[PATCH] USB: move handoff code

This moves the PCI quirk handling for USB host controllers from the
PCI directory to the USB directory.  Follow-on patches will need to:

(a) merge these copies with the originals in the HCD reset methods.
they don't wholly agree, despite doing the very same thing; and

(b) eventually change it so "usb-handoff" is the default, to help
get more robust USB/BIOS/input/... interactions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/Makefile              |    2
 drivers/pci/quirks.c          |  253 ---------------------------------------
 drivers/usb/Makefile          |    1
 drivers/usb/host/Makefile     |    5
 drivers/usb/host/pci-quirks.c |  272 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 280 insertions(+), 253 deletions(-)

1 files changed, 3 insertions, 250 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee16059..bbd9c23 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -7,6 +7,9 @@
  *
  *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
  *
+ *  Init/reset quirks for USB host controllers should be in the
+ *  USB quirks file, where their drivers can access reuse it.
+ *
  *  The bridge optimization stuff has been removed. If you really
  *  have a silly BIOS which is unable to set your host bridge right,
  *  use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -645,28 +648,6 @@ static void quirk_via_irq(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
 
 /*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- *     bit13:  USB PIRQ Enable (USBPIRQDEN),
- *     bit4:   Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
-	u16 legsup;
-
-	pci_read_config_word(dev, 0xc0, &legsup);
-	legsup &= 0x50ef;
-	pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371SB_2,	quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_2,	quirk_piix3_usb );
-
-/*
  * VIA VT82C598 has its device ID settable and many BIOSes
  * set it to the ID of VT82C597 for backward compatibility.
  * We need to switch it off to be able to recognize the real
@@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
 	pci_read_config_byte(dev, 0x77, &val);
 }
 
-
-#define UHCI_USBLEGSUP		0xc0		/* legacy support */
-#define UHCI_USBCMD		0		/* command register */
-#define UHCI_USBSTS		2		/* status register */
-#define UHCI_USBINTR		4		/* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT	0x2000		/* only PIRQ enable set */
-#define UHCI_USBCMD_RUN		(1 << 0)	/* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET	(1 << 2)	/* Global reset */
-#define UHCI_USBCMD_CONFIGURE	(1 << 6)	/* config semaphore */
-#define UHCI_USBSTS_HALTED	(1 << 5)	/* HCHalted bit */
-
-#define OHCI_CONTROL		0x04
-#define OHCI_CMDSTATUS		0x08
-#define OHCI_INTRSTATUS		0x0c
-#define OHCI_INTRENABLE		0x10
-#define OHCI_INTRDISABLE	0x14
-#define OHCI_OCR		(1 << 3)	/* ownership change request */
-#define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
-#define OHCI_INTR_OC		(1 << 30)	/* ownership change */
-
-#define EHCI_HCC_PARAMS		0x08		/* extended capabilities */
-#define EHCI_USBCMD		0		/* command register */
-#define EHCI_USBCMD_RUN		(1 << 0)	/* RUN/STOP bit */
-#define EHCI_USBSTS		4		/* status register */
-#define EHCI_USBSTS_HALTED	(1 << 12)	/* HCHalted bit */
-#define EHCI_USBINTR		8		/* interrupt register */
-#define EHCI_USBLEGSUP		0		/* legacy support register */
-#define EHCI_USBLEGSUP_BIOS	(1 << 16)	/* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS	(1 << 24)	/* OS semaphore */
-#define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
-	usb_early_handoff = 1;
-	return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
-	unsigned long base = 0;
-	int wait_time, delta;
-	u16 val, sts;
-	int i;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++)
-		if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
-			base = pci_resource_start(pdev, i);
-			break;
-		}
-
-	if (!base)
-		return;
-
-	/*
-	 * stop controller
-	 */
-	sts = inw(base + UHCI_USBSTS);
-	val = inw(base + UHCI_USBCMD);
-	val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
-	outw(val, base + UHCI_USBCMD);
-
-	/*
-	 * wait while it stops if it was running
-	 */
-	if ((sts & UHCI_USBSTS_HALTED) == 0)
-	{
-		wait_time = 1000;
-		delta = 100;
-
-		do {
-			outw(0x1f, base + UHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
-			val = inw(base + UHCI_USBSTS);
-			if (val & UHCI_USBSTS_HALTED)
-				break;
-		} while (wait_time > 0);
-	}
-
-	/*
-	 * disable interrupts & legacy support
-	 */
-	outw(0, base + UHCI_USBINTR);
-	outw(0x1f, base + UHCI_USBSTS);
-	pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
-	if (val & 0xbf) 
-		pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-		
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
-	void __iomem *base;
-	int wait_time;
-
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				     pci_resource_len(pdev, 0));
-	if (base == NULL) return;
-
-	if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
-		wait_time = 500; /* 0.5 seconds */
-		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
-		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
-		while (wait_time > 0 && 
-				readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
-			wait_time -= 10;
-			msleep(10);
-		}
-	}
-
-	/*
-	 * disable interrupts
-	 */
-	writel(~(u32)0, base + OHCI_INTRDISABLE);
-	writel(~(u32)0, base + OHCI_INTRSTATUS);
-
-	iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
-	int wait_time, delta;
-	void __iomem *base, *op_reg_base;
-	u32 hcc_params, val, temp;
-	u8 cap_length;
-
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-	if (base == NULL) return;
-
-	cap_length = readb(base);
-	op_reg_base = base + cap_length;
-	hcc_params = readl(base + EHCI_HCC_PARAMS);
-	hcc_params = (hcc_params >> 8) & 0xff;
-	if (hcc_params) {
-		pci_read_config_dword(pdev, 
-					hcc_params + EHCI_USBLEGSUP,
-					&val);
-		if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
-			/*
-			 * Ok, BIOS is in smm mode, try to hand off...
-			 */
-			pci_read_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						&temp);
-			pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						temp | EHCI_USBLEGCTLSTS_SOOE);
-			val |= EHCI_USBLEGSUP_OS;
-			pci_write_config_dword(pdev, 
-						hcc_params + EHCI_USBLEGSUP, 
-						val);
-
-			wait_time = 500;
-			do {
-				msleep(10);
-				wait_time -= 10;
-				pci_read_config_dword(pdev,
-						hcc_params + EHCI_USBLEGSUP,
-						&val);
-			} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
-			if (!wait_time) {
-				/*
-				 * well, possibly buggy BIOS...
-				 */
-				printk(KERN_WARNING "EHCI early BIOS handoff "
-						"failed (BIOS bug ?)\n");
-				pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGSUP,
-						EHCI_USBLEGSUP_OS);
-				pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						0);
-			}
-		}
-	}
-
-	/*
-	 * halt EHCI & disable its interrupts in any case
-	 */
-	val = readl(op_reg_base + EHCI_USBSTS);
-	if ((val & EHCI_USBSTS_HALTED) == 0) {
-		val = readl(op_reg_base + EHCI_USBCMD);
-		val &= ~EHCI_USBCMD_RUN;
-		writel(val, op_reg_base + EHCI_USBCMD);
-
-		wait_time = 2000;
-		delta = 100;
-		do {
-			writel(0x3f, op_reg_base + EHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
-			val = readl(op_reg_base + EHCI_USBSTS);
-			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
-				break;
-			}
-		} while (wait_time > 0);
-	}
-	writel(0, op_reg_base + EHCI_USBINTR);
-	writel(0x3f, op_reg_base + EHCI_USBSTS);
-
-	iounmap(base);
-
-	return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
-	if (!usb_early_handoff)
-		return;
-
-	if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
-		quirk_usb_handoff_uhci(pdev);
-	} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
-		quirk_usb_handoff_ohci(pdev);
-	} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
-		quirk_usb_disable_ehci(pdev);
-	}
-
-	return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
 /*
  * ... This is further complicated by the fact that some SiS96x south
  * bridges pretend to be 85C503/5513 instead.  In that case see if we