summaryrefslogtreecommitdiffstats
path: root/drivers/phy
diff options
context:
space:
mode:
authorRoman Byshko <rbyshko@gmail.com>2014-11-10 19:55:06 +0100
committerKishon Vijay Abraham I <kishon@ti.com>2014-11-13 11:49:23 +0530
commit6827a46f59942208d45e0c40e53f649bfc7792ed (patch)
treef72520e86dd95f58b607d8e07606e72423f33c02 /drivers/phy
parent491e049064a4ea69ba4b35bdf614f12bc762a717 (diff)
downloadop-kernel-dev-6827a46f59942208d45e0c40e53f649bfc7792ed.zip
op-kernel-dev-6827a46f59942208d45e0c40e53f649bfc7792ed.tar.gz
phy: sun4i: add support for USB phy0
The driver for sun4i USB phys currently supports only phy1 and phy2 which are used for USB host controllers. This patch adds support for USB phy0, which is used by the musb hdrc USB controller. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/phy-sun4i-usb.c9
1 files changed, 6 insertions, 3 deletions
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 0baf5ef..6bd2b0c 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -157,6 +157,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ /* Enable USB 45 Ohm resistor calibration */
+ if (phy->index == 0)
+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+
/* Adjust PHY's magnitude and rate */
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
@@ -213,7 +217,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys))
+ if (args->args[0] >= data->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -255,8 +259,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- /* Skip 0, 0 is the phy for otg which is not yet supported. */
- for (i = 1; i < data->num_phys; i++) {
+ for (i = 0; i < data->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
OpenPOWER on IntegriCloud