Merge tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "Bulk pin control changes for the v4.10 kernel cycle:

  No core changes this time. Mainly gradual improvement and
  feature growth in the drivers.

  New drivers:

   - New driver for TI DA850/OMAP-L138/AM18XX pinconf

   - The SX150x was moved over from the GPIO subsystem and reimagined as
     a pin control driver with GPIO support in a joint effort by three
     independent users of this hardware. The result was amazingly good!

   - New subdriver for the Oxnas OX820

  Improvements:

   - The sunxi driver now supports the generic pin control bindings
     rather than the sunxi-specific. Add debouncing support to the
     driver.

   - Simplifications in pinctrl-single adding a generic parser.

   - Two downstream fixes and move the Raspberry Pi BCM2835 over to use
     the generic GPIOLIB_IRQCHIP"

* tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits)
  pinctrl: sx150x: use new nested IRQ infrastructure
  pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505
  pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'
  pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]
  pinctrl: mt8173: set GPIO16 to usb iddig mode
  pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP
  pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
  pinctrl: intel: set default handler to be handle_bad_irq()
  pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507
  pinctrl: sx150x: sort chips by part number
  pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
  pinctrl: imx: fix imx_pinctrl_desc initialization
  pinctrl: sx150x: support setting multiple pins at once
  pinctrl: sx150x: various spelling fixes and some white-space cleanup
  pinctrl: mediatek: use builtin_platform_driver
  pinctrl: stm32: use builtin_platform_driver
  pinctrl: sunxi: Testing the wrong variable
  pinctrl: nomadik: split up and comments MC0 pins
  ...

1 files changed, 21 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 9f09041..569bc28 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -56,6 +56,9 @@ static int gpio_banks;
 #define DRIVE_STRENGTH_SHIFT	5
 #define DRIVE_STRENGTH_MASK		0x3
 #define DRIVE_STRENGTH   (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
+#define OUTPUT		(1 << 7)
+#define OUTPUT_VAL_SHIFT	8
+#define OUTPUT_VAL	(0x1 << OUTPUT_VAL_SHIFT)
 #define DEBOUNCE	(1 << 16)
 #define DEBOUNCE_VAL_SHIFT	17
 #define DEBOUNCE_VAL	(0x3fff << DEBOUNCE_VAL_SHIFT)
@@ -375,6 +378,19 @@ static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
 	writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
 }
 
+static bool at91_mux_get_output(void __iomem *pio, unsigned int pin, bool *val)
+{
+	*val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1;
+	return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_output(void __iomem *pio, unsigned int mask,
+				bool is_on, bool val)
+{
+	writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
+	writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR));
+}
+
 static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin)
 {
 	return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
@@ -848,6 +864,7 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
 	void __iomem *pio;
 	unsigned pin;
 	int div;
+	bool out;
 
 	*config = 0;
 	dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id);
@@ -875,6 +892,8 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
 	if (info->ops->get_drivestrength)
 		*config |= (info->ops->get_drivestrength(pio, pin)
 				<< DRIVE_STRENGTH_SHIFT);
+	if (at91_mux_get_output(pio, pin, &out))
+		*config |= OUTPUT | (out << OUTPUT_VAL_SHIFT);
 
 	return 0;
 }
@@ -907,6 +926,8 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
 		if (config & PULL_UP && config & PULL_DOWN)
 			return -EINVAL;
 
+		at91_mux_set_output(pio, mask, config & OUTPUT,
+				    (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
 		at91_mux_set_pullup(pio, mask, config & PULL_UP);
 		at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
 		if (info->ops->set_deglitch)