of: convert unittest overlay devicetree source to sugar syntax

The unittest-data overlays have been pulled into proper overlay
devicetree source files without changing their format.  The
next step is to convert them to use sugar syntax instead of
hand coding overlay fragments structure.

A few of the overlays can not be converted because they test
absolute target paths in the overlay fragment.  dtc does not
generate this type of target:
  overlay_0.dts
  overlay_1.dts
  overlay_12.dts
  overlay_13.dts

Two pre-existing unittest overlay devicetree source files are
also converted:
  overlay_bad_phandle.dts
  overlay_bad_symbol.dts

Signed-off-by: Frank Rowand <frank.rowand@sony.com>

15 files changed, 148 insertions, 233 deletions

diff --git a/drivers/of/unittest-data/overlay.dts b/drivers/of/unittest-data/overlay.dts
index ab5e89b..3bbc59e 100644
--- a/drivers/of/unittest-data/overlay.dts
+++ b/drivers/of/unittest-data/overlay.dts
@@ -2,76 +2,63 @@
 /dts-v1/;
 /plugin/;
 
-/ {
+&electric_1 {
 
-	fragment@0 {
-		target = <&electric_1>;
+	status = "okay";
 
-		__overlay__ {
-			status = "okay";
-
-			hvac_2: hvac-large-1 {
-				compatible = "ot,hvac-large";
-				heat-range = < 40 75 >;
-				cool-range = < 65 80 >;
-			};
-		};
+	hvac_2: hvac-large-1 {
+		compatible = "ot,hvac-large";
+		heat-range = < 40 75 >;
+		cool-range = < 65 80 >;
 	};
+};
 
-	fragment@1 {
-		target = <&rides_1>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "okay";
-
-			ride@100 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				track@30 {
-					incline-up = < 48 32 16 >;
-				};
+&rides_1 {
 
-				track@40 {
-					incline-up = < 47 31 15 >;
-				};
-			};
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "okay";
 
-			ride_200: ride@200 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "ot,ferris-wheel";
-				reg = < 0x00000200 0x100 >;
-				hvac-provider = < &hvac_2 >;
-				hvac-thermostat = < 27 32 > ;
-				hvac-zones = < 12 5 >;
-				hvac-zone-names = "operator", "snack-bar";
-				spin-controller = < &spin_ctrl_1 3 >;
-				spin-rph = < 30 >;
-				gondolas = < 16 >;
-				gondola-capacity = < 6 >;
+	ride@100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-				ride_200_left: track@10 {
-					reg = < 0x00000010 0x10 >;
-				};
+		track@30 {
+			incline-up = < 48 32 16 >;
+		};
 
-				ride_200_right: track@20 {
-					reg = < 0x00000020 0x10 >;
-				};
-			};
+		track@40 {
+			incline-up = < 47 31 15 >;
 		};
 	};
 
-	fragment@2 {
-		target = <&lights_2>;
+	ride_200: ride@200 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ot,ferris-wheel";
+		reg = < 0x00000200 0x100 >;
+		hvac-provider = < &hvac_2 >;
+		hvac-thermostat = < 27 32 > ;
+		hvac-zones = < 12 5 >;
+		hvac-zone-names = "operator", "snack-bar";
+		spin-controller = < &spin_ctrl_1 3 >;
+		spin-rph = < 30 >;
+		gondolas = < 16 >;
+		gondola-capacity = < 6 >;
+
+		ride_200_left: track@10 {
+			reg = < 0x00000010 0x10 >;
+		};
 
-		__overlay__ {
-			status = "okay";
-			color = "purple", "white", "red", "green";
-			rate = < 3 256 >;
+		ride_200_right: track@20 {
+			reg = < 0x00000020 0x10 >;
 		};
 	};
+};
+
+&lights_2 {
 
+	status = "okay";
+	color = "purple", "white", "red", "green";
+	rate = < 3 256 >;
 };
diff --git a/drivers/of/unittest-data/overlay_10.dts b/drivers/of/unittest-data/overlay_10.dts
index 445925a..73993bf 100644
--- a/drivers/of/unittest-data/overlay_10.dts
+++ b/drivers/of/unittest-data/overlay_10.dts
@@ -2,33 +2,26 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_10 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_10 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus";
-		__overlay__ {
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	test-unittest10 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <10>;
 
-			test-unittest10 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				test-unittest101 {
-					compatible = "unittest";
-					status = "okay";
-					reg = <1>;
-				};
-
-			};
+		test-unittest101 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
 		};
 	};
 };
diff --git a/drivers/of/unittest-data/overlay_11.dts b/drivers/of/unittest-data/overlay_11.dts
index c1d14f3..9a79b25 100644
--- a/drivers/of/unittest-data/overlay_11.dts
+++ b/drivers/of/unittest-data/overlay_11.dts
@@ -2,33 +2,27 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_11 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_11 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus";
-		__overlay__ {
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	test-unittest11 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <11>;
 
-			test-unittest11 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <11>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				test-unittest111 {
-					compatible = "unittest";
-					status = "okay";
-					reg = <1>;
-				};
-
-			};
+		test-unittest111 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
 		};
+
 	};
 };
diff --git a/drivers/of/unittest-data/overlay_15.dts b/drivers/of/unittest-data/overlay_15.dts
index 44e44c6..b98f251 100644
--- a/drivers/of/unittest-data/overlay_15.dts
+++ b/drivers/of/unittest-data/overlay_15.dts
@@ -2,33 +2,28 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_15 - mux overlay */
+/* overlay_15 - mux overlay */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus";
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			test-unittest15 {
-				reg = <11>;
-				compatible = "unittest-i2c-mux";
-				status = "okay";
+&unittest_i2c_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	test-unittest15 {
+		reg = <11>;
+		compatible = "unittest-i2c-mux";
+		status = "okay";
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-					test-mux-dev {
-						reg = <32>;
-						compatible = "unittest-i2c-dev";
-						status = "okay";
-					};
-				};
+			test-mux-dev {
+				reg = <32>;
+				compatible = "unittest-i2c-dev";
+				status = "okay";
 			};
 		};
 	};
diff --git a/drivers/of/unittest-data/overlay_2.dts b/drivers/of/unittest-data/overlay_2.dts
index cf1e424..db8684b 100644
--- a/drivers/of/unittest-data/overlay_2.dts
+++ b/drivers/of/unittest-data/overlay_2.dts
@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_2 -  enable using label */
+/* overlay_2 -  enable using label */
 
-	fragment@0 {
-		target = <&unittest2>;
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest2 {
+	status = "okay";
 };
diff --git a/drivers/of/unittest-data/overlay_3.dts b/drivers/of/unittest-data/overlay_3.dts
index 158dc44..40f289e 100644
--- a/drivers/of/unittest-data/overlay_3.dts
+++ b/drivers/of/unittest-data/overlay_3.dts
@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_3 - disable using label */
+/* overlay_3 - disable using label */
 
-	fragment@0 {
-		target = <&unittest3>;
-		__overlay__ {
-			status = "disabled";
-		};
-	};
+&unittest3 {
+	status = "disabled";
 };
diff --git a/drivers/of/unittest-data/overlay_4.dts b/drivers/of/unittest-data/overlay_4.dts
index b4a2e6c..a8a77dd 100644
--- a/drivers/of/unittest-data/overlay_4.dts
+++ b/drivers/of/unittest-data/overlay_4.dts
@@ -2,22 +2,17 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_4 - test insertion of a full node */
+/* overlay_4 - test insertion of a full node */
 
-	fragment@0 {
-		target = <&unittestbus>;
-		__overlay__ {
+&unittest_test_bus {
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			test-unittest4 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <4>;
-			};
-		};
+	test-unittest4 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <4>;
 	};
 };
diff --git a/drivers/of/unittest-data/overlay_5.dts b/drivers/of/unittest-data/overlay_5.dts
index 02ad25c..706f5f1 100644
--- a/drivers/of/unittest-data/overlay_5.dts
+++ b/drivers/of/unittest-data/overlay_5.dts
@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_5 - test overlay apply revert */
+/* overlay_5 - test overlay apply revert */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest5";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest5 {
+	status = "okay";
 };
diff --git a/drivers/of/unittest-data/overlay_6.dts b/drivers/of/unittest-data/overlay_6.dts
index a14e965..21a7fa4 100644
--- a/drivers/of/unittest-data/overlay_6.dts
+++ b/drivers/of/unittest-data/overlay_6.dts
@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_6 */
-	/* overlays 6, 7 application and removal in sequence */
+/* overlay_6 */
+/* overlays 6, 7 application and removal in sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest6";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest6 {
+	status = "okay";
 };
diff --git a/drivers/of/unittest-data/overlay_7.dts b/drivers/of/unittest-data/overlay_7.dts
index 4bd7e42..58ba1bb 100644
--- a/drivers/of/unittest-data/overlay_7.dts
+++ b/drivers/of/unittest-data/overlay_7.dts
@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_7 */
-	/* overlays 6, 7 application and removal in sequence */
+/* overlay_7 */
+/* overlays 6, 7 application and removal in sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest7";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest7 {
+	status = "okay";
 };
diff --git a/drivers/of/unittest-data/overlay_8.dts b/drivers/of/unittest-data/overlay_8.dts
index 5b21c53..e9718d1 100644
--- a/drivers/of/unittest-data/overlay_8.dts
+++ b/drivers/of/unittest-data/overlay_8.dts
@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_8 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_8 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest8";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest8 {
+	status = "okay";
 };
diff --git a/drivers/of/unittest-data/overlay_9.dts b/drivers/of/unittest-data/overlay_9.dts
index 20ff055..b35e23e 100644
--- a/drivers/of/unittest-data/overlay_9.dts
+++ b/drivers/of/unittest-data/overlay_9.dts
@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_9 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_9 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest8";
-		__overlay__ {
-			property-foo = "bar";
-		};
-	};
+&unittest8 {
+	property-foo = "bar";
 };
diff --git a/drivers/of/unittest-data/overlay_bad_phandle.dts b/drivers/of/unittest-data/overlay_bad_phandle.dts
index 4d5b997..83b7973 100644
--- a/drivers/of/unittest-data/overlay_bad_phandle.dts
+++ b/drivers/of/unittest-data/overlay_bad_phandle.dts
@@ -2,20 +2,13 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-
-	fragment@0 {
-		target = <&electric_1>;
-
-		__overlay__ {
-
-			// This label should cause an error when the overlay
-			// is applied.  There is already a phandle value
-			// in the base tree for motor-1.
-			spin_ctrl_1_conflict: motor-1 {
-				accelerate = < 3 >;
-				decelerate = < 5 >;
-			};
-		};
+&electric_1 {
+
+	// This label should cause an error when the overlay
+	// is applied.  There is already a phandle value
+	// in the base tree for motor-1.
+	spin_ctrl_1_conflict: motor-1 {
+		accelerate = < 3 >;
+		decelerate = < 5 >;
 	};
 };
diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dts b/drivers/of/unittest-data/overlay_bad_symbol.dts
index 135052e..98c6d1d 100644
--- a/drivers/of/unittest-data/overlay_bad_symbol.dts
+++ b/drivers/of/unittest-data/overlay_bad_symbol.dts
@@ -2,22 +2,15 @@
 /dts-v1/;
 /plugin/;
 
-/ {
+&electric_1 {
 
-	fragment@0 {
-		target = <&electric_1>;
-
-		__overlay__ {
-
-			// This label should cause an error when the overlay
-			// is applied.  There is already a symbol hvac_1
-			// in the base tree
-			hvac_1: hvac-medium-2 {
-				compatible = "ot,hvac-medium";
-				heat-range = < 50 75 >;
-				cool-range = < 60 80 >;
-			};
-
-		};
+	// This label should cause an error when the overlay
+	// is applied.  There is already a symbol hvac_1
+	// in the base tree
+	hvac_1: hvac-medium-2 {
+		compatible = "ot,hvac-medium";
+		heat-range = < 50 75 >;
+		cool-range = < 60 80 >;
 	};
+
 };
diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi
index fa2fb43..25cf397 100644
--- a/drivers/of/unittest-data/tests-overlay.dtsi
+++ b/drivers/of/unittest-data/tests-overlay.dtsi
@@ -5,7 +5,7 @@
 		overlay-node {
 
 			/* test bus */
-			unittestbus: test-bus {
+			unittest_test_bus: test-bus {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -70,7 +70,7 @@
 					reg = <8>;
 				};
 
-				i2c-test-bus {
+				unittest_i2c_test_bus: i2c-test-bus {
 					compatible = "unittest-i2c-bus";
 					status = "okay";
 					reg = <50>;