Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (49 commits)
  [PATCH] acpiphp: fix acpi_path_name
  [PATCH] ibmphp: remove TRUE and FALSE
  [PATCH] PCI Hotplug: add common acpi functions to core
  [PATCH] PCI: kzalloc() conversion in drivers/pci
  [PATCH] acpiphp: Scan slots under the nested P2P bridge
  [PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB
  [PATCH] shpchp: cleanup bus speed handling
  [PATCH] PCI: fix pci_request_region[s] arg
  [PATCH] PCI: Provide a boot parameter to disable MSI
  [PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC
  [PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code
  [PATCH] acpiphp: fix bridge handle
  [PATCH] acpiphp - slot management fix - V4
  [PATCH] acpi: remove dock event handling from ibm_acpi
  [PATCH] acpiphp: add dock event handling
  [PATCH] acpi: export acpi_bus_trim
  [PATCH] acpiphp: add new bus to acpi
  [PATCH] PCI: Move pci_dev_put outside a spinlock
  [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix
  [PATCH] PCI: fix problems with MSI-X on ia64
  ...

1 files changed, 189 insertions, 329 deletions

diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index b4226ff..66123cf 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -82,31 +82,6 @@
 #define SLOT_100MHZ_PCIX_533	0x0f000000
 #define SLOT_133MHZ_PCIX_533	0xf0000000
 
-
-/* Secondary Bus Configuration Register */
-/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */
-#define PCI_33MHZ		0x0
-#define PCI_66MHZ		0x1
-#define PCIX_66MHZ		0x2
-#define PCIX_100MHZ		0x3
-#define PCIX_133MHZ		0x4
-
-/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */
-#define PCI_33MHZ		0x0
-#define PCI_66MHZ		0x1
-#define PCIX_66MHZ		0x2
-#define PCIX_100MHZ		0x3
-#define PCIX_133MHZ		0x4
-#define PCIX_66MHZ_ECC		0x5
-#define PCIX_100MHZ_ECC		0x6
-#define PCIX_133MHZ_ECC		0x7
-#define PCIX_66MHZ_266		0x9
-#define PCIX_100MHZ_266		0xa
-#define PCIX_133MHZ_266		0xb
-#define PCIX_66MHZ_533		0x11
-#define PCIX_100MHZ_533		0x12
-#define PCIX_133MHZ_533		0x13
-
 /* Slot Configuration */
 #define SLOT_NUM		0x0000001F
 #define	FIRST_DEV_NUM		0x00001F00
@@ -231,6 +206,7 @@ static spinlock_t list_lock;
 static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs);
 
 static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds);
+static int hpc_check_cmd_status(struct controller *ctrl);
 
 /* This is the interrupt polling timeout function. */
 static void int_poll_timeout(unsigned long lphp_ctlr)
@@ -303,10 +279,13 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 	int i;
 
 	DBG_ENTER_ROUTINE 
-	
+
+	mutex_lock(&slot->ctrl->cmd_lock);
+
 	if (!php_ctlr) {
 		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
+		retval = -EINVAL;
+		goto out;
 	}
 
 	for (i = 0; i < 10; i++) {
@@ -323,7 +302,8 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 	if (cmd_status & 0x1) { 
 		/* After 1 sec and and the controller is still busy */
 		err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__);
-		return -1;
+		retval = -EBUSY;
+		goto out;
 	}
 
 	++t_slot;
@@ -340,6 +320,17 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 	 * Wait for command completion.
 	 */
 	retval = shpc_wait_cmd(slot->ctrl);
+	if (retval)
+		goto out;
+
+	cmd_status = hpc_check_cmd_status(slot->ctrl);
+	if (cmd_status) {
+		err("%s: Failed to issued command 0x%x (error code = %d)\n",
+		    __FUNCTION__, cmd, cmd_status);
+		retval = -EIO;
+	}
+ out:
+	mutex_unlock(&slot->ctrl->cmd_lock);
 
 	DBG_LEAVE_ROUTINE 
 	return retval;
@@ -532,81 +523,41 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
 
 static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 {
-	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
-	u32 slot_reg;
-	u16 slot_status, sec_bus_status;
-	u8 m66_cap, pcix_cap, pi;
 	int retval = 0;
+	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+	u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot);
+	u8 pcix_cap = (slot_reg >> 12) & 7;
+	u8 m66_cap  = (slot_reg >> 9) & 1;
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
-	}
-	
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
-	dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg);
-	slot_status = (u16) slot_reg;
-	dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status);
-	sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
-
-	pcix_cap = (u8) ((slot_status & 0x3000) >> 12);
-	dbg("%s:  pcix_cap = %x\n", __FUNCTION__, pcix_cap);
-	m66_cap = (u8) ((slot_status & 0x0200) >> 9);
-	dbg("%s:  m66_cap = %x\n", __FUNCTION__, m66_cap);
-
+	dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
+	    __FUNCTION__, slot_reg, pcix_cap, m66_cap);
 
-	if (pi == 2) {
-		switch (pcix_cap) {
-		case 0:
-			*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
-			break;
-		case 1:
-			*value = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			*value = PCI_SPEED_133MHz_PCIX;
-			break;
-		case 4:
-			*value = PCI_SPEED_133MHz_PCIX_266;	
-			break;
-		case 5:
-			*value = PCI_SPEED_133MHz_PCIX_533;	
-			break;
-		case 2:	/* Reserved */
-		default:
-			*value = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			break;
-		}
-	} else {
-		switch (pcix_cap) {
-		case 0:
-			*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
-			break;
-		case 1:
-			*value = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			*value = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 2:	/* Reserved */
-		default:
-			*value = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			break;
-		}
+	switch (pcix_cap) {
+	case 0x0:
+		*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		*value = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		*value = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x4:
+		*value = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0x5:
+		*value = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	case 0x2:
+	default:
+		*value = PCI_SPEED_UNKNOWN;
+		retval = -ENODEV;
+		break;
 	}
 
 	dbg("Adapter speed = %d\n", *value);
-	
 	DBG_LEAVE_ROUTINE 
 	return retval;
 }
@@ -797,6 +748,7 @@ static void hpc_release_ctlr(struct controller *ctrl)
 {
 	struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
 	struct php_ctlr_state_s *p, *p_prev;
+	int i;
 
 	DBG_ENTER_ROUTINE 
 
@@ -805,6 +757,14 @@ static void hpc_release_ctlr(struct controller *ctrl)
 		return ;
 	}
 
+	/*
+	 * Mask all slot event interrupts
+	 */
+	for (i = 0; i < ctrl->num_slots; i++)
+		writel(0xffff3fff, php_ctlr->creg + SLOT1 + (4 * i));
+
+	cleanup_slots(ctrl);
+
 	if (shpchp_poll_mode) {
 	    del_timer(&php_ctlr->int_poll_timer);
 	} else {	
@@ -814,6 +774,7 @@ static void hpc_release_ctlr(struct controller *ctrl)
 			pci_disable_msi(php_ctlr->pci_dev);
 		}
 	}
+
 	if (php_ctlr->pci_dev) {
 		iounmap(php_ctlr->creg);
 		release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
@@ -939,98 +900,66 @@ static int hpc_slot_disable(struct slot * slot)
 
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 {
-	u8 slot_cmd;
-	u8 pi;
-	int retval = 0;
+	int retval;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+	u8 pi, cmd;
 
 	DBG_ENTER_ROUTINE 
-	
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
 
 	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	
-	if (pi == 1) {
-		switch (value) {
-		case 0:
-			slot_cmd = SETA_PCI_33MHZ;
-			break;
-		case 1:
-			slot_cmd = SETA_PCI_66MHZ;
-			break;
-		case 2:
-			slot_cmd = SETA_PCIX_66MHZ;
-			break;
-		case 3:
-			slot_cmd = SETA_PCIX_100MHZ;	
-			break;
-		case 4:
-			slot_cmd = SETA_PCIX_133MHZ;	
-			break;
-		default:
-			slot_cmd = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			return retval;	
-		}
-	} else {
-		switch (value) {
-		case 0:
-			slot_cmd = SETB_PCI_33MHZ;
-			break;
-		case 1:
-			slot_cmd = SETB_PCI_66MHZ;
-			break;
-		case 2:
-			slot_cmd = SETB_PCIX_66MHZ_PM;
-			break;
-		case 3:
-			slot_cmd = SETB_PCIX_100MHZ_PM;	
-			break;
-		case 4:
-			slot_cmd = SETB_PCIX_133MHZ_PM;	
-			break;
-		case 5:
-			slot_cmd = SETB_PCIX_66MHZ_EM;	
-			break;
-		case 6:
-			slot_cmd = SETB_PCIX_100MHZ_EM;	
-			break;
-		case 7:
-			slot_cmd = SETB_PCIX_133MHZ_EM;	
-			break;
-		case 8:
-			slot_cmd = SETB_PCIX_66MHZ_266;	
-			break;
-		case 0x9:
-			slot_cmd = SETB_PCIX_100MHZ_266;	
-			break;
-		case 0xa:
-			slot_cmd = SETB_PCIX_133MHZ_266;	
-			break;
-		case 0xb:
-			slot_cmd = SETB_PCIX_66MHZ_533;	
-			break;
-		case 0xc:
-			slot_cmd = SETB_PCIX_100MHZ_533;	
-			break;
-		case 0xd:
-			slot_cmd = SETB_PCIX_133MHZ_533;	
-			break;
-		default:
-			slot_cmd = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			return retval;	
-		}
+	if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
+		return -EINVAL;
 
+	switch (value) {
+	case PCI_SPEED_33MHz:
+		cmd = SETA_PCI_33MHZ;
+		break;
+	case PCI_SPEED_66MHz:
+		cmd = SETA_PCI_66MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX:
+		cmd = SETA_PCIX_66MHZ;
+		break;
+	case PCI_SPEED_100MHz_PCIX:
+		cmd = SETA_PCIX_100MHZ;
+		break;
+	case PCI_SPEED_133MHz_PCIX:
+		cmd = SETA_PCIX_133MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX_ECC:
+		cmd = SETB_PCIX_66MHZ_EM;
+		break;
+	case PCI_SPEED_100MHz_PCIX_ECC:
+		cmd = SETB_PCIX_100MHZ_EM;
+		break;
+	case PCI_SPEED_133MHz_PCIX_ECC:
+		cmd = SETB_PCIX_133MHZ_EM;
+		break;
+	case PCI_SPEED_66MHz_PCIX_266:
+		cmd = SETB_PCIX_66MHZ_266;
+		break;
+	case PCI_SPEED_100MHz_PCIX_266:
+		cmd = SETB_PCIX_100MHZ_266;
+		break;
+	case PCI_SPEED_133MHz_PCIX_266:
+		cmd = SETB_PCIX_133MHZ_266;
+		break;
+	case PCI_SPEED_66MHz_PCIX_533:
+		cmd = SETB_PCIX_66MHZ_533;
+		break;
+	case PCI_SPEED_100MHz_PCIX_533:
+		cmd = SETB_PCIX_100MHZ_533;
+		break;
+	case PCI_SPEED_133MHz_PCIX_533:
+		cmd = SETB_PCIX_133MHZ_533;
+		break;
+	default:
+		return -EINVAL;
 	}
-	retval = shpc_write_cmd(slot, 0, slot_cmd);
-	if (retval) {
+
+	retval = shpc_write_cmd(slot, 0, cmd);
+	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
-		return -1;
-	}
 
 	DBG_LEAVE_ROUTINE
 	return retval;
@@ -1093,14 +1022,8 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
 		wake_up_interruptible(&ctrl->queue);
 	}
 
-	if ((intr_loc = (intr_loc >> 1)) == 0) {
-		/* Unmask Global Interrupt Mask */
-		temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
-		temp_dword &= 0xfffffffe;
-		writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
-
-		return IRQ_NONE;
-	}
+	if ((intr_loc = (intr_loc >> 1)) == 0)
+		goto out;
 
 	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { 
 	/* To find out which slot has interrupt pending */
@@ -1130,6 +1053,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
 			dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); 
 		}
 	}
+ out:
 	if (!shpchp_poll_mode) {
 		/* Unmask Global Interrupt Mask */
 		temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
@@ -1142,64 +1066,43 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
 
 static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 {
+	int retval = 0;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	int retval = 0;
-	u8 pi;
-	u32 slot_avail1, slot_avail2;
+	u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
+	u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
+	u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
-	}
-
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
-	slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
-
 	if (pi == 2) {
 		if (slot_avail2 & SLOT_133MHZ_PCIX_533)
-			bus_speed = PCIX_133MHZ_533;
+			bus_speed = PCI_SPEED_133MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_100MHZ_PCIX_533)
-			bus_speed = PCIX_100MHZ_533;
+			bus_speed = PCI_SPEED_100MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_66MHZ_PCIX_533)
-			bus_speed = PCIX_66MHZ_533;
+			bus_speed = PCI_SPEED_66MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_133MHZ_PCIX_266)
-			bus_speed = PCIX_133MHZ_266;
+			bus_speed = PCI_SPEED_133MHz_PCIX_266;
 		else if (slot_avail2 & SLOT_100MHZ_PCIX_266)
-			bus_speed = PCIX_100MHZ_266;
+			bus_speed = PCI_SPEED_100MHz_PCIX_266;
 		else if (slot_avail2 & SLOT_66MHZ_PCIX_266)
-			bus_speed = PCIX_66MHZ_266;
-		else if (slot_avail1 & SLOT_133MHZ_PCIX)
-			bus_speed = PCIX_133MHZ;
-		else if (slot_avail1 & SLOT_100MHZ_PCIX)
-			bus_speed = PCIX_100MHZ;
-		else if (slot_avail1 & SLOT_66MHZ_PCIX)
-			bus_speed = PCIX_66MHZ;
-		else if (slot_avail2 & SLOT_66MHZ)
-			bus_speed = PCI_66MHZ;
-		else if (slot_avail1 & SLOT_33MHZ)
-			bus_speed = PCI_33MHZ;
-		else bus_speed = PCI_SPEED_UNKNOWN;
-	} else {
+			bus_speed = PCI_SPEED_66MHz_PCIX_266;
+	}
+
+	if (bus_speed == PCI_SPEED_UNKNOWN) {
 		if (slot_avail1 & SLOT_133MHZ_PCIX)
-			bus_speed = PCIX_133MHZ;
+			bus_speed = PCI_SPEED_133MHz_PCIX;
 		else if (slot_avail1 & SLOT_100MHZ_PCIX)
-			bus_speed = PCIX_100MHZ;
+			bus_speed = PCI_SPEED_100MHz_PCIX;
 		else if (slot_avail1 & SLOT_66MHZ_PCIX)
-			bus_speed = PCIX_66MHZ;
+			bus_speed = PCI_SPEED_66MHz_PCIX;
 		else if (slot_avail2 & SLOT_66MHZ)
-			bus_speed = PCI_66MHZ;
+			bus_speed = PCI_SPEED_66MHz;
 		else if (slot_avail1 & SLOT_33MHZ)
-			bus_speed = PCI_33MHZ;
-		else bus_speed = PCI_SPEED_UNKNOWN;
+			bus_speed = PCI_SPEED_33MHz;
+		else
+			retval = -ENODEV;
 	}
 
 	*value = bus_speed;
@@ -1210,111 +1113,69 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 
 static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 {
+	int retval = 0;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	u16 sec_bus_status;
-	int retval = 0;
-	u8 pi;
+	u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG);
+	u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
+	if ((pi == 1) && (speed_mode > 4)) {
+		*value = PCI_SPEED_UNKNOWN;
+		return -ENODEV;
 	}
 
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
-
-	if (pi == 2) {
-		switch (sec_bus_status & 0x000f) {
-		case 0:
-			bus_speed = PCI_SPEED_33MHz;
-			break;
-		case 1:
-			bus_speed = PCI_SPEED_66MHz;
-			break;
-		case 2:
-			bus_speed = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			bus_speed = PCI_SPEED_100MHz_PCIX;	
-			break;
-		case 4:
-			bus_speed = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 5:
-			bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
-			break;
-		case 6:
-			bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
-			break;
-		case 7:
-			bus_speed = PCI_SPEED_133MHz_PCIX_ECC;	
-			break;
-		case 8:
-			bus_speed = PCI_SPEED_66MHz_PCIX_266;	
-			break;
-		case 9:
-			bus_speed = PCI_SPEED_100MHz_PCIX_266;	
-			break;
-		case 0xa:
-			bus_speed = PCI_SPEED_133MHz_PCIX_266;	
-			break;
-		case 0xb:
-			bus_speed = PCI_SPEED_66MHz_PCIX_533;	
-			break;
-		case 0xc:
-			bus_speed = PCI_SPEED_100MHz_PCIX_533;	
-			break;
-		case 0xd:
-			bus_speed = PCI_SPEED_133MHz_PCIX_533;	
-			break;
-		case 0xe:
-		case 0xf:
-		default:
-			bus_speed = PCI_SPEED_UNKNOWN;
-			break;
-		}
-	} else {
-		/* In the case where pi is undefined, default it to 1 */ 
-		switch (sec_bus_status & 0x0007) {
-		case 0:
-			bus_speed = PCI_SPEED_33MHz;
-			break;
-		case 1:
-			bus_speed = PCI_SPEED_66MHz;
-			break;
-		case 2:
-			bus_speed = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			bus_speed = PCI_SPEED_100MHz_PCIX;	
-			break;
-		case 4:
-			bus_speed = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 5:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */
-			break;
-		case 6:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */
-			break;
-		case 7:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */	
-			break;
-		default:
-			bus_speed = PCI_SPEED_UNKNOWN;
-			break;
-		}
+	switch (speed_mode) {
+	case 0x0:
+		*value = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		*value = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		*value = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		*value = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		*value = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		*value = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		*value = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		*value = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		*value = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		*value = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		*value = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		*value = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		*value = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		*value = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		*value = PCI_SPEED_UNKNOWN;
+		retval = -ENODEV;
+		break;
 	}
 
-	*value = bus_speed;
 	dbg("Current bus speed = %d\n", bus_speed);
 	DBG_LEAVE_ROUTINE 
 	return retval;
@@ -1343,7 +1204,6 @@ static struct hpc_ops shpchp_hpc_ops = {
 	.green_led_blink		= hpc_set_green_led_blink,
 	
 	.release_ctlr			= hpc_release_ctlr,
-	.check_cmd_status		= hpc_check_cmd_status,
 };
 
 inline static int shpc_indirect_creg_read(struct controller *ctrl, int index,
@@ -1375,15 +1235,13 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
 	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
 
 	spin_lock_init(&list_lock);
-	php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
+	php_ctlr = kzalloc(sizeof(*php_ctlr), GFP_KERNEL);
 
 	if (!php_ctlr) {	/* allocate controller state data */
 		err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
 		goto abort;
 	}
 
-	memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s));
-
 	php_ctlr->pci_dev = pdev;	/* save pci_dev in context */
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
@@ -1454,7 +1312,9 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
 	}
 	dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
 
-	init_MUTEX(&ctrl->crit_sect);
+	mutex_init(&ctrl->crit_sect);
+	mutex_init(&ctrl->cmd_lock);
+
 	/* Setup wait queue */
 	init_waitqueue_head(&ctrl->queue);