summaryrefslogtreecommitdiffstats
path: root/drivers/parport/parport_serial.c
diff options
context:
space:
mode:
authorEzequiel Garcia <ezequiel.garcia@free-electrons.com>2014-05-24 15:24:51 -0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-05-28 12:30:48 -0700
commitfeb5814254094c306429fe6d7b9c534fa0250f4c (patch)
tree038641e4554a574f315bdc5edb70e1d358d8279b /drivers/parport/parport_serial.c
parentc67f866dbb9b36593d0f6af177e99047ecebf95a (diff)
downloadop-kernel-dev-feb5814254094c306429fe6d7b9c534fa0250f4c.zip
op-kernel-dev-feb5814254094c306429fe6d7b9c534fa0250f4c.tar.gz
parport: Add support for the WCH353 1S/1P multi-IO card
This Multi-IO card has one serial 16550-like and one parallel port connector. Here's the lspci output, after this commit is applied: 03:07.0 Serial controller: Device 4348:5053 (rev 10) (prog-if 02 [16550]) Subsystem: Device 4348:5053 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at cf00 [size=8] Region 1: I/O ports at ce00 [size=8] Kernel driver in use: parport_serial Kernel modules: 8250_pci, parport_serial This commit adds an entry with the device ID to the blacklist declared in 8250_pci to prevent the driver from taking ownership. Also, and as was done for the 2S/1P variant, add a quirk to skip autodetection and set the correct type to 16550A clone. Proper entries are added to parport_serial, to support the device parallel and serial ports. Cc: Gianluca Anzolin <gianluca@sottospazio.it> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/parport/parport_serial.c')
-rw-r--r--drivers/parport/parport_serial.c9
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ff53314..ee93200 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
timedia_9079a,
timedia_9079b,
timedia_9079c,
+ wch_ch353_1s1p,
wch_ch353_2s1p,
sunix_2s1p,
};
@@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = {
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
@@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
/* WCH CARDS */
+ { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
/*
@@ -479,6 +482,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [wch_ch353_1s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[wch_ch353_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
OpenPOWER on IntegriCloud