summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2005-04-21 17:06:20 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2005-04-21 17:06:20 -0700
commit7d0c41ef89dad9008edf1c3c0022721ebad39999 (patch)
tree2da17c83458f8a84f99d05ea201bc71e8f2155fe /drivers/net
parent85e94cedc44d1c2c1663b5b18f703ca5e7316e59 (diff)
downloadop-kernel-dev-7d0c41ef89dad9008edf1c3c0022721ebad39999.zip
op-kernel-dev-7d0c41ef89dad9008edf1c3c0022721ebad39999.tar.gz
[TG3]: Split tg3_phy_probe into 2 functions
Split the 1st half of tg3_phy_probe() into tg3_get_eeprom_hw_cfg() so that the TG3_FLAG_EEPROM_WRITE_PROT can be determined before calling tg3_set_power_state() in tg3_get_invariants(). This will allow tg3_set_power_state() to drive the GPIOs correctly based on the config. information in eeprom. On the 5752, there are no pull-up resistors on the GPIO pins and it is necessary to drive the unused GPIOs as output. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/tg3.c56
1 files changed, 39 insertions, 17 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f22f19b..dd036c0 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7542,21 +7542,27 @@ static inline struct subsys_tbl_ent *lookup_by_subsys(struct tg3 *tp)
return NULL;
}
-static int __devinit tg3_phy_probe(struct tg3 *tp)
+/* Since this function may be called in D3-hot power state during
+ * tg3_init_one(), only config cycles are allowed.
+ */
+static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
{
- u32 eeprom_phy_id, hw_phy_id_1, hw_phy_id_2;
- u32 hw_phy_id, hw_phy_id_masked;
u32 val;
- int eeprom_signature_found, eeprom_phy_serdes, err;
+
+ /* Make sure register accesses (indirect or otherwise)
+ * will function correctly.
+ */
+ pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
+ tp->misc_host_ctrl);
tp->phy_id = PHY_ID_INVALID;
- eeprom_phy_id = PHY_ID_INVALID;
- eeprom_phy_serdes = 0;
- eeprom_signature_found = 0;
+ tp->led_ctrl = LED_CTRL_MODE_PHY_1;
+
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
u32 nic_cfg, led_cfg;
- u32 nic_phy_id, ver, cfg2 = 0;
+ u32 nic_phy_id, ver, cfg2 = 0, eeprom_phy_id;
+ int eeprom_phy_serdes = 0;
tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
tp->nic_sram_data_cfg = nic_cfg;
@@ -7569,8 +7575,6 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
(ver > 0) && (ver < 0x100))
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2);
- eeprom_signature_found = 1;
-
if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) ==
NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER)
eeprom_phy_serdes = 1;
@@ -7586,6 +7590,10 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
} else
eeprom_phy_id = 0;
+ tp->phy_id = eeprom_phy_id;
+ if (eeprom_phy_serdes)
+ tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
SHASTA_EXT_LED_MODE_MASK);
@@ -7653,6 +7661,13 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
if (cfg2 & (1 << 18))
tp->tg3_flags2 |= TG3_FLG2_SERDES_PREEMPHASIS;
}
+}
+
+static int __devinit tg3_phy_probe(struct tg3 *tp)
+{
+ u32 hw_phy_id_1, hw_phy_id_2;
+ u32 hw_phy_id, hw_phy_id_masked;
+ int err;
/* Reading the PHY ID register can conflict with ASF
* firwmare access to the PHY hardware.
@@ -7681,10 +7696,10 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
if (hw_phy_id_masked == PHY_ID_BCM8002)
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
} else {
- if (eeprom_signature_found) {
- tp->phy_id = eeprom_phy_id;
- if (eeprom_phy_serdes)
- tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+ if (tp->phy_id != PHY_ID_INVALID) {
+ /* Do nothing, phy ID already set up in
+ * tg3_get_eeprom_hw_cfg().
+ */
} else {
struct subsys_tbl_ent *p;
@@ -7755,9 +7770,6 @@ skip_phy_reset:
err = tg3_init_5401phy_dsp(tp);
}
- if (!eeprom_signature_found)
- tp->led_ctrl = LED_CTRL_MODE_PHY_1;
-
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
tp->link_config.advertising =
(ADVERTISED_1000baseT_Half |
@@ -8023,6 +8035,16 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
}
+ /* Get eeprom hw config before calling tg3_set_power_state().
+ * In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
+ * determined before calling tg3_set_power_state() so that
+ * we know whether or not to switch out of Vaux power.
+ * When the flag is set, it means that GPIO1 is used for eeprom
+ * write protect and also implies that it is a LOM where GPIOs
+ * are not used to switch power.
+ */
+ tg3_get_eeprom_hw_cfg(tp);
+
/* Force the chip into D0. */
err = tg3_set_power_state(tp, 0);
if (err) {
OpenPOWER on IntegriCloud