summaryrefslogtreecommitdiffstats
path: root/drivers/phy
diff options
context:
space:
mode:
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>2016-05-31 21:47:17 +0900
committerKishon Vijay Abraham I <kishon@ti.com>2016-06-17 18:25:48 +0530
commit6762925df4642aec5629f7971ba477d6930f53f7 (patch)
tree6fa5ac63e1fe8515a03fa1731792d8ec03de555c /drivers/phy
parent31b2a32f708bb33b3f35b03ce3d2cb31f7d1e684 (diff)
downloadop-kernel-dev-6762925df4642aec5629f7971ba477d6930f53f7.zip
op-kernel-dev-6762925df4642aec5629f7971ba477d6930f53f7.tar.gz
phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS change
This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: <stable@vger.kernel.org> # v4.5+ Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/phy-rcar-gen3-usb2.c14
1 files changed, 1 insertions, 13 deletions
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 76bb88f..4be3f5d 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -144,12 +144,6 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
}
-static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
-{
- return !!(readl(ch->base + USB2_ADPCTRL) &
- USB2_ADPCTRL_OTGSESSVLD);
-}
-
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
@@ -157,13 +151,7 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
{
- bool is_host = true;
-
- /* B-device? */
- if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch))
- is_host = false;
-
- if (is_host)
+ if (!rcar_gen3_check_id(ch))
rcar_gen3_init_for_host(ch);
else
rcar_gen3_init_for_peri(ch);
OpenPOWER on IntegriCloud