summaryrefslogtreecommitdiffstats
path: root/drivers/parisc
diff options
context:
space:
mode:
authorHelge Deller <deller@gmx.de>2013-05-02 20:41:45 +0000
committerHelge Deller <deller@gmx.de>2013-05-06 23:08:32 +0200
commit6a45716abbf9dc0f397946306db1f78b2eba3086 (patch)
treeba6f1e47ff957dfc07e538d1d19dfc4615425cae /drivers/parisc
parent7f64fb41aad9a8504dd76e81b2391eae64e1498a (diff)
downloadop-kernel-dev-6a45716abbf9dc0f397946306db1f78b2eba3086.zip
op-kernel-dev-6a45716abbf9dc0f397946306db1f78b2eba3086.tar.gz
parisc: fix partly 16/64k PAGE_SIZE boot
This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the assembler PTE lookup code and the assembler TEMPALIAS code. Furthermore some data alignments for PAGE_SIZE have been limited to 4K (or less) to not waste too much memory with greater page sizes. As a side note, the palo loader can (currently) only handle up to 10 ELF segments which is fixed with tighter aligning as well. My testings indicated that the ldci command in the sba iommu coding needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page size was only set to 4K for my machine (C3000). All this fixes partly the boot, but there are still quite some caching problems left. Examples are e.g. the symbios logic driver which is failing: sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED. and the tulip network driver which doesn't seem to work correctly either: Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1 link partner capability of 05e1 ..... timed out! Beside those kernel fixes glibc will need fixes too to be able to handle >4K page sizes. Signed-off-by: Helge Deller <deller@gmx.de>
Diffstat (limited to 'drivers/parisc')
-rw-r--r--drivers/parisc/sba_iommu.c19
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 42cfcd9..1ff1b67 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -575,7 +575,7 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
mtsp(sid,1);
asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
- pa |= (ci >> 12) & 0xff; /* move CI (8 bits) into lowest byte */
+ pa |= (ci >> PAGE_SHIFT) & 0xff; /* move CI (8 bits) into lowest byte */
pa |= SBA_PDIR_VALID_BIT; /* set "valid" bit */
*pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */
@@ -1376,7 +1376,7 @@ static void
sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
u32 iova_space_size, iova_space_mask;
- unsigned int pdir_size, iov_order;
+ unsigned int pdir_size, iov_order, tcnfg;
/*
** Determine IOVA Space size from memory size.
@@ -1468,8 +1468,19 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
- /* Set I/O PDIR Page size to 4K */
- WRITE_REG(0, ioc->ioc_hpa+IOC_TCNFG);
+ /* Set I/O PDIR Page size to system page size */
+ switch (PAGE_SHIFT) {
+ case 12: tcnfg = 0; break; /* 4K */
+ case 13: tcnfg = 1; break; /* 8K */
+ case 14: tcnfg = 2; break; /* 16K */
+ case 16: tcnfg = 3; break; /* 64K */
+ default:
+ panic(__FILE__ "Unsupported system page size %d",
+ 1 << PAGE_SHIFT);
+ break;
+ }
+ /* Set I/O PDIR Page size to PAGE_SIZE (4k/16k/...) */
+ WRITE_REG(tcnfg, ioc->ioc_hpa+IOC_TCNFG);
/*
** Clear I/O TLB of any possible entries.
OpenPOWER on IntegriCloud