tree-wide: Assorted spelling fixes

In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

29 files changed, 37 insertions, 37 deletions

diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h
index d918bbe..927e4de 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/atlx/atl2.h
@@ -442,7 +442,7 @@ struct atl2_hw {
 struct atl2_ring_header {
     /* pointer to the descriptor ring memory */
     void *desc;
-    /* physical adress of the descriptor ring */
+    /* physical address of the descriptor ring */
     dma_addr_t dma;
     /* length of descriptor ring in bytes */
     unsigned int size;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 109d278..bef0233 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
  *
  * Interrupts are handled by a single CPU and it is likely that on a MP system
  * the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
  * contention.
  */
 struct sge {
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 02d67d0..dc4eb87 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1363,7 +1363,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
  *
  *  1) down
  *  2) autoneg_progress
- *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  3) autoneg_complete (the link successfully autonegotiated)
  *  4) forced_up (the link has been forced up, it did not autonegotiate)
  *
  **/
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2fa9b36a..3af0b1b 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -587,7 +587,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
 					e_dbg("SERDES: Link up - autoneg "
-					   "completed sucessfully.\n");
+					   "completed successfully.\n");
 				} else {
 					mac->serdes_has_link = false;
 					e_dbg("SERDES: Link down - invalid"
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 997124d..e2ce8f8 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -674,7 +674,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 	/* start with one vector for every rx queue */
 	numvecs = adapter->num_rx_queues;
 
-	/* if tx handler is seperate add 1 for every tx queue */
+	/* if tx handler is separate add 1 for every tx queue */
 	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
 		numvecs += adapter->num_tx_queues;
 
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index c412e80..1dcdce0 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev)
 		 * If we missed a speed change, initialise at the new speed
 		 * directly.  It is debatable whether this is actually
 		 * required, but in the interests of continuing from where
-		 * we left off it is desireable.  The converse argument is
+		 * we left off it is desirable.  The converse argument is
 		 * that we should re-negotiate at 9600 baud again.
 		 */
 		if (si->newspeed) {
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 058fa0a..b8d21ab 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -402,7 +402,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
 		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "cleared sucessfully" : "clear failed",
+			(status == 0) ? "cleared successfully" : "clear failed",
 			wol, qdev->ndev->name);
 	}
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 894a7c8..a35845b 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3517,7 +3517,7 @@ int ql_wol(struct ql_adapter *qdev)
 		wol |= MB_WOL_MODE_ON;
 		status = ql_mb_wol_mode(qdev, wol);
 		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "Sucessfully set" : "Failed", wol,
+			(status == 0) ? "Successfully set" : "Failed", wol,
 			qdev->ndev->name);
 	}
 
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
index 89d606f..18a3be4 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/sfc/regs.h
@@ -95,7 +95,7 @@
 #define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
 #define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
 
-/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */
 #define	FR_BZ_INT_ISR0 0x00000090
 #define	FRF_BZ_INT_ISR_REG_LBN 0
 #define	FRF_BZ_INT_ISR_REG_WIDTH 64
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 12f0f5d..2ae1972 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1348,7 +1348,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-	/* disable, mask and acknowlege all interrupts */
+	/* disable, mask and acknowledge all interrupts */
 	spin_lock_irqsave(&pd->int_lock, flags);
 	int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
 	smsc9420_reg_write(pd, INT_CFG, int_cfg);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 2185248..839b1f0 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
  * @card: card structure
  *
- * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
  * chip by writing to the appropriate register. DMA is enabled in
  * spider_net_enable_rxdmac.
  */
@@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card)
 
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
-	/* set chain tail adress for RX chains and
+	/* set chain tail address for RX chains and
 	 * enable DMA */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index b571a1b..a88fcb3 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
 			break;
 
 		/* When writing back RX descriptor, GEM writes status
-		 * then buffer address, possibly in seperate transactions.
+		 * then buffer address, possibly in separate transactions.
 		 * If we don't wait for the chip to write both, we could
 		 * post a new buffer to this descriptor then have GEM spam
 		 * on the buffer address.  We sync on the RX completion
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 80b404f..ed4e9c4 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1857,7 +1857,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
  * @data - desc's data
  * @size - desc's size
  *
- * NOTE: this func does check for available space and, if neccessary, waits for
+ * NOTE: this func does check for available space and, if necessary, waits for
  *   NIC to read existing data before writing new one.
  */
 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index e3c42f5..4e4c402 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
  * NOTE: This function should be used whenever the status of any TPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the TPL status may be executed at
- * an undesireable time. When this function is used, the status is always
+ * an undesirable time. When this function is used, the status is always
  * written when the function is called.
  */
 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
@@ -2266,7 +2266,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
  * This function should be used whenever the status of any RPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the RPL status may be executed
- * at an undesireable time. When this function is used, the status is
+ * at an undesirable time. When this function is used, the status is
  * always written when the function is called.
  */
 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 2834a01..e572ecc 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1365,7 +1365,7 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 
 		__tun_detach(tun);
 
-		/* If desireable, unregister the netdevice. */
+		/* If desirable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST)) {
 			rtnl_lock();
 			if (dev->reg_state == NETREG_REGISTERED)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index eb8fe7e..8eec977 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -429,7 +429,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth,
 	    ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num);
 
 	/* Ethernet frames are defined in Little Endian mode,
-	therefor to insert */
+	therefore to insert */
 	/* the address to the hash (Big Endian mode), we reverse the bytes.*/
 
 	set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 64cdfeb..6c459f5 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m,
 		goto error_wait_for_ack;
 	}
 	rx_bytes = result;
-	/* verify the ack and read more if neccessary [result is the
+	/* verify the ack and read more if necessary [result is the
 	 * final amount of bytes we get in the ack]  */
 	result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags);
 	if (result < 0)
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 04df9bb..820b128 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed
  *     directly to wait for a reboot barker from the device.
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
- *     rom after reading the MAC adress. This is quite a dirty hack,
+ *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
  *     intialized after reading the MAC address.
  */
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 76a50ac..14f876b 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -304,7 +304,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker that will trigger the driver
  * to reinitialize the state via __i2400m_dev_reset_handle.
@@ -314,7 +314,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 98f4f8c5..99f04c4 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -246,7 +246,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the USB bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker in the notification endpoint
  * that will trigger the driver to reinitialize the state
@@ -257,7 +257,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * USB bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index f9d6db8..46a1e19 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2535,7 +2535,7 @@ void *ar9170_alloc(size_t priv_size)
 	/*
 	 * this buffer is used for rx stream reconstruction.
 	 * Under heavy load this device (or the transport layer?)
-	 * tends to split the streams into seperate rx descriptors.
+	 * tends to split the streams into separate rx descriptors.
 	 */
 
 	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5..a855a99 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd {
 
 /* Power Management */
 #define POWER_TABLE_CMD			0x77
-#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define SAVE_RESTORE_ADDRESS_CMD		0x78
 #define REPLY_WATERMARK_CMD		0x79
 #define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
 #define PD_FLUSH_N_NOTIFICATION		0x7C
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 83f2592..486c935 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it seperately and use
+		 * this means we should allocate it separately and use
 		 * rt2x00usb_vendor_request() to send the key to the hardware.
 		 */
 		reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it demands the data to be provided
-		 * both seperately as well as inside the frame.
+		 * both separately as well as inside the frame.
 		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 		 * to ensure rt2x00lib will not strip the data from the
 		 * frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index ab95346..2e5c8a1 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -100,7 +100,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * There are 2 variations of the rt2870 firmware.
 	 * a) size: 4kb
 	 * b) size: 8kb
-	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * Note that (b) contains 2 separate firmware blobs of 4k
 	 * within the file. The first blob is the same firmware as (a),
 	 * but the second blob is for the additional chipsets.
 	 */
@@ -118,7 +118,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * 8kb firmware files must be checked as if it were
-	 * 2 seperate firmware files.
+	 * 2 separate firmware files.
 	 */
 	while (offset < len) {
 		if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 7d323a7..afee806 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@ struct rt2x00debug_intf {
 
 	/*
 	 * HW crypto statistics.
-	 * All statistics are stored seperately per cipher type.
+	 * All statistics are stored separately per cipher type.
 	 */
 	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 265e66d..5e1d516 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -397,7 +397,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
 	 * in that case it is possible that the data was
-	 * provided seperately (through hardware descriptor)
+	 * provided separately (through hardware descriptor)
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9915a09..38ffca9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -502,7 +502,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
-	 * the frame so we can provide it to the driver seperately.
+	 * the frame so we can provide it to the driver separately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 0ca5893..99459db 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ced3b6a..527368a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -1665,7 +1665,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;