[PATCH] PCI: msi abstractions and support for altix

Abstract portions of the MSI core for platforms that do not use standard
APIC interrupt controllers.  This is implemented through a new arch-specific
msi setup routine, and a set of msi ops which can be set on a per platform
basis.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 71 insertions, 62 deletions

diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 4ac52d4..56951c3 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,6 +6,68 @@
 #ifndef MSI_H
 #define MSI_H
 
+/*
+ * MSI operation vector.  Used by the msi core code (drivers/pci/msi.c)
+ * to abstract platform-specific tasks relating to MSI address generation
+ * and resource management.
+ */
+struct msi_ops {
+	/**
+	 * setup - generate an MSI bus address and data for a given vector
+	 * @pdev: PCI device context (in)
+	 * @vector: vector allocated by the msi core (in)
+	 * @addr_hi: upper 32 bits of PCI bus MSI address (out)
+	 * @addr_lo: lower 32 bits of PCI bus MSI address (out)
+	 * @data: MSI data payload (out)
+	 *
+	 * Description: The setup op is used to generate a PCI bus addres and
+	 * data which the msi core will program into the card MSI capability
+	 * registers.  The setup routine is responsible for picking an initial
+	 * cpu to target the MSI at.  The setup routine is responsible for
+	 * examining pdev to determine the MSI capabilities of the card and
+	 * generating a suitable address/data.  The setup routine is
+	 * responsible for allocating and tracking any system resources it
+	 * needs to route the MSI to the cpu it picks, and for associating
+	 * those resources with the passed in vector.
+	 *
+	 * Returns 0 if the MSI address/data was successfully setup.
+	 **/
+
+	int	(*setup)    (struct pci_dev *pdev, unsigned int vector,
+			     u32 *addr_hi, u32 *addr_lo, u32 *data);
+
+	/**
+	 * teardown - release resources allocated by setup
+	 * @vector: vector context for resources (in)
+	 *
+	 * Description:  The teardown op is used to release any resources
+	 * that were allocated in the setup routine associated with the passed
+	 * in vector.
+	 **/
+
+	void	(*teardown) (unsigned int vector);
+
+	/**
+	 * target - retarget an MSI at a different cpu
+	 * @vector: vector context for resources (in)
+	 * @cpu:  new cpu to direct vector at (in)
+	 * @addr_hi: new value of PCI bus upper 32 bits (in/out)
+	 * @addr_lo: new value of PCI bus lower 32 bits (in/out)
+	 *
+	 * Description:  The target op is used to redirect an MSI vector
+	 * at a different cpu.  addr_hi/addr_lo coming in are the existing
+	 * values that the MSI core has programmed into the card.  The
+	 * target code is responsible for freeing any resources (if any)
+	 * associated with the old address, and generating a new PCI bus
+	 * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
+	 **/
+
+	void	(*target)   (unsigned int vector, unsigned int cpu,
+			     u32 *addr_hi, u32 *addr_lo);
+};
+
+extern int msi_register(struct msi_ops *ops);
+
 #include <asm/msi.h>
 
 /*
@@ -63,67 +125,6 @@ extern int pci_vector_resources(int last, int nr_released);
 #define msix_mask(address)		(address | PCI_MSIX_FLAGS_BITMASK)
 #define msix_is_pending(address) 	(address & PCI_MSIX_FLAGS_PENDMASK)
 
-/*
- * MSI Defined Data Structures
- */
-#define MSI_ADDRESS_HEADER		0xfee
-#define MSI_ADDRESS_HEADER_SHIFT	12
-#define MSI_ADDRESS_HEADER_MASK		0xfff000
-#define MSI_ADDRESS_DEST_ID_MASK	0xfff0000f
-#define MSI_TARGET_CPU_MASK		0xff
-#define MSI_DELIVERY_MODE		0
-#define MSI_LEVEL_MODE			1	/* Edge always assert */
-#define MSI_TRIGGER_MODE		0	/* MSI is edge sensitive */
-#define MSI_PHYSICAL_MODE		0
-#define MSI_LOGICAL_MODE		1
-#define MSI_REDIRECTION_HINT_MODE	0
-
-struct msg_data {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u32	vector		:  8;
-	__u32	delivery_mode	:  3;	/* 000b: FIXED | 001b: lowest prior */
-	__u32	reserved_1	:  3;
-	__u32	level		:  1;	/* 0: deassert | 1: assert */
-	__u32	trigger		:  1;	/* 0: edge | 1: level */
-	__u32	reserved_2	: 16;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u32	reserved_2	: 16;
-	__u32	trigger		:  1;	/* 0: edge | 1: level */
-	__u32	level		:  1;	/* 0: deassert | 1: assert */
-	__u32	reserved_1	:  3;
-	__u32	delivery_mode	:  3;	/* 000b: FIXED | 001b: lowest prior */
-	__u32	vector		:  8;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-} __attribute__ ((packed));
-
-struct msg_address {
-	union {
-		struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-			__u32	reserved_1	:  2;
-			__u32	dest_mode	:  1;	/*0:physic | 1:logic */
-			__u32	redirection_hint:  1;  	/*0: dedicated CPU
-							  1: lowest priority */
-			__u32	reserved_2	:  4;
- 			__u32	dest_id		: 24;	/* Destination ID */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- 			__u32	dest_id		: 24;	/* Destination ID */
-			__u32	reserved_2	:  4;
-			__u32	redirection_hint:  1;  	/*0: dedicated CPU
-							  1: lowest priority */
-			__u32	dest_mode	:  1;	/*0:physic | 1:logic */
-			__u32	reserved_1	:  2;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-      		}u;
-       		__u32  value;
-	}lo_address;
-	__u32 	hi_address;
-} __attribute__ ((packed));
-
 struct msi_desc {
 	struct {
 		__u8	type	: 5; 	/* {0: unused, 5h:MSI, 11h:MSI-X} */
@@ -132,7 +133,7 @@ struct msi_desc {
 		__u8	reserved: 1; 	/* reserved			  */
 		__u8	entry_nr;    	/* specific enabled entry 	  */
 		__u8	default_vector; /* default pre-assigned vector    */
-		__u8	current_cpu; 	/* current destination cpu	  */
+		__u8	unused; 	/* formerly unused destination cpu*/
 	}msi_attrib;
 
 	struct {
@@ -142,6 +143,14 @@ struct msi_desc {
 
 	void __iomem *mask_base;
 	struct pci_dev *dev;
+
+#ifdef CONFIG_PM
+	/* PM save area for MSIX address/data */
+
+	u32	address_hi_save;
+	u32	address_lo_save;
+	u32	data_save;
+#endif
 };
 
 #endif /* MSI_H */