diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pci/hotplug/cpqphp_ctrl.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_ctrl.c')
-rw-r--r-- | drivers/pci/hotplug/cpqphp_ctrl.c | 3096 |
1 files changed, 3096 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c new file mode 100644 index 0000000..10a5a76 --- /dev/null +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -0,0 +1,3096 @@ +/* + * Compaq Hot Plug Controller Driver + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <greg@kroah.com> + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/smp_lock.h> +#include <linux/pci.h> +#include "cpqphp.h" + +static u32 configure_new_device(struct controller* ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources); +static int configure_new_function(struct controller* ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources); +static void interrupt_event_handler(struct controller *ctrl); + +static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ +static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */ +static int event_finished; +static unsigned long pushbutton_pending; /* = 0 */ + +/* things needed for the long_delay function */ +static struct semaphore delay_sem; +static wait_queue_head_t delay_wait; + +/* delay is in jiffies to wait for */ +static void long_delay(int delay) +{ + DECLARE_WAITQUEUE(wait, current); + + /* only allow 1 customer into the delay queue at once + * yes this makes some people wait even longer, but who really cares? + * this is for _huge_ delays to make the hardware happy as the + * signals bounce around + */ + down (&delay_sem); + + init_waitqueue_head(&delay_wait); + + add_wait_queue(&delay_wait, &wait); + msleep_interruptible(jiffies_to_msecs(delay)); + remove_wait_queue(&delay_wait, &wait); + + up(&delay_sem); +} + + +/* FIXME: The following line needs to be somewhere else... */ +#define WRONG_BUS_FREQUENCY 0x07 +static u8 handle_switch_change(u8 change, struct controller * ctrl) +{ + int hp_slot; + u8 rc = 0; + u16 temp_word; + struct pci_func *func; + struct event_info *taskInfo; + + if (!change) + return 0; + + /* Switch Change */ + dbg("cpqsbd: Switch interrupt received.\n"); + + for (hp_slot = 0; hp_slot < 6; hp_slot++) { + if (change & (0x1L << hp_slot)) { + /********************************** + * this one changed. + **********************************/ + func = cpqhp_slot_find(ctrl->bus, + (hp_slot + ctrl->slot_device_offset), 0); + + /* this is the structure that tells the worker thread + *what to do */ + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + + temp_word = ctrl->ctrl_int_comp >> 16; + func->presence_save = (temp_word >> hp_slot) & 0x01; + func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; + + if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { + /********************************** + * Switch opened + **********************************/ + + func->switch_save = 0; + + taskInfo->event_type = INT_SWITCH_OPEN; + } else { + /********************************** + * Switch closed + **********************************/ + + func->switch_save = 0x10; + + taskInfo->event_type = INT_SWITCH_CLOSE; + } + } + } + + return rc; +} + +/** + * cpqhp_find_slot: find the struct slot of given device + * @ctrl: scan lots of this controller + * @device: the device id to find + */ +static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device) +{ + struct slot *slot = ctrl->slot; + + while (slot && (slot->device != device)) { + slot = slot->next; + } + + return slot; +} + + +static u8 handle_presence_change(u16 change, struct controller * ctrl) +{ + int hp_slot; + u8 rc = 0; + u8 temp_byte; + u16 temp_word; + struct pci_func *func; + struct event_info *taskInfo; + struct slot *p_slot; + + if (!change) + return 0; + + /********************************** + * Presence Change + **********************************/ + dbg("cpqsbd: Presence/Notify input change.\n"); + dbg(" Changed bits are 0x%4.4x\n", change ); + + for (hp_slot = 0; hp_slot < 6; hp_slot++) { + if (change & (0x0101 << hp_slot)) { + /********************************** + * this one changed. + **********************************/ + func = cpqhp_slot_find(ctrl->bus, + (hp_slot + ctrl->slot_device_offset), 0); + + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + + p_slot = cpqhp_find_slot(ctrl, hp_slot + (readb(ctrl->hpc_reg + SLOT_MASK) >> 4)); + if (!p_slot) + return 0; + + /* If the switch closed, must be a button + * If not in button mode, nevermind */ + if (func->switch_save && (ctrl->push_button == 1)) { + temp_word = ctrl->ctrl_int_comp >> 16; + temp_byte = (temp_word >> hp_slot) & 0x01; + temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02; + + if (temp_byte != func->presence_save) { + /************************************** + * button Pressed (doesn't do anything) + **************************************/ + dbg("hp_slot %d button pressed\n", hp_slot); + taskInfo->event_type = INT_BUTTON_PRESS; + } else { + /********************************** + * button Released - TAKE ACTION!!!! + **********************************/ + dbg("hp_slot %d button released\n", hp_slot); + taskInfo->event_type = INT_BUTTON_RELEASE; + + /* Cancel if we are still blinking */ + if ((p_slot->state == BLINKINGON_STATE) + || (p_slot->state == BLINKINGOFF_STATE)) { + taskInfo->event_type = INT_BUTTON_CANCEL; + dbg("hp_slot %d button cancel\n", hp_slot); + } else if ((p_slot->state == POWERON_STATE) + || (p_slot->state == POWEROFF_STATE)) { + /* info(msg_button_ignore, p_slot->number); */ + taskInfo->event_type = INT_BUTTON_IGNORE; + dbg("hp_slot %d button ignore\n", hp_slot); + } + } + } else { + /* Switch is open, assume a presence change + * Save the presence state */ + temp_word = ctrl->ctrl_int_comp >> 16; + func->presence_save = (temp_word >> hp_slot) & 0x01; + func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; + + if ((!(ctrl->ctrl_int_comp & (0x010000 << hp_slot))) || + (!(ctrl->ctrl_int_comp & (0x01000000 << hp_slot)))) { + /* Present */ + taskInfo->event_type = INT_PRESENCE_ON; + } else { + /* Not Present */ + taskInfo->event_type = INT_PRESENCE_OFF; + } + } + } + } + + return rc; +} + + +static u8 handle_power_fault(u8 change, struct controller * ctrl) +{ + int hp_slot; + u8 rc = 0; + struct pci_func *func; + struct event_info *taskInfo; + + if (!change) + return 0; + + /********************************** + * power fault + **********************************/ + + info("power fault interrupt\n"); + + for (hp_slot = 0; hp_slot < 6; hp_slot++) { + if (change & (0x01 << hp_slot)) { + /********************************** + * this one changed. + **********************************/ + func = cpqhp_slot_find(ctrl->bus, + (hp_slot + ctrl->slot_device_offset), 0); + + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + + if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) { + /********************************** + * power fault Cleared + **********************************/ + func->status = 0x00; + + taskInfo->event_type = INT_POWER_FAULT_CLEAR; + } else { + /********************************** + * power fault + **********************************/ + taskInfo->event_type = INT_POWER_FAULT; + + if (ctrl->rev < 4) { + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + set_SOGO (ctrl); + + /* this is a fatal condition, we want + * to crash the machine to protect from + * data corruption. simulated_NMI + * shouldn't ever return */ + /* FIXME + simulated_NMI(hp_slot, ctrl); */ + + /* The following code causes a software + * crash just in case simulated_NMI did + * return */ + /*FIXME + panic(msg_power_fault); */ + } else { + /* set power fault status for this board */ + func->status = 0xFF; + info("power fault bit %x set\n", hp_slot); + } + } + } + } + + return rc; +} + + +/** + * sort_by_size: sort nodes on the list by their length, smallest first. + * @head: list to sort + * + */ +static int sort_by_size(struct pci_resource **head) +{ + struct pci_resource *current_res; + struct pci_resource *next_res; + int out_of_order = 1; + + if (!(*head)) + return 1; + + if (!((*head)->next)) + return 0; + + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->length > (*head)->next->length)) { + out_of_order++; + current_res = *head; + *head = (*head)->next; + current_res->next = (*head)->next; + (*head)->next = current_res; + } + + current_res = *head; + + while (current_res->next && current_res->next->next) { + if (current_res->next->length > current_res->next->next->length) { + out_of_order++; + next_res = current_res->next; + current_res->next = current_res->next->next; + current_res = current_res->next; + next_res->next = current_res->next; + current_res->next = next_res; + } else + current_res = current_res->next; + } + } /* End of out_of_order loop */ + + return 0; +} + + +/** + * sort_by_max_size: sort nodes on the list by their length, largest first. + * @head: list to sort + * + */ +static int sort_by_max_size(struct pci_resource **head) +{ + struct pci_resource *current_res; + struct pci_resource *next_res; + int out_of_order = 1; + + if (!(*head)) + return 1; + + if (!((*head)->next)) + return 0; + + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->length < (*head)->next->length)) { + out_of_order++; + current_res = *head; + *head = (*head)->next; + current_res->next = (*head)->next; + (*head)->next = current_res; + } + + current_res = *head; + + while (current_res->next && current_res->next->next) { + if (current_res->next->length < current_res->next->next->length) { + out_of_order++; + next_res = current_res->next; + current_res->next = current_res->next->next; + current_res = current_res->next; + next_res->next = current_res->next; + current_res->next = next_res; + } else + current_res = current_res->next; + } + } /* End of out_of_order loop */ + + return 0; +} + + +/** + * do_pre_bridge_resource_split: find node of resources that are unused + * + */ +static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head, + struct pci_resource **orig_head, u32 alignment) +{ + struct pci_resource *prevnode = NULL; + struct pci_resource *node; + struct pci_resource *split_node; + u32 rc; + u32 temp_dword; + dbg("do_pre_bridge_resource_split\n"); + + if (!(*head) || !(*orig_head)) + return NULL; + + rc = cpqhp_resource_sort_and_combine(head); + + if (rc) + return NULL; + + if ((*head)->base != (*orig_head)->base) + return NULL; + + if ((*head)->length == (*orig_head)->length) + return NULL; + + + /* If we got here, there the bridge requires some of the resource, but + * we may be able to split some off of the front */ + + node = *head; + + if (node->length & (alignment -1)) { + /* this one isn't an aligned length, so we'll make a new entry + * and split it up. */ + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + temp_dword = (node->length | (alignment-1)) + 1 - alignment; + + split_node->base = node->base; + split_node->length = temp_dword; + + node->length -= temp_dword; + node->base += split_node->length; + + /* Put it in the list */ + *head = split_node; + split_node->next = node; + } + + if (node->length < alignment) + return NULL; + + /* Now unlink it */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + + return node; +} + + +/** + * do_bridge_resource_split: find one node of resources that aren't in use + * + */ +static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment) +{ + struct pci_resource *prevnode = NULL; + struct pci_resource *node; + u32 rc; + u32 temp_dword; + + rc = cpqhp_resource_sort_and_combine(head); + + if (rc) + return NULL; + + node = *head; + + while (node->next) { + prevnode = node; + node = node->next; + kfree(prevnode); + } + + if (node->length < alignment) + goto error; + + if (node->base & (alignment - 1)) { + /* Short circuit if adjusted size is too small */ + temp_dword = (node->base | (alignment-1)) + 1; + if ((node->length - (temp_dword - node->base)) < alignment) + goto error; + + node->length -= (temp_dword - node->base); + node->base = temp_dword; + } + + if (node->length & (alignment - 1)) + /* There's stuff in use after this node */ + goto error; + + return node; +error: + kfree(node); + return NULL; +} + + +/** + * get_io_resource: find first node of given size not in ISA aliasing window. + * @head: list to search + * @size: size of node to find, must be a power of two. + * + * Description: this function sorts the resource list by size and then returns + * returns the first node of "size" length that is not in the ISA aliasing + * window. If it finds a node larger than "size" it will split it up. + * + */ +static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *prevnode; + struct pci_resource *node; + struct pci_resource *split_node; + u32 temp_dword; + + if (!(*head)) + return NULL; + + if ( cpqhp_resource_sort_and_combine(head) ) + return NULL; + + if ( sort_by_size(head) ) + return NULL; + + for (node = *head; node; node = node->next) { + if (node->length < size) + continue; + + if (node->base & (size - 1)) { + /* this one isn't base aligned properly + * so we'll make a new entry and split it up */ + temp_dword = (node->base | (size-1)) + 1; + + /* Short circuit if adjusted size is too small */ + if ((node->length - (temp_dword - node->base)) < size) + continue; + + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base; + split_node->length = temp_dword - node->base; + node->base = temp_dword; + node->length -= split_node->length; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of non-aligned base */ + + /* Don't need to check if too small since we already did */ + if (node->length > size) { + /* this one is longer than we need + * so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base + size; + split_node->length = node->length - size; + node->length = size; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of too big on top end */ + + /* For IO make sure it's not in the ISA aliasing space */ + if (node->base & 0x300L) + continue; + + /* If we got here, then it is the right size + * Now take it out of the list and break */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + break; + } + + return node; +} + + +/** + * get_max_resource: get largest node which has at least the given size. + * @head: the list to search the node in + * @size: the minimum size of the node to find + * + * Description: Gets the largest node that is at least "size" big from the + * list pointed to by head. It aligns the node on top and bottom + * to "size" alignment before returning it. + */ +static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *max; + struct pci_resource *temp; + struct pci_resource *split_node; + u32 temp_dword; + + if (cpqhp_resource_sort_and_combine(head)) + return NULL; + + if (sort_by_max_size(head)) + return NULL; + + for (max = *head; max; max = max->next) { + /* If not big enough we could probably just bail, + * instead we'll continue to the next. */ + if (max->length < size) + continue; + + if (max->base & (size - 1)) { + /* this one isn't base aligned properly + * so we'll make a new entry and split it up */ + temp_dword = (max->base | (size-1)) + 1; + + /* Short circuit if adjusted size is too small */ + if ((max->length - (temp_dword - max->base)) < size) + continue; + + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = max->base; + split_node->length = temp_dword - max->base; + max->base = temp_dword; + max->length -= split_node->length; + + split_node->next = max->next; + max->next = split_node; + } + + if ((max->base + max->length) & (size - 1)) { + /* this one isn't end aligned properly at the top + * so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + temp_dword = ((max->base + max->length) & ~(size - 1)); + split_node->base = temp_dword; + split_node->length = max->length + max->base + - split_node->base; + max->length -= split_node->length; + + split_node->next = max->next; + max->next = split_node; + } + + /* Make sure it didn't shrink too much when we aligned it */ + if (max->length < size) + continue; + + /* Now take it out of the list */ + temp = *head; + if (temp == max) { + *head = max->next; + } else { + while (temp && temp->next != max) { + temp = temp->next; + } + + temp->next = max->next; + } + + max->next = NULL; + break; + } + + return max; +} + + +/** + * get_resource: find resource of given size and split up larger ones. + * @head: the list to search for resources + * @size: the size limit to use + * + * Description: This function sorts the resource list by size and then + * returns the first node of "size" length. If it finds a node + * larger than "size" it will split it up. + * + * size must be a power of two. + */ +static struct pci_resource *get_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *prevnode; + struct pci_resource *node; + struct pci_resource *split_node; + u32 temp_dword; + + if (cpqhp_resource_sort_and_combine(head)) + return NULL; + + if (sort_by_size(head)) + return NULL; + + for (node = *head; node; node = node->next) { + dbg("%s: req_size =%x node=%p, base=%x, length=%x\n", + __FUNCTION__, size, node, node->base, node->length); + if (node->length < size) + continue; + + if (node->base & (size - 1)) { + dbg("%s: not aligned\n", __FUNCTION__); + /* this one isn't base aligned properly + * so we'll make a new entry and split it up */ + temp_dword = (node->base | (size-1)) + 1; + + /* Short circuit if adjusted size is too small */ + if ((node->length - (temp_dword - node->base)) < size) + continue; + + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base; + split_node->length = temp_dword - node->base; + node->base = temp_dword; + node->length -= split_node->length; + + split_node->next = node->next; + node->next = split_node; + } /* End of non-aligned base */ + + /* Don't need to check if too small since we already did */ + if (node->length > size) { + dbg("%s: too big\n", __FUNCTION__); + /* this one is longer than we need + * so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base + size; + split_node->length = node->length - size; + node->length = size; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of too big on top end */ + + dbg("%s: got one!!!\n", __FUNCTION__); + /* If we got here, then it is the right size + * Now take it out of the list */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + break; + } + return node; +} + + +/** + * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up. + * @head: the list to sort and clean up + * + * Description: Sorts all of the nodes in the list in ascending order by + * their base addresses. Also does garbage collection by + * combining adjacent nodes. + * + * returns 0 if success + */ +int cpqhp_resource_sort_and_combine(struct pci_resource **head) +{ + struct pci_resource *node1; + struct pci_resource *node2; + int out_of_order = 1; + + dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head); + + if (!(*head)) + return 1; + + dbg("*head->next = %p\n",(*head)->next); + + if (!(*head)->next) + return 0; /* only one item on the list, already sorted! */ + + dbg("*head->base = 0x%x\n",(*head)->base); + dbg("*head->next->base = 0x%x\n",(*head)->next->base); + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->base > (*head)->next->base)) { + node1 = *head; + (*head) = (*head)->next; + node1->next = (*head)->next; + (*head)->next = node1; + out_of_order++; + } + + node1 = (*head); + + while (node1->next && node1->next->next) { + if (node1->next->base > node1->next->next->base) { + out_of_order++; + node2 = node1->next; + node1->next = node1->next->next; + node1 = node1->next; + node2->next = node1->next; + node1->next = node2; + } else + node1 = node1->next; + } + } /* End of out_of_order loop */ + + node1 = *head; + + while (node1 && node1->next) { + if ((node1->base + node1->length) == node1->next->base) { + /* Combine */ + dbg("8..\n"); + node1->length += node1->next->length; + node2 = node1->next; + node1->next = node1->next->next; + kfree(node2); + } else + node1 = node1->next; + } + + return 0; +} + + +irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data, struct pt_regs *regs) +{ + struct controller *ctrl = data; + u8 schedule_flag = 0; + u8 reset; + u16 misc; + u32 Diff; + u32 temp_dword; + + + misc = readw(ctrl->hpc_reg + MISC); + /*************************************** + * Check to see if it was our interrupt + ***************************************/ + if (!(misc & 0x000C)) { + return IRQ_NONE; + } + + if (misc & 0x0004) { + /********************************** + * Serial Output interrupt Pending + **********************************/ + + /* Clear the interrupt */ + misc |= 0x0004; + writew(misc, ctrl->hpc_reg + MISC); + + /* Read to clear posted writes */ + misc = readw(ctrl->hpc_reg + MISC); + + dbg ("%s - waking up\n", __FUNCTION__); + wake_up_interruptible(&ctrl->queue); + } + + if (misc & 0x0008) { + /* General-interrupt-input interrupt Pending */ + Diff = readl(ctrl->hpc_reg + INT_INPUT_CLEAR) ^ ctrl->ctrl_int_comp; + + ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); + + /* Clear the interrupt */ + writel(Diff, ctrl->hpc_reg + INT_INPUT_CLEAR); + + /* Read it back to clear any posted writes */ + temp_dword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); + + if (!Diff) + /* Clear all interrupts */ + writel(0xFFFFFFFF, ctrl->hpc_reg + INT_INPUT_CLEAR); + + schedule_flag += handle_switch_change((u8)(Diff & 0xFFL), ctrl); + schedule_flag += handle_presence_change((u16)((Diff & 0xFFFF0000L) >> 16), ctrl); + schedule_flag += handle_power_fault((u8)((Diff & 0xFF00L) >> 8), ctrl); + } + + reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE); + if (reset & 0x40) { + /* Bus reset has completed */ + reset &= 0xCF; + writeb(reset, ctrl->hpc_reg + RESET_FREQ_MODE); + reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE); + wake_up_interruptible(&ctrl->queue); + } + + if (schedule_flag) { + up(&event_semaphore); + dbg("Signal event_semaphore\n"); + } + return IRQ_HANDLED; +} + + +/** + * cpqhp_slot_create - Creates a node and adds it to the proper bus. + * @busnumber - bus where new node is to be located + * + * Returns pointer to the new node or NULL if unsuccessful + */ +struct pci_func *cpqhp_slot_create(u8 busnumber) +{ + struct pci_func *new_slot; + struct pci_func *next; + + new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL); + + if (new_slot == NULL) { + /* I'm not dead yet! + * You will be. */ + return new_slot; + } + + memset(new_slot, 0, sizeof(struct pci_func)); + + new_slot->next = NULL; + new_slot->configured = 1; + + if (cpqhp_slot_list[busnumber] == NULL) { + cpqhp_slot_list[busnumber] = new_slot; + } else { + next = cpqhp_slot_list[busnumber]; + while (next->next != NULL) + next = next->next; + next->next = new_slot; + } + return new_slot; +} + + +/** + * slot_remove - Removes a node from the linked list of slots. + * @old_slot: slot to remove + * + * Returns 0 if successful, !0 otherwise. + */ +static int slot_remove(struct pci_func * old_slot) +{ + struct pci_func *next; + + if (old_slot == NULL) + return 1; + + next = cpqhp_slot_list[old_slot->bus]; + + if (next == NULL) { + return 1; + } + + if (next == old_slot) { + cpqhp_slot_list[old_slot->bus] = old_slot->next; + cpqhp_destroy_board_resources(old_slot); + kfree(old_slot); + return 0; + } + + while ((next->next != old_slot) && (next->next != NULL)) { + next = next->next; + } + + if (next->next == old_slot) { + next->next = old_slot->next; + cpqhp_destroy_board_resources(old_slot); + kfree(old_slot); + return 0; + } else + return 2; +} + + +/** + * bridge_slot_remove - Removes a node from the linked list of slots. + * @bridge: bridge to remove + * + * Returns 0 if successful, !0 otherwise. + */ +static int bridge_slot_remove(struct pci_func *bridge) +{ + u8 subordinateBus, secondaryBus; + u8 tempBus; + struct pci_func *next; + + secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; + subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; + + for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { + next = cpqhp_slot_list[tempBus]; + + while (!slot_remove(next)) { + next = cpqhp_slot_list[tempBus]; + } + } + + next = cpqhp_slot_list[bridge->bus]; + + if (next == NULL) + return 1; + + if (next == bridge) { + cpqhp_slot_list[bridge->bus] = bridge->next; + goto out; + } + + while ((next->next != bridge) && (next->next != NULL)) + next = next->next; + + if (next->next != bridge) + return 2; + next->next = bridge->next; +out: + kfree(bridge); + return 0; +} + + +/** + * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed + * @bus: bus to find + * @device: device to find + * @index: is 0 for first function found, 1 for the second... + * + * Returns pointer to the node if successful, %NULL otherwise. + */ +struct pci_func *cpqhp_slot_find(u8 bus, u8 device, u8 index) +{ + int found = -1; + struct pci_func *func; + + func = cpqhp_slot_list[bus]; + + if ((func == NULL) || ((func->device == device) && (index == 0))) + return func; + + if (func->device == device) + found++; + + while (func->next != NULL) { + func = func->next; + + if (func->device == device) + found++; + + if (found == index) + return func; + } + + return NULL; +} + + +/* DJZ: I don't think is_bridge will work as is. + * FIXME */ +static int is_bridge(struct pci_func * func) +{ + /* Check the header type */ + if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) + return 1; + else + return 0; +} + + +/** + * set_controller_speed - set the frequency and/or mode of a specific + * controller segment. + * + * @ctrl: controller to change frequency/mode for. + * @adapter_speed: the speed of the adapter we want to match. + * @hp_slot: the slot number where the adapter is installed. + * + * Returns 0 if we successfully change frequency and/or mode to match the + * adapter speed. + * + */ +static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) +{ + struct slot *slot; + u8 reg; + u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); + u16 reg16; + u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); + + if (ctrl->speed == adapter_speed) + return 0; + + /* We don't allow freq/mode changes if we find another adapter running + * in another slot on this controller */ + for(slot = ctrl->slot; slot; slot = slot->next) { + if (slot->device == (hp_slot + ctrl->slot_device_offset)) + continue; + if (!slot->hotplug_slot && !slot->hotplug_slot->info) + continue; + if (slot->hotplug_slot->info->adapter_status == 0) + continue; + /* If another adapter is running on the same segment but at a + * lower speed/mode, we allow the new adapter to function at + * this rate if supported */ + if (ctrl->speed < adapter_speed) + return 0; + + return 1; + } + + /* If the controller doesn't support freq/mode changes and the + * controller is running at a higher mode, we bail */ + if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) + return 1; + + /* But we allow the adapter to run at a lower rate if possible */ + if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) + return 0; + + /* We try to set the max speed supported by both the adapter and + * controller */ + if (ctrl->speed_capability < adapter_speed) { + if (ctrl->speed == ctrl->speed_capability) + return 0; + adapter_speed = ctrl->speed_capability; + } + + writel(0x0L, ctrl->hpc_reg + LED_CONTROL); + writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE); + + set_SOGO(ctrl); + wait_for_ctrl_irq(ctrl); + + if (adapter_speed != PCI_SPEED_133MHz_PCIX) + reg = 0xF5; + else + reg = 0xF4; + pci_write_config_byte(ctrl->pci_dev, 0x41, reg); + + reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ); + reg16 &= ~0x000F; + switch(adapter_speed) { + case(PCI_SPEED_133MHz_PCIX): + reg = 0x75; + reg16 |= 0xB; + break; + case(PCI_SPEED_100MHz_PCIX): + reg = 0x74; + reg16 |= 0xA; + break; + case(PCI_SPEED_66MHz_PCIX): + reg = 0x73; + reg16 |= 0x9; + break; + case(PCI_SPEED_66MHz): + reg = 0x73; + reg16 |= 0x1; + break; + default: /* 33MHz PCI 2.2 */ + reg = 0x71; + break; + + } + reg16 |= 0xB << 12; + writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ); + + mdelay(5); + + /* Reenable interrupts */ + writel(0, ctrl->hpc_reg + INT_MASK); + + pci_write_config_byte(ctrl->pci_dev, 0x41, reg); + + /* Restart state machine */ + reg = ~0xF; + pci_read_config_byte(ctrl->pci_dev, 0x43, ®); + pci_write_config_byte(ctrl->pci_dev, 0x43, reg); + + /* Only if mode change...*/ + if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || + ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) + set_SOGO(ctrl); + + wait_for_ctrl_irq(ctrl); + mdelay(1100); + + /* Restore LED/Slot state */ + writel(leds, ctrl->hpc_reg + LED_CONTROL); + writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE); + + set_SOGO(ctrl); + wait_for_ctrl_irq(ctrl); + + ctrl->speed = adapter_speed; + slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + info("Successfully changed frequency/mode for adapter in slot %d\n", + slot->number); + return 0; +} + +/* the following routines constitute the bulk of the + hotplug controller logic + */ + + +/** + * board_replaced - Called after a board has been replaced in the system. + * + * This is only used if we don't have resources for hot add + * Turns power on for the board + * Checks to see if board is the same + * If board is same, reconfigures it + * If board isn't same, turns it back off. + * + */ +static u32 board_replaced(struct pci_func *func, struct controller *ctrl) +{ + u8 hp_slot; + u8 temp_byte; + u8 adapter_speed; + u32 index; + u32 rc = 0; + u32 src = 8; + + hp_slot = func->device - ctrl->slot_device_offset; + + if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) { + /********************************** + * The switch is open. + **********************************/ + rc = INTERLOCK_OPEN; + } else if (is_slot_enabled (ctrl, hp_slot)) { + /********************************** + * The board is already on + **********************************/ + rc = CARD_FUNCTIONING; + } else { + down(&ctrl->crit_sect); + + /* turn on board without attaching to the bus */ + enable_slot_power (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + /* Change bits in slot power register to force another shift out + * NOTE: this is to work around the timer bug */ + temp_byte = readb(ctrl->hpc_reg + SLOT_POWER); + writeb(0x00, ctrl->hpc_reg + SLOT_POWER); + writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + adapter_speed = get_adapter_speed(ctrl, hp_slot); + if (ctrl->speed != adapter_speed) + if (set_controller_speed(ctrl, adapter_speed, hp_slot)) + rc = WRONG_BUS_FREQUENCY; + + /* turn off board without attaching to the bus */ + disable_slot_power (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + if (rc) + return rc; + + down(&ctrl->crit_sect); + + slot_enable (ctrl, hp_slot); + green_LED_blink (ctrl, hp_slot); + + amber_LED_off (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + /* Wait for ~1 second because of hot plug spec */ + long_delay(1*HZ); + + /* Check for a power fault */ + if (func->status == 0xFF) { + /* power fault occurred, but it was benign */ + rc = POWER_FAILURE; + func->status = 0; + } else + rc = cpqhp_valid_replace(ctrl, func); + + if (!rc) { + /* It must be the same board */ + + rc = cpqhp_configure_board(ctrl, func); + + if (rc || src) { + /* If configuration fails, turn it off + * Get slot won't work for devices behind + * bridges, but in this case it will always be + * called for the "base" bus/dev/func of an + * adapter. */ + + down(&ctrl->crit_sect); + + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + if (rc) + return rc; + else + return 1; + } + + func->status = 0; + func->switch_save = 0x10; + + index = 1; + while (((func = cpqhp_slot_find(func->bus, func->device, index)) != NULL) && !rc) { + rc |= cpqhp_configure_board(ctrl, func); + index++; + } + + if (rc) { + /* If configuration fails, turn it off + * Get slot won't work for devices behind + * bridges, but in this case it will always be + * called for the "base" bus/dev/func of an + * adapter. */ + + down(&ctrl->crit_sect); + + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + return rc; + } + /* Done configuring so turn LED on full time */ + + down(&ctrl->crit_sect); + + green_LED_on (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + rc = 0; + } else { + /* Something is wrong + + * Get slot won't work for devices behind bridges, but + * in this case it will always be called for the "base" + * bus/dev/func of an adapter. */ + + down(&ctrl->crit_sect); + + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + } + + } + return rc; + +} + + +/** + * board_added - Called after a board has been added to the system. + * + * Turns power on for the board + * Configures board + * + */ +static u32 board_added(struct pci_func *func, struct controller *ctrl) +{ + u8 hp_slot; + u8 temp_byte; + u8 adapter_speed; + int index; + u32 temp_register = 0xFFFFFFFF; + u32 rc = 0; + struct pci_func *new_slot = NULL; + struct slot *p_slot; + struct resource_lists res_lists; + + hp_slot = func->device - ctrl->slot_device_offset; + dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", + __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + + down(&ctrl->crit_sect); + + /* turn on board without attaching to the bus */ + enable_slot_power(ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + /* Change bits in slot power register to force another shift out + * NOTE: this is to work around the timer bug */ + temp_byte = readb(ctrl->hpc_reg + SLOT_POWER); + writeb(0x00, ctrl->hpc_reg + SLOT_POWER); + writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + adapter_speed = get_adapter_speed(ctrl, hp_slot); + if (ctrl->speed != adapter_speed) + if (set_controller_speed(ctrl, adapter_speed, hp_slot)) + rc = WRONG_BUS_FREQUENCY; + + /* turn off board without attaching to the bus */ + disable_slot_power (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq(ctrl); + + up(&ctrl->crit_sect); + + if (rc) + return rc; + + p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + /* turn on board and blink green LED */ + + dbg("%s: before down\n", __FUNCTION__); + down(&ctrl->crit_sect); + dbg("%s: after down\n", __FUNCTION__); + + dbg("%s: before slot_enable\n", __FUNCTION__); + slot_enable (ctrl, hp_slot); + + dbg("%s: before green_LED_blink\n", __FUNCTION__); + green_LED_blink (ctrl, hp_slot); + + dbg("%s: before amber_LED_blink\n", __FUNCTION__); + amber_LED_off (ctrl, hp_slot); + + dbg("%s: before set_SOGO\n", __FUNCTION__); + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__); + wait_for_ctrl_irq (ctrl); + dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__); + + dbg("%s: before up\n", __FUNCTION__); + up(&ctrl->crit_sect); + dbg("%s: after up\n", __FUNCTION__); + + /* Wait for ~1 second because of hot plug spec */ + dbg("%s: before long_delay\n", __FUNCTION__); + long_delay(1*HZ); + dbg("%s: after long_delay\n", __FUNCTION__); + + dbg("%s: func status = %x\n", __FUNCTION__, func->status); + /* Check for a power fault */ + if (func->status == 0xFF) { + /* power fault occurred, but it was benign */ + temp_register = 0xFFFFFFFF; + dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); + rc = POWER_FAILURE; + func->status = 0; + } else { + /* Get vendor/device ID u32 */ + ctrl->pci_bus->number = func->bus; + rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register); + dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc); + dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register); + + if (rc != 0) { + /* Something's wrong here */ + temp_register = 0xFFFFFFFF; + dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register); + } + /* Preset return code. It will be changed later if things go okay. */ + rc = NO_ADAPTER_PRESENT; + } + + /* All F's is an empty slot or an invalid board */ + if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */ + res_lists.io_head = ctrl->io_head; + res_lists.mem_head = ctrl->mem_head; + res_lists.p_mem_head = ctrl->p_mem_head; + res_lists.bus_head = ctrl->bus_head; + res_lists.irqs = NULL; + + rc = configure_new_device(ctrl, func, 0, &res_lists); + + dbg("%s: back from configure_new_device\n", __FUNCTION__); + ctrl->io_head = res_lists.io_head; + ctrl->mem_head = res_lists.mem_head; + ctrl->p_mem_head = res_lists.p_mem_head; + ctrl->bus_head = res_lists.bus_head; + + cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); + cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); + cpqhp_resource_sort_and_combine(&(ctrl->io_head)); + cpqhp_resource_sort_and_combine(&(ctrl->bus_head)); + + if (rc) { + down(&ctrl->crit_sect); + + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + return rc; + } else { + cpqhp_save_slot_config(ctrl, func); + } + + + func->status = 0; + func->switch_save = 0x10; + func->is_a_board = 0x01; + + /* next, we will instantiate the linux pci_dev structures (with + * appropriate driver notification, if already present) */ + dbg("%s: configure linux pci_dev structure\n", __FUNCTION__); + index = 0; + do { + new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++); + if (new_slot && !new_slot->pci_dev) { + cpqhp_configure_device(ctrl, new_slot); + } + } while (new_slot); + + down(&ctrl->crit_sect); + + green_LED_on (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + } else { + down(&ctrl->crit_sect); + + amber_LED_on (ctrl, hp_slot); + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + return rc; + } + return 0; +} + + +/** + * remove_board - Turns off slot and LED's + * + */ +static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl) +{ + int index; + u8 skip = 0; + u8 device; + u8 hp_slot; + u8 temp_byte; + u32 rc; + struct resource_lists res_lists; + struct pci_func *temp_func; + + if (cpqhp_unconfigure_device(func)) + return 1; + + device = func->device; + + hp_slot = func->device - ctrl->slot_device_offset; + dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); + + /* When we get here, it is safe to change base address registers. + * We will attempt to save the base address register lengths */ + if (replace_flag || !ctrl->add_support) + rc = cpqhp_save_base_addr_length(ctrl, func); + else if (!func->bus_head && !func->mem_head && + !func->p_mem_head && !func->io_head) { + /* Here we check to see if we've saved any of the board's + * resources already. If so, we'll skip the attempt to + * determine what's being used. */ + index = 0; + temp_func = cpqhp_slot_find(func->bus, func->device, index++); + while (temp_func) { + if (temp_func->bus_head || temp_func->mem_head + || temp_func->p_mem_head || temp_func->io_head) { + skip = 1; + break; + } + temp_func = cpqhp_slot_find(temp_func->bus, temp_func->device, index++); + } + + if (!skip) + rc = cpqhp_save_used_resources(ctrl, func); + } + /* Change status to shutdown */ + if (func->is_a_board) + func->status = 0x01; + func->configured = 0; + + down(&ctrl->crit_sect); + + green_LED_off (ctrl, hp_slot); + slot_disable (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* turn off SERR for slot */ + temp_byte = readb(ctrl->hpc_reg + SLOT_SERR); + temp_byte &= ~(0x01 << hp_slot); + writeb(temp_byte, ctrl->hpc_reg + SLOT_SERR); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + + if (!replace_flag && ctrl->add_support) { + while (func) { + res_lists.io_head = ctrl->io_head; + res_lists.mem_head = ctrl->mem_head; + res_lists.p_mem_head = ctrl->p_mem_head; + res_lists.bus_head = ctrl->bus_head; + + cpqhp_return_board_resources(func, &res_lists); + + ctrl->io_head = res_lists.io_head; + ctrl->mem_head = res_lists.mem_head; + ctrl->p_mem_head = res_lists.p_mem_head; + ctrl->bus_head = res_lists.bus_head; + + cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); + cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); + cpqhp_resource_sort_and_combine(&(ctrl->io_head)); + cpqhp_resource_sort_and_combine(&(ctrl->bus_head)); + + if (is_bridge(func)) { + bridge_slot_remove(func); + } else + slot_remove(func); + + func = cpqhp_slot_find(ctrl->bus, device, 0); + } + + /* Setup slot structure with entry for empty slot */ + func = cpqhp_slot_create(ctrl->bus); + + if (func == NULL) + return 1; + + func->bus = ctrl->bus; + func->device = device; + func->function = 0; + func->configured = 0; + func->switch_save = 0x10; + func->is_a_board = 0; + func->p_task_event = NULL; + } + + return 0; +} + +static void pushbutton_helper_thread(unsigned long data) +{ + pushbutton_pending = data; + up(&event_semaphore); +} + + +/* this is the main worker thread */ +static int event_thread(void* data) +{ + struct controller *ctrl; + lock_kernel(); + daemonize("phpd_event"); + + unlock_kernel(); + + while (1) { + dbg("!!!!event_thread sleeping\n"); + down_interruptible (&event_semaphore); + dbg("event_thread woken finished = %d\n", event_finished); + if (event_finished) break; + /* Do stuff here */ + if (pushbutton_pending) + cpqhp_pushbutton_thread(pushbutton_pending); + else + for (ctrl = cpqhp_ctrl_list; ctrl; ctrl=ctrl->next) + interrupt_event_handler(ctrl); + } + dbg("event_thread signals exit\n"); + up(&event_exit); + return 0; +} + + +int cpqhp_event_start_thread(void) +{ + int pid; + + /* initialize our semaphores */ + init_MUTEX(&delay_sem); + init_MUTEX_LOCKED(&event_semaphore); + init_MUTEX_LOCKED(&event_exit); + event_finished=0; + + pid = kernel_thread(event_thread, NULL, 0); + if (pid < 0) { + err ("Can't start up our event thread\n"); + return -1; + } + dbg("Our event thread pid = %d\n", pid); + return 0; +} + + +void cpqhp_event_stop_thread(void) +{ + event_finished = 1; + dbg("event_thread finish command given\n"); + up(&event_semaphore); + dbg("wait for event_thread to exit\n"); + down(&event_exit); +} + + +static int update_slot_info(struct controller *ctrl, struct slot *slot) +{ + struct hotplug_slot_info *info; + int result; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->power_status = get_slot_enabled(ctrl, slot); + info->attention_status = cpq_get_attention_status(ctrl, slot); + info->latch_status = cpq_get_latch_status(ctrl, slot); + info->adapter_status = get_presence_status(ctrl, slot); + result = pci_hp_change_slot_info(slot->hotplug_slot, info); + kfree (info); + return result; +} + +static void interrupt_event_handler(struct controller *ctrl) +{ + int loop = 0; + int change = 1; + struct pci_func *func; + u8 hp_slot; + struct slot *p_slot; + + while (change) { + change = 0; + + for (loop = 0; loop < 10; loop++) { + /* dbg("loop %d\n", loop); */ + if (ctrl->event_queue[loop].event_type != 0) { + hp_slot = ctrl->event_queue[loop].hp_slot; + + func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); + if (!func) + return; + + p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + if (!p_slot) + return; + + dbg("hp_slot %d, func %p, p_slot %p\n", + hp_slot, func, p_slot); + + if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) { + dbg("button pressed\n"); + } else if (ctrl->event_queue[loop].event_type == + INT_BUTTON_CANCEL) { + dbg("button cancel\n"); + del_timer(&p_slot->task_event); + + down(&ctrl->crit_sect); + + if (p_slot->state == BLINKINGOFF_STATE) { + /* slot is on */ + dbg("turn on green LED\n"); + green_LED_on (ctrl, hp_slot); + } else if (p_slot->state == BLINKINGON_STATE) { + /* slot is off */ + dbg("turn off green LED\n"); + green_LED_off (ctrl, hp_slot); + } + + info(msg_button_cancel, p_slot->number); + + p_slot->state = STATIC_STATE; + + amber_LED_off (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + } + /*** button Released (No action on press...) */ + else if (ctrl->event_queue[loop].event_type == INT_BUTTON_RELEASE) { + dbg("button release\n"); + + if (is_slot_enabled (ctrl, hp_slot)) { + dbg("slot is on\n"); + p_slot->state = BLINKINGOFF_STATE; + info(msg_button_off, p_slot->number); + } else { + dbg("slot is off\n"); + p_slot->state = BLINKINGON_STATE; + info(msg_button_on, p_slot->number); + } + down(&ctrl->crit_sect); + + dbg("blink green LED and turn off amber\n"); + + amber_LED_off (ctrl, hp_slot); + green_LED_blink (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + + up(&ctrl->crit_sect); + init_timer(&p_slot->task_event); + p_slot->hp_slot = hp_slot; + p_slot->ctrl = ctrl; +/* p_slot->physical_slot = physical_slot; */ + p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ + p_slot->task_event.function = pushbutton_helper_thread; + p_slot->task_event.data = (u32) p_slot; + + dbg("add_timer p_slot = %p\n", p_slot); + add_timer(&p_slot->task_event); + } + /***********POWER FAULT */ + else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) { + dbg("power fault\n"); + } else { + /* refresh notification */ + if (p_slot) + update_slot_info(ctrl, p_slot); + } + + ctrl->event_queue[loop].event_type = 0; + + change = 1; + } + } /* End of FOR loop */ + } + + return; +} + + +/** + * cpqhp_pushbutton_thread + * + * Scheduled procedure to handle blocking stuff for the pushbuttons + * Handles all pending events and exits. + * + */ +void cpqhp_pushbutton_thread(unsigned long slot) +{ + u8 hp_slot; + u8 device; + struct pci_func *func; + struct slot *p_slot = (struct slot *) slot; + struct controller *ctrl = (struct controller *) p_slot->ctrl; + + pushbutton_pending = 0; + hp_slot = p_slot->hp_slot; + + device = p_slot->device; + + if (is_slot_enabled(ctrl, hp_slot)) { + p_slot->state = POWEROFF_STATE; + /* power Down board */ + func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0); + dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl); + if (!func) { + dbg("Error! func NULL in %s\n", __FUNCTION__); + return ; + } + + if (func != NULL && ctrl != NULL) { + if (cpqhp_process_SS(ctrl, func) != 0) { + amber_LED_on (ctrl, hp_slot); + green_LED_on (ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + } + } + + p_slot->state = STATIC_STATE; + } else { + p_slot->state = POWERON_STATE; + /* slot is off */ + + func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0); + dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl); + if (!func) { + dbg("Error! func NULL in %s\n", __FUNCTION__); + return ; + } + + if (func != NULL && ctrl != NULL) { + if (cpqhp_process_SI(ctrl, func) != 0) { + amber_LED_on(ctrl, hp_slot); + green_LED_off(ctrl, hp_slot); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + } + } + + p_slot->state = STATIC_STATE; + } + + return; +} + + +int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func) +{ + u8 device, hp_slot; + u16 temp_word; + u32 tempdword; + int rc; + struct slot* p_slot; + int physical_slot = 0; + + tempdword = 0; + + device = func->device; + hp_slot = device - ctrl->slot_device_offset; + p_slot = cpqhp_find_slot(ctrl, device); + if (p_slot) + physical_slot = p_slot->number; + + /* Check to see if the interlock is closed */ + tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); + + if (tempdword & (0x01 << hp_slot)) { + return 1; + } + + if (func->is_a_board) { + rc = board_replaced(func, ctrl); + } else { + /* add board */ + slot_remove(func); + + func = cpqhp_slot_create(ctrl->bus); + if (func == NULL) + return 1; + + func->bus = ctrl->bus; + func->device = device; + func->function = 0; + func->configured = 0; + func->is_a_board = 1; + + /* We have to save the presence info for these slots */ + temp_word = ctrl->ctrl_int_comp >> 16; + func->presence_save = (temp_word >> hp_slot) & 0x01; + func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; + + if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { + func->switch_save = 0; + } else { + func->switch_save = 0x10; + } + + rc = board_added(func, ctrl); + if (rc) { + if (is_bridge(func)) { + bridge_slot_remove(func); + } else + slot_remove(func); + + /* Setup slot structure with entry for empty slot */ + func = cpqhp_slot_create(ctrl->bus); + + if (func == NULL) + return 1; + + func->bus = ctrl->bus; + func->device = device; + func->function = 0; + func->configured = 0; + func->is_a_board = 0; + + /* We have to save the presence info for these slots */ + temp_word = ctrl->ctrl_int_comp >> 16; + func->presence_save = (temp_word >> hp_slot) & 0x01; + func->presence_save |= + (temp_word >> (hp_slot + 7)) & 0x02; + + if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { + func->switch_save = 0; + } else { + func->switch_save = 0x10; + } + } + } + + if (rc) { + dbg("%s: rc = %d\n", __FUNCTION__, rc); + } + + if (p_slot) + update_slot_info(ctrl, p_slot); + + return rc; +} + + +int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) +{ + u8 device, class_code, header_type, BCR; + u8 index = 0; + u8 replace_flag; + u32 rc = 0; + unsigned int devfn; + struct slot* p_slot; + struct pci_bus *pci_bus = ctrl->pci_bus; + int physical_slot=0; + + device = func->device; + func = cpqhp_slot_find(ctrl->bus, device, index++); + p_slot = cpqhp_find_slot(ctrl, device); + if (p_slot) { + physical_slot = p_slot->number; + } + + /* Make sure there are no video controllers here */ + while (func && !rc) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Check the Class Code */ + rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); + if (rc) + return rc; + + if (class_code == PCI_BASE_CLASS_DISPLAY) { + /* Display/Video adapter (not supported) */ + rc = REMOVE_NOT_SUPPORTED; + } else { + /* See if it's a bridge */ + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; + + /* If it's a bridge, check the VGA Enable bit */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); + if (rc) + return rc; + + /* If the VGA Enable bit is set, remove isn't + * supported */ + if (BCR & PCI_BRIDGE_CTL_VGA) { + rc = REMOVE_NOT_SUPPORTED; + } + } + } + + func = cpqhp_slot_find(ctrl->bus, device, index++); + } + + func = cpqhp_slot_find(ctrl->bus, device, 0); + if ((func != NULL) && !rc) { + /* FIXME: Replace flag should be passed into process_SS */ + replace_flag = !(ctrl->add_support); + rc = remove_board(func, replace_flag, ctrl); + } else if (!rc) { + rc = 1; + } + + if (p_slot) + update_slot_info(ctrl, p_slot); + + return rc; +} + +/** + * switch_leds: switch the leds, go from one site to the other. + * @ctrl: controller to use + * @num_of_slots: number of slots to use + * @direction: 1 to start from the left side, 0 to start right. + */ +static void switch_leds(struct controller *ctrl, const int num_of_slots, + u32 *work_LED, const int direction) +{ + int loop; + + for (loop = 0; loop < num_of_slots; loop++) { + if (direction) + *work_LED = *work_LED >> 1; + else + *work_LED = *work_LED << 1; + writel(*work_LED, ctrl->hpc_reg + LED_CONTROL); + + set_SOGO(ctrl); + + /* Wait for SOGO interrupt */ + wait_for_ctrl_irq(ctrl); + + /* Get ready for next iteration */ + long_delay((2*HZ)/10); + } +} + +/** + * hardware_test - runs hardware tests + * + * For hot plug ctrl folks to play with. + * test_num is the number written to the "test" file in sysfs + * + */ +int cpqhp_hardware_test(struct controller *ctrl, int test_num) +{ + u32 save_LED; + u32 work_LED; + int loop; + int num_of_slots; + + num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f; + + switch (test_num) { + case 1: + /* Do stuff here! */ + + /* Do that funky LED thing */ + /* so we can restore them later */ + save_LED = readl(ctrl->hpc_reg + LED_CONTROL); + work_LED = 0x01010101; + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + + work_LED = 0x01010000; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + work_LED = 0x00000101; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + + work_LED = 0x01010000; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + for (loop = 0; loop < num_of_slots; loop++) { + set_SOGO(ctrl); + + /* Wait for SOGO interrupt */ + wait_for_ctrl_irq (ctrl); + + /* Get ready for next iteration */ + long_delay((3*HZ)/10); + work_LED = work_LED >> 16; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + + set_SOGO(ctrl); + + /* Wait for SOGO interrupt */ + wait_for_ctrl_irq (ctrl); + + /* Get ready for next iteration */ + long_delay((3*HZ)/10); + work_LED = work_LED << 16; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + work_LED = work_LED << 1; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + } + + /* put it back the way it was */ + writel(save_LED, ctrl->hpc_reg + LED_CONTROL); + + set_SOGO(ctrl); + + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + break; + case 2: + /* Do other stuff here! */ + break; + case 3: + /* and more... */ + break; + } + return 0; +} + + +/** + * configure_new_device - Configures the PCI header information of one board. + * + * @ctrl: pointer to controller structure + * @func: pointer to function structure + * @behind_bridge: 1 if this is a recursive call, 0 if not + * @resources: pointer to set of resource lists + * + * Returns 0 if success + * + */ +static u32 configure_new_device(struct controller * ctrl, struct pci_func * func, + u8 behind_bridge, struct resource_lists * resources) +{ + u8 temp_byte, function, max_functions, stop_it; + int rc; + u32 ID; + struct pci_func *new_slot; + int index; + + new_slot = func; + + dbg("%s\n", __FUNCTION__); + /* Check for Multi-function device */ + ctrl->pci_bus->number = func->bus; + rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte); + if (rc) { + dbg("%s: rc = %d\n", __FUNCTION__, rc); + return rc; + } + + if (temp_byte & 0x80) /* Multi-function device */ + max_functions = 8; + else + max_functions = 1; + + function = 0; + + do { + rc = configure_new_function(ctrl, new_slot, behind_bridge, resources); + + if (rc) { + dbg("configure_new_function failed %d\n",rc); + index = 0; + + while (new_slot) { + new_slot = cpqhp_slot_find(new_slot->bus, new_slot->device, index++); + + if (new_slot) + cpqhp_return_board_resources(new_slot, resources); + } + + return rc; + } + + function++; + + stop_it = 0; + + /* The following loop skips to the next present function + * and creates a board structure */ + + while ((function < max_functions) && (!stop_it)) { + pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID); + + if (ID == 0xFFFFFFFF) { /* There's nothing there. */ + function++; + } else { /* There's something there */ + /* Setup slot structure. */ + new_slot = cpqhp_slot_create(func->bus); + + if (new_slot == NULL) + return 1; + + new_slot->bus = func->bus; + new_slot->device = func->device; + new_slot->function = function; + new_slot->is_a_board = 1; + new_slot->status = 0; + + stop_it++; + } + } + + } while (function < max_functions); + dbg("returning from configure_new_device\n"); + + return 0; +} + + +/* + Configuration logic that involves the hotplug data structures and + their bookkeeping + */ + + +/** + * configure_new_function - Configures the PCI header information of one device + * + * @ctrl: pointer to controller structure + * @func: pointer to function structure + * @behind_bridge: 1 if this is a recursive call, 0 if not + * @resources: pointer to set of resource lists + * + * Calls itself recursively for bridged devices. + * Returns 0 if success + * + */ +static int configure_new_function(struct controller *ctrl, struct pci_func *func, + u8 behind_bridge, + struct resource_lists *resources) +{ + int cloop; + u8 IRQ = 0; + u8 temp_byte; + u8 device; + u8 class_code; + u16 command; + u16 temp_word; + u32 temp_dword; + u32 rc; + u32 temp_register; + u32 base; + u32 ID; + unsigned int devfn; + struct pci_resource *mem_node; + struct pci_resource *p_mem_node; + struct pci_resource *io_node; + struct pci_resource *bus_node; + struct pci_resource *hold_mem_node; + struct pci_resource *hold_p_mem_node; + struct pci_resource *hold_IO_node; + struct pci_resource *hold_bus_node; + struct irq_mapping irqs; + struct pci_func *new_slot; + struct pci_bus *pci_bus; + struct resource_lists temp_resources; + + pci_bus = ctrl->pci_bus; + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Check for Bridge */ + rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte); + if (rc) + return rc; + + if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ + /* set Primary bus */ + dbg("set Primary bus = %d\n", func->bus); + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus); + if (rc) + return rc; + + /* find range of busses to use */ + dbg("find ranges of buses to use\n"); + bus_node = get_max_resource(&(resources->bus_head), 1); + + /* If we don't have any busses to allocate, we can't continue */ + if (!bus_node) + return -ENOMEM; + + /* set Secondary bus */ + temp_byte = bus_node->base; + dbg("set Secondary bus = %d\n", bus_node->base); + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte); + if (rc) + return rc; + + /* set subordinate bus */ + temp_byte = bus_node->base + bus_node->length - 1; + dbg("set subordinate bus = %d\n", bus_node->base + bus_node->length - 1); + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); + if (rc) + return rc; + + /* set subordinate Latency Timer and base Latency Timer */ + temp_byte = 0x40; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte); + if (rc) + return rc; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte); + if (rc) + return rc; + + /* set Cache Line size */ + temp_byte = 0x08; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte); + if (rc) + return rc; + + /* Setup the IO, memory, and prefetchable windows */ + io_node = get_max_resource(&(resources->io_head), 0x1000); + if (!io_node) + return -ENOMEM; + mem_node = get_max_resource(&(resources->mem_head), 0x100000); + if (!mem_node) + return -ENOMEM; + p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000); + if (!p_mem_node) + return -ENOMEM; + dbg("Setup the IO, memory, and prefetchable windows\n"); + dbg("io_node\n"); + dbg("(base, len, next) (%x, %x, %p)\n", io_node->base, + io_node->length, io_node->next); + dbg("mem_node\n"); + dbg("(base, len, next) (%x, %x, %p)\n", mem_node->base, + mem_node->length, mem_node->next); + dbg("p_mem_node\n"); + dbg("(base, len, next) (%x, %x, %p)\n", p_mem_node->base, + p_mem_node->length, p_mem_node->next); + + /* set up the IRQ info */ + if (!resources->irqs) { + irqs.barber_pole = 0; + irqs.interrupt[0] = 0; + irqs.interrupt[1] = 0; + irqs.interrupt[2] = 0; + irqs.interrupt[3] = 0; + irqs.valid_INT = 0; + } else { + irqs.barber_pole = resources->irqs->barber_pole; + irqs.interrupt[0] = resources->irqs->interrupt[0]; + irqs.interrupt[1] = resources->irqs->interrupt[1]; + irqs.interrupt[2] = resources->irqs->interrupt[2]; + irqs.interrupt[3] = resources->irqs->interrupt[3]; + irqs.valid_INT = resources->irqs->valid_INT; + } + + /* set up resource lists that are now aligned on top and bottom + * for anything behind the bridge. */ + temp_resources.bus_head = bus_node; + temp_resources.io_head = io_node; + temp_resources.mem_head = mem_node; + temp_resources.p_mem_head = p_mem_node; + temp_resources.irqs = &irqs; + + /* Make copies of the nodes we are going to pass down so that + * if there is a problem,we can just use these to free resources */ + hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL); + hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL); + hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL); + hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL); + + if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) { + kfree(hold_bus_node); + kfree(hold_IO_node); + kfree(hold_mem_node); + kfree(hold_p_mem_node); + + return 1; + } + + memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource)); + + bus_node->base += 1; + bus_node->length -= 1; + bus_node->next = NULL; + + /* If we have IO resources copy them and fill in the bridge's + * IO range registers */ + if (io_node) { + memcpy(hold_IO_node, io_node, sizeof(struct pci_resource)); + io_node->next = NULL; + + /* set IO base and Limit registers */ + temp_byte = io_node->base >> 8; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte); + + temp_byte = (io_node->base + io_node->length - 1) >> 8; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); + } else { + kfree(hold_IO_node); + hold_IO_node = NULL; + } + + /* If we have memory resources copy them and fill in the + * bridge's memory range registers. Otherwise, fill in the + * range registers with values that disable them. */ + if (mem_node) { + memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource)); + mem_node->next = NULL; + + /* set Mem base and Limit registers */ + temp_word = mem_node->base >> 16; + rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); + + temp_word = (mem_node->base + mem_node->length - 1) >> 16; + rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + } else { + temp_word = 0xFFFF; + rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); + + temp_word = 0x0000; + rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + + kfree(hold_mem_node); + hold_mem_node = NULL; + } + + /* If we have prefetchable memory resources copy them and + * fill in the bridge's memory range registers. Otherwise, + * fill in the range registers with values that disable them. */ + if (p_mem_node) { + memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource)); + p_mem_node->next = NULL; + + /* set Pre Mem base and Limit registers */ + temp_word = p_mem_node->base >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); + + temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + } else { + temp_word = 0xFFFF; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); + + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + + kfree(hold_p_mem_node); + hold_p_mem_node = NULL; + } + + /* Adjust this to compensate for extra adjustment in first loop */ + irqs.barber_pole--; + + rc = 0; + + /* Here we actually find the devices and configure them */ + for (device = 0; (device <= 0x1F) && !rc; device++) { + irqs.barber_pole = (irqs.barber_pole + 1) & 0x03; + + ID = 0xFFFFFFFF; + pci_bus->number = hold_bus_node->base; + pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), 0x00, &ID); + pci_bus->number = func->bus; + + if (ID != 0xFFFFFFFF) { /* device present */ + /* Setup slot structure. */ + new_slot = cpqhp_slot_create(hold_bus_node->base); + + if (new_slot == NULL) { + rc = -ENOMEM; + continue; + } + + new_slot->bus = hold_bus_node->base; + new_slot->device = device; + new_slot->function = 0; + new_slot->is_a_board = 1; + new_slot->status = 0; + + rc = configure_new_device(ctrl, new_slot, 1, &temp_resources); + dbg("configure_new_device rc=0x%x\n",rc); + } /* End of IF (device in slot?) */ + } /* End of FOR loop */ + + if (rc) + goto free_and_out; + /* save the interrupt routing information */ + if (resources->irqs) { + resources->irqs->interrupt[0] = irqs.interrupt[0]; + resources->irqs->interrupt[1] = irqs.interrupt[1]; + resources->irqs->interrupt[2] = irqs.interrupt[2]; + resources->irqs->interrupt[3] = irqs.interrupt[3]; + resources->irqs->valid_INT = irqs.valid_INT; + } else if (!behind_bridge) { + /* We need to hook up the interrupts here */ + for (cloop = 0; cloop < 4; cloop++) { + if (irqs.valid_INT & (0x01 << cloop)) { + rc = cpqhp_set_irq(func->bus, func->device, + 0x0A + cloop, irqs.interrupt[cloop]); + if (rc) + goto free_and_out; + } + } /* end of for loop */ + } + /* Return unused bus resources + * First use the temporary node to store information for + * the board */ + if (hold_bus_node && bus_node && temp_resources.bus_head) { + hold_bus_node->length = bus_node->base - hold_bus_node->base; + + hold_bus_node->next = func->bus_head; + func->bus_head = hold_bus_node; + + temp_byte = temp_resources.bus_head->base - 1; + + /* set subordinate bus */ + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); + + if (temp_resources.bus_head->length == 0) { + kfree(temp_resources.bus_head); + temp_resources.bus_head = NULL; + } else { + return_resource(&(resources->bus_head), temp_resources.bus_head); + } + } + + /* If we have IO space available and there is some left, + * return the unused portion */ + if (hold_IO_node && temp_resources.io_head) { + io_node = do_pre_bridge_resource_split(&(temp_resources.io_head), + &hold_IO_node, 0x1000); + + /* Check if we were able to split something off */ + if (io_node) { + hold_IO_node->base = io_node->base + io_node->length; + + temp_byte = (hold_IO_node->base) >> 8; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_BASE, temp_byte); + + return_resource(&(resources->io_head), io_node); + } + + io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000); + + /* Check if we were able to split something off */ + if (io_node) { + /* First use the temporary node to store + * information for the board */ + hold_IO_node->length = io_node->base - hold_IO_node->base; + + /* If we used any, add it to the board's list */ + if (hold_IO_node->length) { + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + + temp_byte = (io_node->base - 1) >> 8; + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte); + + return_resource(&(resources->io_head), io_node); + } else { + /* it doesn't need any IO */ + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_LIMIT, temp_word); + + return_resource(&(resources->io_head), io_node); + kfree(hold_IO_node); + } + } else { + /* it used most of the range */ + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + } + } else if (hold_IO_node) { + /* it used the whole range */ + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + } + /* If we have memory space available and there is some left, + * return the unused portion */ + if (hold_mem_node && temp_resources.mem_head) { + mem_node = do_pre_bridge_resource_split(&(temp_resources. mem_head), + &hold_mem_node, 0x100000); + + /* Check if we were able to split something off */ + if (mem_node) { + hold_mem_node->base = mem_node->base + mem_node->length; + + temp_word = (hold_mem_node->base) >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word); + + return_resource(&(resources->mem_head), mem_node); + } + + mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000); + + /* Check if we were able to split something off */ + if (mem_node) { + /* First use the temporary node to store + * information for the board */ + hold_mem_node->length = mem_node->base - hold_mem_node->base; + + if (hold_mem_node->length) { + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + + /* configure end address */ + temp_word = (mem_node->base - 1) >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + + /* Return unused resources to the pool */ + return_resource(&(resources->mem_head), mem_node); + } else { + /* it doesn't need any Mem */ + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->mem_head), mem_node); + kfree(hold_mem_node); + } + } else { + /* it used most of the range */ + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + } + } else if (hold_mem_node) { + /* it used the whole range */ + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + } + /* If we have prefetchable memory space available and there + * is some left at the end, return the unused portion */ + if (hold_p_mem_node && temp_resources.p_mem_head) { + p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head), + &hold_p_mem_node, 0x100000); + + /* Check if we were able to split something off */ + if (p_mem_node) { + hold_p_mem_node->base = p_mem_node->base + p_mem_node->length; + + temp_word = (hold_p_mem_node->base) >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + } + + p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000); + + /* Check if we were able to split something off */ + if (p_mem_node) { + /* First use the temporary node to store + * information for the board */ + hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base; + + /* If we used any, add it to the board's list */ + if (hold_p_mem_node->length) { + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + + temp_word = (p_mem_node->base - 1) >> 16; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + } else { + /* it doesn't need any PMem */ + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + kfree(hold_p_mem_node); + } + } else { + /* it used the most of the range */ + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + } + } else if (hold_p_mem_node) { + /* it used the whole range */ + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + } + /* We should be configuring an IRQ and the bridge's base address + * registers if it needs them. Although we have never seen such + * a device */ + + /* enable card */ + command = 0x0157; /* = PCI_COMMAND_IO | + * PCI_COMMAND_MEMORY | + * PCI_COMMAND_MASTER | + * PCI_COMMAND_INVALIDATE | + * PCI_COMMAND_PARITY | + * PCI_COMMAND_SERR */ + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_COMMAND, command); + + /* set Bridge Control Register */ + command = 0x07; /* = PCI_BRIDGE_CTL_PARITY | + * PCI_BRIDGE_CTL_SERR | + * PCI_BRIDGE_CTL_NO_ISA */ + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_BRIDGE_CONTROL, command); + } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) { + /* Standard device */ + rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); + + if (class_code == PCI_BASE_CLASS_DISPLAY) { + /* Display (video) adapter (not supported) */ + return DEVICE_TYPE_NOT_SUPPORTED; + } + /* Figure out IO and memory needs */ + for (cloop = 0x10; cloop <= 0x24; cloop += 4) { + temp_register = 0xFFFFFFFF; + + dbg("CND: bus=%d, devfn=%d, offset=%d\n", pci_bus->number, devfn, cloop); + rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); + + rc = pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp_register); + dbg("CND: base = 0x%x\n", temp_register); + + if (temp_register) { /* If this register is implemented */ + if ((temp_register & 0x03L) == 0x01) { + /* Map IO */ + + /* set base = amount of IO space */ + base = temp_register & 0xFFFFFFFC; + base = ~base + 1; + + dbg("CND: length = 0x%x\n", base); + io_node = get_io_resource(&(resources->io_head), base); + dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n", + io_node->base, io_node->length, io_node->next); + dbg("func (%p) io_head (%p)\n", func, func->io_head); + + /* allocate the resource to the board */ + if (io_node) { + base = io_node->base; + + io_node->next = func->io_head; + func->io_head = io_node; + } else + return -ENOMEM; + } else if ((temp_register & 0x0BL) == 0x08) { + /* Map prefetchable memory */ + base = temp_register & 0xFFFFFFF0; + base = ~base + 1; + + dbg("CND: length = 0x%x\n", base); + p_mem_node = get_resource(&(resources->p_mem_head), base); + + /* allocate the resource to the board */ + if (p_mem_node) { + base = p_mem_node->base; + + p_mem_node->next = func->p_mem_head; + func->p_mem_head = p_mem_node; + } else + return -ENOMEM; + } else if ((temp_register & 0x0BL) == 0x00) { + /* Map memory */ + base = temp_register & 0xFFFFFFF0; + base = ~base + 1; + + dbg("CND: length = 0x%x\n", base); + mem_node = get_resource(&(resources->mem_head), base); + + /* allocate the resource to the board */ + if (mem_node) { + base = mem_node->base; + + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } else + return -ENOMEM; + } else if ((temp_register & 0x0BL) == 0x04) { + /* Map memory */ + base = temp_register & 0xFFFFFFF0; + base = ~base + 1; + + dbg("CND: length = 0x%x\n", base); + mem_node = get_resource(&(resources->mem_head), base); + + /* allocate the resource to the board */ + if (mem_node) { + base = mem_node->base; + + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } else + return -ENOMEM; + } else if ((temp_register & 0x0BL) == 0x06) { + /* Those bits are reserved, we can't handle this */ + return 1; + } else { + /* Requesting space below 1M */ + return NOT_ENOUGH_RESOURCES; + } + + rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base); + + /* Check for 64-bit base */ + if ((temp_register & 0x07L) == 0x04) { + cloop += 4; + + /* Upper 32 bits of address always zero + * on today's systems */ + /* FIXME this is probably not true on + * Alpha and ia64??? */ + base = 0; + rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base); + } + } + } /* End of base register loop */ + if (cpqhp_legacy_mode) { + /* Figure out which interrupt pin this function uses */ + rc = pci_bus_read_config_byte (pci_bus, devfn, + PCI_INTERRUPT_PIN, &temp_byte); + + /* If this function needs an interrupt and we are behind + * a bridge and the pin is tied to something that's + * alread mapped, set this one the same */ + if (temp_byte && resources->irqs && + (resources->irqs->valid_INT & + (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { + /* We have to share with something already set up */ + IRQ = resources->irqs->interrupt[(temp_byte + + resources->irqs->barber_pole - 1) & 0x03]; + } else { + /* Program IRQ based on card type */ + rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); + + if (class_code == PCI_BASE_CLASS_STORAGE) { + IRQ = cpqhp_disk_irq; + } else { + IRQ = cpqhp_nic_irq; + } + } + + /* IRQ Line */ + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ); + } + + if (!behind_bridge) { + rc = cpqhp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ); + if (rc) + return 1; + } else { + /* TBD - this code may also belong in the other clause + * of this If statement */ + resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ; + resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03; + } + + /* Latency Timer */ + temp_byte = 0x40; + rc = pci_bus_write_config_byte(pci_bus, devfn, + PCI_LATENCY_TIMER, temp_byte); + + /* Cache Line size */ + temp_byte = 0x08; + rc = pci_bus_write_config_byte(pci_bus, devfn, + PCI_CACHE_LINE_SIZE, temp_byte); + + /* disable ROM base Address */ + temp_dword = 0x00L; + rc = pci_bus_write_config_word(pci_bus, devfn, + PCI_ROM_ADDRESS, temp_dword); + + /* enable card */ + temp_word = 0x0157; /* = PCI_COMMAND_IO | + * PCI_COMMAND_MEMORY | + * PCI_COMMAND_MASTER | + * PCI_COMMAND_INVALIDATE | + * PCI_COMMAND_PARITY | + * PCI_COMMAND_SERR */ + rc = pci_bus_write_config_word (pci_bus, devfn, + PCI_COMMAND, temp_word); + } else { /* End of Not-A-Bridge else */ + /* It's some strange type of PCI adapter (Cardbus?) */ + return DEVICE_TYPE_NOT_SUPPORTED; + } + + func->configured = 1; + + return 0; +free_and_out: + cpqhp_destroy_resource_list (&temp_resources); + + return_resource(&(resources-> bus_head), hold_bus_node); + return_resource(&(resources-> io_head), hold_IO_node); + return_resource(&(resources-> mem_head), hold_mem_node); + return_resource(&(resources-> p_mem_head), hold_p_mem_node); + return rc; +} |