summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
diff options
context:
space:
mode:
authorChen-Yu Tsai <wens@csie.org>2016-11-11 17:50:35 +0800
committerLinus Walleij <linus.walleij@linaro.org>2016-11-15 10:20:27 +0100
commitc5fda170e87a4bdaeb278f7e50f7a1f654e94eb5 (patch)
tree3f3ca82c5f2a42587fc0e1ea31c5bc762bec9560 /drivers/pinctrl
parent223dba00b4072efc590c7d648f230db1b44186b9 (diff)
downloadop-kernel-dev-c5fda170e87a4bdaeb278f7e50f7a1f654e94eb5.zip
op-kernel-dev-c5fda170e87a4bdaeb278f7e50f7a1f654e94eb5.tar.gz
pinctrl: sunxi: Add support for fetching pinconf settings from hardware
The sunxi pinctrl driver only caches whatever pinconf setting was last set on a given pingroup. This is not particularly helpful, nor is it correct. Fix this by actually reading the hardware registers and returning the correct results or error codes. Also filter out unsupported pinconf settings. Since this driver has a peculiar setup of 1 pin per group, we can support both pin and pingroup pinconf setting read back with the same code. The sunxi_pconf_reg helper and code structure is inspired by pinctrl-msm. With this done we can also claim to support generic pinconf, by setting .is_generic = true in pinconf_ops. Also remove the cached config value. The behavior of this was never correct, as it only cached 1 setting instead of all of them. Since we can now read back settings directly from the hardware, it is no longer required. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/sunxi/pinctrl-sunxi.c86
-rw-r--r--drivers/pinctrl/sunxi/pinctrl-sunxi.h1
2 files changed, 81 insertions, 6 deletions
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index e04edda..ed71bff 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -438,15 +438,91 @@ static const struct pinctrl_ops sunxi_pctrl_ops = {
.get_group_pins = sunxi_pctrl_get_group_pins,
};
+static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param,
+ u32 *offset, u32 *shift, u32 *mask)
+{
+ switch (param) {
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ *offset = sunxi_dlevel_reg(pin);
+ *shift = sunxi_dlevel_offset(pin);
+ *mask = DLEVEL_PINS_MASK;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ case PIN_CONFIG_BIAS_DISABLE:
+ *offset = sunxi_pull_reg(pin);
+ *shift = sunxi_pull_offset(pin);
+ *mask = PULL_PINS_MASK;
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ u32 offset, shift, mask, val;
+ u16 arg;
+ int ret;
+
+ pin -= pctl->desc->pin_base;
+
+ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask);
+ if (ret < 0)
+ return ret;
+
+ val = (readl(pctl->membase + offset) >> shift) & mask;
+
+ switch (pinconf_to_config_param(*config)) {
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = (val + 1) * 10;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ if (val != SUN4I_PINCTRL_PULL_UP)
+ return -EINVAL;
+ arg = 1; /* hardware is weak pull-up */
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (val != SUN4I_PINCTRL_PULL_DOWN)
+ return -EINVAL;
+ arg = 1; /* hardware is weak pull-down */
+ break;
+
+ case PIN_CONFIG_BIAS_DISABLE:
+ if (val != SUN4I_PINCTRL_NO_PULL)
+ return -EINVAL;
+ arg = 0;
+ break;
+
+ default:
+ /* sunxi_pconf_reg should catch anything unsupported */
+ WARN_ON(1);
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+
+ return 0;
+}
+
static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev,
unsigned group,
unsigned long *config)
{
struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct sunxi_pinctrl_group *g = &pctl->groups[group];
- *config = pctl->groups[group].config;
-
- return 0;
+ /* We only support 1 pin per group. Chain it to the pin callback */
+ return sunxi_pconf_get(pctldev, g->pin, config);
}
static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
@@ -508,8 +584,6 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
default:
break;
}
- /* cache the config value */
- g->config = configs[i];
} /* for each config */
spin_unlock_irqrestore(&pctl->lock, flags);
@@ -518,6 +592,8 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
}
static const struct pinconf_ops sunxi_pconf_ops = {
+ .is_generic = true,
+ .pin_config_get = sunxi_pconf_get,
.pin_config_group_get = sunxi_pconf_group_get,
.pin_config_group_set = sunxi_pconf_group_set,
};
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 0afce1a..a7efb31 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -109,7 +109,6 @@ struct sunxi_pinctrl_function {
struct sunxi_pinctrl_group {
const char *name;
- unsigned long config;
unsigned pin;
};
OpenPOWER on IntegriCloud