summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-at91-pio4.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 12:50:56 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 12:50:56 -0700
commita37571a29eca963562ff5a9233db4a5c73c72cf9 (patch)
treeec78d4b5b905f32bc541b2faa5b89f88967cf990 /drivers/pinctrl/pinctrl-at91-pio4.c
parenta0d3c7c5c07cfbe00ab89438ddf82482f5a99422 (diff)
parent0d5358330c20d50e52e3e65ff07a5db8007041fc (diff)
downloadop-kernel-dev-a37571a29eca963562ff5a9233db4a5c73c72cf9.zip
op-kernel-dev-a37571a29eca963562ff5a9233db4a5c73c72cf9.tar.gz
Merge tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
Diffstat (limited to 'drivers/pinctrl/pinctrl-at91-pio4.c')
-rw-r--r--drivers/pinctrl/pinctrl-at91-pio4.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 2c447130..a025b40 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -579,7 +579,7 @@ static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
}
if (ret < 0) {
- pinctrl_utils_dt_free_map(pctldev, *map, *num_maps);
+ pinctrl_utils_free_map(pctldev, *map, *num_maps);
dev_err(pctldev->dev, "can't create maps for node %s\n",
np_config->full_name);
}
@@ -592,7 +592,7 @@ static const struct pinctrl_ops atmel_pctlops = {
.get_group_name = atmel_pctl_get_group_name,
.get_group_pins = atmel_pctl_get_group_pins,
.dt_node_to_map = atmel_pctl_dt_node_to_map,
- .dt_free_map = pinctrl_utils_dt_free_map,
+ .dt_free_map = pinctrl_utils_free_map,
};
static int atmel_pmx_get_functions_count(struct pinctrl_dev *pctldev)
@@ -1036,18 +1036,19 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
goto clk_prepare_enable_error;
}
- atmel_pioctrl->pinctrl_dev = pinctrl_register(&atmel_pinctrl_desc,
- &pdev->dev,
- atmel_pioctrl);
- if (!atmel_pioctrl->pinctrl_dev) {
+ atmel_pioctrl->pinctrl_dev = devm_pinctrl_register(&pdev->dev,
+ &atmel_pinctrl_desc,
+ atmel_pioctrl);
+ if (IS_ERR(atmel_pioctrl->pinctrl_dev)) {
+ ret = PTR_ERR(atmel_pioctrl->pinctrl_dev);
dev_err(dev, "pinctrl registration failed\n");
- goto pinctrl_register_error;
+ goto clk_unprep;
}
ret = gpiochip_add_data(atmel_pioctrl->gpio_chip, atmel_pioctrl);
if (ret) {
dev_err(dev, "failed to add gpiochip\n");
- goto gpiochip_add_error;
+ goto clk_unprep;
}
ret = gpiochip_add_pin_range(atmel_pioctrl->gpio_chip, dev_name(dev),
@@ -1061,15 +1062,15 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
return 0;
-clk_prepare_enable_error:
- irq_domain_remove(atmel_pioctrl->irq_domain);
-pinctrl_register_error:
- clk_disable_unprepare(atmel_pioctrl->clk);
-gpiochip_add_error:
- pinctrl_unregister(atmel_pioctrl->pinctrl_dev);
gpiochip_add_pin_range_error:
gpiochip_remove(atmel_pioctrl->gpio_chip);
+clk_unprep:
+ clk_disable_unprepare(atmel_pioctrl->clk);
+
+clk_prepare_enable_error:
+ irq_domain_remove(atmel_pioctrl->irq_domain);
+
return ret;
}
@@ -1079,7 +1080,6 @@ int atmel_pinctrl_remove(struct platform_device *pdev)
irq_domain_remove(atmel_pioctrl->irq_domain);
clk_disable_unprepare(atmel_pioctrl->clk);
- pinctrl_unregister(atmel_pioctrl->pinctrl_dev);
gpiochip_remove(atmel_pioctrl->gpio_chip);
return 0;
OpenPOWER on IntegriCloud