PCI/portdrv: Simplify PCIe feature permission checking

Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the
platform firmware or the OS, so the host bridge driver may have to request
permission from the platform before using them.  On ACPI systems, this is
done by negotiate_os_control() in acpi_pci_root_add().

The PCIe port driver later uses pcie_port_platform_notify() and
pcie_port_acpi_setup() to figure out whether it can use these features.
But all we need is a single bit for each service, so these interfaces are
needlessly complicated.

Simplify this by adding bits in the struct pci_host_bridge to show when the
OS has permission to use each feature:

  + unsigned int native_aer:1;       /* OS may use PCIe AER */
  + unsigned int native_hotplug:1;   /* OS may use PCIe hotplug */
  + unsigned int native_pme:1;       /* OS may use PCIe PME */

These are set when we create a host bridge, and the host bridge driver can
clear the bits corresponding to any feature the platform doesn't want us to
use.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

4 files changed, 36 insertions, 28 deletions

diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index e01c10c..11fb633 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -7,7 +7,6 @@
 obj-$(CONFIG_PCIEASPM)		+= aspm.o
 
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o
-pcieportdrv-$(CONFIG_ACPI)	+= portdrv_acpi.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 7bfd75f..ed84e76 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -123,15 +123,4 @@ static inline bool pcie_pme_no_msi(void) { return false; }
 static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
 #endif /* !CONFIG_PCIE_PME */
 
-#ifdef CONFIG_ACPI
-void pcie_port_acpi_setup(struct pci_dev *port, int *mask);
-
-static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask)
-{
-	pcie_port_acpi_setup(port, mask);
-}
-#else /* !CONFIG_ACPI */
-static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
-#endif /* !CONFIG_ACPI */
-
 #endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index bf851da..5c25761 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -206,19 +206,20 @@ legacy_irq:
  */
 static int get_port_device_capability(struct pci_dev *dev)
 {
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+	bool native;
 	int services = 0;
-	int cap_mask = 0;
 
-	cap_mask = PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP;
-	if (pci_aer_available())
-		cap_mask |= PCIE_PORT_SERVICE_AER | PCIE_PORT_SERVICE_DPC;
-
-	if (pcie_ports_auto)
-		pcie_port_platform_notify(dev, &cap_mask);
+	/*
+	 * If the user specified "pcie_ports=native", use the PCIe services
+	 * regardless of whether the platform has given us permission.  On
+	 * ACPI systems, this means we ignore _OSC.
+	 */
+	native = !pcie_ports_auto;
 
-	/* Hot-Plug Capable */
-	if ((cap_mask & PCIE_PORT_SERVICE_HP) && dev->is_hotplug_bridge) {
+	if (dev->is_hotplug_bridge && (native || host->native_hotplug)) {
 		services |= PCIE_PORT_SERVICE_HP;
+
 		/*
 		 * Disable hot-plug interrupts in case they have been enabled
 		 * by the BIOS and the hot-plug service driver is not loaded.
@@ -226,20 +227,27 @@ static int get_port_device_capability(struct pci_dev *dev)
 		pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
 			  PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
 	}
-	/* AER capable */
-	if ((cap_mask & PCIE_PORT_SERVICE_AER)
-	    && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) {
+
+	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR) &&
+	    pci_aer_available() && (native || host->native_aer)) {
 		services |= PCIE_PORT_SERVICE_AER;
+
 		/*
 		 * Disable AER on this port in case it's been enabled by the
 		 * BIOS (the AER service driver will enable it when necessary).
 		 */
 		pci_disable_pcie_error_reporting(dev);
 	}
-	/* Root ports are capable of generating PME too */
-	if ((cap_mask & PCIE_PORT_SERVICE_PME)
-	    && pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
+
+	/*
+	 * Root ports are capable of generating PME too.  Root Complex
+	 * Event Collectors can also generate PMEs, but we don't handle
+	 * those yet.
+	 */
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
+	    (native || host->native_pme)) {
 		services |= PCIE_PORT_SERVICE_PME;
+
 		/*
 		 * Disable PME interrupt on this port in case it's been enabled
 		 * by the BIOS (the PME service driver will enable it when
@@ -247,7 +255,9 @@ static int get_port_device_capability(struct pci_dev *dev)
 		 */
 		pcie_pme_interrupt_enable(dev, false);
 	}
-	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC))
+
+	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
+	    pci_aer_available())
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	return services;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ef53774..a00de69 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -540,6 +540,16 @@ struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
 	INIT_LIST_HEAD(&bridge->windows);
 	bridge->dev.release = pci_release_host_bridge_dev;
 
+	/*
+	 * We assume we can manage these PCIe features.  Some systems may
+	 * reserve these for use by the platform itself, e.g., an ACPI BIOS
+	 * may implement its own AER handling and use _OSC to prevent the
+	 * OS from interfering.
+	 */
+	bridge->native_aer = 1;
+	bridge->native_hotplug = 1;
+	bridge->native_pme = 1;
+
 	return bridge;
 }
 EXPORT_SYMBOL(pci_alloc_host_bridge);