summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorWill Deacon <will.deacon@arm.com>2012-04-12 05:54:09 +0000
committerDavid S. Miller <davem@davemloft.net>2012-04-13 14:07:51 -0400
commit3c5e979bd037888dd7d722da22da4b43659af485 (patch)
treee99ee38a97475131747820deddf3ff749821160c /drivers/net
parent51c61a2838c33dab7b6659b9a3e008bb1b40bc9b (diff)
downloadop-kernel-dev-3c5e979bd037888dd7d722da22da4b43659af485.zip
op-kernel-dev-3c5e979bd037888dd7d722da22da4b43659af485.tar.gz
net: smsc911x: fix skb handling in receive path
The SMSC911x driver resets the ->head, ->data and ->tail pointers in the skb on the reset path in order to avoid buffer overflow due to packet padding performed by the hardware. This patch fixes the receive path so that the skb pointers are fixed up after the data has been read from the device, The error path is also fixed to use number of words consistently and prevent erroneous FIFO fastforwarding when skipping over bad data. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c14
1 files changed, 5 insertions, 9 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 4a69710..5aa2dbe 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1166,10 +1166,8 @@ smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
/* Quickly dumps bad packets */
static void
-smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes)
+smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
{
- unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2;
-
if (likely(pktwords >= 4)) {
unsigned int timeout = 500;
unsigned int val;
@@ -1233,7 +1231,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
continue;
}
- skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN);
+ skb = netdev_alloc_skb(dev, pktwords << 2);
if (unlikely(!skb)) {
SMSC_WARN(pdata, rx_err,
"Unable to allocate skb for rx packet");
@@ -1243,14 +1241,12 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
break;
}
- skb->data = skb->head;
- skb_reset_tail_pointer(skb);
+ pdata->ops->rx_readfifo(pdata,
+ (unsigned int *)skb->data, pktwords);
/* Align IP on 16B boundary */
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, pktlength - 4);
- pdata->ops->rx_readfifo(pdata,
- (unsigned int *)skb->head, pktwords);
skb->protocol = eth_type_trans(skb, dev);
skb_checksum_none_assert(skb);
netif_receive_skb(skb);
@@ -1565,7 +1561,7 @@ static int smsc911x_open(struct net_device *dev)
smsc911x_reg_write(pdata, FIFO_INT, temp);
/* set RX Data offset to 2 bytes for alignment */
- smsc911x_reg_write(pdata, RX_CFG, (2 << 8));
+ smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
/* enable NAPI polling before enabling RX interrupts */
napi_enable(&pdata->napi);
OpenPOWER on IntegriCloud