pcmcia: Convert dev_printk to dev_<level>

Reduce object size a little by using dev_<level>
calls instead of dev_printk(KERN_<LEVEL>.

Other miscellanea:

o Coalesce formats
o Realign arguments
o Use pr_cont instead of naked printk
  reorder test to use "%s\n"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 28 insertions, 33 deletions

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 965bd84..56c8343 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -712,10 +712,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 		pcibios_bus_to_resource(dev->bus, res, &region);
 		if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
 			return 0;
-		dev_printk(KERN_INFO, &dev->dev,
-			   "Preassigned resource %d busy or not available, "
-			   "reconfiguring...\n",
-			   nr);
+		dev_info(&dev->dev,
+			 "Preassigned resource %d busy or not available, reconfiguring...\n",
+			 nr);
 	}
 
 	if (type & IORESOURCE_IO) {
@@ -738,9 +737,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 			return 1;
 	}
 
-	dev_printk(KERN_INFO, &dev->dev,
-		   "no resource of type %x available, trying to continue...\n",
-		   type);
+	dev_info(&dev->dev,
+		 "no resource of type %x available, trying to continue...\n",
+		 type);
 	res->start = res->end = res->flags = 0;
 	return 0;
 }
@@ -979,8 +978,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 	socket->probe_status = 0;
 
 	if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
-		dev_printk(KERN_WARNING, &socket->dev->dev,
-			   "request_irq() in yenta_probe_cb_irq() failed!\n");
+		dev_warn(&socket->dev->dev,
+			 "request_irq() in yenta_probe_cb_irq() failed!\n");
 		return -1;
 	}
 
@@ -1019,9 +1018,8 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
 	else
 		socket->socket.irq_mask = 0;
 
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
-		   socket->socket.irq_mask, socket->cb_irq);
+	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
+		 socket->socket.irq_mask, socket->cb_irq);
 }
 
 /*
@@ -1111,9 +1109,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 
 	/* Show that the wanted subordinate number is not possible: */
 	if (cardbus_bridge->busn_res.end > upper_limit)
-		dev_printk(KERN_WARNING, &cardbus_bridge->dev,
-			   "Upper limit for fixing this "
-			   "bridge's parent bridge: #%02x\n", upper_limit);
+		dev_warn(&cardbus_bridge->dev,
+			 "Upper limit for fixing this bridge's parent bridge: #%02x\n",
+			 upper_limit);
 
 	/* If we have room to increase the bridge's subordinate number, */
 	if (bridge_to_fix->busn_res.end < upper_limit) {
@@ -1122,11 +1120,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 		unsigned char subordinate_to_assign =
 			min_t(int, cardbus_bridge->busn_res.end, upper_limit);
 
-		dev_printk(KERN_INFO, &bridge_to_fix->dev,
-			   "Raising subordinate bus# of parent "
-			   "bus (#%02x) from #%02x to #%02x\n",
-			   bridge_to_fix->number,
-			   (int)bridge_to_fix->busn_res.end, subordinate_to_assign);
+		dev_info(&bridge_to_fix->dev,
+			 "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n",
+			 bridge_to_fix->number,
+			 (int)bridge_to_fix->busn_res.end,
+			 subordinate_to_assign);
 
 		/* Save the new subordinate in the bus struct of the bridge */
 		bridge_to_fix->busn_res.end = subordinate_to_assign;
@@ -1153,8 +1151,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	 * Bail out if so.
 	 */
 	if (!dev->subordinate) {
-		dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
-			   "(try 'pci=assign-busses')\n");
+		dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n");
 		return -ENODEV;
 	}
 
@@ -1189,7 +1186,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto disable;
 
 	if (!pci_resource_start(dev, 0)) {
-		dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
+		dev_err(&dev->dev, "No cardbus resource!\n");
 		ret = -ENODEV;
 		goto release;
 	}
@@ -1208,8 +1205,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	 * report the subsystem vendor and device for help debugging
 	 * the irq stuff...
 	 */
-	dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
-		   dev->subsystem_vendor, dev->subsystem_device);
+	dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n",
+		 dev->subsystem_vendor, dev->subsystem_device);
 
 	yenta_config_init(socket);
 
@@ -1239,12 +1236,10 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		setup_timer(&socket->poll_timer, yenta_interrupt_wrapper,
 			    (unsigned long)socket);
 		mod_timer(&socket->poll_timer, jiffies + HZ);
-		dev_printk(KERN_INFO, &dev->dev,
-			   "no PCI IRQ, CardBus support disabled for this "
-			   "socket.\n");
-		dev_printk(KERN_INFO, &dev->dev,
-			   "check your BIOS CardBus, BIOS IRQ or ACPI "
-			   "settings.\n");
+		dev_info(&dev->dev,
+			 "no PCI IRQ, CardBus support disabled for this socket.\n");
+		dev_info(&dev->dev,
+			 "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
 	} else {
 		socket->socket.features |= SS_CAP_CARDBUS;
 	}
@@ -1252,8 +1247,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Figure out what the dang thing can do for the PCMCIA layer... */
 	yenta_interrogate(socket);
 	yenta_get_socket_capabilities(socket, isa_interrupts);
-	dev_printk(KERN_INFO, &dev->dev,
-		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+	dev_info(&dev->dev, "Socket status: %08x\n",
+		 cb_readl(socket, CB_SOCKET_STATE));
 
 	yenta_fixup_parent_bridge(dev->subordinate);