diff options
| author | Manuel Lauss <manuel.lauss@googlemail.com> | 2010-04-21 17:41:59 +0200 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2010-04-30 20:52:43 +0100 |
| commit | 0000a5390184af1459e82506fcfa7db96f3e6d33 (patch) | |
| tree | a21be05f506bbee603e2a280d126204ce7dbf3d4 /drivers/pcmcia | |
| parent | 0dfeecacd8e4405209f217944818b90016bb4a9d (diff) | |
| download | op-kernel-dev-0000a5390184af1459e82506fcfa7db96f3e6d33.zip op-kernel-dev-0000a5390184af1459e82506fcfa7db96f3e6d33.tar.gz | |
MIPS: DB1200: PCMCIA card detection must not be auto-enabled.
Same issues as SD card detection: One of both is always triggering and the
handlers take care to shut it up and enable the other. To avoid messages
about "unbalanced interrupt enable/disable" they must not be automatically
enabled when initally requested.
This was not an issue with the db1200_defconfig due to fortunate timings;
on a build without network chip support the warnings appear.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1133/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/db1xxx_ss.c | 16 |
1 files changed, 4 insertions, 12 deletions
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 2d48196..0f4cc3f 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) { int ret; - unsigned long flags; if (sock->stschg_irq != -1) { ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, @@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * active one disabled. */ if (sock->board_type == BOARD_TYPE_DB1200) { - local_irq_save(flags); - ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); - if (ret) { - local_irq_restore(flags); + if (ret) goto out1; - } ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_eject", sock); if (ret) { free_irq(sock->insert_irq, sock); - local_irq_restore(flags); goto out1; } - /* disable the currently active one */ + /* enable the currently silent one */ if (db1200_card_inserted(sock)) - disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); else - disable_irq_nosync(sock->eject_irq); - - local_irq_restore(flags); + enable_irq(sock->insert_irq); } else { /* all other (older) Db1x00 boards use a GPIO to show * card detection status: use both-edge triggers. |
