diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pcmcia/pxa2xx_sharpsl.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/pcmcia/pxa2xx_sharpsl.c')
-rw-r--r-- | drivers/pcmcia/pxa2xx_sharpsl.c | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c new file mode 100644 index 0000000..42efe21 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -0,0 +1,264 @@ +/* + * Sharp SL-C7xx Series PCMCIA routines + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches and pxa2xx_mainstone.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/hardware/scoop.h> +#include <asm/arch/corgi.h> +#include <asm/arch/pxa-regs.h> + +#include "soc_common.h" + +#define NO_KEEP_VS 0x0001 + +static unsigned char keep_vs; +static unsigned char keep_rd; + +static struct pcmcia_irqs irqs[] = { + { 0, CORGI_IRQ_GPIO_CF_CD, "PCMCIA0 CD"}, +}; + +static void sharpsl_pcmcia_init_reset(void) +{ + reset_scoop(&corgiscoop_device.dev); + keep_vs = NO_KEEP_VS; + keep_rd = 0; +} + +static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + /* + * Setup default state of GPIO outputs + * before we enable them as outputs. + */ + GPSR(GPIO48_nPOE) = + GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | + GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | + GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + + /* Register interrupts */ + ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); + + if (ret) { + printk(KERN_ERR "Request for Compact Flash IRQ failed\n"); + return ret; + } + + /* Enable interrupt */ + write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, 0x00C0); + write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, 0x0101); + keep_vs = NO_KEEP_VS; + + skt->irq = CORGI_IRQ_GPIO_CF_IRQ; + + return 0; +} + +static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); + + /* CF_BUS_OFF */ + sharpsl_pcmcia_init_reset(); +} + + +static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + unsigned short cpr, csr; + + cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR); + + write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x00FF); + write_scoop_reg(&corgiscoop_device.dev, SCOOP_ISR, 0x0000); + write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x0000); + csr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CSR); + if (csr & 0x0004) { + /* card eject */ + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); + keep_vs = NO_KEEP_VS; + } + else if (!(keep_vs & NO_KEEP_VS)) { + /* keep vs1,vs2 */ + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); + csr |= keep_vs; + } + else if (cpr & 0x0003) { + /* power on */ + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); + keep_vs = (csr & 0x00C0); + } + else { + /* card detect */ + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0002); + } + + state->detect = (csr & 0x0004) ? 0 : 1; + state->ready = (csr & 0x0002) ? 1 : 0; + state->bvd1 = (csr & 0x0010) ? 1 : 0; + state->bvd2 = (csr & 0x0020) ? 1 : 0; + state->wrprot = (csr & 0x0008) ? 1 : 0; + state->vs_3v = (csr & 0x0040) ? 0 : 1; + state->vs_Xv = (csr & 0x0080) ? 0 : 1; + + if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) { + printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr); + } + +} + + +static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + unsigned long flags; + + unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr; + + switch (state->Vcc) { + case 0: break; + case 33: break; + case 50: break; + default: + printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc); + return -1; + } + + if ((state->Vpp!=state->Vcc) && (state->Vpp!=0)) { + printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp); + return -1; + } + + local_irq_save(flags); + + nmcr = (mcr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR)) & ~0x0010; + ncpr = (cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR)) & ~0x0083; + nccr = (ccr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR)) & ~0x0080; + nimr = (imr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR)) & ~0x003E; + + ncpr |= (state->Vcc == 33) ? 0x0001 : + (state->Vcc == 50) ? 0x0002 : 0; + nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0; + ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0; + nccr |= (state->flags&SS_RESET)? 0x0080: 0; + nimr |= ((skt->status&SS_DETECT) ? 0x0004 : 0)| + ((skt->status&SS_READY) ? 0x0002 : 0)| + ((skt->status&SS_BATDEAD)? 0x0010 : 0)| + ((skt->status&SS_BATWARN)? 0x0020 : 0)| + ((skt->status&SS_STSCHG) ? 0x0010 : 0)| + ((skt->status&SS_WRPROT) ? 0x0008 : 0); + + if (!(ncpr & 0x0003)) { + keep_rd = 0; + } else if (!keep_rd) { + if (nccr & 0x0080) + keep_rd = 1; + else + nccr |= 0x0080; + } + + if (mcr != nmcr) + write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, nmcr); + if (cpr != ncpr) + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR, ncpr); + if (ccr != nccr) + write_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR, nccr); + if (imr != nimr) + write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, nimr); + + local_irq_restore(flags); + + return 0; +} + +static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ +} + +static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level sharpsl_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = sharpsl_pcmcia_hw_init, + .hw_shutdown = sharpsl_pcmcia_hw_shutdown, + .socket_state = sharpsl_pcmcia_socket_state, + .configure_socket = sharpsl_pcmcia_configure_socket, + .socket_init = sharpsl_pcmcia_socket_init, + .socket_suspend = sharpsl_pcmcia_socket_suspend, + .first = 0, + .nr = 1, +}; + +static struct platform_device *sharpsl_pcmcia_device; + +static int __init sharpsl_pcmcia_init(void) +{ + int ret; + + sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL); + if (!sharpsl_pcmcia_device) + return -ENOMEM; + memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device)); + sharpsl_pcmcia_device->name = "pxa2xx-pcmcia"; + sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops; + + ret = platform_device_register(sharpsl_pcmcia_device); + if (ret) + kfree(sharpsl_pcmcia_device); + + return ret; +} + +static void __exit sharpsl_pcmcia_exit(void) +{ + /* + * This call is supposed to free our sharpsl_pcmcia_device. + * Unfortunately platform_device don't have a free method, and + * we can't assume it's free of any reference at this point so we + * can't free it either. + */ + platform_device_unregister(sharpsl_pcmcia_device); +} + +module_init(sharpsl_pcmcia_init); +module_exit(sharpsl_pcmcia_exit); + +MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support"); +MODULE_LICENSE("GPL"); |