+
+static int pm2xxx_charger_current_map[] = {
+ 200,
+ 200,
+ 400,
+ 600,
+ 800,
+ 1000,
+ 1200,
+ 1400,
+ 1600,
+ 1800,
+ 2000,
+ 2200,
+ 2400,
+ 2600,
+ 2800,
+ 3000,
+};
+
+static const struct i2c_device_id pm2xxx_ident[] = {
+ { "pm2301", 0 },
+ { }
+};
+
+static void set_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (pm2->ac.charger_connected)
+ return;
+ gpio_set_value(pm2->lpn_pin, 1);
+
+ return;
+}
+
+static void clear_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (pm2->ac.charger_connected)
+ return;
+ gpio_set_value(pm2->lpn_pin, 0);
+
+ return;
+}
+
+static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
+{
+ int ret;
+ /*
+ * When AC adaptor is unplugged, the host
+ * must put LPN high to be able to
+ * communicate by I2C with PM2301
+ * and receive I2C "acknowledge" from PM2301.
+ */
+ mutex_lock(&pm2->lock);
+ set_lpn_pin(pm2);
+
+ ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
+ else
+ ret = 0;
+ clear_lpn_pin(pm2);
+ mutex_unlock(&pm2->lock);
+
+ return ret;
+}
+
+static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
+{
+ int ret;
+ /*
+ * When AC adaptor is unplugged, the host
+ * must put LPN high to be able to
+ * communicate by I2C with PM2301
+ * and receive I2C "acknowledge" from PM2301.
+ */
+ mutex_lock(&pm2->lock);
+ set_lpn_pin(pm2);
+
+ ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, &val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
+ else
+ ret = 0;
+ clear_lpn_pin(pm2);
+ mutex_unlock(&pm2->lock);
+
+ return ret;
+}
+
+static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Enable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA));
+
+ return ret;
+}
+
+static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Disable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
+
+ return ret;
+}
+
+static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+
+int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ int ret = 0;
+
+ pm2->failure_input_ovv++;
+ if (pm2->failure_input_ovv < 4) {
+ ret = pm2xxx_charging_enable_mngt(pm2);
+ goto out;
+ } else {
+ pm2->failure_input_ovv = 0;
+ dev_err(pm2->dev, "Overvoltage detected\n");
+ pm2->flags.ovv = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+ }
+
+out:
+ return ret;
+}
+
+static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev , "20 minutes watchdog occured\n");
+
+ pm2->ac.wd_expired = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+
+ return 0;
+}
+
+static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ switch (val) {
+ case PM2XXX_INT1_ITVBATLOWR:
+ dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
+ break;
+
+ case PM2XXX_INT1_ITVBATLOWF:
+ dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
+ break;
+
+ default:
+ dev_err(pm2->dev, "Unknown VBAT level\n");
+ }
+
+ return 0;
+}
+
+static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev, "battery disconnected\n");
+
+ return 0;
+}
+
+static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
+{
+ int ret;
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
+
+ if (ret < 0) {
+ dev_err(pm2->dev, "Charger detection failed\n");
+ goto out;
+ }
+
+ *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
+
+out:
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val)
+{
+
+ int ret;
+ u8 read_val;
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if the main charger is
+ * connected by reading the interrupt source register.
+ */
+ ret = pm2xxx_charger_detection(pm2, &read_val);
+
+ if ((ret == 0) && read_val) {
+ pm2->ac.charger_connected = 1;
+ pm2->ac_conn = true;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+ }
+
+
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
+ int val)
+{
+ pm2->ac.charger_connected = 0;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+
+ return 0;
+}
+
+static int pm2_int_reg0(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
+ (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
+ }
+
+ if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
+ ret = pm2xxx_charger_bat_disc_mngt(pm2,
+ PM2XXX_INT1_ITVBATDISCONNECT);
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg1(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
+ dev_dbg(pm2->dev , "Main charger plugged\n");
+ ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
+ }
+
+ if (val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
+ dev_dbg(pm2->dev , "Main charger unplugged\n");
+ ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG |
+ PM2XXX_INT2_ITVPWR2UNPLUG));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg2(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
+ ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
+
+ if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
+ PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
+ dev_dbg(pm2->dev,
+ "Watchdog occured for precharge, CC and CV charge\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg3(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT4_ITCHARGINGON)) {
+ dev_dbg(pm2->dev ,
+ "chargind operation has started\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVRESUME)) {
+ dev_dbg(pm2->dev,
+ "battery discharged down to VResume threshold\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITBATTFULL)) {
+ dev_dbg(pm2->dev , "battery fully detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITCVPHASE)) {
+ dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
+ pm2->failure_case = VPWR_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
+ dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT)) {
+ ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
+ (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT));
+ dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg4(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
+ pm2->failure_case = VSYSTEM_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ PM2XXX_INT5_ITVSYSTEMOVV);
+ dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
+ dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
+ ret = pm2xxx_charger_die_therm_mngt(pm2, val &
+ (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg5(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+
+ if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
+ dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
+ }
+
+ if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
+ PM2XXX_INT6_ITVPWR1VALIDRISE |
+ PM2XXX_INT6_ITVPWR2VALIDFALL |
+ PM2XXX_INT6_ITVPWR1VALIDFALL)) {
+ dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
+ }
+
+ return ret;
+}
+
+static irqreturn_t pm2xxx_irq_int(int irq, void *data)
+{
+ struct pm2xxx_charger *pm2 = data;
+ struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
+ int i;
+
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &(interrupt->reg[i]));
+
+ if (interrupt->reg[i] > 0)
+ interrupt->handler[i](pm2, interrupt->reg[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+ u8 val;
+
+ if (pm2->ac.charger_connected && pm2->ac.charger_online) {
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto out;
+ }
+
+ if (val & PM2XXX_INT4_S_ITCVPHASE)
+ ret = PM2XXX_CONST_VOLT;
+ else
+ ret = PM2XXX_CONST_CURR;
+ }
+out:
+ return ret;
+}
+
+static int pm2xxx_current_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_current_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) {
+ if (curr < pm2xxx_charger_current_map[i])
+ return (i - 1);
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1;
+ if (curr == pm2xxx_charger_current_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_voltage_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_voltage_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) {
+ if (curr < pm2xxx_charger_voltage_map[i])
+ return i - 1;
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1;
+ if (curr == pm2xxx_charger_voltage_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
+ int ich_out)
+{
+ int ret;
+ int curr_index;
+ struct pm2xxx_charger *pm2;
+ u8 val;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ curr_index = pm2xxx_current_to_regval(ich_out);
+ if (curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger current too high, charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret >= 0) {
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev,
+ "%s write failed\n", __func__);
+ }
+ }
+ else
+ dev_err(pm2->dev, "%s read failed\n", __func__);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm2xxx_charger *pm2;
+
+ pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (pm2->flags.mainextchnotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (pm2->ac.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (pm2->flags.main_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = pm2->ac.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = pm2->ac.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2);
+ val->intval = pm2->ac.cv_active;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+
+ /* enable CC and CV watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3,
+ (PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN));
+ if( ret < 0)
+ return ret;
+
+ /* enable precharge watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
+ PM2XXX_CH_WD_PRECH_PHASE_60MIN);
+
+ /* Disable auto timeout */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
+ PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
+
+ /*
+ * EOC current level = 100mA
+ * Precharge current level = 100mA
+ * CC current level = 1000mA
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
+ (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
+ PM2XXX_CH_PRECH_CURRENT_100MA |
+ PM2XXX_CH_EOC_CURRENT_100MA));
+
+ /*
+ * recharge threshold = 3.8V
+ * Precharge to CC threshold = 2.9V
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
+ (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
+
+ /* float voltage charger level = 4.2V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
+ PM2XXX_CH_VOLT_4_2);
+
+ /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
+ (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
+ PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
+ PM2XXX_CH_CC_MODEDROP_DIS));
+
+ /* Input charger level of over voltage = 10V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
+ PM2XXX_VPWR2_OVV_10);
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
+ PM2XXX_VPWR1_OVV_10);
+
+ /* Input charger drop */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
+ (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
+ PM2XXX_VPWR2_DROP_DIS));
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
+ (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
+ PM2XXX_VPWR1_DROP_DIS));
+
+ /* Disable battery low monitoring */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
+ PM2XXX_VBAT_LOW_MONITORING_ENA);
+
+ /* Disable LED */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
+ PM2XXX_LED_SELECT_DIS);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
+ int enable, int vset, int iset)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ u8 val;
+
+ struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger);
+
+ if (enable) {
+ if (!pm2->ac.charger_connected) {
+ dev_dbg(pm2->dev, "AC charger not connected\n");
+ return -ENXIO;
+ }
+
+ dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+ if (!pm2->vddadc_en_ac) {
+ regulator_enable(pm2->regu);
+ pm2->vddadc_en_ac = true;
+ }
+
+ ret = pm2xxx_charging_init(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s charging init failed\n",
+ __func__);
+ goto error_occured;
+ }
+
+ volt_index = pm2xxx_voltage_to_regval(vset);
+ curr_index = pm2xxx_current_to_regval(iset);
+
+ if (volt_index < 0 || curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_CH_VOLT_MASK;
+ val |= volt_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ if (!pm2->bat->enable_overshoot) {
+ ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n",
+ __func__);
+ goto error_occured;
+ }
+ val |= PM2XXX_ANTI_OVERSHOOT_EN;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n",
+ __func__);
+ goto error_occured;
+ }
+ }
+
+ ret = pm2xxx_charging_enable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "Failed to enable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ pm2->ac.charger_online = 1;
+ } else {
+ pm2->ac.charger_online = 0;
+ pm2->ac.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (pm2->vddadc_en_ac) {
+ regulator_disable(pm2->regu);
+ pm2->vddadc_en_ac = false;
+ }
+
+ ret = pm2xxx_charging_disable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "failed to disable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");
+ }
+ power_supply_changed(&pm2->ac_chg.psy);
+
+error_occured:
+ return ret;
+}
+
+static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger)
+{
+ int ret;
+ struct pm2xxx_charger *pm2;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER);
+ if (ret)
+ dev_err(pm2->dev, "Failed to kick WD!\n");
+
+ return ret;
+}
+
+static void pm2xxx_charger_ac_work(struct work_struct *work)
+{
+ struct pm2xxx_charger *pm2 = container_of(work,
+ struct pm2xxx_charger, ac_work);
+
+
+ power_supply_changed(&pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
+};
+
+static void pm2xxx_charger_check_main_thermal_prot_work(
+ struct work_struct *work)
+{
+};
+
+static struct pm2xxx_interrupts pm2xxx_int = {
+ .handler[0] = pm2_int_reg0,
+ .handler[1] = pm2_int_reg1,
+ .handler[2] = pm2_int_reg2,
+ .handler[3] = pm2_int_reg3,
+ .handler[4] = pm2_int_reg4,
+ .handler[5] = pm2_int_reg5,
+};
+
+static struct pm2xxx_irq pm2xxx_charger_irq[] = {
+ {"PM2XXX_IRQ_INT", pm2xxx_irq_int},
+};
+
+static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client)
+{
+ return 0;
+}
+
+static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
+ const struct i2c_device_id *id)
+{
+ struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
+ struct pm2xxx_charger *pm2;
+ int ret = 0;
+ u8 val;
+
+ pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
+ if (!pm2) {
+ dev_err(pm2->dev, "pm2xxx_charger allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* get parent data */
+ pm2->dev = &i2c_client->dev;
+ pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+ pm2->pm2_int = &pm2xxx_int;
+
+ /* get charger spcific platform data */
+ if (!pl_data->wall_charger) {
+ dev_err(pm2->dev, "no charger platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->pdata = pl_data->wall_charger;
+
+ /* get battery specific platform data */
+ if (!pl_data->battery) {
+ dev_err(pm2->dev, "no battery platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->bat = pl_data->battery;
+
+ /*get lpn GPIO from platform data*/
+ if (!pm2->pdata->lpn_gpio) {
+ dev_err(pm2->dev, "no lpn gpio data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+ pm2->lpn_pin = pm2->pdata->lpn_gpio;
+
+ if (!i2c_check_functionality(i2c_client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ ret = -ENODEV;
+ dev_info(pm2->dev, "pm2301 i2c_check_functionality failed\n");
+ goto free_device_info;
+ }
+
+ pm2->config.pm2xxx_i2c = i2c_client;
+ pm2->config.pm2xxx_id = (struct i2c_device_id *) id;
+ i2c_set_clientdata(i2c_client, pm2);
+
+ /* AC supply */
+ /* power_supply base class */
+ pm2->ac_chg.psy.name = pm2->pdata->label;
+ pm2->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS;
+ pm2->ac_chg.psy.properties = pm2xxx_charger_ac_props;
+ pm2->ac_chg.psy.num_properties = ARRAY_SIZE(pm2xxx_charger_ac_props);
+ pm2->ac_chg.psy.get_property = pm2xxx_charger_ac_get_property;
+ pm2->ac_chg.psy.supplied_to = pm2->pdata->supplied_to;
+ pm2->ac_chg.psy.num_supplicants = pm2->pdata->num_supplicants;
+ /* pm2xxx_charger sub-class */
+ pm2->ac_chg.ops.enable = &pm2xxx_charger_ac_en;
+ pm2->ac_chg.ops.kick_wd = &pm2xxx_charger_watchdog_kick;
+ pm2->ac_chg.ops.update_curr = &pm2xxx_charger_update_charger_current;
+ pm2->ac_chg.max_out_volt = pm2xxx_charger_voltage_map[
+ ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
+ pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
+ ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
+ pm2->ac_chg.wdt_refresh = WD_KICK_INTERVAL;
+ pm2->ac_chg.enabled = true;
+ pm2->ac_chg.external = true;
+
+ /* Create a work queue for the charger */
+ pm2->charger_wq =
+ create_singlethread_workqueue("pm2xxx_charger_wq");
+ if (pm2->charger_wq == NULL) {
+ dev_err(pm2->dev, "failed to create work queue\n");
+ goto free_device_info;
+ }
+
+ /* Init work for charger detection */
+ INIT_WORK(&pm2->ac_work, pm2xxx_charger_ac_work);
+
+ /* Init work for checking HW status */
+ INIT_WORK(&pm2->check_main_thermal_prot_work,
+ pm2xxx_charger_check_main_thermal_prot_work);
+
+ /*
+ * VDD ADC supply needs to be enabled from this driver when there
+ * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+ * interrupts during charging
+ */
+ pm2->regu = regulator_get(pm2->dev, "vddadc");
+ if (IS_ERR(pm2->regu)) {
+ ret = PTR_ERR(pm2->regu);
+ dev_err(pm2->dev, "failed to get vddadc regulator\n");
+ goto free_charger_wq;
+ }
+
+ /* Register AC charger class */
+ ret = power_supply_register(pm2->dev, &pm2->ac_chg.psy);
+ if (ret) {
+ dev_err(pm2->dev, "failed to register AC charger\n");
+ goto free_regulator;
+ }
+
+ /* Register interrupts */
+ ret = request_threaded_irq(pm2->pdata->irq_number, NULL,
+ pm2xxx_charger_irq[0].isr,
+ pm2->pdata->irq_type,
+ pm2xxx_charger_irq[0].name, pm2);
+
+ if (ret != 0) {
+ dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
+ pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret);
+ goto unregister_pm2xxx_charger;
+ }
+
+ /*Initialize lock*/
+ mutex_init(&pm2->lock);
+
+ /*
+ * Charger detection mechanism requires pulling up the LPN pin
+ * while i2c communication if Charger is not connected
+ * LPN pin of PM2301 is GPIO60 of AB9540
+ */
+ ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
+ goto unregister_pm2xxx_charger;
+ }
+ ret = gpio_direction_output(pm2->lpn_pin, 0);
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
+ goto free_gpio;
+ }
+
+ ret = pm2xxx_charger_detection(pm2, &val);
+
+ if ((ret == 0) && val) {
+ pm2->ac.charger_connected = 1;
+ pm2->ac_conn = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
+ }
+
+ return 0;
+
+free_gpio:
+ gpio_free(pm2->lpn_pin);
+unregister_pm2xxx_charger:
+ /* unregister power supply */
+ power_supply_unregister(&pm2->ac_chg.psy);
+free_regulator:
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+free_charger_wq:
+ destroy_workqueue(pm2->charger_wq);
+free_device_info:
+ kfree(pm2);
+ return ret;
+}
+
+static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
+{
+ struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
+
+ /* Disable AC charging */
+ pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
+
+ /* Disable interrupts */
+ free_irq(pm2->pdata->irq_number, pm2);
+
+ /* Delete the work queue */
+ destroy_workqueue(pm2->charger_wq);
+
+ flush_scheduled_work();
+
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+
+ power_supply_unregister(&pm2->ac_chg.psy);
+
+ /*Free GPIO60*/
+ gpio_free(pm2->lpn_pin);
+
+ kfree(pm2);
+
+ return 0;
+}
+
+static const struct i2c_device_id pm2xxx_id[] = {
+ { "pm2301", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
+
+static struct i2c_driver pm2xxx_charger_driver = {
+ .probe = pm2xxx_wall_charger_probe,
+ .remove = __devexit_p(pm2xxx_wall_charger_remove),
+ .suspend = pm2xxx_wall_charger_suspend,
+ .resume = pm2xxx_wall_charger_resume,
+ .driver = {
+ .name = "pm2xxx-wall_charger",
+ .owner = THIS_MODULE,
+ },
+ .id_table = pm2xxx_id,
+};
+
+static int __init pm2xxx_charger_init(void)
+{
+ return i2c_add_driver(&pm2xxx_charger_driver);
+}
+
+static void __exit pm2xxx_charger_exit(void)
+{
+ i2c_del_driver(&pm2xxx_charger_driver);
+}
+
+subsys_initcall_sync(pm2xxx_charger_init);
+module_exit(pm2xxx_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
+MODULE_ALIAS("platform:pm2xxx-charger");
+MODULE_DESCRIPTION("PM2xxx charger management driver");
+
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
new file mode 100644
index 0000000..e6319cd
--- /dev/null
+++ b/drivers/power/pm2301_charger.h
@@ -0,0 +1,513 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * PM2301 power supply interface
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef PM2301_CHARGER_H
+#define PM2301_CHARGER_H
+
+#define MAIN_WDOG_ENA 0x01
+#define MAIN_WDOG_KICK 0x02
+#define MAIN_WDOG_DIS 0x00
+#define CHARG_WD_KICK 0x01
+#define MAIN_CH_ENA 0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
+#define MAIN_CH_DET 0x01
+#define MAIN_CH_CV_ON 0x04
+#define OTP_ENABLE_WD 0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT 4
+
+#define LED_INDICATOR_PWM_ENA 0x01
+#define LED_INDICATOR_PWM_DIS 0x00
+#define LED_IND_CUR_5MA 0x04
+#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT 0x02
+#define MAIN_CH_NOK 0x01
+
+/* Watchdog timeout constant */
+#define WD_TIMER 0x30 /* 4min */
+#define WD_KICK_INTERVAL (30 * HZ)
+
+#define PM2XXX_NUM_INT_REG 0x6
+
+/* Constant voltage/current */
+#define PM2XXX_CONST_CURR 0x0
+#define PM2XXX_CONST_VOLT 0x1
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG 0x4E
+
+#define PM2XXX_BATT_CTRL_REG1 0x00
+#define PM2XXX_BATT_CTRL_REG2 0x01
+#define PM2XXX_BATT_CTRL_REG3 0x02
+#define PM2XXX_BATT_CTRL_REG4 0x03
+#define PM2XXX_BATT_CTRL_REG5 0x04
+#define PM2XXX_BATT_CTRL_REG6 0x05
+#define PM2XXX_BATT_CTRL_REG7 0x06
+#define PM2XXX_BATT_CTRL_REG8 0x07
+#define PM2XXX_NTC_CTRL_REG1 0x08
+#define PM2XXX_NTC_CTRL_REG2 0x09
+#define PM2XXX_BATT_CTRL_REG9 0x0A
+#define PM2XXX_BATT_STAT_REG1 0x0B
+#define PM2XXX_INP_VOLT_VPWR2 0x11
+#define PM2XXX_INP_DROP_VPWR2 0x13
+#define PM2XXX_INP_VOLT_VPWR1 0x15
+#define PM2XXX_INP_DROP_VPWR1 0x17
+#define PM2XXX_INP_MODE_VPWR 0x18
+#define PM2XXX_BATT_WD_KICK 0x70
+#define PM2XXX_DEV_VER_STAT 0x0C
+#define PM2XXX_THERM_WARN_CTRL_REG 0x20
+#define PM2XXX_BATT_DISC_REG 0x21
+#define PM2XXX_BATT_LOW_LEV_COMP_REG 0x22
+#define PM2XXX_BATT_LOW_LEV_VAL_REG 0x23
+#define PM2XXX_I2C_PAD_CTRL_REG 0x24
+#define PM2XXX_SW_CTRL_REG 0x26
+#define PM2XXX_LED_CTRL_REG 0x28
+
+#define PM2XXX_REG_INT1 0x40
+#define PM2XXX_MASK_REG_INT1 0x50
+#define PM2XXX_SRCE_REG_INT1 0x60
+#define PM2XXX_REG_INT2 0x41
+#define PM2XXX_MASK_REG_INT2 0x51
+#define PM2XXX_SRCE_REG_INT2 0x61
+#define PM2XXX_REG_INT3 0x42
+#define PM2XXX_MASK_REG_INT3 0x52
+#define PM2XXX_SRCE_REG_INT3 0x62
+#define PM2XXX_REG_INT4 0x43
+#define PM2XXX_MASK_REG_INT4 0x53
+#define PM2XXX_SRCE_REG_INT4 0x63
+#define PM2XXX_REG_INT5 0x44
+#define PM2XXX_MASK_REG_INT5 0x54
+#define PM2XXX_SRCE_REG_INT5 0x64
+#define PM2XXX_REG_INT6 0x45
+#define PM2XXX_MASK_REG_INT6 0x55
+#define PM2XXX_SRCE_REG_INT6 0x65
+
+#define VPWR_OVV 0x0
+#define VSYSTEM_OVV 0x1
+
+/* control Reg 1 */
+#define PM2XXX_CH_RESUME_EN 0x1
+#define PM2XXX_CH_RESUME_DIS 0x0
+
+/* control Reg 2 */
+#define PM2XXX_CH_AUTO_RESUME_EN 0X2
+#define PM2XXX_CH_AUTO_RESUME_DIS 0X0
+#define PM2XXX_CHARGER_ENA 0x4
+#define PM2XXX_CHARGER_DIS 0x0
+
+/* control Reg 3 */
+#define PM2XXX_CH_WD_CC_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_CC_PHASE_5MIN 0x1
+#define PM2XXX_CH_WD_CC_PHASE_10MIN 0x2
+#define PM2XXX_CH_WD_CC_PHASE_30MIN 0x3
+#define PM2XXX_CH_WD_CC_PHASE_60MIN 0x4
+#define PM2XXX_CH_WD_CC_PHASE_120MIN 0x5
+#define PM2XXX_CH_WD_CC_PHASE_240MIN 0x6
+#define PM2XXX_CH_WD_CC_PHASE_360MIN 0x7
+
+#define PM2XXX_CH_WD_CV_PHASE_OFF (0x0<<3)
+#define PM2XXX_CH_WD_CV_PHASE_5MIN (0x1<<3)
+#define PM2XXX_CH_WD_CV_PHASE_10MIN (0x2<<3)
+#define PM2XXX_CH_WD_CV_PHASE_30MIN (0x3<<3)
+#define PM2XXX_CH_WD_CV_PHASE_60MIN (0x4<<3)
+#define PM2XXX_CH_WD_CV_PHASE_120MIN (0x5<<3)
+#define PM2XXX_CH_WD_CV_PHASE_240MIN (0x6<<3)
+#define PM2XXX_CH_WD_CV_PHASE_360MIN (0x7<<3)
+
+/* control Reg 4 */
+#define PM2XXX_CH_WD_PRECH_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_PRECH_PHASE_1MIN 0x1
+#define PM2XXX_CH_WD_PRECH_PHASE_5MIN 0x2
+#define PM2XXX_CH_WD_PRECH_PHASE_10MIN 0x3
+#define PM2XXX_CH_WD_PRECH_PHASE_30MIN 0x4
+#define PM2XXX_CH_WD_PRECH_PHASE_60MIN 0x5
+#define PM2XXX_CH_WD_PRECH_PHASE_120MIN 0x6
+#define PM2XXX_CH_WD_PRECH_PHASE_240MIN 0x7
+
+/* control Reg 5 */
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_NONE 0x0
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN 0x1
+
+/* control Reg 6 */
+#define PM2XXX_DIR_CH_CC_CURRENT_MASK 0x0F
+#define PM2XXX_DIR_CH_CC_CURRENT_200MA 0x0
+#define PM2XXX_DIR_CH_CC_CURRENT_400MA 0x2
+#define PM2XXX_DIR_CH_CC_CURRENT_600MA 0x3
+#define PM2XXX_DIR_CH_CC_CURRENT_800MA 0x4
+#define PM2XXX_DIR_CH_CC_CURRENT_1000MA 0x5
+#define PM2XXX_DIR_CH_CC_CURRENT_1200MA 0x6
+#define PM2XXX_DIR_CH_CC_CURRENT_1400MA 0x7
+#define PM2XXX_DIR_CH_CC_CURRENT_1600MA 0x8
+#define PM2XXX_DIR_CH_CC_CURRENT_1800MA 0x9
+#define PM2XXX_DIR_CH_CC_CURRENT_2000MA 0xA
+#define PM2XXX_DIR_CH_CC_CURRENT_2200MA 0xB
+#define PM2XXX_DIR_CH_CC_CURRENT_2400MA 0xC
+#define PM2XXX_DIR_CH_CC_CURRENT_2600MA 0xD
+#define PM2XXX_DIR_CH_CC_CURRENT_2800MA 0xE
+#define PM2XXX_DIR_CH_CC_CURRENT_3000MA 0xF
+
+#define PM2XXX_CH_PRECH_CURRENT_MASK 0x30
+#define PM2XXX_CH_PRECH_CURRENT_25MA (0x0<<4)
+#define PM2XXX_CH_PRECH_CURRENT_50MA (0x1<<4)
+#define PM2XXX_CH_PRECH_CURRENT_75MA (0x2<<4)
+#define PM2XXX_CH_PRECH_CURRENT_100MA (0x3<<4)
+
+#define PM2XXX_CH_EOC_CURRENT_MASK 0xC0
+#define PM2XXX_CH_EOC_CURRENT_100MA (0x0<<6)
+#define PM2XXX_CH_EOC_CURRENT_150MA (0x1<<6)
+#define PM2XXX_CH_EOC_CURRENT_300MA (0x2<<6)
+#define PM2XXX_CH_EOC_CURRENT_400MA (0x3<<6)
+
+/* control Reg 7 */
+#define PM2XXX_CH_PRECH_VOL_2_5 0x0
+#define PM2XXX_CH_PRECH_VOL_2_7 0x1
+#define PM2XXX_CH_PRECH_VOL_2_9 0x2
+#define PM2XXX_CH_PRECH_VOL_3_1 0x3
+
+#define PM2XXX_CH_VRESUME_VOL_3_2 (0x0<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_4 (0x1<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_6 (0x2<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_8 (0x3<<2)
+
+/* control Reg 8 */
+#define PM2XXX_CH_VOLT_MASK 0x3F
+#define PM2XXX_CH_VOLT_3_5 0x0
+#define PM2XXX_CH_VOLT_3_5225 0x1
+#define PM2XXX_CH_VOLT_3_6 0x4
+#define PM2XXX_CH_VOLT_3_7 0x8
+#define PM2XXX_CH_VOLT_4_0 0x14
+#define PM2XXX_CH_VOLT_4_175 0x1B
+#define PM2XXX_CH_VOLT_4_2 0x1C
+#define PM2XXX_CH_VOLT_4_275 0x1F
+#define PM2XXX_CH_VOLT_4_3 0x20
+
+/*NTC control register 1*/
+#define PM2XXX_BTEMP_HIGH_TH_45 0x0
+#define PM2XXX_BTEMP_HIGH_TH_50 0x1
+#define PM2XXX_BTEMP_HIGH_TH_55 0x2
+#define PM2XXX_BTEMP_HIGH_TH_60 0x3
+#define PM2XXX_BTEMP_HIGH_TH_65 0x4
+
+#define PM2XXX_BTEMP_LOW_TH_N5 (0x0<<3)
+#define PM2XXX_BTEMP_LOW_TH_0 (0x1<<3)
+#define PM2XXX_BTEMP_LOW_TH_5 (0x2<<3)
+#define PM2XXX_BTEMP_LOW_TH_10 (0x3<<3)
+
+/*NTC control register 2*/
+#define PM2XXX_NTC_BETA_COEFF_3477 0x0
+#define PM2XXX_NTC_BETA_COEFF_3964 0x1
+
+#define PM2XXX_NTC_RES_10K (0x0<<2)
+#define PM2XXX_NTC_RES_47K (0x1<<2)
+#define PM2XXX_NTC_RES_100K (0x2<<2)
+#define PM2XXX_NTC_RES_NO_NTC (0x3<<2)
+
+/* control Reg 9 */
+#define PM2XXX_CH_CC_MODEDROP_EN 1
+#define PM2XXX_CH_CC_MODEDROP_DIS 0
+
+#define PM2XXX_CH_CC_REDUCED_CURRENT_100MA (0x0<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_200MA (0x1<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_400MA (0x2<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_IDENT (0x3<<1)
+
+#define PM2XXX_CHARCHING_INFO_DIS (0<<3)
+#define PM2XXX_CHARCHING_INFO_EN (1<<3)
+
+#define PM2XXX_CH_150MV_DROP_300MV (0<<4)
+#define PM2XXX_CH_150MV_DROP_150MV (1<<4)
+
+
+/* charger status register */
+#define PM2XXX_CHG_STATUS_OFF 0x0
+#define PM2XXX_CHG_STATUS_ON 0x1
+#define PM2XXX_CHG_STATUS_FULL 0x2
+#define PM2XXX_CHG_STATUS_ERR 0x3
+#define PM2XXX_CHG_STATUS_WAIT 0x4
+#define PM2XXX_CHG_STATUS_NOBAT 0x5
+
+/* Input charger voltage VPWR2 */
+#define PM2XXX_VPWR2_OVV_6_0 0x0
+#define PM2XXX_VPWR2_OVV_6_3 0x1
+#define PM2XXX_VPWR2_OVV_10 0x2
+#define PM2XXX_VPWR2_OVV_NONE 0x3
+
+/* Input charger drop VPWR2 */
+#define PM2XXX_VPWR2_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR2_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR2_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR2_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR2_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR2_DROP_DIS (0x0<<2)
+
+/* Input charger voltage VPWR1 */
+#define PM2XXX_VPWR1_OVV_6_0 0x0
+#define PM2XXX_VPWR1_OVV_6_3 0x1
+#define PM2XXX_VPWR1_OVV_10 0x2
+#define PM2XXX_VPWR1_OVV_NONE 0x3
+
+/* Input charger drop VPWR1 */
+#define PM2XXX_VPWR1_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR1_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR1_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR1_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR1_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR1_DROP_DIS (0x0<<2)
+
+/* Battery low level comparator control register */
+#define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0
+#define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1
+
+/* Battery low level value control register */
+#define PM2XXX_VBAT_LOW_LEVEL_2_3 0x0
+#define PM2XXX_VBAT_LOW_LEVEL_2_4 0x1
+#define PM2XXX_VBAT_LOW_LEVEL_2_5 0x2
+#define PM2XXX_VBAT_LOW_LEVEL_2_6 0x3
+#define PM2XXX_VBAT_LOW_LEVEL_2_7 0x4
+#define PM2XXX_VBAT_LOW_LEVEL_2_8 0x5
+#define PM2XXX_VBAT_LOW_LEVEL_2_9 0x6
+#define PM2XXX_VBAT_LOW_LEVEL_3_0 0x7
+#define PM2XXX_VBAT_LOW_LEVEL_3_1 0x8
+#define PM2XXX_VBAT_LOW_LEVEL_3_2 0x9
+#define PM2XXX_VBAT_LOW_LEVEL_3_3 0xA
+#define PM2XXX_VBAT_LOW_LEVEL_3_4 0xB
+#define PM2XXX_VBAT_LOW_LEVEL_3_5 0xC
+#define PM2XXX_VBAT_LOW_LEVEL_3_6 0xD
+#define PM2XXX_VBAT_LOW_LEVEL_3_7 0xE
+#define PM2XXX_VBAT_LOW_LEVEL_3_8 0xF
+#define PM2XXX_VBAT_LOW_LEVEL_3_9 0x10
+#define PM2XXX_VBAT_LOW_LEVEL_4_0 0x11
+#define PM2XXX_VBAT_LOW_LEVEL_4_1 0x12
+#define PM2XXX_VBAT_LOW_LEVEL_4_2 0x13
+
+/* SW CTRL */
+#define PM2XXX_SWCTRL_HW 0x0
+#define PM2XXX_SWCTRL_SW 0x1
+
+
+/* LED Driver Control */
+#define PM2XXX_LED_CURRENT_MASK 0x0C
+#define PM2XXX_LED_CURRENT_2_5MA (0X0<<2)
+#define PM2XXX_LED_CURRENT_1MA (0X1<<2)
+#define PM2XXX_LED_CURRENT_5MA (0X2<<2)
+#define PM2XXX_LED_CURRENT_10MA (0X3<<2)
+
+#define PM2XXX_LED_SELECT_MASK 0x02
+#define PM2XXX_LED_SELECT_EN (0X0<<1)
+#define PM2XXX_LED_SELECT_DIS (0X1<<1)
+
+#define PM2XXX_ANTI_OVERSHOOT_MASK 0x01
+#define PM2XXX_ANTI_OVERSHOOT_DIS 0X0
+#define PM2XXX_ANTI_OVERSHOOT_EN 0X1
+
+enum pm2xxx_reg_int1 {
+ PM2XXX_INT1_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_mask_reg_int1 {
+ PM2XXX_INT1_M_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_M_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_M_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_source_reg_int1 {
+ PM2XXX_INT1_S_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_S_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_S_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_reg_int2 {
+ PM2XXX_INT2_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_mask_reg_int2 {
+ PM2XXX_INT2_M_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_M_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_M_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_M_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_source_reg_int2 {
+ PM2XXX_INT2_S_ITVPWR2PLUG = 0x03,
+ PM2XXX_INT2_S_ITVPWR1PLUG = 0x0c,
+};
+
+enum pm2xxx_reg_int3 {
+ PM2XXX_INT3_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_ITCHCCWD = 0x02,
+ PM2XXX_INT3_ITCHCVWD = 0x04,
+ PM2XXX_INT3_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_mask_reg_int3 {
+ PM2XXX_INT3_M_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_M_ITCHCCWD = 0x02,
+ PM2XXX_INT3_M_ITCHCVWD = 0x04,
+ PM2XXX_INT3_M_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_source_reg_int3 {
+ PM2XXX_INT3_S_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_S_ITCHCCWD = 0x02,
+ PM2XXX_INT3_S_ITCHCVWD = 0x04,
+ PM2XXX_INT3_S_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_reg_int4 {
+ PM2XXX_INT4_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_ITVRESUME = 0x20,
+ PM2XXX_INT4_ITBATTFULL = 0x40,
+ PM2XXX_INT4_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_mask_reg_int4 {
+ PM2XXX_INT4_M_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_M_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_M_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_M_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_M_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_M_ITVRESUME = 0x20,
+ PM2XXX_INT4_M_ITBATTFULL = 0x40,
+ PM2XXX_INT4_M_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_source_reg_int4 {
+ PM2XXX_INT4_S_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_S_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_S_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_S_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_S_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_S_ITVRESUME = 0x20,
+ PM2XXX_INT4_S_ITBATTFULL = 0x40,
+ PM2XXX_INT4_S_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_reg_int5 {
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_mask_reg_int5 {
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_M_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_M_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_M_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_source_reg_int5 {
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_S_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_S_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_S_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_reg_int6 {
+ PM2XXX_INT6_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_mask_reg_int6 {
+ PM2XXX_INT6_M_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_M_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_M_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_M_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_M_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_M_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_source_reg_int6 {
+ PM2XXX_INT6_S_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_S_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_S_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_S_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_S_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_S_ITVPWR1VALIDFALL = 0x20,
+};
+
+struct pm2xxx_charger_info {
+ int charger_connected;
+ int charger_online;
+ int cv_active;
+ bool wd_expired;
+};
+
+struct pm2xxx_charger_event_flags {
+ bool mainextchnotok;
+ bool main_thermal_prot;
+ bool ovv;
+ bool chgwdexp;
+};
+
+struct pm2xxx_interrupts {
+ u8 reg[PM2XXX_NUM_INT_REG];
+ int (*handler[PM2XXX_NUM_INT_REG])(void *, int);
+};
+
+struct pm2xxx_config {
+ struct i2c_client *pm2xxx_i2c;
+ struct i2c_device_id *pm2xxx_id;
+};
+
+struct pm2xxx_irq {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct pm2xxx_charger {
+ struct device *dev;
+ u8 chip_id;
+ bool vddadc_en_ac;
+ struct pm2xxx_config config;
+ bool ac_conn;
+ unsigned int gpio_irq;
+ int vbat;
+ int old_vbat;
+ int failure_case;
+ int failure_input_ovv;
+ unsigned int lpn_pin;
+ struct pm2xxx_interrupts *pm2_int;
+ struct ab8500_gpadc *gpadc;
+ struct regulator *regu;
+ struct pm2xxx_bm_data *bat;
+ struct mutex lock;
+ struct ab8500 *parent;
+ struct pm2xxx_charger_info ac;
+ struct pm2xxx_charger_platform_data *pdata;
+ struct workqueue_struct *charger_wq;
+ struct delayed_work check_vbat_work;
+ struct work_struct ac_work;
+ struct work_struct check_main_thermal_prot_work;
+ struct ux500_charger ac_chg;
+ struct pm2xxx_charger_event_flags flags;
+};
+
+#endif /* PM2301_CHARGER_H */
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 40fa3b7..29178f7 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -55,7 +55,8 @@ static ssize_t power_supply_show_property(struct device *dev,
};
static char *health_text[] = {
"Unknown", "Good", "Overheat", "Dead", "Over voltage",
- "Unspecified failure", "Cold",
+ "Unspecified failure", "Cold", "Watchdog timer expire",
+ "Safety timer expire"
};
static char *technology_text[] = {
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6461b48..1ae65b8 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -13,3 +13,20 @@ config POWER_RESET_GPIO
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+ bool "QNAP power-off driver"
+ depends on OF_GPIO && POWER_RESET && PLAT_ORION
+ help
+ This driver supports turning off QNAP NAS devices by sending
+ commands to the microcontroller which controls the main power.
+
+ Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+ bool "Restart power-off driver"
+ depends on ARM
+ help
+ Some boards don't actually have the ability to power off.
+ Instead they restart, and u-boot holds the SoC until the
+ user presses a key. u-boot then boots into Linux.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 751488a..0f317f5 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o \ No newline at end of file
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
new file mode 100644
index 0000000..37f56f7
--- /dev/null
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,116 @@
+/*
+ * QNAP Turbo NAS Board power off
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x) (base + ((UART_##x) << 2))
+
+static void __iomem *base;
+static unsigned long tclk;
+
+static void qnap_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_err("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *clk;
+ char symname[KSYM_NAME_LEN];
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing resource");
+ return -EINVAL;
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "Unable to map resource");
+ return -EINVAL;
+ }
+
+ /* We need to know tclk in order to calculate the UART divisor */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Clk missing");
+ return PTR_ERR(clk);
+ }
+
+ tclk = clk_get_rate(clk);
+
+ /* Check that nothing else has already setup a handler */
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ dev_err(&pdev->dev,
+ "pm_power_off already claimed %p %s",
+ pm_power_off, symname);
+ return -EBUSY;
+ }
+ pm_power_off = qnap_power_off;
+
+ return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+ pm_power_off = NULL;
+ return 0;
+}
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static struct platform_driver qnap_power_off_driver = {
+ .probe = qnap_power_off_probe,
+ .remove = qnap_power_off_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "qnap_power_off",
+ .of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+ },
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c
new file mode 100644
index 0000000..059cd15
--- /dev/null
+++ b/drivers/power/reset/restart-poweroff.c
@@ -0,0 +1,65 @@
+/*
+ * Power off by restarting and let u-boot keep hold of the machine
+ * until the user presses a button for example.
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Andrew Lunn
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static void restart_poweroff_do_poweroff(void)
+{
+ arm_pm_restart('h', NULL);
+}
+
+static int restart_poweroff_probe(struct platform_device *pdev)
+{
+ /* If a pm_power_off function has already been added, leave it alone */
+ if (pm_power_off != NULL) {
+ dev_err(&pdev->dev,
+ "pm_power_off function already registered");
+ return -EBUSY;
+ }
+
+ pm_power_off = &restart_poweroff_do_poweroff;
+ return 0;
+}
+
+static int restart_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == &restart_poweroff_do_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id of_restart_poweroff_match[] = {
+ { .compatible = "restart-poweroff", },
+ {},
+};
+
+static struct platform_driver restart_poweroff_driver = {
+ .probe = restart_poweroff_probe,
+ .remove = restart_poweroff_remove,
+ .driver = {
+ .name = "poweroff-restart",
+ .owner = THIS_MODULE,
+ .of_match_table = of_restart_poweroff_match,
+ },
+};
+module_platform_driver(restart_poweroff_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("restart poweroff driver");
+MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:poweroff-restart");
OpenPOWER on IntegriCloud