summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2005-09-23 17:14:37 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2005-10-28 16:47:38 -0700
commit7586269c0b52970f60bb69fcb86e765fc1d72309 (patch)
treea0cb04f9527101e8b9331350e4dd9d57e6e019e7 /drivers/pci
parent38ffdd62b0f466ef9126ac9f060ade5f218b4887 (diff)
downloadop-kernel-dev-7586269c0b52970f60bb69fcb86e765fc1d72309.zip
op-kernel-dev-7586269c0b52970f60bb69fcb86e765fc1d72309.tar.gz
[PATCH] USB: move handoff code
This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/quirks.c253
1 files changed, 3 insertions, 250 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee16059..bbd9c23 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -7,6 +7,9 @@
*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
*
+ * Init/reset quirks for USB host controllers should be in the
+ * USB quirks file, where their drivers can access reuse it.
+ *
* The bridge optimization stuff has been removed. If you really
* have a silly BIOS which is unable to set your host bridge right,
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -645,28 +648,6 @@ static void quirk_via_irq(struct pci_dev *dev)
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- * bit13: USB PIRQ Enable (USBPIRQDEN),
- * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
- u16 legsup;
-
- pci_read_config_word(dev, 0xc0, &legsup);
- legsup &= 0x50ef;
- pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
-
-/*
* VIA VT82C598 has its device ID settable and many BIOSes
* set it to the ID of VT82C597 for backward compatibility.
* We need to switch it off to be able to recognize the real
@@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
pci_read_config_byte(dev, 0x77, &val);
}
-
-#define UHCI_USBLEGSUP 0xc0 /* legacy support */
-#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
-#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
-
-#define OHCI_CONTROL 0x04
-#define OHCI_CMDSTATUS 0x08
-#define OHCI_INTRSTATUS 0x0c
-#define OHCI_INTRENABLE 0x10
-#define OHCI_INTRDISABLE 0x14
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-
-#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
-#define EHCI_USBCMD 0 /* command register */
-#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define EHCI_USBSTS 4 /* status register */
-#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
-#define EHCI_USBINTR 8 /* interrupt register */
-#define EHCI_USBLEGSUP 0 /* legacy support register */
-#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
-#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
- usb_early_handoff = 1;
- return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
-
- if (!base)
- return;
-
- /*
- * stop controller
- */
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
-
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
-
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
- }
-
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
- void __iomem *base;
- int wait_time;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time = 500; /* 0.5 seconds */
- writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
- writel(OHCI_OCR, base + OHCI_CMDSTATUS);
- while (wait_time > 0 &&
- readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time -= 10;
- msleep(10);
- }
- }
-
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
- iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
- int wait_time, delta;
- void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- cap_length = readb(base);
- op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
-
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
- */
- printk(KERN_WARNING "EHCI early BIOS handoff "
- "failed (BIOS bug ?)\n");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
- }
- }
- }
-
- /*
- * halt EHCI & disable its interrupts in any case
- */
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val & EHCI_USBSTS_HALTED) == 0) {
- val = readl(op_reg_base + EHCI_USBCMD);
- val &= ~EHCI_USBCMD_RUN;
- writel(val, op_reg_base + EHCI_USBCMD);
-
- wait_time = 2000;
- delta = 100;
- do {
- writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
- break;
- }
- } while (wait_time > 0);
- }
- writel(0, op_reg_base + EHCI_USBINTR);
- writel(0x3f, op_reg_base + EHCI_USBSTS);
-
- iounmap(base);
-
- return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
- if (!usb_early_handoff)
- return;
-
- if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
- quirk_usb_handoff_uhci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
- quirk_usb_handoff_ohci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
- quirk_usb_disable_ehci(pdev);
- }
-
- return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
OpenPOWER on IntegriCloud