drivers/net: delete Racal Interlan ISA ni52 (i825xx) driver

Like the other drivers that were in the ISA i825xx family, the ni52
was rather rare, not widely used, and hence perhaps not as reliable
as the more mainstream ISA drivers that were heavily used.  Given
that, it is chosen for retirement at this time as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

5 files changed, 0 insertions, 1672 deletions

diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 726b17b..b69dac1 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -51,7 +51,6 @@ extern struct net_device *i82596_probe(int unit);
 extern struct net_device *ewrk3_probe(int unit);
 extern struct net_device *e2100_probe(int unit);
 extern struct net_device *ni5010_probe(int unit);
-extern struct net_device *ni52_probe(int unit);
 extern struct net_device *ni65_probe(int unit);
 extern struct net_device *sonic_probe(int unit);
 extern struct net_device *seeq8005_probe(int unit);
@@ -157,9 +156,6 @@ static struct devprobe2 isa_probes[] __initdata = {
 #ifdef CONFIG_NI5010
 	{ni5010_probe, 0},
 #endif
-#ifdef CONFIG_NI52
-	{ni52_probe, 0},
-#endif
 #ifdef CONFIG_NI65
 	{ni65_probe, 0},
 #endif
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index c3cfa57..955d929 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -52,17 +52,6 @@ config MVME16x_NET
 	  driver for this chip in your kernel.
 	  To compile this driver as a module, choose M here.
 
-config NI52
-	tristate "NI5210 support"
-	depends on ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni52.
-
 config SNI_82596
 	tristate "SNI RM ethernet"
 	depends on SNI_RM
diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile
index df9e2ec..8c8dcd2 100644
--- a/drivers/net/ethernet/i825xx/Makefile
+++ b/drivers/net/ethernet/i825xx/Makefile
@@ -3,7 +3,6 @@
 #
 
 obj-$(CONFIG_ARM_ETHER1) += ether1.o
-obj-$(CONFIG_NI52) += ni52.o
 obj-$(CONFIG_SUN3_82586) += sun3_82586.o
 obj-$(CONFIG_LASI_82596) += lasi_82596.o
 obj-$(CONFIG_SNI_82596) += sni_82596.o
diff --git a/drivers/net/ethernet/i825xx/ni52.c b/drivers/net/ethernet/i825xx/ni52.c
deleted file mode 100644
index 272976e..0000000
--- a/drivers/net/ethernet/i825xx/ni52.c
+++ /dev/null
@@ -1,1346 +0,0 @@
-/*
- * net-3-driver for the NI5210 card (i82586 Ethernet chip)
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same GNU General Public License that covers that work.
- *
- * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
- * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
- *    [feel free to mail ....]
- *
- * when using as module: (no autoprobing!)
- *   run with e.g:
- *       insmod ni52.o io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
- *
- * CAN YOU PLEASE REPORT ME YOUR PERFORMANCE EXPERIENCES !!.
- *
- * If you find a bug, please report me:
- *   The kernel panic output and any kmsg from the ni52 driver
- *   the ni5210-driver-version and the linux-kernel version
- *   how many shared memory (memsize) on the netcard,
- *   bootprom: yes/no, base_addr, mem_start
- *   maybe the ni5210-card revision and the i82586 version
- *
- * autoprobe for: base_addr: 0x300,0x280,0x360,0x320,0x340
- *                mem_start: 0xd0000,0xd2000,0xc8000,0xca000,0xd4000,0xd6000,
- *                           0xd8000,0xcc000,0xce000,0xda000,0xdc000
- *
- * sources:
- *   skeleton.c from Donald Becker
- *
- * I have also done a look in the following sources: (mail me if you need them)
- *   crynwr-packet-driver by Russ Nelson
- *   Garret A. Wollman's (fourth) i82586-driver for BSD
- *   (before getting an i82596 (yes 596 not 586) manual, the existing drivers
- *    helped me a lot to understand this tricky chip.)
- *
- * Known Problems:
- *   The internal sysbus seems to be slow. So we often lose packets because of
- *   overruns while receiving from a fast remote host.
- *   This can slow down TCP connections. Maybe the newer ni5210 cards are
- *   better. My experience is, that if a machine sends with more than about
- *   500-600K/s the fifo/sysbus overflows.
- *
- * IMPORTANT NOTE:
- *   On fast networks, it's a (very) good idea to have 16K shared memory. With
- *   8K, we can store only 4 receive frames, so it can (easily) happen that a
- *   remote machine 'overruns' our system.
- *
- * Known i82586/card problems (I'm sure, there are many more!):
- *   Running the NOP-mode, the i82586 sometimes seems to forget to report
- *   every xmit-interrupt until we restart the CU.
- *   Another MAJOR bug is, that the RU sometimes seems to ignore the EL-Bit
- *   in the RBD-Struct which indicates an end of the RBD queue.
- *   Instead, the RU fetches another (randomly selected and
- *   usually used) RBD and begins to fill it. (Maybe, this happens only if
- *   the last buffer from the previous RFD fits exact into the queue and
- *   the next RFD can't fetch an initial RBD. Anyone knows more? )
- *
- * results from ftp performance tests with Linux 1.2.5
- *   send and receive about 350-400 KByte/s (peak up to 460 kbytes/s)
- *   sending in NOP-mode: peak performance up to 530K/s (but better don't
- *   run this mode)
- */
-
-/*
- * 29.Sept.96: virt_to_bus changes for new memory scheme
- * 19.Feb.96: more Mcast changes, module support (MH)
- *
- * 18.Nov.95: Mcast changes (AC).
- *
- * 23.April.95: fixed(?) receiving problems by configuring a RFD more
- *              than the number of RBD's. Can maybe cause other problems.
- * 18.April.95: Added MODULE support (MH)
- * 17.April.95: MC related changes in init586() and set_multicast_list().
- *              removed use of 'jiffies' in init586() (MH)
- *
- * 19.Sep.94: Added Multicast support (not tested yet) (MH)
- *
- * 18.Sep.94: Workaround for 'EL-Bug'. Removed flexible RBD-handling.
- *            Now, every RFD has exact one RBD. (MH)
- *
- * 14.Sep.94: added promiscuous mode, a few cleanups (MH)
- *
- * 19.Aug.94: changed request_irq() parameter (MH)
- *
- * 20.July.94: removed cleanup bugs, removed a 16K-mem-probe-bug (MH)
- *
- * 19.July.94: lotsa cleanups .. (MH)
- *
- * 17.July.94: some patches ... verified to run with 1.1.29 (MH)
- *
- * 4.July.94: patches for Linux 1.1.24  (MH)
- *
- * 26.March.94: patches for Linux 1.0 and iomem-auto-probe (MH)
- *
- * 30.Sep.93: Added nop-chain .. driver now runs with only one Xmit-Buff,
- *				too (MH)
- *
- * < 30.Sep.93: first versions
- */
-
-static int debuglevel;	/* debug-printk 0: off 1: a few 2: more */
-static int automatic_resume; /* experimental .. better should be zero */
-static int rfdadd;	/* rfdadd=1 may be better for 8K MEM cards */
-static int fifo = 0x8;	/* don't change */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include "ni52.h"
-
-#define DRV_NAME "ni52"
-
-#define DEBUG       /* debug on */
-#define SYSBUSVAL 1 /* 8 Bit */
-
-#define ni_attn586()  { outb(0, dev->base_addr + NI52_ATTENTION); }
-#define ni_reset586() { outb(0, dev->base_addr + NI52_RESET); }
-#define ni_disint()   { outb(0, dev->base_addr + NI52_INTDIS); }
-#define ni_enaint()   { outb(0, dev->base_addr + NI52_INTENA); }
-
-#define make32(ptr16) ((void __iomem *)(p->memtop + (short) (ptr16)))
-#define make24(ptr32) ((char __iomem *)(ptr32)) - p->base
-#define make16(ptr32) ((unsigned short) ((char __iomem *)(ptr32)\
-					- p->memtop))
-
-/******************* how to calculate the buffers *****************************
-
-  * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
-  * --------------- in a different (more stable?) mode. Only in this mode it's
-  *                 possible to configure the driver with 'NO_NOPCOMMANDS'
-
-sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
-sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
-sizeof(rfd) = 24; sizeof(rbd) = 12;
-sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
-sizeof(nop_cmd) = 8;
-
-  * if you don't know the driver, better do not change these values: */
-
-#define RECV_BUFF_SIZE 1524 /* slightly oversized */
-#define XMIT_BUFF_SIZE 1524 /* slightly oversized */
-#define NUM_XMIT_BUFFS 1    /* config for both, 8K and 16K shmem */
-#define NUM_RECV_BUFFS_8  4 /* config for 8K shared mem */
-#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */
-#define NO_NOPCOMMANDS      /* only possible with NUM_XMIT_BUFFS=1 */
-
-/**************************************************************************/
-
-
-#define NI52_TOTAL_SIZE 16
-#define NI52_ADDR0 0x02
-#define NI52_ADDR1 0x07
-#define NI52_ADDR2 0x01
-
-static int     ni52_probe1(struct net_device *dev, int ioaddr);
-static irqreturn_t ni52_interrupt(int irq, void *dev_id);
-static int     ni52_open(struct net_device *dev);
-static int     ni52_close(struct net_device *dev);
-static netdev_tx_t ni52_send_packet(struct sk_buff *, struct net_device *);
-static struct  net_device_stats *ni52_get_stats(struct net_device *dev);
-static void    set_multicast_list(struct net_device *dev);
-static void    ni52_timeout(struct net_device *dev);
-
-/* helper-functions */
-static int     init586(struct net_device *dev);
-static int     check586(struct net_device *dev, unsigned size);
-static void    alloc586(struct net_device *dev);
-static void    startrecv586(struct net_device *dev);
-static void   __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr);
-static void    ni52_rcv_int(struct net_device *dev);
-static void    ni52_xmt_int(struct net_device *dev);
-static void    ni52_rnr_int(struct net_device *dev);
-
-struct priv {
-	char __iomem *base;
-	char __iomem *mapped;
-	char __iomem *memtop;
-	spinlock_t spinlock;
-	int reset;
-	struct rfd_struct __iomem *rfd_last, *rfd_top, *rfd_first;
-	struct scp_struct __iomem *scp;
-	struct iscp_struct __iomem *iscp;
-	struct scb_struct __iomem *scb;
-	struct tbd_struct __iomem *xmit_buffs[NUM_XMIT_BUFFS];
-#if (NUM_XMIT_BUFFS == 1)
-	struct transmit_cmd_struct __iomem *xmit_cmds[2];
-	struct nop_cmd_struct __iomem *nop_cmds[2];
-#else
-	struct transmit_cmd_struct __iomem *xmit_cmds[NUM_XMIT_BUFFS];
-	struct nop_cmd_struct __iomem *nop_cmds[NUM_XMIT_BUFFS];
-#endif
-	int nop_point, num_recv_buffs;
-	char __iomem *xmit_cbuffs[NUM_XMIT_BUFFS];
-	int xmit_count, xmit_last;
-};
-
-/* wait for command with timeout: */
-static void wait_for_scb_cmd(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-	int i;
-	for (i = 0; i < 16384; i++) {
-		if (readb(&p->scb->cmd_cuc) == 0)
-		      break;
-		udelay(4);
-		if (i == 16383) {
-			printk(KERN_ERR "%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",
-				dev->name, readb(&p->scb->cmd_cuc), readb(&p->scb->cus));
-			if (!p->reset) {
-				p->reset = 1;
-				ni_reset586();
-			}
-		}
-	}
-}
-
-static void wait_for_scb_cmd_ruc(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-	int i;
-	for (i = 0; i < 16384; i++) {
-		if (readb(&p->scb->cmd_ruc) == 0)
-			break;
-		udelay(4);
-		if (i == 16383) {
-			printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",
-				dev->name, readb(&p->scb->cmd_ruc),
-				readb(&p->scb->rus));
-			if (!p->reset) {
-				p->reset = 1;
-				ni_reset586();
-			}
-		}
-	}
-}
-
-static void wait_for_stat_compl(void __iomem *p)
-{
-	struct nop_cmd_struct __iomem *addr = p;
-	int i;
-	for (i = 0; i < 32767; i++) {
-		if (readw(&((addr)->cmd_status)) & STAT_COMPL)
-			break;
-		udelay(32);
-	}
-}
-
-/**********************************************
- * close device
- */
-static int ni52_close(struct net_device *dev)
-{
-	free_irq(dev->irq, dev);
-	ni_reset586(); /* the hard way to stop the receiver */
-	netif_stop_queue(dev);
-	return 0;
-}
-
-/**********************************************
- * open device
- */
-static int ni52_open(struct net_device *dev)
-{
-	int ret;
-
-	ni_disint();
-	alloc586(dev);
-	init586(dev);
-	startrecv586(dev);
-	ni_enaint();
-
-	ret = request_irq(dev->irq, ni52_interrupt, 0, dev->name, dev);
-	if (ret) {
-		ni_reset586();
-		return ret;
-	}
-	netif_start_queue(dev);
-	return 0; /* most done by init */
-}
-
-static int check_iscp(struct net_device *dev, void __iomem *addr)
-{
-	struct iscp_struct __iomem *iscp = addr;
-	struct priv *p = netdev_priv(dev);
-	memset_io(iscp, 0, sizeof(struct iscp_struct));
-
-	writel(make24(iscp), &p->scp->iscp);
-	writeb(1, &iscp->busy);
-
-	ni_reset586();
-	ni_attn586();
-	mdelay(32);	/* wait a while... */
-	/* i82586 clears 'busy' after successful init */
-	if (readb(&iscp->busy))
-		return 0;
-	return 1;
-}
-
-/**********************************************
- * Check to see if there's an 82586 out there.
- */
-static int check586(struct net_device *dev, unsigned size)
-{
-	struct priv *p = netdev_priv(dev);
-	int i;
-
-	p->mapped = ioremap(dev->mem_start, size);
-	if (!p->mapped)
-		return 0;
-
-	p->base = p->mapped + size - 0x01000000;
-	p->memtop = p->mapped + size;
-	p->scp = (struct scp_struct __iomem *)(p->base + SCP_DEFAULT_ADDRESS);
-	p->scb	= (struct scb_struct __iomem *)	p->mapped;
-	p->iscp = (struct iscp_struct __iomem *)p->scp - 1;
-	memset_io(p->scp, 0, sizeof(struct scp_struct));
-	for (i = 0; i < sizeof(struct scp_struct); i++)
-		/* memory was writeable? */
-		if (readb((char __iomem *)p->scp + i))
-			goto Enodev;
-	writeb(SYSBUSVAL, &p->scp->sysbus);	/* 1 = 8Bit-Bus, 0 = 16 Bit */
-	if (readb(&p->scp->sysbus) != SYSBUSVAL)
-		goto Enodev;
-
-	if (!check_iscp(dev, p->mapped))
-		goto Enodev;
-	if (!check_iscp(dev, p->iscp))
-		goto Enodev;
-	return 1;
-Enodev:
-	iounmap(p->mapped);
-	return 0;
-}
-
-/******************************************************************
- * set iscp at the right place, called by ni52_probe1 and open586.
- */
-static void alloc586(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-
-	ni_reset586();
-	mdelay(32);
-
-	memset_io(p->iscp, 0, sizeof(struct iscp_struct));
-	memset_io(p->scp , 0, sizeof(struct scp_struct));
-
-	writel(make24(p->iscp), &p->scp->iscp);
-	writeb(SYSBUSVAL, &p->scp->sysbus);
-	writew(make16(p->scb), &p->iscp->scb_offset);
-
-	writeb(1, &p->iscp->busy);
-	ni_reset586();
-	ni_attn586();
-
-	mdelay(32);
-
-	if (readb(&p->iscp->busy))
-		printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
-
-	p->reset = 0;
-
-	memset_io(p->scb, 0, sizeof(struct scb_struct));
-}
-
-/* set: io,irq,memstart,memend or set it when calling insmod */
-static int irq = 9;
-static int io = 0x300;
-static long memstart;	/* e.g 0xd0000 */
-static long memend;	/* e.g 0xd4000 */
-
-/**********************************************
- * probe the ni5210-card
- */
-struct net_device * __init ni52_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct priv));
-	static const int ports[] = {0x300, 0x280, 0x360, 0x320, 0x340, 0};
-	const int *port;
-	struct priv *p;
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	p = netdev_priv(dev);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-		io = dev->base_addr;
-		irq = dev->irq;
-		memstart = dev->mem_start;
-		memend = dev->mem_end;
-	}
-
-	if (io > 0x1ff)	{	/* Check a single specified location. */
-		err = ni52_probe1(dev, io);
-	} else if (io > 0) {		/* Don't probe at all. */
-		err = -ENXIO;
-	} else {
-		for (port = ports; *port && ni52_probe1(dev, *port) ; port++)
-			;
-		if (*port)
-			goto got_it;
-#ifdef FULL_IO_PROBE
-		for (io = 0x200; io < 0x400 && ni52_probe1(dev, io); io += 8)
-			;
-		if (io < 0x400)
-			goto got_it;
-#endif
-		err = -ENODEV;
-	}
-	if (err)
-		goto out;
-got_it:
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return dev;
-out1:
-	iounmap(p->mapped);
-	release_region(dev->base_addr, NI52_TOTAL_SIZE);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static const struct net_device_ops ni52_netdev_ops = {
-	.ndo_open		= ni52_open,
-	.ndo_stop		= ni52_close,
-	.ndo_get_stats		= ni52_get_stats,
-	.ndo_tx_timeout 	= ni52_timeout,
-	.ndo_start_xmit 	= ni52_send_packet,
-	.ndo_set_rx_mode	= set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static int __init ni52_probe1(struct net_device *dev, int ioaddr)
-{
-	int i, size, retval;
-	struct priv *priv = netdev_priv(dev);
-
-	dev->base_addr = ioaddr;
-	dev->irq = irq;
-	dev->mem_start = memstart;
-	dev->mem_end = memend;
-
-	spin_lock_init(&priv->spinlock);
-
-	if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME))
-		return -EBUSY;
-
-	if (!(inb(ioaddr+NI52_MAGIC1) == NI52_MAGICVAL1) ||
-	    !(inb(ioaddr+NI52_MAGIC2) == NI52_MAGICVAL2)) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	for (i = 0; i < ETH_ALEN; i++)
-		dev->dev_addr[i] = inb(dev->base_addr+i);
-
-	if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1 ||
-	    dev->dev_addr[2] != NI52_ADDR2) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	printk(KERN_INFO "%s: NI5210 found at %#3lx, ",
-				dev->name, dev->base_addr);
-
-	/*
-	 * check (or search) IO-Memory, 8K and 16K
-	 */
-#ifdef MODULE
-	size = dev->mem_end - dev->mem_start;
-	if (size != 0x2000 && size != 0x4000) {
-		printk("\n");
-		printk(KERN_ERR "%s: Invalid memory size %d. Allowed is 0x2000 or 0x4000 bytes.\n", dev->name, size);
-		retval = -ENODEV;
-		goto out;
-	}
-	if (!check586(dev, size)) {
-		printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size);
-		retval = -ENODEV;
-		goto out;
-	}
-#else
-	if (dev->mem_start != 0) {
-		/* no auto-mem-probe */
-		size = 0x4000; /* check for 16K mem */
-		if (!check586(dev, size)) {
-			size = 0x2000; /* check for 8K mem */
-			if (!check586(dev, size)) {
-				printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start);
-				retval = -ENODEV;
-				goto out;
-			}
-		}
-	} else {
-		static const unsigned long memaddrs[] = {
-			0xc8000, 0xca000, 0xcc000, 0xce000, 0xd0000, 0xd2000,
-			0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0
-		};
-		for (i = 0;; i++) {
-			if (!memaddrs[i]) {
-				printk(KERN_ERR "?memprobe, Can't find io-memory!\n");
-				retval = -ENODEV;
-				goto out;
-			}
-			dev->mem_start = memaddrs[i];
-			size = 0x2000; /* check for 8K mem */
-			if (check586(dev, size))
-				/* 8K-check */
-				break;
-			size = 0x4000; /* check for 16K mem */
-			if (check586(dev, size))
-				/* 16K-check */
-				break;
-		}
-	}
-	/* set mem_end showed by 'ifconfig' */
-	dev->mem_end = dev->mem_start + size;
-#endif
-
-	alloc586(dev);
-
-	/* set number of receive-buffs according to memsize */
-	if (size == 0x2000)
-		priv->num_recv_buffs = NUM_RECV_BUFFS_8;
-	else
-		priv->num_recv_buffs = NUM_RECV_BUFFS_16;
-
-	printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ",
-				dev->mem_start, size);
-
-	if (dev->irq < 2) {
-		unsigned long irq_mask;
-
-		irq_mask = probe_irq_on();
-		ni_reset586();
-		ni_attn586();
-
-		mdelay(20);
-		dev->irq = probe_irq_off(irq_mask);
-		if (!dev->irq) {
-			printk("?autoirq, Failed to detect IRQ line!\n");
-			retval = -EAGAIN;
-			iounmap(priv->mapped);
-			goto out;
-		}
-		printk("IRQ %d (autodetected).\n", dev->irq);
-	} else {
-		if (dev->irq == 2)
-			dev->irq = 9;
-		printk("IRQ %d (assigned and not checked!).\n", dev->irq);
-	}
-
-	dev->netdev_ops		= &ni52_netdev_ops;
-	dev->watchdog_timeo	= HZ/20;
-
-	return 0;
-out:
-	release_region(ioaddr, NI52_TOTAL_SIZE);
-	return retval;
-}
-
-/**********************************************
- * init the chip (ni52-interrupt should be disabled?!)
- * needs a correct 'allocated' memory
- */
-
-static int init586(struct net_device *dev)
-{
-	void __iomem *ptr;
-	int i, result = 0;
-	struct priv *p = netdev_priv(dev);
-	struct configure_cmd_struct __iomem *cfg_cmd;
-	struct iasetup_cmd_struct __iomem *ias_cmd;
-	struct tdr_cmd_struct __iomem *tdr_cmd;
-	struct mcsetup_cmd_struct __iomem *mc_cmd;
-	struct netdev_hw_addr *ha;
-	int num_addrs = netdev_mc_count(dev);
-
-	ptr = p->scb + 1;
-
-	cfg_cmd = ptr; /* configure-command */
-	writew(0, &cfg_cmd->cmd_status);
-	writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd);
-	writew(0xFFFF, &cfg_cmd->cmd_link);
-
-	/* number of cfg bytes */
-	writeb(0x0a, &cfg_cmd->byte_cnt);
-	/* fifo-limit (8=tx:32/rx:64) */
-	writeb(fifo, &cfg_cmd->fifo);
-	/* hold or discard bad recv frames (bit 7) */
-	writeb(0x40, &cfg_cmd->sav_bf);
-	/* addr_len |!src_insert |pre-len |loopback */
-	writeb(0x2e, &cfg_cmd->adr_len);
-	writeb(0x00, &cfg_cmd->priority);
-	writeb(0x60, &cfg_cmd->ifs);
-	writeb(0x00, &cfg_cmd->time_low);
-	writeb(0xf2, &cfg_cmd->time_high);
-	writeb(0x00, &cfg_cmd->promisc);
-	if (dev->flags & IFF_ALLMULTI) {
-		int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6;
-		if (num_addrs > len) {
-			printk(KERN_ERR "%s: switching to promisc. mode\n",
-				dev->name);
-			writeb(0x01, &cfg_cmd->promisc);
-		}
-	}
-	if (dev->flags & IFF_PROMISC)
-		writeb(0x01, &cfg_cmd->promisc);
-	writeb(0x00, &cfg_cmd->carr_coll);
-	writew(make16(cfg_cmd), &p->scb->cbl_offset);
-	writeb(0, &p->scb->cmd_ruc);
-
-	writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
-	ni_attn586();
-
-	wait_for_stat_compl(cfg_cmd);
-
-	if ((readw(&cfg_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
-							(STAT_COMPL|STAT_OK)) {
-		printk(KERN_ERR "%s: configure command failed: %x\n",
-				dev->name, readw(&cfg_cmd->cmd_status));
-		return 1;
-	}
-
-	/*
-	 * individual address setup
-	 */
-
-	ias_cmd = ptr;
-
-	writew(0, &ias_cmd->cmd_status);
-	writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd);
-	writew(0xffff, &ias_cmd->cmd_link);
-
-	memcpy_toio(&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN);
-
-	writew(make16(ias_cmd), &p->scb->cbl_offset);
-
-	writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
-	ni_attn586();
-
-	wait_for_stat_compl(ias_cmd);
-
-	if ((readw(&ias_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
-							(STAT_OK|STAT_COMPL)) {
-		printk(KERN_ERR "%s (ni52): individual address setup command failed: %04x\n", dev->name, readw(&ias_cmd->cmd_status));
-		return 1;
-	}
-
-	/*
-	 * TDR, wire check .. e.g. no resistor e.t.c
-	 */
-
-	tdr_cmd = ptr;
-
-	writew(0, &tdr_cmd->cmd_status);
-	writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd);
-	writew(0xffff, &tdr_cmd->cmd_link);
-	writew(0, &tdr_cmd->status);
-
-	writew(make16(tdr_cmd), &p->scb->cbl_offset);
-	writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
-	ni_attn586();
-
-	wait_for_stat_compl(tdr_cmd);
-
-	if (!(readw(&tdr_cmd->cmd_status) & STAT_COMPL))
-		printk(KERN_ERR "%s: Problems while running the TDR.\n",
-				dev->name);
-	else {
-		udelay(16);
-		result = readw(&tdr_cmd->status);
-		writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
-		ni_attn586(); /* ack the interrupts */
-
-		if (result & TDR_LNK_OK)
-			;
-		else if (result & TDR_XCVR_PRB)
-			printk(KERN_ERR "%s: TDR: Transceiver problem. Check the cable(s)!\n",
-				dev->name);
-		else if (result & TDR_ET_OPN)
-			printk(KERN_ERR "%s: TDR: No correct termination %d clocks away.\n",
-				dev->name, result & TDR_TIMEMASK);
-		else if (result & TDR_ET_SRT) {
-			/* time == 0 -> strange :-) */
-			if (result & TDR_TIMEMASK)
-				printk(KERN_ERR "%s: TDR: Detected a short circuit %d clocks away.\n",
-					dev->name, result & TDR_TIMEMASK);
-		} else
-			printk(KERN_ERR "%s: TDR: Unknown status %04x\n",
-						dev->name, result);
-	}
-
-	/*
-	 * Multicast setup
-	 */
-	if (num_addrs && !(dev->flags & IFF_PROMISC)) {
-		mc_cmd = ptr;
-		writew(0, &mc_cmd->cmd_status);
-		writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd);
-		writew(0xffff, &mc_cmd->cmd_link);
-		writew(num_addrs * 6, &mc_cmd->mc_cnt);
-
-		i = 0;
-		netdev_for_each_mc_addr(ha, dev)
-			memcpy_toio(mc_cmd->mc_list[i++], ha->addr, 6);
-
-		writew(make16(mc_cmd), &p->scb->cbl_offset);
-		writeb(CUC_START, &p->scb->cmd_cuc);
-		ni_attn586();
-
-		wait_for_stat_compl(mc_cmd);
-
-		if ((readw(&mc_cmd->cmd_status) & (STAT_COMPL|STAT_OK))
-						 != (STAT_COMPL|STAT_OK))
-			printk(KERN_ERR "%s: Can't apply multicast-address-list.\n", dev->name);
-	}
-
-	/*
-	 * alloc nop/xmit-cmds
-	 */
-#if (NUM_XMIT_BUFFS == 1)
-	for (i = 0; i < 2; i++) {
-		p->nop_cmds[i] = ptr;
-		writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
-		writew(0, &p->nop_cmds[i]->cmd_status);
-		writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
-		ptr = ptr + sizeof(struct nop_cmd_struct);
-	}
-#else
-	for (i = 0; i < NUM_XMIT_BUFFS; i++) {
-		p->nop_cmds[i] = ptr;
-		writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
-		writew(0, &p->nop_cmds[i]->cmd_status);
-		writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
-		ptr = ptr + sizeof(struct nop_cmd_struct);
-	}
-#endif
-
-	ptr = alloc_rfa(dev, ptr); /* init receive-frame-area */
-
-	/*
-	 * alloc xmit-buffs / init xmit_cmds
-	 */
-	for (i = 0; i < NUM_XMIT_BUFFS; i++) {
-		/* Transmit cmd/buff 0 */
-		p->xmit_cmds[i] = ptr;
-		ptr = ptr + sizeof(struct transmit_cmd_struct);
-		p->xmit_cbuffs[i] = ptr; /* char-buffs */
-		ptr = ptr + XMIT_BUFF_SIZE;
-		p->xmit_buffs[i] = ptr; /* TBD */
-		ptr = ptr + sizeof(struct tbd_struct);
-		if ((void __iomem *)ptr > (void __iomem *)p->iscp) {
-			printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n",
-				dev->name);
-			return 1;
-		}
-		memset_io(p->xmit_cmds[i], 0,
-					sizeof(struct transmit_cmd_struct));
-		memset_io(p->xmit_buffs[i], 0,
-					sizeof(struct tbd_struct));
-		writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]),
-					&p->xmit_cmds[i]->cmd_link);
-		writew(STAT_COMPL, &p->xmit_cmds[i]->cmd_status);
-		writew(CMD_XMIT|CMD_INT, &p->xmit_cmds[i]->cmd_cmd);
-		writew(make16(p->xmit_buffs[i]), &p->xmit_cmds[i]->tbd_offset);
-		writew(0xffff, &p->xmit_buffs[i]->next);
-		writel(make24(p->xmit_cbuffs[i]), &p->xmit_buffs[i]->buffer);
-	}
-
-	p->xmit_count = 0;
-	p->xmit_last	= 0;
-#ifndef NO_NOPCOMMANDS
-	p->nop_point	= 0;
-#endif
-
-	 /*
-		* 'start transmitter'
-		*/
-#ifndef NO_NOPCOMMANDS
-	writew(make16(p->nop_cmds[0]), &p->scb->cbl_offset);
-	writeb(CUC_START, &p->scb->cmd_cuc);
-	ni_attn586();
-	wait_for_scb_cmd(dev);
-#else
-	writew(make16(p->xmit_cmds[0]), &p->xmit_cmds[0]->cmd_link);
-	writew(CMD_XMIT | CMD_SUSPEND | CMD_INT, &p->xmit_cmds[0]->cmd_cmd);
-#endif
-
-	/*
-	 * ack. interrupts
-	 */
-	writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
-	ni_attn586();
-	udelay(16);
-
-	ni_enaint();
-
-	return 0;
-}
-
-/******************************************************
- * This is a helper routine for ni52_rnr_int() and init586().
- * It sets up the Receive Frame Area (RFA).
- */
-
-static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr)
-{
-	struct rfd_struct __iomem *rfd = ptr;
-	struct rbd_struct __iomem *rbd;
-	int i;
-	struct priv *p = netdev_priv(dev);
-
-	memset_io(rfd, 0,
-		sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd));
-	p->rfd_first = rfd;
-
-	for (i = 0; i < (p->num_recv_buffs + rfdadd); i++) {
-		writew(make16(rfd + (i+1) % (p->num_recv_buffs+rfdadd)),
-			&rfd[i].next);
-		writew(0xffff, &rfd[i].rbd_offset);
-	}
-	/* RU suspend */
-	writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last);
-
-	ptr = rfd + (p->num_recv_buffs + rfdadd);
-
-	rbd = ptr;
-	ptr = rbd + p->num_recv_buffs;
-
-	 /* clr descriptors */
-	memset_io(rbd, 0, sizeof(struct rbd_struct) * (p->num_recv_buffs));
-
-	for (i = 0; i < p->num_recv_buffs; i++) {
-		writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next);
-		writew(RECV_BUFF_SIZE, &rbd[i].size);
-		writel(make24(ptr), &rbd[i].buffer);
-		ptr = ptr + RECV_BUFF_SIZE;
-	}
-	p->rfd_top	= p->rfd_first;
-	p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd);
-
-	writew(make16(p->rfd_first), &p->scb->rfa_offset);
-	writew(make16(rbd), &p->rfd_first->rbd_offset);
-
-	return ptr;
-}
-
-
-/**************************************************
- * Interrupt Handler ...
- */
-
-static irqreturn_t ni52_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	unsigned int stat;
-	int cnt = 0;
-	struct priv *p;
-
-	p = netdev_priv(dev);
-
-	if (debuglevel > 1)
-		printk("I");
-
-	spin_lock(&p->spinlock);
-
-	wait_for_scb_cmd(dev); /* wait for last command	*/
-
-	while ((stat = readb(&p->scb->cus) & STAT_MASK)) {
-		writeb(stat, &p->scb->cmd_cuc);
-		ni_attn586();
-
-		if (stat & STAT_FR)	 /* received a frame */
-			ni52_rcv_int(dev);
-
-		if (stat & STAT_RNR) { /* RU went 'not ready' */
-			printk("(R)");
-			if (readb(&p->scb->rus) & RU_SUSPEND) {
-				/* special case: RU_SUSPEND */
-				wait_for_scb_cmd(dev);
-				writeb(RUC_RESUME, &p->scb->cmd_ruc);
-				ni_attn586();
-				wait_for_scb_cmd_ruc(dev);
-			} else {
-				printk(KERN_ERR "%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",
-					dev->name, stat, readb(&p->scb->rus));
-				ni52_rnr_int(dev);
-			}
-		}
-
-		/* Command with I-bit set complete */
-		if (stat & STAT_CX)
-			 ni52_xmt_int(dev);
-
-#ifndef NO_NOPCOMMANDS
-		if (stat & STAT_CNA) {	/* CU went 'not ready' */
-			if (netif_running(dev))
-				printk(KERN_ERR "%s: oops! CU has left active state. stat: %04x/%02x.\n",
-					dev->name, stat, readb(&p->scb->cus));
-		}
-#endif
-
-		if (debuglevel > 1)
-			printk("%d", cnt++);
-
-		/* Wait for ack. (ni52_xmt_int can be faster than ack!!) */
-		wait_for_scb_cmd(dev);
-		if (readb(&p->scb->cmd_cuc)) {	 /* timed out? */
-			printk(KERN_ERR "%s: Acknowledge timed out.\n",
-				dev->name);
-			ni_disint();
-			break;
-		}
-	}
-	spin_unlock(&p->spinlock);
-
-	if (debuglevel > 1)
-		printk("i");
-	return IRQ_HANDLED;
-}
-
-/*******************************************************
- * receive-interrupt
- */
-
-static void ni52_rcv_int(struct net_device *dev)
-{
-	int status, cnt = 0;
-	unsigned short totlen;
-	struct sk_buff *skb;
-	struct rbd_struct __iomem *rbd;
-	struct priv *p = netdev_priv(dev);
-
-	if (debuglevel > 0)
-		printk("R");
-
-	for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) {
-		rbd = make32(readw(&p->rfd_top->rbd_offset));
-		if (status & RFD_OK) { /* frame received without error? */
-			totlen = readw(&rbd->status);
-			if (totlen & RBD_LAST) {
-				/* the first and the last buffer? */
-				totlen &= RBD_MASK; /* length of this frame */
-				writew(0x00, &rbd->status);
-				skb = netdev_alloc_skb(dev, totlen + 2);
-				if (skb != NULL) {
-					skb_reserve(skb, 2);
-					skb_put(skb, totlen);
-					memcpy_fromio(skb->data, p->base + readl(&rbd->buffer), totlen);
-					skb->protocol = eth_type_trans(skb, dev);
-					netif_rx(skb);
-					dev->stats.rx_packets++;
-					dev->stats.rx_bytes += totlen;
-				} else
-					dev->stats.rx_dropped++;
-			} else {
-				int rstat;
-				 /* free all RBD's until RBD_LAST is set */
-				totlen = 0;
-				while (!((rstat = readw(&rbd->status)) & RBD_LAST)) {
-					totlen += rstat & RBD_MASK;
-					if (!rstat) {
-						printk(KERN_ERR "%s: Whoops .. no end mark in RBD list\n", dev->name);
-						break;
-					}
-					writew(0, &rbd->status);
-					rbd = make32(readw(&rbd->next));
-				}
-				totlen += rstat & RBD_MASK;
-				writew(0, &rbd->status);
-				printk(KERN_ERR "%s: received oversized frame! length: %d\n",
-					dev->name, totlen);
-				dev->stats.rx_dropped++;
-			 }
-		} else {/* frame !(ok), only with 'save-bad-frames' */
-			printk(KERN_ERR "%s: oops! rfd-error-status: %04x\n",
-				dev->name, status);
-			dev->stats.rx_errors++;
-		}
-		writeb(0, &p->rfd_top->stat_high);
-		writeb(RFD_SUSP, &p->rfd_top->last); /* maybe exchange by RFD_LAST */
-		writew(0xffff, &p->rfd_top->rbd_offset);
-		writeb(0, &p->rfd_last->last);	/* delete RFD_SUSP	*/
-		p->rfd_last = p->rfd_top;
-		p->rfd_top = make32(readw(&p->rfd_top->next)); /* step to next RFD */
-		writew(make16(p->rfd_top), &p->scb->rfa_offset);
-
-		if (debuglevel > 0)
-			printk("%d", cnt++);
-	}
-
-	if (automatic_resume) {
-		wait_for_scb_cmd(dev);
-		writeb(RUC_RESUME, &p->scb->cmd_ruc);
-		ni_attn586();
-		wait_for_scb_cmd_ruc(dev);
-	}
-
-#ifdef WAIT_4_BUSY
-	{
-		int i;
-		for (i = 0; i < 1024; i++) {
-			if (p->rfd_top->status)
-				break;
-			udelay(16);
-			if (i == 1023)
-				printk(KERN_ERR "%s: RU hasn't fetched next RFD (not busy/complete)\n", dev->name);
-		}
-	}
-#endif
-	if (debuglevel > 0)
-		printk("r");
-}
-
-/**********************************************************
- * handle 'Receiver went not ready'.
- */
-
-static void ni52_rnr_int(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-
-	dev->stats.rx_errors++;
-
-	wait_for_scb_cmd(dev);		/* wait for the last cmd, WAIT_4_FULLSTAT?? */
-	writeb(RUC_ABORT, &p->scb->cmd_ruc); /* usually the RU is in the 'no resource'-state .. abort it now. */
-	ni_attn586();
-	wait_for_scb_cmd_ruc(dev);		/* wait for accept cmd. */
-
-	alloc_rfa(dev, p->rfd_first);
-	/* maybe add a check here, before restarting the RU */
-	startrecv586(dev); /* restart RU */
-
-	printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n",
-		dev->name, readb(&p->scb->rus));
-
-}
-
-/**********************************************************
- * handle xmit - interrupt
- */
-
-static void ni52_xmt_int(struct net_device *dev)
-{
-	int status;
-	struct priv *p = netdev_priv(dev);
-
-	if (debuglevel > 0)
-		printk("X");
-
-	status = readw(&p->xmit_cmds[p->xmit_last]->cmd_status);
-	if (!(status & STAT_COMPL))
-		printk(KERN_ERR "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
-
-	if (status & STAT_OK) {
-		dev->stats.tx_packets++;
-		dev->stats.collisions += (status & TCMD_MAXCOLLMASK);
-	} else {
-		dev->stats.tx_errors++;
-		if (status & TCMD_LATECOLL) {
-			printk(KERN_ERR "%s: late collision detected.\n",
-				dev->name);
-			dev->stats.collisions++;
-		} else if (status & TCMD_NOCARRIER) {
-			dev->stats.tx_carrier_errors++;
-			printk(KERN_ERR "%s: no carrier detected.\n",
-				dev->name);
-		} else if (status & TCMD_LOSTCTS)
-			printk(KERN_ERR "%s: loss of CTS detected.\n",
-				dev->name);
-		else if (status & TCMD_UNDERRUN) {
-			dev->stats.tx_fifo_errors++;
-			printk(KERN_ERR "%s: DMA underrun detected.\n",
-				dev->name);
-		} else if (status & TCMD_MAXCOLL) {
-			printk(KERN_ERR "%s: Max. collisions exceeded.\n",
-				dev->name);
-			dev->stats.collisions += 16;
-		}
-	}
-#if (NUM_XMIT_BUFFS > 1)
-	if ((++p->xmit_last) == NUM_XMIT_BUFFS)
-		p->xmit_last = 0;
-#endif
-	netif_wake_queue(dev);
-}
-
-/***********************************************************
- * (re)start the receiver
- */
-
-static void startrecv586(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-
-	wait_for_scb_cmd(dev);
-	wait_for_scb_cmd_ruc(dev);
-	writew(make16(p->rfd_first), &p->scb->rfa_offset);
-	writeb(RUC_START, &p->scb->cmd_ruc);
-	ni_attn586();		/* start cmd. */
-	wait_for_scb_cmd_ruc(dev);
-	/* wait for accept cmd. (no timeout!!) */
-}
-
-static void ni52_timeout(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-#ifndef NO_NOPCOMMANDS
-	if (readb(&p->scb->cus) & CU_ACTIVE) { /* COMMAND-UNIT active? */
-		netif_wake_queue(dev);
-#ifdef DEBUG
-		printk(KERN_ERR "%s: strange ... timeout with CU active?!?\n",
-			dev->name);
-		printk(KERN_ERR "%s: X0: %04x N0: %04x N1: %04x %d\n",
-			dev->name, (int)p->xmit_cmds[0]->cmd_status,
-			readw(&p->nop_cmds[0]->cmd_status),
-			readw(&p->nop_cmds[1]->cmd_status),
-			p->nop_point);
-#endif
-		writeb(CUC_ABORT, &p->scb->cmd_cuc);
-		ni_attn586();
-		wait_for_scb_cmd(dev);
-		writew(make16(p->nop_cmds[p->nop_point]), &p->scb->cbl_offset);
-		writeb(CUC_START, &p->scb->cmd_cuc);
-		ni_attn586();
-		wait_for_scb_cmd(dev);
-		dev->trans_start = jiffies; /* prevent tx timeout */
-		return 0;
-	}
-#endif
-	{
-#ifdef DEBUG
-		printk(KERN_ERR "%s: xmitter timed out, try to restart! stat: %02x\n",
-				dev->name, readb(&p->scb->cus));
-		printk(KERN_ERR "%s: command-stats: %04x %04x\n",
-				dev->name,
-				readw(&p->xmit_cmds[0]->cmd_status),
-				readw(&p->xmit_cmds[1]->cmd_status));
-		printk(KERN_ERR "%s: check, whether you set the right interrupt number!\n",
-				dev->name);
-#endif
-		ni52_close(dev);
-		ni52_open(dev);
-	}
-	dev->trans_start = jiffies; /* prevent tx timeout */
-}
-
-/******************************************************
- * send frame
- */
-
-static netdev_tx_t ni52_send_packet(struct sk_buff *skb,
-				    struct net_device *dev)
-{
-	int len, i;
-#ifndef NO_NOPCOMMANDS
-	int next_nop;
-#endif
-	struct priv *p = netdev_priv(dev);
-
-	if (skb->len > XMIT_BUFF_SIZE) {
-		printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len);
-		return NETDEV_TX_OK;
-	}
-
-	netif_stop_queue(dev);
-
-	memcpy_toio(p->xmit_cbuffs[p->xmit_count], skb->data, skb->len);
-	len = skb->len;
-	if (len < ETH_ZLEN) {
-		len = ETH_ZLEN;
-		memset_io(p->xmit_cbuffs[p->xmit_count]+skb->len, 0,
-							len - skb->len);
-	}
-
-#if (NUM_XMIT_BUFFS == 1)
-#	ifdef NO_NOPCOMMANDS
-
-#ifdef DEBUG
-	if (readb(&p->scb->cus) & CU_ACTIVE) {
-		printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name);
-		printk(KERN_ERR "%s: stat: %04x %04x\n",
-				dev->name, readb(&p->scb->cus),
-				readw(&p->xmit_cmds[0]->cmd_status));
-	}
-#endif
-	writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
-	for (i = 0; i < 16; i++) {
-		writew(0, &p->xmit_cmds[0]->cmd_status);
-		wait_for_scb_cmd(dev);
-		if ((readb(&p->scb->cus) & CU_STATUS) == CU_SUSPEND)
-			writeb(CUC_RESUME, &p->scb->cmd_cuc);
-		else {
-			writew(make16(p->xmit_cmds[0]), &p->scb->cbl_offset);
-			writeb(CUC_START, &p->scb->cmd_cuc);
-		}
-		ni_attn586();
-		if (!i)
-			dev_kfree_skb(skb);
-		wait_for_scb_cmd(dev);
-		/* test it, because CU sometimes doesn't start immediately */
-		if (readb(&p->scb->cus) & CU_ACTIVE)
-			break;
-		if (readw(&p->xmit_cmds[0]->cmd_status))
-			break;
-		if (i == 15)
-			printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
-	}
-#	else
-	next_nop = (p->nop_point + 1) & 0x1;
-	writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
-	writew(make16(p->nop_cmds[next_nop]), &p->xmit_cmds[0]->cmd_link);
-	writew(make16(p->nop_cmds[next_nop]),
-				&p->nop_cmds[next_nop]->cmd_link);
-	writew(0, &p->xmit_cmds[0]->cmd_status);
-	writew(0, &p->nop_cmds[next_nop]->cmd_status);
-
-	writew(make16(p->xmit_cmds[0]), &p->nop_cmds[p->nop_point]->cmd_link);
-	p->nop_point = next_nop;
-	dev_kfree_skb(skb);
-#	endif
-#else
-	writew(TBD_LAST | len, &p->xmit_buffs[p->xmit_count]->size);
-	next_nop = p->xmit_count + 1
-	if (next_nop == NUM_XMIT_BUFFS)
-		next_nop = 0;
-	writew(0, &p->xmit_cmds[p->xmit_count]->cmd_status);
-	/* linkpointer of xmit-command already points to next nop cmd */
-	writew(make16(p->nop_cmds[next_nop]),
-				&p->nop_cmds[next_nop]->cmd_link);
-	writew(0, &p->nop_cmds[next_nop]->cmd_status);
-	writew(make16(p->xmit_cmds[p->xmit_count]),
-				&p->nop_cmds[p->xmit_count]->cmd_link);
-	p->xmit_count = next_nop;
-	{
-		unsigned long flags;
-		spin_lock_irqsave(&p->spinlock);
-		if (p->xmit_count != p->xmit_last)
-			netif_wake_queue(dev);
-		spin_unlock_irqrestore(&p->spinlock);
-	}
-	dev_kfree_skb(skb);
-#endif
-	return NETDEV_TX_OK;
-}
-
-/*******************************************
- * Someone wanna have the statistics
- */
-
-static struct net_device_stats *ni52_get_stats(struct net_device *dev)
-{
-	struct priv *p = netdev_priv(dev);
-	unsigned short crc, aln, rsc, ovrn;
-
-	/* Get error-statistics from the ni82586 */
-	crc = readw(&p->scb->crc_errs);
-	writew(0, &p->scb->crc_errs);
-	aln = readw(&p->scb->aln_errs);
-	writew(0, &p->scb->aln_errs);
-	rsc = readw(&p->scb->rsc_errs);
-	writew(0, &p->scb->rsc_errs);
-	ovrn = readw(&p->scb->ovrn_errs);
-	writew(0, &p->scb->ovrn_errs);
-
-	dev->stats.rx_crc_errors += crc;
-	dev->stats.rx_fifo_errors += ovrn;
-	dev->stats.rx_frame_errors += aln;
-	dev->stats.rx_dropped += rsc;
-
-	return &dev->stats;
-}
-
-/********************************************************
- * Set MC list ..
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-	ni_disint();
-	alloc586(dev);
-	init586(dev);
-	startrecv586(dev);
-	ni_enaint();
-	netif_wake_queue(dev);
-}
-
-#ifdef MODULE
-static struct net_device *dev_ni52;
-
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(memstart, long, 0);
-module_param(memend, long, 0);
-MODULE_PARM_DESC(io, "NI5210 I/O base address,required");
-MODULE_PARM_DESC(irq, "NI5210 IRQ number,required");
-MODULE_PARM_DESC(memstart, "NI5210 memory base address,required");
-MODULE_PARM_DESC(memend, "NI5210 memory end address,required");
-
-int __init init_module(void)
-{
-	if (io <= 0x0 || !memend || !memstart || irq < 2) {
-		printk(KERN_ERR "ni52: Autoprobing not allowed for modules.\n");
-		printk(KERN_ERR "ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n");
-		return -ENODEV;
-	}
-	dev_ni52 = ni52_probe(-1);
-	if (IS_ERR(dev_ni52))
-		return PTR_ERR(dev_ni52);
-	return 0;
-}
-
-void __exit cleanup_module(void)
-{
-	struct priv *p = netdev_priv(dev_ni52);
-	unregister_netdev(dev_ni52);
-	iounmap(p->mapped);
-	release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE);
-	free_netdev(dev_ni52);
-}
-#endif /* MODULE */
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h
deleted file mode 100644
index 0a03b28..0000000
--- a/drivers/net/ethernet/i825xx/ni52.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel i82586 Ethernet definitions
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same GNU General Public License that covers that work.
- *
- * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
- *
- * I have done a look in the following sources:
- *   crynwr-packet-driver by Russ Nelson
- *   Garret A. Wollman's i82586-driver for BSD
- */
-
-
-#define NI52_RESET     0  /* writing to this address, resets the i82586 */
-#define NI52_ATTENTION 1  /* channel attention, kick the 586 */
-#define NI52_TENA      3  /* 2-5 possibly wrong, Xmit enable */
-#define NI52_TDIS      2  /* Xmit disable */
-#define NI52_INTENA    5  /* Interrupt enable */
-#define NI52_INTDIS    4  /* Interrupt disable */
-#define NI52_MAGIC1    6  /* dunno exact function */
-#define NI52_MAGIC2    7  /* dunno exact function */
-
-#define NI52_MAGICVAL1 0x00  /* magic-values for ni5210 card */
-#define NI52_MAGICVAL2 0x55
-
-/*
- * where to find the System Configuration Pointer (SCP)
- */
-#define SCP_DEFAULT_ADDRESS 0xfffff4
-
-
-/*
- * System Configuration Pointer Struct
- */
-
-struct scp_struct
-{
-	u16 zero_dum0;	/* has to be zero */
-	u8 sysbus;	/* 0=16Bit,1=8Bit */
-	u8 zero_dum1;	/* has to be zero for 586 */
-	u16 zero_dum2;
-	u16 zero_dum3;
-	u32 iscp;		/* pointer to the iscp-block */
-};
-
-
-/*
- * Intermediate System Configuration Pointer (ISCP)
- */
-struct iscp_struct
-{
-	u8 busy;          /* 586 clears after successful init */
-	u8 zero_dummy;    /* has to be zero */
-	u16 scb_offset;    /* pointeroffset to the scb_base */
-	u32 scb_base;      /* base-address of all 16-bit offsets */
-};
-
-/*
- * System Control Block (SCB)
- */
-struct scb_struct
-{
-	u8 rus;
-	u8 cus;
-	u8 cmd_ruc;        /* command word: RU part */
-	u8 cmd_cuc;        /* command word: CU part & ACK */
-	u16 cbl_offset;    /* pointeroffset, command block list */
-	u16 rfa_offset;    /* pointeroffset, receive frame area */
-	u16 crc_errs;      /* CRC-Error counter */
-	u16 aln_errs;      /* alignmenterror counter */
-	u16 rsc_errs;      /* Resourceerror counter */
-	u16 ovrn_errs;     /* OVerrunerror counter */
-};
-
-/*
- * possible command values for the command word
- */
-#define RUC_MASK	0x0070	/* mask for RU commands */
-#define RUC_NOP		0x0000	/* NOP-command */
-#define RUC_START	0x0010	/* start RU */
-#define RUC_RESUME	0x0020	/* resume RU after suspend */
-#define RUC_SUSPEND	0x0030	/* suspend RU */
-#define RUC_ABORT	0x0040	/* abort receiver operation immediately */
-
-#define CUC_MASK        0x07  /* mask for CU command */
-#define CUC_NOP         0x00  /* NOP-command */
-#define CUC_START       0x01  /* start execution of 1. cmd on the CBL */
-#define CUC_RESUME      0x02  /* resume after suspend */
-#define CUC_SUSPEND     0x03  /* Suspend CU */
-#define CUC_ABORT       0x04  /* abort command operation immediately */
-
-#define ACK_MASK        0xf0  /* mask for ACK command */
-#define ACK_CX          0x80  /* acknowledges STAT_CX */
-#define ACK_FR          0x40  /* ack. STAT_FR */
-#define ACK_CNA         0x20  /* ack. STAT_CNA */
-#define ACK_RNR         0x10  /* ack. STAT_RNR */
-
-/*
- * possible status values for the status word
- */
-#define STAT_MASK       0xf0  /* mask for cause of interrupt */
-#define STAT_CX         0x80  /* CU finished cmd with its I bit set */
-#define STAT_FR         0x40  /* RU finished receiving a frame */
-#define STAT_CNA        0x20  /* CU left active state */
-#define STAT_RNR        0x10  /* RU left ready state */
-
-#define CU_STATUS       0x7   /* CU status, 0=idle */
-#define CU_SUSPEND      0x1   /* CU is suspended */
-#define CU_ACTIVE       0x2   /* CU is active */
-
-#define RU_STATUS	0x70	/* RU status, 0=idle */
-#define RU_SUSPEND	0x10	/* RU suspended */
-#define RU_NOSPACE	0x20	/* RU no resources */
-#define RU_READY	0x40	/* RU is ready */
-
-/*
- * Receive Frame Descriptor (RFD)
- */
-struct rfd_struct
-{
-	u8  stat_low;	/* status word */
-	u8  stat_high;	/* status word */
-	u8  rfd_sf;	/* 82596 mode only */
-	u8  last;		/* Bit15,Last Frame on List / Bit14,suspend */
-	u16 next;		/* linkoffset to next RFD */
-	u16 rbd_offset;	/* pointeroffset to RBD-buffer */
-	u8  dest[6];	/* ethernet-address, destination */
-	u8  source[6];	/* ethernet-address, source */
-	u16 length;	/* 802.3 frame-length */
-	u16 zero_dummy;	/* dummy */
-};
-
-#define RFD_LAST     0x80	/* last: last rfd in the list */
-#define RFD_SUSP     0x40	/* last: suspend RU after  */
-#define RFD_COMPL    0x80
-#define RFD_OK       0x20
-#define RFD_BUSY     0x40
-#define RFD_ERR_LEN  0x10     /* Length error (if enabled length-checking */
-#define RFD_ERR_CRC  0x08     /* CRC error */
-#define RFD_ERR_ALGN 0x04     /* Alignment error */
-#define RFD_ERR_RNR  0x02     /* status: receiver out of resources */
-#define RFD_ERR_OVR  0x01     /* DMA Overrun! */
-
-#define RFD_ERR_FTS  0x0080	/* Frame to short */
-#define RFD_ERR_NEOP 0x0040	/* No EOP flag (for bitstuffing only) */
-#define RFD_ERR_TRUN 0x0020	/* (82596 only/SF mode) indicates truncated frame */
-#define RFD_MATCHADD 0x0002     /* status: Destinationaddress !matches IA (only 82596) */
-#define RFD_COLLDET  0x0001	/* Detected collision during reception */
-
-/*
- * Receive Buffer Descriptor (RBD)
- */
-struct rbd_struct
-{
-	u16 status;	/* status word,number of used bytes in buff */
-	u16 next;		/* pointeroffset to next RBD */
-	u32 buffer;	/* receive buffer address pointer */
-	u16 size;		/* size of this buffer */
-	u16 zero_dummy;    /* dummy */
-};
-
-#define RBD_LAST	0x8000	/* last buffer */
-#define RBD_USED	0x4000	/* this buffer has data */
-#define RBD_MASK	0x3fff	/* size-mask for length */
-
-/*
- * Statusvalues for Commands/RFD
- */
-#define STAT_COMPL   0x8000	/* status: frame/command is complete */
-#define STAT_BUSY    0x4000	/* status: frame/command is busy */
-#define STAT_OK      0x2000	/* status: frame/command is ok */
-
-/*
- * Action-Commands
- */
-#define CMD_NOP		0x0000	/* NOP */
-#define CMD_IASETUP	0x0001	/* initial address setup command */
-#define CMD_CONFIGURE	0x0002	/* configure command */
-#define CMD_MCSETUP	0x0003	/* MC setup command */
-#define CMD_XMIT	0x0004	/* transmit command */
-#define CMD_TDR		0x0005	/* time domain reflectometer (TDR) command */
-#define CMD_DUMP	0x0006	/* dump command */
-#define CMD_DIAGNOSE	0x0007	/* diagnose command */
-
-/*
- * Action command bits
- */
-#define CMD_LAST	0x8000	/* indicates last command in the CBL */
-#define CMD_SUSPEND	0x4000	/* suspend CU after this CB */
-#define CMD_INT		0x2000	/* generate interrupt after execution */
-
-/*
- * NOP - command
- */
-struct nop_cmd_struct
-{
-	u16 cmd_status;	/* status of this command */
-	u16 cmd_cmd;       /* the command itself (+bits) */
-	u16 cmd_link;      /* offsetpointer to next command */
-};
-
-/*
- * IA Setup command
- */
-struct iasetup_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u8  iaddr[6];
-};
-
-/*
- * Configure command
- */
-struct configure_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u8  byte_cnt;   /* size of the config-cmd */
-	u8  fifo;       /* fifo/recv monitor */
-	u8  sav_bf;     /* save bad frames (bit7=1)*/
-	u8  adr_len;    /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
-	u8  priority;   /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
-	u8  ifs;        /* inter frame spacing */
-	u8  time_low;   /* slot time low */
-	u8  time_high;  /* slot time high(0-2) and max. retries(4-7) */
-	u8  promisc;    /* promisc-mode(0) , et al (1-7) */
-	u8  carr_coll;  /* carrier(0-3)/collision(4-7) stuff */
-	u8  fram_len;   /* minimal frame len */
-	u8  dummy;	     /* dummy */
-};
-
-/*
- * Multicast Setup command
- */
-struct mcsetup_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 mc_cnt;		/* number of bytes in the MC-List */
-	u8  mc_list[0][6];  	/* pointer to 6 bytes entries */
-};
-
-/*
- * DUMP command
- */
-struct dump_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 dump_offset;    /* pointeroffset to DUMP space */
-};
-
-/*
- * transmit command
- */
-struct transmit_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 tbd_offset;	/* pointeroffset to TBD */
-	u8  dest[6];       /* destination address of the frame */
-	u16 length;	/* user defined: 802.3 length / Ether type */
-};
-
-#define TCMD_ERRMASK     0x0fa0
-#define TCMD_MAXCOLLMASK 0x000f
-#define TCMD_MAXCOLL     0x0020
-#define TCMD_HEARTBEAT   0x0040
-#define TCMD_DEFERRED    0x0080
-#define TCMD_UNDERRUN    0x0100
-#define TCMD_LOSTCTS     0x0200
-#define TCMD_NOCARRIER   0x0400
-#define TCMD_LATECOLL    0x0800
-
-struct tdr_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 status;
-};
-
-#define TDR_LNK_OK	0x8000	/* No link problem identified */
-#define TDR_XCVR_PRB	0x4000	/* indicates a transceiver problem */
-#define TDR_ET_OPN	0x2000	/* open, no correct termination */
-#define TDR_ET_SRT	0x1000	/* TDR detected a short circuit */
-#define TDR_TIMEMASK	0x07ff	/* mask for the time field */
-
-/*
- * Transmit Buffer Descriptor (TBD)
- */
-struct tbd_struct
-{
-	u16 size;		/* size + EOF-Flag(15) */
-	u16 next;          /* pointeroffset to next TBD */
-	u32 buffer;        /* pointer to buffer */
-};
-
-#define TBD_LAST 0x8000         /* EOF-Flag, indicates last buffer in list */
-
-
-
-