[IrDA]: Irport removal - part 1

This patch removes IrPORT and the old dongle drivers (all off them
have replacement drivers).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 2 insertions, 1359 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 6580695..ce816ba 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -190,147 +190,6 @@ config KS959_DONGLE
 	  To compile it as a module, choose M here: the module will be called
 	  ks959-sir.
 
-comment "Old SIR device drivers"
-
-config IRPORT_SIR
-	tristate "IrPORT (IrDA serial driver)"
-	depends on IRDA && BROKEN_ON_SMP
-	---help---
-	  Say Y here if you want to build support for the IrPORT IrDA device
-	  driver.  To compile it as a module, choose M here: the module will be
-	  called irport. IrPORT can be used instead of IrTTY and sometimes
-	  this can be better.  One example is if your IrDA port does not
-	  have echo-canceling, which will work OK with IrPORT since this
-	  driver is working in half-duplex mode only.  You don't need to use
-	  irattach with IrPORT, but you just insert it the same way as FIR
-	  drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
-	  SIR device driver which means that speed is limited to 115200 bps.
-
-	  If unsure, say Y.
-
-comment "Old Serial dongle support"
-
-config DONGLE_OLD
-	bool "Old Serial dongle support"
-	depends on IRPORT_SIR && BROKEN_ON_SMP
-	help
-	  Say Y here if you have an infrared device that connects to your
-	  computer's serial port. These devices are called dongles. Then say Y
-	  or M to the driver for your particular dongle below.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial dongles.
-
-config ESI_DONGLE_OLD
-	tristate "ESI JetEye PC dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Extended Systems
-	  JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for ESI
-	  dongles you will have to start irattach like this:
-	  "irattach -d esi".
-
-config ACTISYS_DONGLE_OLD
-	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-220L and
-	  IR220L+ dongles.  To compile it as a module, choose M here.  The
-	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY.  To activate support for
-	  ACTiSYS dongles you will have to start irattach like this:
-	  "irattach -d actisys" or "irattach -d actisys+".
-
-config TEKRAM_DONGLE_OLD
-	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Tekram IrMate 210B
-	  dongle.  To compile it as a module, choose M here.  The Tekram dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Tekram
-	  dongles you will have to start irattach like this:
-	  "irattach -d tekram".
-
-config GIRBIL_DONGLE_OLD
-	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Greenwich GIrBIL
-	  dongle.  To compile it as a module, choose M here.  The Greenwich
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Greenwich
-	  dongles you will have to insert "irattach -d girbil" in the
-	  /etc/irda/drivers script.
-
-config LITELINK_DONGLE_OLD
-	tristate "Parallax LiteLink dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Parallax Litelink
-	  dongle.  To compile it as a module, choose M here.  The Parallax
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Parallax
-	  dongles you will have to start irattach like this:
-	  "irattach -d litelink".
-
-config MCP2120_DONGLE_OLD
-	tristate "Microchip MCP2120"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Microchip MCP2120
-	  dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for MCP2120
-	  dongles you will have to insert "irattach -d mcp2120" in the
-	  /etc/irda/drivers script.
-
-	  You must build this dongle yourself.  For more information see:
-	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
-
-config OLD_BELKIN_DONGLE_OLD
-	tristate "Old Belkin dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Adaptec Airport 1000
-	  and 2000 dongles.  To compile it as a module, choose M here: the module
-	  will be called old_belkin.  Some information is contained in the
-	  comments at the top of <file:drivers/net/irda/old_belkin.c>.
-
-config ACT200L_DONGLE_OLD
-	tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
-	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-200L
-	  dongle.  To compile it as a module, choose M here.  The ACTiSYS
-	  IR-200L dongle attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY. To activate support for
-	  ACTiSYS IR-200L dongles you will have to start irattach like this:
-	  "irattach -d act200l".
-
-config MA600_DONGLE_OLD
-	tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
-	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
-	---help---
-	  Say Y here if you want to build support for the Mobile Action MA600
-	  dongle.  To compile it as a module, choose M here. The MA600 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be tested on IrCOMM.  To activate support for MA600
-	  dongles you will have to insert "irattach -d ma600" in the
-	  /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
-	  modification. irutils 0.9.9 needs modification. For more
-	  information, download the following tar gzip file.
-
-	  There is a pre-compiled module on
-	  <http://engsvr.ust.hk/~eetwl95/ma600.html>
-
-config EP7211_IR
-	tristate "EP7211 I/R support"
-	depends on DONGLE_OLD && ARCH_EP7211 && IRDA
-
 comment "FIR device drivers"
 
 config USB_IRDA
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index fefbb59..5d20fde 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-# Old SIR drivers 
-obj-$(CONFIG_IRPORT_SIR)	+= 		irport.o
 # FIR drivers
 obj-$(CONFIG_USB_IRDA)		+= irda-usb.o
 obj-$(CONFIG_SIGMATEL_FIR)	+= stir4200.o
@@ -20,21 +18,10 @@ obj-$(CONFIG_VLSI_FIR)		+= vlsi_ir.o
 obj-$(CONFIG_VIA_FIR)		+= via-ircc.o
 obj-$(CONFIG_PXA_FICP)	        += pxaficp_ir.o
 obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
-# Old dongle drivers for old SIR drivers
-obj-$(CONFIG_ESI_DONGLE_OLD)		+= esi.o
-obj-$(CONFIG_TEKRAM_DONGLE_OLD)	+= tekram.o
-obj-$(CONFIG_ACTISYS_DONGLE_OLD)	+= actisys.o
-obj-$(CONFIG_GIRBIL_DONGLE_OLD)	+= girbil.o
-obj-$(CONFIG_LITELINK_DONGLE_OLD)	+= litelink.o
-obj-$(CONFIG_OLD_BELKIN_DONGLE_OLD)	+= old_belkin.o
-obj-$(CONFIG_MCP2120_DONGLE_OLD)	+= mcp2120.o
-obj-$(CONFIG_ACT200L_DONGLE_OLD)	+= act200l.o
-obj-$(CONFIG_MA600_DONGLE_OLD)	+= ma600.o
-obj-$(CONFIG_EP7211_IR)		+= ep7211_ir.o
 obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
-# New SIR drivers
+# SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
-# New dongles drivers for new SIR drivers
+# dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
 obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
 obj-$(CONFIG_ACTISYS_DONGLE)	+= actisys-sir.o
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
deleted file mode 100644
index c79caa5..0000000
--- a/drivers/net/irda/irport.c
+++ /dev/null
@@ -1,1123 +0,0 @@
-/*********************************************************************
- * 
- * Filename:	  irport.c
- * Version:	  1.0
- * Description:   Half duplex serial port SIR driver for IrDA. 
- * Status:	  Experimental.
- * Author:	  Dag Brattli <dagb@cs.uit.no>
- * Created at:	  Sun Aug  3 13:49:59 1997
- * Modified at:   Fri Jan 28 20:22:38 2000
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * Sources:	  serial.c by Linus Torvalds 
- * 
- *     Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
- *     Copyright (c) 2000-2003 Jean Tourrilhes, All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *
- *     This driver is ment to be a small half duplex serial driver to be
- *     used for IR-chipsets that has a UART (16550) compatibility mode. 
- *     Eventually it will replace irtty, because of irtty has some 
- *     problems that is hard to get around when we don't have control
- *     over the serial driver. This driver may also be used by FIR 
- *     drivers to handle SIR mode for them.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/skbuff.h>
-#include <linux/serial_reg.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/rtnetlink.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/wrapper.h>
-#include "irport.h"
-
-#define IO_EXTENT 8
-
-/* 
- * Currently you'll need to set these values using insmod like this:
- * insmod irport io=0x3e8 irq=11
- */
-static unsigned int io[]  = { ~0, ~0, ~0, ~0 };
-static unsigned int irq[] = { 0, 0, 0, 0 };
-
-static unsigned int qos_mtt_bits = 0x03;
-
-static struct irport_cb *dev_self[] = { NULL, NULL, NULL, NULL};
-static char *driver_name = "irport";
-
-static inline void irport_write_wakeup(struct irport_cb *self);
-static inline int  irport_write(int iobase, int fifo_size, __u8 *buf, int len);
-static inline void irport_receive(struct irport_cb *self);
-
-static int  irport_net_ioctl(struct net_device *dev, struct ifreq *rq, 
-			     int cmd);
-static inline int  irport_is_receiving(struct irport_cb *self);
-static int  irport_set_dtr_rts(struct net_device *dev, int dtr, int rts);
-static int  irport_raw_write(struct net_device *dev, __u8 *buf, int len);
-static struct net_device_stats *irport_net_get_stats(struct net_device *dev);
-static int irport_change_speed_complete(struct irda_task *task);
-static void irport_timeout(struct net_device *dev);
-
-static irqreturn_t irport_interrupt(int irq, void *dev_id);
-static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev);
-static void irport_change_speed(void *priv, __u32 speed);
-static int irport_net_open(struct net_device *dev);
-static int irport_net_close(struct net_device *dev);
-
-static struct irport_cb *
-irport_open(int i, unsigned int iobase, unsigned int irq)
-{
-	struct net_device *dev;
-	struct irport_cb *self;
-
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
-
-	/* Lock the port that we need */
-	if (!request_region(iobase, IO_EXTENT, driver_name)) {
-		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-			   __FUNCTION__, iobase);
-		goto err_out1;
-	}
-
-	/*
-	 *  Allocate new instance of the driver
-	 */
-	dev = alloc_irdadev(sizeof(struct irport_cb));
-	if (!dev) {
-		IRDA_ERROR("%s(), can't allocate memory for "
-			   "irda device!\n", __FUNCTION__);
-		goto err_out2;
-	}
-
-	self = dev->priv;
-	spin_lock_init(&self->lock);
-
-	/* Need to store self somewhere */
-	dev_self[i] = self;
-	self->priv = self;
-	self->index = i;
-
-	/* Initialize IO */
-	self->io.sir_base  = iobase;
-        self->io.sir_ext   = IO_EXTENT;
-        self->io.irq       = irq;
-        self->io.fifo_size = 16;		/* 16550A and compatible */
-
-	/* Initialize QoS for this device */
-	irda_init_max_qos_capabilies(&self->qos);
-	
-	self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
-		IR_115200;
-
-	self->qos.min_turn_time.bits = qos_mtt_bits;
-	irda_qos_bits_to_value(&self->qos);
-	
-	/* Bootstrap ZeroCopy Rx */
-	self->rx_buff.truesize = IRDA_SKB_MAX_MTU;
-	self->rx_buff.skb = __dev_alloc_skb(self->rx_buff.truesize,
-					    GFP_KERNEL);
-	if (self->rx_buff.skb == NULL) {
-		IRDA_ERROR("%s(), can't allocate memory for "
-			   "receive buffer!\n", __FUNCTION__);
-		goto err_out3;
-	}
-	skb_reserve(self->rx_buff.skb, 1);
-	self->rx_buff.head = self->rx_buff.skb->data;
-	/* No need to memset the buffer, unless you are really pedantic */
-
-	/* Finish setup the Rx buffer descriptor */
-	self->rx_buff.in_frame = FALSE;
-	self->rx_buff.state = OUTSIDE_FRAME;
-	self->rx_buff.data = self->rx_buff.head;
-
-	/* Specify how much memory we want */
-	self->tx_buff.truesize = 4000;
-	
-	/* Allocate memory if needed */
-	if (self->tx_buff.truesize > 0) {
-		self->tx_buff.head = kzalloc(self->tx_buff.truesize,
-						      GFP_KERNEL);
-		if (self->tx_buff.head == NULL) {
-			IRDA_ERROR("%s(), can't allocate memory for "
-				   "transmit buffer!\n", __FUNCTION__);
-			goto err_out4;
-		}
-	}	
-	self->tx_buff.data = self->tx_buff.head;
-
-	self->netdev = dev;
-
-	/* May be overridden by piggyback drivers */
-	self->interrupt    = irport_interrupt;
-	self->change_speed = irport_change_speed;
-
-	/* Override the network functions we need to use */
-	dev->hard_start_xmit = irport_hard_xmit;
-	dev->tx_timeout	     = irport_timeout;
-	dev->watchdog_timeo  = HZ;  /* Allow time enough for speed change */
-	dev->open            = irport_net_open;
-	dev->stop            = irport_net_close;
-	dev->get_stats	     = irport_net_get_stats;
-	dev->do_ioctl        = irport_net_ioctl;
-
-	/* Make ifconfig display some details */
-	dev->base_addr = iobase;
-	dev->irq = irq;
-
-	if (register_netdev(dev)) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
-		goto err_out5;
-	}
-	IRDA_MESSAGE("IrDA: Registered device %s (irport io=0x%X irq=%d)\n",
-		dev->name, iobase, irq);
-
-	return self;
- err_out5:
-	kfree(self->tx_buff.head);
- err_out4:
-	kfree_skb(self->rx_buff.skb);
- err_out3:
-	free_netdev(dev);
-	dev_self[i] = NULL;
- err_out2:
-	release_region(iobase, IO_EXTENT);
- err_out1:
-	return NULL;
-}
-
-static int irport_close(struct irport_cb *self)
-{
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	/* We are not using any dongle anymore! */
-	if (self->dongle)
-		irda_device_dongle_cleanup(self->dongle);
-	self->dongle = NULL;
-	
-	/* Remove netdevice */
-	unregister_netdev(self->netdev);
-
-	/* Release the IO-port that this driver is using */
-	IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-		   __FUNCTION__, self->io.sir_base);
-	release_region(self->io.sir_base, self->io.sir_ext);
-
-	kfree(self->tx_buff.head);
-	
-	if (self->rx_buff.skb)
-		kfree_skb(self->rx_buff.skb);
-	self->rx_buff.skb = NULL;
-	
-	/* Remove ourselves */
-	dev_self[self->index] = NULL;
-	free_netdev(self->netdev);
-	
-	return 0;
-}
-
-static void irport_stop(struct irport_cb *self)
-{
-	int iobase;
-
-	iobase = self->io.sir_base;
-
-	/* We can't lock, we may be called from a FIR driver - Jean II */
-
-	/* We are not transmitting any more */
-	self->transmitting = 0;
-
-	/* Reset UART */
-	outb(0, iobase+UART_MCR);
-	
-	/* Turn off interrupts */
-	outb(0, iobase+UART_IER);
-}
-
-static void irport_start(struct irport_cb *self)
-{
-	int iobase;
-
-	iobase = self->io.sir_base;
-
-	irport_stop(self);
-	
-	/* We can't lock, we may be called from a FIR driver - Jean II */
-
-	/* Initialize UART */
-	outb(UART_LCR_WLEN8, iobase+UART_LCR);  /* Reset DLAB */
-	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
-	
-	/* Turn on interrups */
-	outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
-}
-
-/*
- * Function irport_get_fcr (speed)
- *
- *    Compute value of fcr
- *
- */
-static inline unsigned int irport_get_fcr(__u32 speed)
-{
-	unsigned int fcr;    /* FIFO control reg */
-
-	/* Enable fifos */
-	fcr = UART_FCR_ENABLE_FIFO;
-
-	/* 
-	 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
-	 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
-	 * about this timeout since it will always be fast enough. 
-	 */
-	if (speed < 38400)
-		fcr |= UART_FCR_TRIGGER_1;
-	else 
-		//fcr |= UART_FCR_TRIGGER_14;
-		fcr |= UART_FCR_TRIGGER_8;
-
-	return(fcr);
-}
- 
-/*
- * Function irport_change_speed (self, speed)
- *
- *    Set speed of IrDA port to specified baudrate
- *
- * This function should be called with irq off and spin-lock.
- */
-static void irport_change_speed(void *priv, __u32 speed)
-{
-	struct irport_cb *self = (struct irport_cb *) priv;
-	int iobase; 
-	unsigned int fcr;    /* FIFO control reg */
-	unsigned int lcr;    /* Line control reg */
-	int divisor;
-
-	IRDA_ASSERT(self != NULL, return;);
-	IRDA_ASSERT(speed != 0, return;);
-
-	IRDA_DEBUG(1, "%s(), Setting speed to: %d - iobase=%#x\n",
-		    __FUNCTION__, speed, self->io.sir_base);
-
-	/* We can't lock, we may be called from a FIR driver - Jean II */
-
-	iobase = self->io.sir_base;
-	
-	/* Update accounting for new speed */
-	self->io.speed = speed;
-
-	/* Turn off interrupts */
-	outb(0, iobase+UART_IER); 
-
-	divisor = SPEED_MAX/speed;
-	
-	/* Get proper fifo configuration */
-	fcr = irport_get_fcr(speed);
-
-	/* IrDA ports use 8N1 */
-	lcr = UART_LCR_WLEN8;
-	
-	outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
-	outb(divisor & 0xff,      iobase+UART_DLL); /* Set speed */
-	outb(divisor >> 8,	  iobase+UART_DLM);
-	outb(lcr,		  iobase+UART_LCR); /* Set 8N1	*/
-	outb(fcr,		  iobase+UART_FCR); /* Enable FIFO's */
-
-	/* Turn on interrups */
-	/* This will generate a fatal interrupt storm.
-	 * People calling us will do that properly - Jean II */
-	//outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
-}
-
-/*
- * Function __irport_change_speed (instance, state, param)
- *
- *    State machine for changing speed of the device. We do it this way since
- *    we cannot use schedule_timeout() when we are in interrupt context
- *
- */
-static int __irport_change_speed(struct irda_task *task)
-{
-	struct irport_cb *self;
-	__u32 speed = (__u32) task->param;
-	unsigned long flags = 0;
-	int wasunlocked = 0;
-	int ret = 0;
-
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies); 
-
-	self = (struct irport_cb *) task->instance;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	/* Locking notes : this function may be called from irq context with
-	 * spinlock, via irport_write_wakeup(), or from non-interrupt without
-	 * spinlock (from the task timer). Yuck !
-	 * This is ugly, and unsafe is the spinlock is not already acquired.
-	 * This will be fixed when irda-task get rewritten.
-	 * Jean II */
-	if (!spin_is_locked(&self->lock)) {
-		spin_lock_irqsave(&self->lock, flags);
-		wasunlocked = 1;
-	}
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-	case IRDA_TASK_WAIT:
-		/* Are we ready to change speed yet? */
-		if (self->tx_buff.len > 0) {
-			task->state = IRDA_TASK_WAIT;
-
-			/* Try again later */
-			ret = msecs_to_jiffies(20);
-			break;
-		}
-
-		if (self->dongle)
-			irda_task_next_state(task, IRDA_TASK_CHILD_INIT);
-		else
-			irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
-		break;
-	case IRDA_TASK_CHILD_INIT:
-		/* Go to default speed */
-		self->change_speed(self->priv, 9600);
-
-		/* Change speed of dongle */
-		if (irda_task_execute(self->dongle,
-				      self->dongle->issue->change_speed, 
-				      NULL, task, (void *) speed))
-		{
-			/* Dongle need more time to change its speed */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
-			/* Give dongle 1 sec to finish */
-			ret = msecs_to_jiffies(1000);
-		} else
-			/* Child finished immediately */
-			irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
-		break;
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), changing speed of dongle timed out!\n", __FUNCTION__);
-		ret = -1;		
-		break;
-	case IRDA_TASK_CHILD_DONE:
-		/* Finally we are ready to change the speed */
-		self->change_speed(self->priv, speed);
-		
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		ret = -1;
-		break;
-	}
-	/* Put stuff in the state we found them - Jean II */
-	if(wasunlocked) {
-		spin_unlock_irqrestore(&self->lock, flags);
-	}
-
-	return ret;
-}
-
-/*
- * Function irport_change_speed_complete (task)
- *
- *    Called when the change speed operation completes
- *
- */
-static int irport_change_speed_complete(struct irda_task *task)
-{
-	struct irport_cb *self;
-
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
-
-	self = (struct irport_cb *) task->instance;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-	IRDA_ASSERT(self->netdev != NULL, return -1;);
-
-	/* Finished changing speed, so we are not busy any longer */
-	/* Signal network layer so it can try to send the frame */
-
-	netif_wake_queue(self->netdev);
-	
-	return 0;
-}
-
-/*
- * Function irport_timeout (struct net_device *dev)
- *
- *    The networking layer thinks we timed out.
- *
- */
-
-static void irport_timeout(struct net_device *dev)
-{
-	struct irport_cb *self;
-	int iobase;
-	int iir, lsr;
-	unsigned long flags;
-
-	self = (struct irport_cb *) dev->priv;
-	IRDA_ASSERT(self != NULL, return;);
-	iobase = self->io.sir_base;
-	
-	IRDA_WARNING("%s: transmit timed out, jiffies = %ld, trans_start = %ld\n",
-		dev->name, jiffies, dev->trans_start);
-	spin_lock_irqsave(&self->lock, flags);
-
-	/* Debug what's happening... */
-
-	/* Get interrupt status */
-	lsr = inb(iobase+UART_LSR);
-	/* Read interrupt register */
-	iir = inb(iobase+UART_IIR);
-	IRDA_DEBUG(0, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", 
-		   __FUNCTION__, iir, lsr, iobase);
-
-	IRDA_DEBUG(0, "%s(), transmitting=%d, remain=%d, done=%td\n",
-		   __FUNCTION__, self->transmitting, self->tx_buff.len,
-		   self->tx_buff.data - self->tx_buff.head);
-
-	/* Now, restart the port */
-	irport_start(self);
-	self->change_speed(self->priv, self->io.speed);
-	/* This will re-enable irqs */
-	outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
-	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(&self->lock, flags);
-
-	netif_wake_queue(dev);
-}
- 
-/*
- * Function irport_wait_hw_transmitter_finish ()
- *
- *    Wait for the real end of HW transmission
- *
- * The UART is a strict FIFO, and we get called only when we have finished
- * pushing data to the FIFO, so the maximum amount of time we must wait
- * is only for the FIFO to drain out.
- *
- * We use a simple calibrated loop. We may need to adjust the loop
- * delay (udelay) to balance I/O traffic and latency. And we also need to
- * adjust the maximum timeout.
- * It would probably be better to wait for the proper interrupt,
- * but it doesn't seem to be available.
- *
- * We can't use jiffies or kernel timers because :
- * 1) We are called from the interrupt handler, which disable softirqs,
- * so jiffies won't be increased
- * 2) Jiffies granularity is usually very coarse (10ms), and we don't
- * want to wait that long to detect stuck hardware.
- * Jean II
- */
-
-static void irport_wait_hw_transmitter_finish(struct irport_cb *self)
-{
-	int iobase;
-	int count = 1000;	/* 1 ms */
-	
-	iobase = self->io.sir_base;
-
-	/* Calibrated busy loop */
-	while((count-- > 0) && !(inb(iobase+UART_LSR) & UART_LSR_TEMT))
-		udelay(1);
-
-	if(count == 0)
-		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
-}
-
-/*
- * Function irport_hard_start_xmit (struct sk_buff *skb, struct net_device *dev)
- *
- *    Transmits the current frame until FIFO is full, then
- *    waits until the next transmitt interrupt, and continues until the
- *    frame is transmitted.
- */
-static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct irport_cb *self;
-	unsigned long flags;
-	int iobase;
-	s32 speed;
-
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
-
-	IRDA_ASSERT(dev != NULL, return 0;);
-	
-	self = (struct irport_cb *) dev->priv;
-	IRDA_ASSERT(self != NULL, return 0;);
-
-	iobase = self->io.sir_base;
-
-	netif_stop_queue(dev);
-
-	/* Make sure tests & speed change are atomic */
-	spin_lock_irqsave(&self->lock, flags);
-
-	/* Check if we need to change the speed */
-	speed = irda_get_next_speed(skb);
-	if ((speed != self->io.speed) && (speed != -1)) {
-		/* Check for empty frame */
-		if (!skb->len) {
-			/*
-			 * We send frames one by one in SIR mode (no
-			 * pipelining), so at this point, if we were sending
-			 * a previous frame, we just received the interrupt
-			 * telling us it is finished (UART_IIR_THRI).
-			 * Therefore, waiting for the transmitter to really
-			 * finish draining the fifo won't take too long.
-			 * And the interrupt handler is not expected to run.
-			 * - Jean II */
-			irport_wait_hw_transmitter_finish(self);
-			/* Better go there already locked - Jean II */
-			irda_task_execute(self, __irport_change_speed, 
-					  irport_change_speed_complete, 
-					  NULL, (void *) speed);
-			dev->trans_start = jiffies;
-			spin_unlock_irqrestore(&self->lock, flags);
-			dev_kfree_skb(skb);
-			return 0;
-		} else
-			self->new_speed = speed;
-	}
-
-	/* Init tx buffer */
-	self->tx_buff.data = self->tx_buff.head;
-
-        /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
-	self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, 
-					   self->tx_buff.truesize);
-	
-	self->stats.tx_bytes += self->tx_buff.len;
-
-	/* We are transmitting */
-	self->transmitting = 1;
-
-	/* Turn on transmit finished interrupt. Will fire immediately!  */
-	outb(UART_IER_THRI, iobase+UART_IER); 
-
-	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(&self->lock, flags);
-
-	dev_kfree_skb(skb);
-	
-	return 0;
-}
-        
-/*
- * Function irport_write (driver)
- *
- *    Fill Tx FIFO with transmit data
- *
- * Called only from irport_write_wakeup()
- */
-static inline int irport_write(int iobase, int fifo_size, __u8 *buf, int len)
-{
-	int actual = 0;
-
-	/* Fill FIFO with current frame */
-	while ((actual < fifo_size) && (actual < len)) {
-		/* Transmit next byte */
-		outb(buf[actual], iobase+UART_TX);
-
-		actual++;
-	}
-        
-	return actual;
-}
-
-/*
- * Function irport_write_wakeup (tty)
- *
- *    Called by the driver when there's room for more data.  If we have
- *    more packets to send, we send them here.
- *
- * Called only from irport_interrupt()
- * Make sure this function is *not* called while we are receiving,
- * otherwise we will reset fifo and loose data :-(
- */
-static inline void irport_write_wakeup(struct irport_cb *self)
-{
-	int actual = 0;
-	int iobase;
-	unsigned int fcr;
-
-	IRDA_ASSERT(self != NULL, return;);
-
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
-
-	iobase = self->io.sir_base;
-
-	/* Finished with frame?  */
-	if (self->tx_buff.len > 0)  {
-		/* Write data left in transmit buffer */
-		actual = irport_write(iobase, self->io.fifo_size, 
-				      self->tx_buff.data, self->tx_buff.len);
-		self->tx_buff.data += actual;
-		self->tx_buff.len  -= actual;
-	} else {
-		/* 
-		 *  Now serial buffer is almost free & we can start 
-		 *  transmission of another packet. But first we must check
-		 *  if we need to change the speed of the hardware
-		 */
-		if (self->new_speed) {
-			irport_wait_hw_transmitter_finish(self);
-			irda_task_execute(self, __irport_change_speed, 
-					  irport_change_speed_complete, 
-					  NULL, (void *) self->new_speed);
-			self->new_speed = 0;
-		} else {
-			/* Tell network layer that we want more frames */
-			netif_wake_queue(self->netdev);
-		}
-		self->stats.tx_packets++;
-
-		/* 
-		 * Reset Rx FIFO to make sure that all reflected transmit data
-		 * is discarded. This is needed for half duplex operation
-		 */
-		fcr = irport_get_fcr(self->io.speed);
-		fcr |= UART_FCR_CLEAR_RCVR;
-		outb(fcr, iobase+UART_FCR);
-
-		/* Finished transmitting */
-		self->transmitting = 0;
-
-		/* Turn on receive interrupts */
-		outb(UART_IER_RDI, iobase+UART_IER);
-
-		IRDA_DEBUG(1, "%s() : finished Tx\n", __FUNCTION__);
-	}
-}
-
-/*
- * Function irport_receive (self)
- *
- *    Receive one frame from the infrared port
- *
- * Called only from irport_interrupt()
- */
-static inline void irport_receive(struct irport_cb *self) 
-{
-	int boguscount = 0;
-	int iobase;
-
-	IRDA_ASSERT(self != NULL, return;);
-
-	iobase = self->io.sir_base;
-
-	/*  
-	 * Receive all characters in Rx FIFO, unwrap and unstuff them. 
-         * async_unwrap_char will deliver all found frames  
-	 */
-	do {
-		async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, 
-				  inb(iobase+UART_RX));
-
-		/* Make sure we don't stay here too long */
-		if (boguscount++ > 32) {
-			IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
-			break;
-		}
-	} while (inb(iobase+UART_LSR) & UART_LSR_DR);	
-}
-
-/*
- * Function irport_interrupt (irq, dev_id)
- *
- *    Interrupt handler
- */
-static irqreturn_t irport_interrupt(int irq, void *dev_id) 
-{
-	struct net_device *dev = dev_id;
-	struct irport_cb *self;
-	int boguscount = 0;
-	int iobase;
-	int iir, lsr;
-	int handled = 0;
-
-	self = dev->priv;
-
-	spin_lock(&self->lock);
-
-	iobase = self->io.sir_base;
-
-	/* Cut'n'paste interrupt routine from serial.c
-	 * This version try to minimise latency and I/O operations.
-	 * Simplified and modified to enforce half duplex operation.
-	 * - Jean II */
-
-	/* Check status even is iir reg is cleared, more robust and
-	 * eliminate a read on the I/O bus - Jean II */
-	do {
-		/* Get interrupt status ; Clear interrupt */
-		lsr = inb(iobase+UART_LSR);
-		
-		/* Are we receiving or transmitting ? */
-		if(!self->transmitting) {
-			/* Received something ? */
-			if (lsr & UART_LSR_DR)
-				irport_receive(self);
-		} else {
-			/* Room in Tx fifo ? */
-			if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
-				irport_write_wakeup(self);
-		}
-
-		/* A bit hackish, but working as expected... Jean II */
-		if(lsr & (UART_LSR_THRE | UART_LSR_TEMT | UART_LSR_DR))
-			handled = 1;
-
-		/* Make sure we don't stay here to long */
-		if (boguscount++ > 10) {
-			IRDA_WARNING("%s() irq handler looping : lsr=%02x\n",
-				     __FUNCTION__, lsr);
-			break;
-		}
-
-		/* Read interrupt register */
- 	        iir = inb(iobase+UART_IIR);
-
-		/* Enable this debug only when no other options and at low
-		 * bit rates, otherwise it may cause Rx overruns (lsr=63).
-		 * - Jean II */
-		IRDA_DEBUG(6, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", 
-			    __FUNCTION__, iir, lsr, iobase);
-
-		/* As long as interrupt pending... */
-	} while ((iir & UART_IIR_NO_INT) == 0);
-
-	spin_unlock(&self->lock);
-	return IRQ_RETVAL(handled);
-}
-
-/*
- * Function irport_net_open (dev)
- *
- *    Network device is taken up. Usually this is done by "ifconfig irda0 up" 
- *   
- */
-static int irport_net_open(struct net_device *dev)
-{
-	struct irport_cb *self;
-	int iobase;
-	char hwname[16];
-	unsigned long flags;
-
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
-	IRDA_ASSERT(dev != NULL, return -1;);
-	self = (struct irport_cb *) dev->priv;
-
-	iobase = self->io.sir_base;
-
-	if (request_irq(self->io.irq, self->interrupt, 0, dev->name, 
-			(void *) dev)) {
-		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
-			   __FUNCTION__, self->io.irq);
-		return -EAGAIN;
-	}
-
-	spin_lock_irqsave(&self->lock, flags);
-	/* Init uart */
-	irport_start(self);
-	/* Set 9600 bauds per default, including at the dongle */
-	irda_task_execute(self, __irport_change_speed, 
-			  irport_change_speed_complete, 
-			  NULL, (void *) 9600);
-	spin_unlock_irqrestore(&self->lock, flags);
-
-
-	/* Give self a hardware name */
-	sprintf(hwname, "SIR @ 0x%03x", self->io.sir_base);
-
-	/* 
-	 * Open new IrLAP layer instance, now that everything should be
-	 * initialized properly 
-	 */
-	self->irlap = irlap_open(dev, &self->qos, hwname);
-
-	/* Ready to play! */
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/*
- * Function irport_net_close (self)
- *
- *    Network device is taken down. Usually this is done by 
- *    "ifconfig irda0 down" 
- */
-static int irport_net_close(struct net_device *dev)
-{
-	struct irport_cb *self;
-	int iobase;
-	unsigned long flags;
-
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
-
-	IRDA_ASSERT(dev != NULL, return -1;);
-	self = (struct irport_cb *) dev->priv;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	iobase = self->io.sir_base;
-
-	/* Stop device */
-	netif_stop_queue(dev);
-	
-	/* Stop and remove instance of IrLAP */
-	if (self->irlap)
-		irlap_close(self->irlap);
-	self->irlap = NULL;
-
-	spin_lock_irqsave(&self->lock, flags);
-	irport_stop(self);
-	spin_unlock_irqrestore(&self->lock, flags);
-
-	free_irq(self->io.irq, dev);
-
-	return 0;
-}
-
-/*
- * Function irport_is_receiving (self)
- *
- *    Returns true is we are currently receiving data
- *
- */
-static inline int irport_is_receiving(struct irport_cb *self)
-{
-	return (self->rx_buff.state != OUTSIDE_FRAME);
-}
-
-/*
- * Function irport_set_dtr_rts (tty, dtr, rts)
- *
- *    This function can be used by dongles etc. to set or reset the status
- *    of the dtr and rts lines
- */
-static int irport_set_dtr_rts(struct net_device *dev, int dtr, int rts)
-{
-	struct irport_cb *self = dev->priv;
-	int iobase;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	iobase = self->io.sir_base;
-
-	if (dtr)
-		dtr = UART_MCR_DTR;
-	if (rts)
-		rts = UART_MCR_RTS;
-
-	outb(dtr|rts|UART_MCR_OUT2, iobase+UART_MCR);
-
-	return 0;
-}
-
-static int irport_raw_write(struct net_device *dev, __u8 *buf, int len)
-{
-	struct irport_cb *self = (struct irport_cb *) dev->priv;
-	int actual = 0;
-	int iobase;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	iobase = self->io.sir_base;
-
-	/* Tx FIFO should be empty! */
-	if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
-		IRDA_DEBUG( 0, "%s(), failed, fifo not empty!\n", __FUNCTION__);
-		return -1;
-	}
-        
-	/* Fill FIFO with current frame */
-	while (actual < len) {
-		/* Transmit next byte */
-		outb(buf[actual], iobase+UART_TX);
-		actual++;
-	}
-
-	return actual;
-}
-
-/*
- * Function irport_net_ioctl (dev, rq, cmd)
- *
- *    Process IOCTL commands for this device
- *
- */
-static int irport_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct if_irda_req *irq = (struct if_irda_req *) rq;
-	struct irport_cb *self;
-	dongle_t *dongle;
-	unsigned long flags;
-	int ret = 0;
-
-	IRDA_ASSERT(dev != NULL, return -1;);
-
-	self = dev->priv;
-
-	IRDA_ASSERT(self != NULL, return -1;);
-
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
-	
-	switch (cmd) {
-	case SIOCSBANDWIDTH: /* Set bandwidth */
-		if (!capable(CAP_NET_ADMIN))
-			ret = -EPERM;
-                else
-			irda_task_execute(self, __irport_change_speed, NULL, 
-					  NULL, (void *) irq->ifr_baudrate);
-		break;
-	case SIOCSDONGLE: /* Set dongle */
-		if (!capable(CAP_NET_ADMIN)) {
-			ret = -EPERM;
-			break;
-		}
-
-		/* Locking :
-		 * irda_device_dongle_init() can't be locked.
-		 * irda_task_execute() doesn't need to be locked.
-		 * Jean II
-		 */
-
-		/* Initialize dongle */
-		dongle = irda_device_dongle_init(dev, irq->ifr_dongle);
-		if (!dongle)
-			break;
-		
-		dongle->set_mode    = NULL;
-		dongle->read        = NULL;
-		dongle->write       = irport_raw_write;
-		dongle->set_dtr_rts = irport_set_dtr_rts;
-		
-		/* Now initialize the dongle!  */
-		dongle->issue->open(dongle, &self->qos);
-		
-		/* Reset dongle */
-		irda_task_execute(dongle, dongle->issue->reset, NULL, NULL, 
-				  NULL);	
-
-		/* Make dongle available to driver only now to avoid
-		 * race conditions - Jean II */
-		self->dongle = dongle;
-		break;
-	case SIOCSMEDIABUSY: /* Set media busy */
-		if (!capable(CAP_NET_ADMIN)) {
-			ret = -EPERM;
-			break;
-		}
-
-		irda_device_set_media_busy(self->netdev, TRUE);
-		break;
-	case SIOCGRECEIVING: /* Check if we are receiving right now */
-		irq->ifr_receiving = irport_is_receiving(self);
-		break;
-	case SIOCSDTRRTS:
-		if (!capable(CAP_NET_ADMIN)) {
-			ret = -EPERM;
-			break;
-		}
-
-		/* No real need to lock... */
-		spin_lock_irqsave(&self->lock, flags);
-		irport_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
-		spin_unlock_irqrestore(&self->lock, flags);
-		break;
-	default:
-		ret = -EOPNOTSUPP;
-	}
-	
-	return ret;
-}
-
-static struct net_device_stats *irport_net_get_stats(struct net_device *dev)
-{
-	struct irport_cb *self = (struct irport_cb *) dev->priv;
-	
-	return &self->stats;
-}
-
-static int __init irport_init(void)
-{
- 	int i;
-
- 	for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
- 		if (irport_open(i, io[i], irq[i]) != NULL)
- 			return 0;
- 	}
-	/* 
-	 * Maybe something failed, but we can still be usable for FIR drivers 
-	 */
- 	return 0;
-}
-
-/*
- * Function irport_cleanup ()
- *
- *    Close all configured ports
- *
- */
-static void __exit irport_cleanup(void)
-{
- 	int i;
-
-        IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
-
-	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
- 		if (dev_self[i])
- 			irport_close(dev_self[i]);
- 	}
-}
-
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "IRQ lines");
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Half duplex serial driver for IrDA SIR mode");
-MODULE_LICENSE("GPL");
-
-module_init(irport_init);
-module_exit(irport_cleanup);
-
diff --git a/drivers/net/irda/irport.h b/drivers/net/irda/irport.h
deleted file mode 100644
index 39829cf..0000000
--- a/drivers/net/irda/irport.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      irport.h
- * Version:       0.1
- * Description:   Serial driver for IrDA
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Sun Aug  3 13:49:59 1997
- * Modified at:   Fri Jan 14 10:21:10 2000
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1997, 1998-2000 Dag Brattli <dagb@cs.uit.no>
- *     All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#ifndef IRPORT_H
-#define IRPORT_H
-
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <net/irda/irda_device.h>
-
-#define SPEED_DEFAULT 9600
-#define SPEED_MAX     115200
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN    0
-#define PORT_8250       1
-#define PORT_16450      2
-#define PORT_16550      3
-#define PORT_16550A     4
-#define PORT_CIRRUS     5
-#define PORT_16650      6
-#define PORT_MAX        6  
-
-#define FRAME_MAX_SIZE 2048
-
-struct irport_cb {
-	struct net_device *netdev; /* Yes! we are some kind of netdevice */
-	struct net_device_stats stats;
-
-	struct irlap_cb *irlap;    /* The link layer we are attached to */
-
-	chipio_t io;               /* IrDA controller information */
-	iobuff_t tx_buff;          /* Transmit buffer */
-	iobuff_t rx_buff;          /* Receive buffer */
-
-	struct qos_info qos;       /* QoS capabilities for this device */
-	dongle_t *dongle;          /* Dongle driver */
-
- 	__u32 flags;               /* Interface flags */
-	__u32 new_speed;
-	int mode;
-	int index;                 /* Instance index */
-	int transmitting;	   /* Are we transmitting ? */
-
-	spinlock_t lock;           /* For serializing operations */
-
-	/* For piggyback drivers */
-	void *priv;                
-	void (*change_speed)(void *priv, __u32 speed);
-	irq_handler_t interrupt;
-};
-
-#endif /* IRPORT_H */