Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...

1 files changed, 0 insertions, 21 deletions

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
index c748407..8392083 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
@@ -355,25 +355,6 @@ static const struct pinctrl_pin_desc nmk_db8500_pins[] = {
 	PINCTRL_PIN(DB8500_PIN_AC27, "GPIO267_AC27"),
 };
 
-#define DB8500_GPIO_RANGE(a, b, c) { .name = "DB8500", .id = a, .base = b, \
-			.pin_base = b, .npins = c }
-
-/*
- * This matches the 32-pin gpio chips registered by the GPIO portion. This
- * cannot be const since we assign the struct gpio_chip * pointer at runtime.
- */
-static struct pinctrl_gpio_range nmk_db8500_ranges[] = {
-	DB8500_GPIO_RANGE(0, 0, 32),
-	DB8500_GPIO_RANGE(1, 32, 5),
-	DB8500_GPIO_RANGE(2, 64, 32),
-	DB8500_GPIO_RANGE(3, 96, 2),
-	DB8500_GPIO_RANGE(4, 128, 32),
-	DB8500_GPIO_RANGE(5, 160, 12),
-	DB8500_GPIO_RANGE(6, 192, 32),
-	DB8500_GPIO_RANGE(7, 224, 7),
-	DB8500_GPIO_RANGE(8, 256, 12),
-};
-
 /*
  * Read the pin group names like this:
  * u0_a_1    = first groups of pins for uart0 on alt function a
@@ -1238,8 +1219,6 @@ static const u16 db8500_prcm_gpiocr_regs[] = {
 };
 
 static const struct nmk_pinctrl_soc_data nmk_db8500_soc = {
-	.gpio_ranges = nmk_db8500_ranges,
-	.gpio_num_ranges = ARRAY_SIZE(nmk_db8500_ranges),
 	.pins = nmk_db8500_pins,
 	.npins = ARRAY_SIZE(nmk_db8500_pins),
 	.functions = nmk_db8500_functions,