summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
authorEric W. Biederman <ebiederm@xmission.com>2011-10-17 11:46:06 -0700
committerJesse Barnes <jbarnes@virtuousgeek.org>2011-12-05 10:21:50 -0800
commita776c491ca5e38c26d9f66923ff574d041e747f4 (patch)
treec9e69bb72bdf80bb5ceb2002708281c6494954c4 /drivers/pci
parenta424948dde8421089826e2f782d0efe9e565707e (diff)
downloadop-kernel-dev-a776c491ca5e38c26d9f66923ff574d041e747f4.zip
op-kernel-dev-a776c491ca5e38c26d9f66923ff574d041e747f4.tar.gz
PCI: msi: Disable msi interrupts when we initialize a pci device
I traced a nasty kexec on panic boot failure to the fact that we had screaming msi interrupts and we were not disabling the msi messages at kernel startup. The booting kernel had not enabled those interupts so was not prepared to handle them. I can see no reason why we would ever want to leave the msi interrupts enabled at boot if something else has enabled those interrupts. The pci spec specifies that msi interrupts should be off by default. Drivers are expected to enable the msi interrupts if they want to use them. Our interrupt handling code reprograms the interrupt handlers at boot and will not be be able to do anything useful with an unexpected interrupt. This patch applies cleanly all of the way back to 2.6.32 where I noticed the problem. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/msi.c10
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index e6b6b9c..337e16a 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -981,5 +981,15 @@ EXPORT_SYMBOL(pci_msi_enabled);
void pci_msi_init_pci_dev(struct pci_dev *dev)
{
+ int pos;
INIT_LIST_HEAD(&dev->msi_list);
+
+ /* Disable the msi hardware to avoid screaming interrupts
+ * during boot. This is the power on reset default so
+ * usually this should be a noop.
+ */
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ if (pos)
+ msi_set_enable(dev, pos, 0);
+ msix_set_enable(dev, 0);
}
OpenPOWER on IntegriCloud