Revert "platform: x86: dell-laptop: Add support for keyboard backlight"

This reverts commit 02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188.

This interface was determined to be flawed and required too invasive a
fix for the RC cycle. This will be revisited in 3.20.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>

1 files changed, 6 insertions, 1049 deletions

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 9411eae3..3d21efe 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -2,11 +2,9 @@
  *  Driver for Dell laptop extras
  *
  *  Copyright (c) Red Hat <mjg@redhat.com>
- *  Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- *  Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
  *
- *  Based on documentation in the libsmbios package:
- *  Copyright (C) 2005-2014 Dell Inc.
+ *  Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
+ *  Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -34,13 +32,6 @@
 #include "../../firmware/dcdbas.h"
 
 #define BRIGHTNESS_TOKEN 0x7d
-#define KBD_LED_OFF_TOKEN 0x01E1
-#define KBD_LED_ON_TOKEN 0x01E2
-#define KBD_LED_AUTO_TOKEN 0x01E3
-#define KBD_LED_AUTO_25_TOKEN 0x02EA
-#define KBD_LED_AUTO_50_TOKEN 0x02EB
-#define KBD_LED_AUTO_75_TOKEN 0x02EC
-#define KBD_LED_AUTO_100_TOKEN 0x02F6
 
 /* This structure will be modified by the firmware when we enter
  * system management mode, hence the volatiles */
@@ -71,13 +62,6 @@ struct calling_interface_structure {
 
 struct quirk_entry {
 	u8 touchpad_led;
-
-	int needs_kbd_timeouts;
-	/*
-	 * Ordered list of timeouts expressed in seconds.
-	 * The list must end with -1
-	 */
-	int kbd_timeouts[];
 };
 
 static struct quirk_entry *quirks;
@@ -92,15 +76,6 @@ static int __init dmi_matched(const struct dmi_system_id *dmi)
 	return 1;
 }
 
-/*
- * These values come from Windows utility provided by Dell. If any other value
- * is used then BIOS silently set timeout to 0 without any error message.
- */
-static struct quirk_entry quirk_dell_xps13_9333 = {
-	.needs_kbd_timeouts = 1,
-	.kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 },
-};
-
 static int da_command_address;
 static int da_command_code;
 static int da_num_tokens;
@@ -292,15 +267,6 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_dell_vostro_v130,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell XPS13 9333",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"),
-		},
-		.driver_data = &quirk_dell_xps13_9333,
-	},
 	{ }
 };
 
@@ -365,29 +331,17 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy)
 	}
 }
 
-static int find_token_id(int tokenid)
+static int find_token_location(int tokenid)
 {
 	int i;
-
 	for (i = 0; i < da_num_tokens; i++) {
 		if (da_tokens[i].tokenID == tokenid)
-			return i;
+			return da_tokens[i].location;
 	}
 
 	return -1;
 }
 
-static int find_token_location(int tokenid)
-{
-	int id;
-
-	id = find_token_id(tokenid);
-	if (id == -1)
-		return -1;
-
-	return da_tokens[id].location;
-}
-
 static struct calling_interface_buffer *
 dell_send_request(struct calling_interface_buffer *buffer, int class,
 		  int select)
@@ -408,20 +362,6 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
 	return buffer;
 }
 
-static inline int dell_smi_error(int value)
-{
-	switch (value) {
-	case 0: /* Completed successfully */
-		return 0;
-	case -1: /* Completed with error */
-		return -EIO;
-	case -2: /* Function not supported */
-		return -ENXIO;
-	default: /* Unknown error */
-		return -EINVAL;
-	}
-}
-
 /* Derived from information in DellWirelessCtl.cpp:
    Class 17, select 11 is radio control. It returns an array of 32-bit values.
 
@@ -776,7 +716,7 @@ static int dell_send_intensity(struct backlight_device *bd)
 	else
 		dell_send_request(buffer, 1, 1);
 
- out:
+out:
 	release_buffer();
 	return ret;
 }
@@ -800,7 +740,7 @@ static int dell_get_intensity(struct backlight_device *bd)
 
 	ret = buffer->output[1];
 
- out:
+out:
 	release_buffer();
 	return ret;
 }
@@ -849,984 +789,6 @@ static void touchpad_led_exit(void)
 	led_classdev_unregister(&touchpad_led);
 }
 
-/*
- * Derived from information in smbios-keyboard-ctl:
- *
- * cbClass 4
- * cbSelect 11
- * Keyboard illumination
- * cbArg1 determines the function to be performed
- *
- * cbArg1 0x0 = Get Feature Information
- *  cbRES1         Standard return codes (0, -1, -2)
- *  cbRES2, word0  Bitmap of user-selectable modes
- *     bit 0     Always off (All systems)
- *     bit 1     Always on (Travis ATG, Siberia)
- *     bit 2     Auto: ALS-based On; ALS-based Off (Travis ATG)
- *     bit 3     Auto: ALS- and input-activity-based On; input-activity based Off
- *     bit 4     Auto: Input-activity-based On; input-activity based Off
- *     bit 5     Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- *     bit 6     Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- *     bit 7     Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- *     bit 8     Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- *     bits 9-15 Reserved for future use
- *  cbRES2, byte2  Reserved for future use
- *  cbRES2, byte3  Keyboard illumination type
- *     0         Reserved
- *     1         Tasklight
- *     2         Backlight
- *     3-255     Reserved for future use
- *  cbRES3, byte0  Supported auto keyboard illumination trigger bitmap.
- *     bit 0     Any keystroke
- *     bit 1     Touchpad activity
- *     bit 2     Pointing stick
- *     bit 3     Any mouse
- *     bits 4-7  Reserved for future use
- *  cbRES3, byte1  Supported timeout unit bitmap
- *     bit 0     Seconds
- *     bit 1     Minutes
- *     bit 2     Hours
- *     bit 3     Days
- *     bits 4-7  Reserved for future use
- *  cbRES3, byte2  Number of keyboard light brightness levels
- *  cbRES4, byte0  Maximum acceptable seconds value (0 if seconds not supported).
- *  cbRES4, byte1  Maximum acceptable minutes value (0 if minutes not supported).
- *  cbRES4, byte2  Maximum acceptable hours value (0 if hours not supported).
- *  cbRES4, byte3  Maximum acceptable days value (0 if days not supported)
- *
- * cbArg1 0x1 = Get Current State
- *  cbRES1         Standard return codes (0, -1, -2)
- *  cbRES2, word0  Bitmap of current mode state
- *     bit 0     Always off (All systems)
- *     bit 1     Always on (Travis ATG, Siberia)
- *     bit 2     Auto: ALS-based On; ALS-based Off (Travis ATG)
- *     bit 3     Auto: ALS- and input-activity-based On; input-activity based Off
- *     bit 4     Auto: Input-activity-based On; input-activity based Off
- *     bit 5     Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- *     bit 6     Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- *     bit 7     Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- *     bit 8     Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- *     bits 9-15 Reserved for future use
- *     Note: Only One bit can be set
- *  cbRES2, byte2  Currently active auto keyboard illumination triggers.
- *     bit 0     Any keystroke
- *     bit 1     Touchpad activity
- *     bit 2     Pointing stick
- *     bit 3     Any mouse
- *     bits 4-7  Reserved for future use
- *  cbRES2, byte3  Current Timeout
- *     bits 7:6  Timeout units indicator:
- *     00b       Seconds
- *     01b       Minutes
- *     10b       Hours
- *     11b       Days
- *     bits 5:0  Timeout value (0-63) in sec/min/hr/day
- *     NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte
- *     are set upon return from the [Get feature information] call.
- *  cbRES3, byte0  Current setting of ALS value that turns the light on or off.
- *  cbRES3, byte1  Current ALS reading
- *  cbRES3, byte2  Current keyboard light level.
- *
- * cbArg1 0x2 = Set New State
- *  cbRES1         Standard return codes (0, -1, -2)
- *  cbArg2, word0  Bitmap of current mode state
- *     bit 0     Always off (All systems)
- *     bit 1     Always on (Travis ATG, Siberia)
- *     bit 2     Auto: ALS-based On; ALS-based Off (Travis ATG)
- *     bit 3     Auto: ALS- and input-activity-based On; input-activity based Off
- *     bit 4     Auto: Input-activity-based On; input-activity based Off
- *     bit 5     Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- *     bit 6     Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- *     bit 7     Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- *     bit 8     Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- *     bits 9-15 Reserved for future use
- *     Note: Only One bit can be set
- *  cbArg2, byte2  Desired auto keyboard illumination triggers. Must remain inactive to allow
- *                 keyboard to turn off automatically.
- *     bit 0     Any keystroke
- *     bit 1     Touchpad activity
- *     bit 2     Pointing stick
- *     bit 3     Any mouse
- *     bits 4-7  Reserved for future use
- *  cbArg2, byte3  Desired Timeout
- *     bits 7:6  Timeout units indicator:
- *     00b       Seconds
- *     01b       Minutes
- *     10b       Hours
- *     11b       Days
- *     bits 5:0  Timeout value (0-63) in sec/min/hr/day
- *  cbArg3, byte0  Desired setting of ALS value that turns the light on or off.
- *  cbArg3, byte2  Desired keyboard light level.
- */
-
-
-enum kbd_timeout_unit {
-	KBD_TIMEOUT_SECONDS = 0,
-	KBD_TIMEOUT_MINUTES,
-	KBD_TIMEOUT_HOURS,
-	KBD_TIMEOUT_DAYS,
-};
-
-enum kbd_mode_bit {
-	KBD_MODE_BIT_OFF = 0,
-	KBD_MODE_BIT_ON,
-	KBD_MODE_BIT_ALS,
-	KBD_MODE_BIT_TRIGGER_ALS,
-	KBD_MODE_BIT_TRIGGER,
-	KBD_MODE_BIT_TRIGGER_25,
-	KBD_MODE_BIT_TRIGGER_50,
-	KBD_MODE_BIT_TRIGGER_75,
-	KBD_MODE_BIT_TRIGGER_100,
-};
-
-#define kbd_is_als_mode_bit(bit) \
-	((bit) == KBD_MODE_BIT_ALS || (bit) == KBD_MODE_BIT_TRIGGER_ALS)
-#define kbd_is_trigger_mode_bit(bit) \
-	((bit) >= KBD_MODE_BIT_TRIGGER_ALS && (bit) <= KBD_MODE_BIT_TRIGGER_100)
-#define kbd_is_level_mode_bit(bit) \
-	((bit) >= KBD_MODE_BIT_TRIGGER_25 && (bit) <= KBD_MODE_BIT_TRIGGER_100)
-
-struct kbd_info {
-	u16 modes;
-	u8 type;
-	u8 triggers;
-	u8 levels;
-	u8 seconds;
-	u8 minutes;
-	u8 hours;
-	u8 days;
-};
-
-struct kbd_state {
-	u8 mode_bit;
-	u8 triggers;
-	u8 timeout_value;
-	u8 timeout_unit;
-	u8 als_setting;
-	u8 als_value;
-	u8 level;
-};
-
-static const int kbd_tokens[] = {
-	KBD_LED_OFF_TOKEN,
-	KBD_LED_AUTO_25_TOKEN,
-	KBD_LED_AUTO_50_TOKEN,
-	KBD_LED_AUTO_75_TOKEN,
-	KBD_LED_AUTO_100_TOKEN,
-	KBD_LED_ON_TOKEN,
-};
-
-static u16 kbd_token_bits;
-
-static struct kbd_info kbd_info;
-static bool kbd_als_supported;
-static bool kbd_triggers_supported;
-
-static u8 kbd_mode_levels[16];
-static int kbd_mode_levels_count;
-
-static u8 kbd_previous_level;
-static u8 kbd_previous_mode_bit;
-
-static bool kbd_led_present;
-
-/*
- * NOTE: there are three ways to set the keyboard backlight level.
- * First, via kbd_state.mode_bit (assigning KBD_MODE_BIT_TRIGGER_* value).
- * Second, via kbd_state.level (assigning numerical value <= kbd_info.levels).
- * Third, via SMBIOS tokens (KBD_LED_* in kbd_tokens)
- *
- * There are laptops which support only one of these methods. If we want to
- * support as many machines as possible we need to implement all three methods.
- * The first two methods use the kbd_state structure. The third uses SMBIOS
- * tokens. If kbd_info.levels == 0, the machine does not support setting the
- * keyboard backlight level via kbd_state.level.
- */
-
-static int kbd_get_info(struct kbd_info *info)
-{
-	u8 units;
-	int ret;
-
-	get_buffer();
-
-	buffer->input[0] = 0x0;
-	dell_send_request(buffer, 4, 11);
-	ret = buffer->output[0];
-
-	if (ret) {
-		ret = dell_smi_error(ret);
-		goto out;
-	}
-
-	info->modes = buffer->output[1] & 0xFFFF;
-	info->type = (buffer->output[1] >> 24) & 0xFF;
-	info->triggers = buffer->output[2] & 0xFF;
-	units = (buffer->output[2] >> 8) & 0xFF;
-	info->levels = (buffer->output[2] >> 16) & 0xFF;
-
-	if (units & BIT(0))
-		info->seconds = (buffer->output[3] >> 0) & 0xFF;
-	if (units & BIT(1))
-		info->minutes = (buffer->output[3] >> 8) & 0xFF;
-	if (units & BIT(2))
-		info->hours = (buffer->output[3] >> 16) & 0xFF;
-	if (units & BIT(3))
-		info->days = (buffer->output[3] >> 24) & 0xFF;
-
- out:
-	release_buffer();
-	return ret;
-}
-
-static unsigned int kbd_get_max_level(void)
-{
-	if (kbd_info.levels != 0)
-		return kbd_info.levels;
-	if (kbd_mode_levels_count > 0)
-		return kbd_mode_levels_count - 1;
-	return 0;
-}
-
-static int kbd_get_level(struct kbd_state *state)
-{
-	int i;
-
-	if (kbd_info.levels != 0)
-		return state->level;
-
-	if (kbd_mode_levels_count > 0) {
-		for (i = 0; i < kbd_mode_levels_count; ++i)
-			if (kbd_mode_levels[i] == state->mode_bit)
-				return i;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int kbd_set_level(struct kbd_state *state, u8 level)
-{
-	if (kbd_info.levels != 0) {
-		if (level != 0)
-			kbd_previous_level = level;
-		if (state->level == level)
-			return 0;
-		state->level = level;
-		if (level != 0 && state->mode_bit == KBD_MODE_BIT_OFF)
-			state->mode_bit = kbd_previous_mode_bit;
-		else if (level == 0 && state->mode_bit != KBD_MODE_BIT_OFF) {
-			kbd_previous_mode_bit = state->mode_bit;
-			state->mode_bit = KBD_MODE_BIT_OFF;
-		}
-		return 0;
-	}
-
-	if (kbd_mode_levels_count > 0 && level < kbd_mode_levels_count) {
-		if (level != 0)
-			kbd_previous_level = level;
-		state->mode_bit = kbd_mode_levels[level];
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int kbd_get_state(struct kbd_state *state)
-{
-	int ret;
-
-	get_buffer();
-
-	buffer->input[0] = 0x1;
-	dell_send_request(buffer, 4, 11);
-	ret = buffer->output[0];
-
-	if (ret) {
-		ret = dell_smi_error(ret);
-		goto out;
-	}
-
-	state->mode_bit = ffs(buffer->output[1] & 0xFFFF);
-	if (state->mode_bit != 0)
-		state->mode_bit--;
-
-	state->triggers = (buffer->output[1] >> 16) & 0xFF;
-	state->timeout_value = (buffer->output[1] >> 24) & 0x3F;
-	state->timeout_unit = (buffer->output[1] >> 30) & 0x3;
-	state->als_setting = buffer->output[2] & 0xFF;
-	state->als_value = (buffer->output[2] >> 8) & 0xFF;
-	state->level = (buffer->output[2] >> 16) & 0xFF;
-
- out:
-	release_buffer();
-	return ret;
-}
-
-static int kbd_set_state(struct kbd_state *state)
-{
-	int ret;
-
-	get_buffer();
-	buffer->input[0] = 0x2;
-	buffer->input[1] = BIT(state->mode_bit) & 0xFFFF;
-	buffer->input[1] |= (state->triggers & 0xFF) << 16;
-	buffer->input[1] |= (state->timeout_value & 0x3F) << 24;
-	buffer->input[1] |= (state->timeout_unit & 0x3) << 30;
-	buffer->input[2] = state->als_setting & 0xFF;
-	buffer->input[2] |= (state->level & 0xFF) << 16;
-	dell_send_request(buffer, 4, 11);
-	ret = buffer->output[0];
-	release_buffer();
-
-	return dell_smi_error(ret);
-}
-
-static int kbd_set_state_safe(struct kbd_state *state, struct kbd_state *old)
-{
-	int ret;
-
-	ret = kbd_set_state(state);
-	if (ret == 0)
-		return 0;
-
-	/*
-	 * When setting the new state fails,try to restore the previous one.
-	 * This is needed on some machines where BIOS sets a default state when
-	 * setting a new state fails. This default state could be all off.
-	 */
-
-	if (kbd_set_state(old))
-		pr_err("Setting old previous keyboard state failed\n");
-
-	return ret;
-}
-
-static int kbd_set_token_bit(u8 bit)
-{
-	int id;
-	int ret;
-
-	if (bit >= ARRAY_SIZE(kbd_tokens))
-		return -EINVAL;
-
-	id = find_token_id(kbd_tokens[bit]);
-	if (id == -1)
-		return -EINVAL;
-
-	get_buffer();
-	buffer->input[0] = da_tokens[id].location;
-	buffer->input[1] = da_tokens[id].value;
-	dell_send_request(buffer, 1, 0);
-	ret = buffer->output[0];
-	release_buffer();
-
-	return dell_smi_error(ret);
-}
-
-static int kbd_get_token_bit(u8 bit)
-{
-	int id;
-	int ret;
-	int val;
-
-	if (bit >= ARRAY_SIZE(kbd_tokens))
-		return -EINVAL;
-
-	id = find_token_id(kbd_tokens[bit]);
-	if (id == -1)
-		return -EINVAL;
-
-	get_buffer();
-	buffer->input[0] = da_tokens[id].location;
-	dell_send_request(buffer, 0, 0);
-	ret = buffer->output[0];
-	val = buffer->output[1];
-	release_buffer();
-
-	if (ret)
-		return dell_smi_error(ret);
-
-	return (val == da_tokens[id].value);
-}
-
-static int kbd_get_first_active_token_bit(void)
-{
-	int i;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i) {
-		ret = kbd_get_token_bit(i);
-		if (ret == 1)
-			return i;
-	}
-
-	return ret;
-}
-
-static int kbd_get_valid_token_counts(void)
-{
-	return hweight16(kbd_token_bits);
-}
-
-static inline int kbd_init_info(void)
-{
-	struct kbd_state state;
-	int ret;
-	int i;
-
-	ret = kbd_get_info(&kbd_info);
-	if (ret)
-		return ret;
-
-	kbd_get_state(&state);
-
-	/* NOTE: timeout value is stored in 6 bits so max value is 63 */
-	if (kbd_info.seconds > 63)
-		kbd_info.seconds = 63;
-	if (kbd_info.minutes > 63)
-		kbd_info.minutes = 63;
-	if (kbd_info.hours > 63)
-		kbd_info.hours = 63;
-	if (kbd_info.days > 63)
-		kbd_info.days = 63;
-
-	/* NOTE: On tested machines ON mode did not work and caused
-	 *       problems (turned backlight off) so do not use it
-	 */
-	kbd_info.modes &= ~BIT(KBD_MODE_BIT_ON);
-
-	kbd_previous_level = kbd_get_level(&state);
-	kbd_previous_mode_bit = state.mode_bit;
-
-	if (kbd_previous_level == 0 && kbd_get_max_level() != 0)
-		kbd_previous_level = 1;
-
-	if (kbd_previous_mode_bit == KBD_MODE_BIT_OFF) {
-		kbd_previous_mode_bit =
-			ffs(kbd_info.modes & ~BIT(KBD_MODE_BIT_OFF));
-		if (kbd_previous_mode_bit != 0)
-			kbd_previous_mode_bit--;
-	}
-
-	if (kbd_info.modes & (BIT(KBD_MODE_BIT_ALS) |
-			      BIT(KBD_MODE_BIT_TRIGGER_ALS)))
-		kbd_als_supported = true;
-
-	if (kbd_info.modes & (
-	    BIT(KBD_MODE_BIT_TRIGGER_ALS) | BIT(KBD_MODE_BIT_TRIGGER) |
-	    BIT(KBD_MODE_BIT_TRIGGER_25) | BIT(KBD_MODE_BIT_TRIGGER_50) |
-	    BIT(KBD_MODE_BIT_TRIGGER_75) | BIT(KBD_MODE_BIT_TRIGGER_100)
-	   ))
-		kbd_triggers_supported = true;
-
-	/* kbd_mode_levels[0] is reserved, see below */
-	for (i = 0; i < 16; ++i)
-		if (kbd_is_level_mode_bit(i) && (BIT(i) & kbd_info.modes))
-			kbd_mode_levels[1 + kbd_mode_levels_count++] = i;
-
-	/*
-	 * Find the first supported mode and assign to kbd_mode_levels[0].
-	 * This should be 0 (off), but we cannot depend on the BIOS to
-	 * support 0.
-	 */
-	if (kbd_mode_levels_count > 0) {
-		for (i = 0; i < 16; ++i) {
-			if (BIT(i) & kbd_info.modes) {
-				kbd_mode_levels[0] = i;
-				break;
-			}
-		}
-		kbd_mode_levels_count++;
-	}
-
-	return 0;
-
-}
-
-static inline void kbd_init_tokens(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i)
-		if (find_token_id(kbd_tokens[i]) != -1)
-			kbd_token_bits |= BIT(i);
-}
-
-static void kbd_init(void)
-{
-	int ret;
-
-	ret = kbd_init_info();
-	kbd_init_tokens();
-
-	if (kbd_token_bits != 0 || ret == 0)
-		kbd_led_present = true;
-}
-
-static ssize_t kbd_led_timeout_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	struct kbd_state new_state;
-	struct kbd_state state;
-	bool convert;
-	int value;
-	int ret;
-	char ch;
-	u8 unit;
-	int i;
-
-	ret = sscanf(buf, "%d %c", &value, &ch);
-	if (ret < 1)
-		return -EINVAL;
-	else if (ret == 1)
-		ch = 's';
-
-	if (value < 0)
-		return -EINVAL;
-
-	convert = false;
-
-	switch (ch) {
-	case 's':
-		if (value > kbd_info.seconds)
-			convert = true;
-		unit = KBD_TIMEOUT_SECONDS;
-		break;
-	case 'm':
-		if (value > kbd_info.minutes)
-			convert = true;
-		unit = KBD_TIMEOUT_MINUTES;
-		break;
-	case 'h':
-		if (value > kbd_info.hours)
-			convert = true;
-		unit = KBD_TIMEOUT_HOURS;
-		break;
-	case 'd':
-		if (value > kbd_info.days)
-			convert = true;
-		unit = KBD_TIMEOUT_DAYS;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (quirks && quirks->needs_kbd_timeouts)
-		convert = true;
-
-	if (convert) {
-		/* Convert value from current units to seconds */
-		switch (unit) {
-		case KBD_TIMEOUT_DAYS:
-			value *= 24;
-		case KBD_TIMEOUT_HOURS:
-			value *= 60;
-		case KBD_TIMEOUT_MINUTES:
-			value *= 60;
-			unit = KBD_TIMEOUT_SECONDS;
-		}
-
-		if (quirks && quirks->needs_kbd_timeouts) {
-			for (i = 0; quirks->kbd_timeouts[i] != -1; i++) {
-				if (value <= quirks->kbd_timeouts[i]) {
-					value = quirks->kbd_timeouts[i];
-					break;
-				}
-			}
-		}
-
-		if (value <= kbd_info.seconds && kbd_info.seconds) {
-			unit = KBD_TIMEOUT_SECONDS;
-		} else if (value / 60 <= kbd_info.minutes && kbd_info.minutes) {
-			value /= 60;
-			unit = KBD_TIMEOUT_MINUTES;
-		} else if (value / (60 * 60) <= kbd_info.hours && kbd_info.hours) {
-			value /= (60 * 60);
-			unit = KBD_TIMEOUT_HOURS;
-		} else if (value / (60 * 60 * 24) <= kbd_info.days && kbd_info.days) {
-			value /= (60 * 60 * 24);
-			unit = KBD_TIMEOUT_DAYS;
-		} else {
-			return -EINVAL;
-		}
-	}
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	new_state = state;
-	new_state.timeout_value = value;
-	new_state.timeout_unit = unit;
-
-	ret = kbd_set_state_safe(&new_state, &state);
-	if (ret)
-		return ret;
-
-	return count;
-}
-
-static ssize_t kbd_led_timeout_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	struct kbd_state state;
-	int ret;
-	int len;
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	len = sprintf(buf, "%d", state.timeout_value);
-
-	switch (state.timeout_unit) {
-	case KBD_TIMEOUT_SECONDS:
-		return len + sprintf(buf+len, "s\n");
-	case KBD_TIMEOUT_MINUTES:
-		return len + sprintf(buf+len, "m\n");
-	case KBD_TIMEOUT_HOURS:
-		return len + sprintf(buf+len, "h\n");
-	case KBD_TIMEOUT_DAYS:
-		return len + sprintf(buf+len, "d\n");
-	default:
-		return -EINVAL;
-	}
-
-	return len;
-}
-
-static DEVICE_ATTR(stop_timeout, S_IRUGO | S_IWUSR,
-		   kbd_led_timeout_show, kbd_led_timeout_store);
-
-static const char * const kbd_led_triggers[] = {
-	"keyboard",
-	"touchpad",
-	/*"trackstick"*/ NULL, /* NOTE: trackstick is just alias for touchpad */
-	"mouse",
-};
-
-static ssize_t kbd_led_triggers_store(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf, size_t count)
-{
-	struct kbd_state new_state;
-	struct kbd_state state;
-	bool triggers_enabled = false;
-	bool als_enabled = false;
-	bool disable_als = false;
-	bool enable_als = false;
-	int trigger_bit = -1;
-	char trigger[21];
-	int i, ret;
-
-	ret = sscanf(buf, "%20s", trigger);
-	if (ret != 1)
-		return -EINVAL;
-
-	if (trigger[0] != '+' && trigger[0] != '-')
-		return -EINVAL;
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	if (kbd_als_supported)
-		als_enabled = kbd_is_als_mode_bit(state.mode_bit);
-
-	if (kbd_triggers_supported)
-		triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
-
-	if (kbd_als_supported) {
-		if (strcmp(trigger, "+als") == 0) {
-			if (als_enabled)
-				return count;
-			enable_als = true;
-		} else if (strcmp(trigger, "-als") == 0) {
-			if (!als_enabled)
-				return count;
-			disable_als = true;
-		}
-	}
-
-	if (enable_als || disable_als) {
-		new_state = state;
-		if (enable_als) {
-			if (triggers_enabled)
-				new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS;
-			else
-				new_state.mode_bit = KBD_MODE_BIT_ALS;
-		} else {
-			if (triggers_enabled) {
-				new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
-				kbd_set_level(&new_state, kbd_previous_level);
-			} else {
-				new_state.mode_bit = KBD_MODE_BIT_ON;
-			}
-		}
-		if (!(kbd_info.modes & BIT(new_state.mode_bit)))
-			return -EINVAL;
-		ret = kbd_set_state_safe(&new_state, &state);
-		if (ret)
-			return ret;
-		kbd_previous_mode_bit = new_state.mode_bit;
-		return count;
-	}
-
-	if (kbd_triggers_supported) {
-		for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
-			if (!(kbd_info.triggers & BIT(i)))
-				continue;
-			if (!kbd_led_triggers[i])
-				continue;
-			if (strcmp(trigger+1, kbd_led_triggers[i]) != 0)
-				continue;
-			if (trigger[0] == '+' &&
-			    triggers_enabled && (state.triggers & BIT(i)))
-				return count;
-			if (trigger[0] == '-' &&
-			    (!triggers_enabled || !(state.triggers & BIT(i))))
-				return count;
-			trigger_bit = i;
-			break;
-		}
-	}
-
-	if (trigger_bit != -1) {
-		new_state = state;
-		if (trigger[0] == '+')
-			new_state.triggers |= BIT(trigger_bit);
-		else {
-			new_state.triggers &= ~BIT(trigger_bit);
-			/* NOTE: trackstick bit (2) must be disabled when
-			 *       disabling touchpad bit (1), otherwise touchpad
-			 *       bit (1) will not be disabled */
-			if (trigger_bit == 1)
-				new_state.triggers &= ~BIT(2);
-		}
-		if ((kbd_info.triggers & new_state.triggers) !=
-		    new_state.triggers)
-			return -EINVAL;
-		if (new_state.triggers && !triggers_enabled) {
-			if (als_enabled)
-				new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS;
-			else {
-				new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
-				kbd_set_level(&new_state, kbd_previous_level);
-			}
-		} else if (new_state.triggers == 0) {
-			if (als_enabled)
-				new_state.mode_bit = KBD_MODE_BIT_ALS;
-			else
-				kbd_set_level(&new_state, 0);
-		}
-		if (!(kbd_info.modes & BIT(new_state.mode_bit)))
-			return -EINVAL;
-		ret = kbd_set_state_safe(&new_state, &state);
-		if (ret)
-			return ret;
-		if (new_state.mode_bit != KBD_MODE_BIT_OFF)
-			kbd_previous_mode_bit = new_state.mode_bit;
-		return count;
-	}
-
-	return -EINVAL;
-}
-
-static ssize_t kbd_led_triggers_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct kbd_state state;
-	bool triggers_enabled;
-	int level, i, ret;
-	int len = 0;
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	len = 0;
-
-	if (kbd_triggers_supported) {
-		triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
-		level = kbd_get_level(&state);
-		for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
-			if (!(kbd_info.triggers & BIT(i)))
-				continue;
-			if (!kbd_led_triggers[i])
-				continue;
-			if ((triggers_enabled || level <= 0) &&
-			    (state.triggers & BIT(i)))
-				buf[len++] = '+';
-			else
-				buf[len++] = '-';
-			len += sprintf(buf+len, "%s ", kbd_led_triggers[i]);
-		}
-	}
-
-	if (kbd_als_supported) {
-		if (kbd_is_als_mode_bit(state.mode_bit))
-			len += sprintf(buf+len, "+als ");
-		else
-			len += sprintf(buf+len, "-als ");
-	}
-
-	if (len)
-		buf[len - 1] = '\n';
-
-	return len;
-}
-
-static DEVICE_ATTR(start_triggers, S_IRUGO | S_IWUSR,
-		   kbd_led_triggers_show, kbd_led_triggers_store);
-
-static ssize_t kbd_led_als_store(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct kbd_state state;
-	struct kbd_state new_state;
-	u8 setting;
-	int ret;
-
-	ret = kstrtou8(buf, 10, &setting);
-	if (ret)
-		return ret;
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	new_state = state;
-	new_state.als_setting = setting;
-
-	ret = kbd_set_state_safe(&new_state, &state);
-	if (ret)
-		return ret;
-
-	return count;
-}
-
-static ssize_t kbd_led_als_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct kbd_state state;
-	int ret;
-
-	ret = kbd_get_state(&state);
-	if (ret)
-		return ret;
-
-	return sprintf(buf, "%d\n", state.als_setting);
-}
-
-static DEVICE_ATTR(als_setting, S_IRUGO | S_IWUSR,
-		   kbd_led_als_show, kbd_led_als_store);
-
-static struct attribute *kbd_led_attrs[] = {
-	&dev_attr_stop_timeout.attr,
-	&dev_attr_start_triggers.attr,
-	&dev_attr_als_setting.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(kbd_led);
-
-static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
-{
-	int ret;
-	u16 num;
-	struct kbd_state state;
-
-	if (kbd_get_max_level()) {
-		ret = kbd_get_state(&state);
-		if (ret)
-			return 0;
-		ret = kbd_get_level(&state);
-		if (ret < 0)
-			return 0;
-		return ret;
-	}
-
-	if (kbd_get_valid_token_counts()) {
-		ret = kbd_get_first_active_token_bit();
-		if (ret < 0)
-			return 0;
-		for (num = kbd_token_bits; num != 0 && ret > 0; --ret)
-			num &= num - 1; /* clear the first bit set */
-		if (num == 0)
-			return 0;
-		return ffs(num) - 1;
-	}
-
-	pr_warn("Keyboard brightness level control not supported\n");
-	return 0;
-}
-
-static void kbd_led_level_set(struct led_classdev *led_cdev,
-			      enum led_brightness value)
-{
-	struct kbd_state state;
-	struct kbd_state new_state;
-	u16 num;
-
-	if (kbd_get_max_level()) {
-		if (kbd_get_state(&state))
-			return;
-		new_state = state;
-		if (kbd_set_level(&new_state, value))
-			return;
-		kbd_set_state_safe(&new_state, &state);
-		return;
-	}
-
-	if (kbd_get_valid_token_counts()) {
-		for (num = kbd_token_bits; num != 0 && value > 0; --value)
-			num &= num - 1; /* clear the first bit set */
-		if (num == 0)
-			return;
-		kbd_set_token_bit(ffs(num) - 1);
-		return;
-	}
-
-	pr_warn("Keyboard brightness level control not supported\n");
-}
-
-static struct led_classdev kbd_led = {
-	.name           = "dell::kbd_backlight",
-	.brightness_set = kbd_led_level_set,
-	.brightness_get = kbd_led_level_get,
-	.groups         = kbd_led_groups,
-};
-
-static int __init kbd_led_init(struct device *dev)
-{
-	kbd_init();
-	if (!kbd_led_present)
-		return -ENODEV;
-	kbd_led.max_brightness = kbd_get_max_level();
-	if (!kbd_led.max_brightness) {
-		kbd_led.max_brightness = kbd_get_valid_token_counts();
-		if (kbd_led.max_brightness)
-			kbd_led.max_brightness--;
-	}
-	return led_classdev_register(dev, &kbd_led);
-}
-
-static void brightness_set_exit(struct led_classdev *led_cdev,
-				enum led_brightness value)
-{
-	/* Don't change backlight level on exit */
-};
-
-static void kbd_led_exit(void)
-{
-	if (!kbd_led_present)
-		return;
-	kbd_led.brightness_set = brightness_set_exit;
-	led_classdev_unregister(&kbd_led);
-}
-
 static int __init dell_init(void)
 {
 	int max_intensity = 0;
@@ -1879,8 +841,6 @@ static int __init dell_init(void)
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_init(&platform_device->dev);
 
-	kbd_led_init(&platform_device->dev);
-
 	dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
 	if (dell_laptop_dir != NULL)
 		debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
@@ -1948,7 +908,6 @@ static void __exit dell_exit(void)
 	debugfs_remove_recursive(dell_laptop_dir);
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_exit();
-	kbd_led_exit();
 	i8042_remove_filter(dell_laptop_i8042_filter);
 	cancel_delayed_work_sync(&dell_rfkill_work);
 	backlight_device_unregister(dell_backlight_device);
@@ -1965,7 +924,5 @@ module_init(dell_init);
 module_exit(dell_exit);
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
-MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
 MODULE_DESCRIPTION("Dell laptop driver");
 MODULE_LICENSE("GPL");