summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/shpchp_hpc.c
diff options
context:
space:
mode:
authorTaku Izumi <izumi.taku@jp.fujitsu.com>2008-10-23 11:54:39 +0900
committerJesse Barnes <jbarnes@virtuousgeek.org>2008-10-23 16:14:00 -0700
commitbe7bce250a88fbbb5a67204eb148bce8b798780a (patch)
treec30a5f7f145e4b4ab59f139b529eb170fa00f682 /drivers/pci/hotplug/shpchp_hpc.c
parentf98ca311f3a32e2adc229fecd6bf732db07fcca3 (diff)
downloadop-kernel-dev-be7bce250a88fbbb5a67204eb148bce8b798780a.zip
op-kernel-dev-be7bce250a88fbbb5a67204eb148bce8b798780a.tar.gz
PCI hotplug: shpchp: message refinement
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci/hotplug/shpchp_hpc.c')
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c73
1 files changed, 33 insertions, 40 deletions
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 2b69a08..86dc398 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -320,8 +320,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
if (!shpc_poll_ctrl_busy(ctrl)) {
/* After 1 sec and and the controller is still busy */
- ctrl_err(ctrl, "%s : Controller is still busy after 1 sec.\n",
- __func__);
+ ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
retval = -EBUSY;
goto out;
}
@@ -344,8 +343,9 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
cmd_status = hpc_check_cmd_status(slot->ctrl);
if (cmd_status) {
- ctrl_err(ctrl, "%s: Failed to issued command 0x%x "
- "(error code = %d)\n", __func__, cmd, cmd_status);
+ ctrl_err(ctrl,
+ "Failed to issued command 0x%x (error code = %d)\n",
+ cmd, cmd_status);
retval = -EIO;
}
out:
@@ -364,15 +364,15 @@ static int hpc_check_cmd_status(struct controller *ctrl)
break;
case 1:
retval = SWITCH_OPEN;
- ctrl_err(ctrl, "%s: Switch opened!\n", __func__);
+ ctrl_err(ctrl, "Switch opened!\n");
break;
case 2:
retval = INVALID_CMD;
- ctrl_err(ctrl, "%s: Invalid HPC command!\n", __func__);
+ ctrl_err(ctrl, "Invalid HPC command!\n");
break;
case 4:
retval = INVALID_SPEED_MODE;
- ctrl_err(ctrl, "%s: Invalid bus speed/mode!\n", __func__);
+ ctrl_err(ctrl, "Invalid bus speed/mode!\n");
break;
default:
retval = cmd_status;
@@ -773,8 +773,8 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
continue;
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Slot %x with intr, slot register = %x\n",
- __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n",
+ hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
shpchp_handle_switch_change(hp_slot, ctrl);
@@ -949,6 +949,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
u8 i;
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
+ ctrl_dbg(ctrl, "Hotplug Controller:\n");
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450)) {
@@ -958,38 +959,33 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
} else {
ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
if (!ctrl->cap_offset) {
- ctrl_err(ctrl, "%s : cap_offset == 0\n", __func__);
+ ctrl_err(ctrl, "Cannot find PCI capability\n");
goto abort;
}
- ctrl_dbg(ctrl, "%s: cap_offset = %x\n", __func__,
- ctrl->cap_offset);
+ ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset);
rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read base_offset\n",
- __func__);
+ ctrl_err(ctrl, "Cannot read base_offset\n");
goto abort;
}
rc = shpc_indirect_read(ctrl, 3, &tempdword);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read slot config\n",
- __func__);
+ ctrl_err(ctrl, "Cannot read slot config\n");
goto abort;
}
num_slots = tempdword & SLOT_NUM;
- ctrl_dbg(ctrl, "%s: num_slots (indirect) %x\n",
- __func__, num_slots);
+ ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots);
for (i = 0; i < 9 + num_slots; i++) {
rc = shpc_indirect_read(ctrl, i, &tempdword);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read creg "
- "(index = %d)\n", __func__, i);
+ ctrl_err(ctrl,
+ "Cannot read creg (index = %d)\n", i);
goto abort;
}
- ctrl_dbg(ctrl, "%s: offset %d: value %x\n",
- __func__, i, tempdword);
+ ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword);
}
ctrl->mmio_base =
@@ -1003,25 +999,25 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
rc = pci_enable_device(pdev);
if (rc) {
- ctrl_err(ctrl, "%s: pci_enable_device failed\n", __func__);
+ ctrl_err(ctrl, "pci_enable_device failed\n");
goto abort;
}
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
- ctrl_err(ctrl, "%s: cannot reserve MMIO region\n", __func__);
+ ctrl_err(ctrl, "Cannot reserve MMIO region\n");
rc = -1;
goto abort;
}
ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
if (!ctrl->creg) {
- ctrl_err(ctrl, "%s: cannot remap MMIO region %lx @ %lx\n",
- __func__, ctrl->mmio_size, ctrl->mmio_base);
+ ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n",
+ ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
rc = -1;
goto abort;
}
- ctrl_dbg(ctrl, "%s: ctrl->creg %p\n", __func__, ctrl->creg);
+ ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->cmd_lock);
@@ -1040,21 +1036,21 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK |
COMMAND_INTR_MASK | ARBITER_SERR_MASK);
tempdword &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
/* Mask the MRL sensor SERR Mask of individual slot in
* Slot SERR-INT Mask & clear all the existing event if any
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
- "value %x\n", __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+ hp_slot, slot_reg);
slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK |
@@ -1079,8 +1075,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
- ctrl_dbg(ctrl, "%s: request_irq %d for hpc%d (returns %d)\n",
- __func__, ctrl->pci_dev->irq,
+ ctrl_dbg(ctrl, "request_irq %d for hpc%d (returns %d)\n",
+ ctrl->pci_dev->irq,
atomic_read(&shpchp_num_controllers), rc);
if (rc) {
ctrl_err(ctrl, "Can't get irq %d for the hotplug "
@@ -1088,9 +1084,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
goto abort_iounmap;
}
}
- ctrl_dbg(ctrl, "%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n",
- __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn), pdev->irq);
+ ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
/*
* If this is the first controller to be initialized,
@@ -1109,8 +1103,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
- "value %x\n", __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+ hp_slot, slot_reg);
slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
@@ -1123,8 +1117,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n",
- __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
}
return 0;
OpenPOWER on IntegriCloud