diff options
author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2016-01-15 01:55:23 +0100 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-01-17 19:16:46 -0500 |
commit | a46bd63bc13b2190b343706d78deab220d5c4d45 (patch) | |
tree | 99f2f94e20b91ea3756860e596b9a556d60d7340 /drivers/net | |
parent | 2e5f9f281ee8369f56d403b4a52942f19b6978f8 (diff) | |
download | op-kernel-dev-a46bd63bc13b2190b343706d78deab220d5c4d45.zip op-kernel-dev-a46bd63bc13b2190b343706d78deab220d5c4d45.tar.gz |
net: phy: at803x: Clean up duplicate register definitions
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/phy/at803x.c | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 333c1bc..f2c4e8d 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -20,9 +20,12 @@ #include <linux/gpio/consumer.h> #define AT803X_INTR_ENABLE 0x12 +#define AT803X_INTR_ENABLE_INIT 0xec00 #define AT803X_INTR_STATUS 0x13 + #define AT803X_SMART_SPEED 0x14 #define AT803X_LED_CONTROL 0x18 + #define AT803X_WOL_ENABLE 0x01 #define AT803X_DEVICE_ADDR 0x03 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C @@ -31,13 +34,13 @@ #define AT803X_MMD_ACCESS_CONTROL 0x0D #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E #define AT803X_FUNC_DATA 0x4003 -#define AT803X_INER 0x0012 -#define AT803X_INER_INIT 0xec00 -#define AT803X_INSR 0x0013 + #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E + #define AT803X_DEBUG_REG_0 0x00 #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + #define AT803X_DEBUG_REG_5 0x05 #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) @@ -280,7 +283,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev) { int err; - err = phy_read(phydev, AT803X_INSR); + err = phy_read(phydev, AT803X_INTR_STATUS); return (err < 0) ? err : 0; } @@ -290,13 +293,13 @@ static int at803x_config_intr(struct phy_device *phydev) int err; int value; - value = phy_read(phydev, AT803X_INER); + value = phy_read(phydev, AT803X_INTR_ENABLE); if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - err = phy_write(phydev, AT803X_INER, - value | AT803X_INER_INIT); + err = phy_write(phydev, AT803X_INTR_ENABLE, + value | AT803X_INTR_ENABLE_INIT); else - err = phy_write(phydev, AT803X_INER, 0); + err = phy_write(phydev, AT803X_INTR_ENABLE, 0); return err; } |