Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

39 files changed, 54 insertions, 54 deletions

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 6a858a2..a6cd335 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1415,12 +1415,12 @@ struct bnx2x_func_init_params {
 		else
 
 /* skip rx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
  */
 #define skip_rx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
 /* skip tx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
  */
 #define skip_tx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 84e1af4..8cdcf5b3 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -5037,7 +5037,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
 		memset(&ilt, 0, sizeof(struct bnx2x_ilt));
 
-		/* initalize dummy TM client */
+		/* initialize dummy TM client */
 		ilt_cli.start = 0;
 		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
 		ilt_cli.client_num = ILT_CLIENT_TM;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 38ef7ca..c939683 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1633,7 +1633,7 @@
    (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
 #define MISC_REG_SW_TIMER_RELOAD_VAL_4				 0xa2fc
 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
-   in this register. addres 0 - timer 1; address 1 - timer 2, ...  address 7 -
+   in this register. address 0 - timer 1; address 1 - timer 2, ...  address 7 -
    timer 8 */
 #define MISC_REG_SW_TIMER_VAL					 0xa5c0
 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 48cf24f..171782e 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port)
 	lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
 
 	memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-	/* Note: source addres is set to be the member's PERMANENT address,
+	/* Note: source address is set to be the member's PERMANENT address,
 	   because we use it to identify loopback lacpdus in receive. */
 	memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
 	lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -881,7 +881,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
 	marker_header = (struct bond_marker_header *)skb_put(skb, length);
 
 	memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-	/* Note: source addres is set to be the member's PERMANENT address,
+	/* Note: source address is set to be the member's PERMANENT address,
 	   because we use it to identify loopback MARKERs in receive. */
 	memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
 	marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave)
 		return -1;
 	}
 
-	//check that the slave has not been intialized yet.
+	//check that the slave has not been initialized yet.
 	if (SLAVE_AD_INFO(slave).port.slave != slave) {
 
 		// port initialization
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 63ebf76..8a43c7e 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -556,7 +556,7 @@ struct chelsio_vpd_t {
 #define EEPROM_MAX_POLL   4
 
 /*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
  * written to the Control register. The hardware device will set the flag to a
  * one when 4B have been transferred to the Data register.
  */
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c
index a8766fb..e13b7fe 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/cxgb3/mc5.c
@@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
 
 /*
  * Initialization that requires the OS and protocol layers to already
- * be intialized goes here.
+ * be initialized goes here.
  */
 int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
 		unsigned int nroutes)
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index ec8579a..d55db6b 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -607,7 +607,7 @@ struct t3_vpd {
  *
  *	Read a 32-bit word from a location in VPD EEPROM using the card's PCI
  *	VPD ROM capability.  A zero is written to the flag bit when the
- *	addres is written to the control register.  The hardware device will
+ *	address is written to the control register.  The hardware device will
  *	set the flag to 1 when 4 bytes have been read into the data register.
  */
 int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index f5514a0..196eeda 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -41,7 +41,7 @@ struct e1000_hw;
 struct e1000_hw_stats;
 
 /* Enumerated types specific to the e1000 hardware */
-/* Media Access Controlers */
+/* Media Access Controllers */
 typedef enum {
 	e1000_undefined = 0,
 	e1000_82542_rev2_0,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4ff88a6..de69c54 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2233,7 +2233,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 * addresses take precedence to avoid disabling unicast filtering
 	 * when possible.
 	 *
-	 * RAR 0 is used for the station MAC adddress
+	 * RAR 0 is used for the station MAC address
 	 * if there are not 14 addresses, go ahead and clear the filters
 	 */
 	i = 1;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cb6c7b1..1397da1 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -328,7 +328,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 
 	/*
 	 * Ensure that the inter-port SWSM.SMBI lock bit is clear before
-	 * first NVM or PHY acess. This should be done for single-port
+	 * first NVM or PHY access. This should be done for single-port
 	 * devices, and for one port only on dual-port devices so that
 	 * for those devices we can still use the SMBI lock to synchronize
 	 * inter-port accesses to the PHY & NVM.
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 5328a292..5bb65b7 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -321,7 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	}
 
 	/*
-	 * Reset the PHY before any acccess to it.  Doing so, ensures that
+	 * Reset the PHY before any access to it.  Doing so, ensures that
 	 * the PHY is in a known good state before we read/write PHY registers.
 	 * The generic reset is sufficient here, because we haven't determined
 	 * the PHY type yet.
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a640f1c..00f89e8 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2986,7 +2986,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  e1000_get_phy_addr_for_hv_page - Get PHY address based on page
  *  @page: page to be accessed
  **/
 static u32 e1000_get_phy_addr_for_hv_page(u32 page)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 4fa8d2a..eb35951 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1761,7 +1761,7 @@ module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param_array(mem, int, NULL, 0);
 module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
 MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
 MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 4dc39e5..77fcf44 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
  *     or the type-DO IR port.
  *
  * IrDA chip set list from Toshiba Computer Engineering Corp.
- * model			method	maker	controler		Version 
+ * model			method	maker	controller		Version 
  * Portege 320CT	FIR,SIR Toshiba Oboe(Triangle) 
  * Portege 3010CT	FIR,SIR Toshiba Oboe(Sydney) 
  * Portege 3015CT	FIR,SIR Toshiba Oboe(Sydney) 
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 8d316d9..a21f581 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1079,7 +1079,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
 
 	/*
 	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
-	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * initialized to zero for non DCB mode otherwise actual total RX PB
 	 * would be bigger than programmed and filter space would run into
 	 * the PB 0 region.
 	 */
@@ -1167,7 +1167,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 
 	/*
 	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
-	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * initialized to zero for non DCB mode otherwise actual total RX PB
 	 * would be bigger than programmed and filter space would run into
 	 * the PB 0 region.
 	 */
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 183765c..f35554d 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev)
 		goto out;
 	}
 	/* allocate the tx and rx ring buffer descriptors. */
-	/* returns a virtual addres and a physical address. */
+	/* returns a virtual address and a physical address. */
 	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
 					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
 					 &lp->tx_bd_p, GFP_KERNEL);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 5818368..5976d1d 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -36,7 +36,7 @@
    Rev 1.07.06 Nov.  7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
    Rev 1.07.05 Nov.  6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
    Rev 1.07.04 Sep.  6 2000 Lei-Chun Chang added ICS1893 PHY support
-   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule
+   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule
    Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
    Rev 1.07    Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
    Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 296000b..3397618 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -12,7 +12,7 @@
 /*
  * RX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of RX communication channels betwean driver and NIC.
+ * There are 2 types of RX communication channels between driver and NIC.
  * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
  * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
  * info about buffer's location, size and ID. An ID field is used to identify a
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev)
 		}
 
 		/* use PMF to accept first MAC_MCST_NUM (15) addresses */
-		/* TBD: sort addreses and write them in ascending order
+		/* TBD: sort addresses and write them in ascending order
 		 * into RX_MAC_MCST regs. we skip this phase now and accept ALL
 		 * multicast frames throu IMF */
 		/* accept the rest of addresses throu IMF */
@@ -1346,7 +1346,7 @@ static void print_rxfd(struct rxf_desc *rxfd)
 /*
  * TX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of TX communication channels betwean driver and NIC.
+ * There are 2 types of TX communication channels between driver and NIC.
  * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
  * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
  *
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 7599c45..b100bd5 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case SIOCGIFHWADDR:
-		/* Get hw addres */
+		/* Get hw address */
 		memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
 		ifr.ifr_hwaddr.sa_family = tun->dev->type;
 		if (copy_to_user(argp, &ifr, ifreq_len))
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cab96ad..09cac70 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -898,7 +898,7 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
 	set_mii_flow_control(vptr);
 
 	/*
-	   Check if new status is consisent with current status
+	   Check if new status is consistent with current status
 	   if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
 	       (mii_status==curr_status)) {
 	   vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 8c3103f..d48486d 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err {
  * struct vxge_hw_device_stats - Contains HW per-device statistics,
  * including hw.
  * @devh: HW device handle.
- * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
  * @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
  *                space.
  * @hw_info_dma_acch: One more DMA handle used subsequently to free the
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 34cff6c..4578e5b 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -125,7 +125,7 @@ static u32 dscc4_pci_config_store[16];
 /* Module parameters */
 
 MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
-MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
+MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
 MODULE_LICENSE("GPL");
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug,"Enable/disable extra messages");
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index f060332..65bc334 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -232,7 +232,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
 			result);
 		goto error;
 	}
-	/* Extract MAC addresss */
+	/* Extract MAC address */
 	ddi = (void *) skb->data;
 	BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
 	d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 17ecaa4..030cbfd 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -186,7 +186,7 @@ enum {
  * struct i2400m_poke_table - Hardware poke table for the Intel 2400m
  *
  * This structure will be used to create a device specific poke table
- * to put the device in a consistant state at boot time.
+ * to put the device in a consistent state at boot time.
  *
  * @address: The device address to poke
  *
@@ -703,7 +703,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
  *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
- *     intialized after reading the MAC address.
+ *     initialized after reading the MAC address.
  */
 enum i2400m_bri {
 	I2400M_BRI_SOFT       = 1 << 1,
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7ad05d4..fd14b91 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1064,7 +1064,7 @@
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD		0x6008			/* Register Addres */
+#define AR5K_EEPROM_CMD		0x6008			/* Register Address */
 #define AR5K_EEPROM_CMD_READ	0x00000001	/* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE	0x00000002	/* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET	0x00000004	/* EEPROM reset */
@@ -1084,7 +1084,7 @@
 /*
  * EEPROM config register
  */
-#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG			0x6010			/* Register Address */
 #define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
 #define AR5K_EEPROM_CFG_SIZE_AUTO	0
 #define AR5K_EEPROM_CFG_SIZE_4KBIT	1
@@ -1126,7 +1126,7 @@
  * Second station id register (Upper 16 bits of MAC address + PCU settings)
  */
 #define AR5K_STA_ID1			0x8004			/* Register Address */
-#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC addres */
+#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
 #define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b6..be48281 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
 	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
 }
 
-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd..28e477d 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
 	phy->calibrated = 1;
 }
 
-/* intialize B PHY power control
+/* initialize B PHY power control
  * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
  */
 static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index a5dbfea..b5cb3be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -197,7 +197,7 @@ static irqreturn_t iwl_isr(int irq, void *data)
 
  none:
 	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if diabled by irq  and no schedules tasklet. */
+	/* only Re-enable if disabled by irq  and no schedules tasklet. */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
 		iwl_enable_interrupts(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f13a83a..36335b1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1154,7 +1154,7 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 	}
 
 	/* Re-enable all interrupts */
-	/* only Re-enable if diabled by irq */
+	/* only Re-enable if disabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
 
@@ -1368,7 +1368,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	}
 
 	/* Re-enable all interrupts */
-	/* only Re-enable if diabled by irq */
+	/* only Re-enable if disabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
index a08b4e5..bb1a742 100644
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ b/drivers/net/wireless/iwlwifi/iwl-legacy.c
@@ -619,7 +619,7 @@ unplugged:
 
 none:
 	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if diabled by irq */
+	/* only Re-enable if disabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 4776323..49493d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
 	/*
 	 * XXX: The MAC address in the command buffer is often changed from
 	 * the original sent to the device. That is, the MAC address
-	 * written to the command buffer often is not the same MAC adress
+	 * written to the command buffer often is not the same MAC address
 	 * read from the command buffer when the command returns. This
 	 * issue has not yet been resolved and this debugging is left to
 	 * observe the problem.
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2c8cc95..ec2c75d 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv)
 	printk(KERN_DEBUG "islpci_alloc_memory\n");
 #endif
 
-	/* remap the PCI device base address to accessable */
+	/* remap the PCI device base address to accessible */
 	if (!(priv->device_base =
 	      ioremap(pci_resource_start(priv->pdev, 0),
 		      ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv)
 				   PCI_DMA_FROMDEVICE);
 		if (!priv->pci_map_rx_address[counter]) {
 			/* error mapping the buffer to device
-			   accessable memory address */
+			   accessible memory address */
 			printk(KERN_ERR "failed to map skb DMA'able\n");
 			goto out_free;
 		}
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
 		priv->data_low_rx[counter] = NULL;
 	}
 
-	/* Free the acces control list and the WPA list */
+	/* Free the access control list and the WPA list */
 	prism54_acl_clean(&priv->acl);
 	prism54_wpa_bss_ie_clean(priv);
 	mgt_clean(priv);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 2fc52bc..d44f8e2 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv)
 				   MAX_FRAGMENT_SIZE_RX + 2,
 				   PCI_DMA_FROMDEVICE);
 		if (unlikely(!priv->pci_map_rx_address[index])) {
-			/* error mapping the buffer to device accessable memory address */
+			/* error mapping the buffer to device accessible memory address */
 			DEBUG(SHOW_ERROR_MESSAGES,
 			      "Error mapping DMA address\n");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 658542d..f3da051 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -273,7 +273,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	intf->beacon = entry;
 
 	/*
-	 * The MAC adddress must be configured after the device
+	 * The MAC address must be configured after the device
 	 * has been initialized. Otherwise the device can reset
 	 * the MAC registers.
 	 * The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl1251/acx.h b/drivers/net/wireless/wl1251/acx.h
index e54b21a..efcc3aa 100644
--- a/drivers/net/wireless/wl1251/acx.h
+++ b/drivers/net/wireless/wl1251/acx.h
@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg {
 /* OBSOLETE */
 #define WL1251_ACX_INTR_WAKE_ON_HOST	BIT(6)
 
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1251_ACX_INTR_TRACE_A		BIT(7)
 
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1251_ACX_INTR_TRACE_B		BIT(8)
 
 /* Command processing completion */
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index 13fbeec..c0ce2c8 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -419,7 +419,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 #define WL1251_FW_NAME "wl1251-fw.bin"
 #define WL1251_NVS_NAME "wl1251-nvs.bin"
 
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
 
 #define WL1251_PART_DOWN_MEM_START	0x0
 #define WL1251_PART_DOWN_MEM_SIZE	0x16800
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 9cbc3f4..7bd8e4d 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -47,9 +47,9 @@
 #define WL1271_ACX_INTR_HW_AVAILABLE       BIT(5)
 /* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
 #define WL1271_ACX_INTR_DATA               BIT(6)
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1271_ACX_INTR_TRACE_A            BIT(7)
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1271_ACX_INTR_TRACE_B            BIT(8)
 
 #define WL1271_ACX_INTR_ALL		   0xFFFFFFFF
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ce3d31f..9050dd9 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -416,8 +416,8 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
    on in case is has been shut down shortly before */
-#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
-#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
+#define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
 
 /* Macros to handle wl1271.sta_rate_set */
 #define HW_BG_RATES_MASK	0xffff
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df6..3e5befe4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 }
 
 /*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
  *
  * WARNING: We switch to FPAGE0 and switc back again.
  *          Making sure there is no other WL function beening called by ISR.